AMAZING Tire Chain Hack For Winter
HTML-код
- Опубликовано: 6 янв 2025
- Many of our videos are comedic & satirical & not intended to cultivate antisocial or unlawful behavior. Thank you for supporting our Channel through the below affiliate links. No price increase for you but we may receive compensation.
-Amazon - our store - wranglermart.com
-Jk Boots - www.jkboots.co...
-Radios Made Easy - radiomadeeasy....
-Amsoil - www.amsoil.com...
-GoDark Bags - godarkbags.com...
-Premier Body Armor - www.premierbodyarmor.com/wranglerstar
-Vertx - shareasale.com...
-My Patriot Supply - www.preparewithwranglerstar.com
-Eden Grow Systems - edengrowsystem...
Become A Wranglerstar Member For Exclusive Content and Perks
/ @wranglerstar
SUBSCRIBE: bit.ly/2btWfQR and turn on notifications to get them
#Proho #wranglerstar
As I get older, I dislike the cold weather more each year but when a good snow storm covers the trees, bushes and land. It reminds me how beautiful nature can be.
Its nice and sedate and peaceful, and if you have all your ducks in a row...snow removal, cozy fire, cup of coffee, it makes you feel like a conqueror.
I saw how you did it last year and assumed since I've never used or installed chains before in my life, that YOU were the expert. (Joke's on me, huh?) I really appreciate your self-deprecating sense of humor and your transparent ability to laugh at yourself. I love your stories... and your videos.
To get the chains on the rears easier:
- lay the chains down
- drive a short distance onto them
- hook the end cross chain over a tire lug behind tire
- drive forward
The tire pulls the chain up and over for you and tightens it at the same time. Still have to tighten after a short drive, but the tractor does most of the up front work. Chained mine up this week in 45 mins this weekend.
WOW amazing how the "hack" is way more difficult and time consuming than just installing them! FAIL!
Ahh you brough up my terrible memories from the Finnish army, i drove a big four axle offroad truck, imagine putting eight of those big ones on in a hurry on site! 😪 The wire trick helps alot though, place the chains behind the tyres, attach them to the tyres' tread with a wire/cord loop, drive forwards until the chains are wrapped around. Helps alot with heavy chains 😊
I deflate my tires when putting on chains, seams to work well on keeping tight,
DUDE ARE YOU SERIOUS????? U BELEIVE THIS KID HE CANT EVEN SPELL SEEMS
Mr Panda autocorrect got me
y2kxj was thinking that bit didn't wanna sound stupid if there's a certain way for these tires and chains. Lmao
Steve Sheppard yeah some times I remove the valve core, sometimes once deflated you can get just a smudge tighter.
use to do that...then lucked into a spare set of tires and just keep the chains on the R4 tread and run the others in late spring thru early fall
Watching you struggle with tire chains makes me very thankful to live where I don’t have to deal with that.
Air down the tires, tighten chains as much as you can, reinflate. That is what we do.
That doesn’t work for a skid steer so much like I’m going to be putting chains on.
+Wranglerstar I know this is 7 months late but I figured I would chime in anyway. Trucker here. I have used the blocks many times to get chains on. The thing I di differently is I place the chains on the ground with one set of cross-chains laying thru it. I lay the resty of the chain in front of the block. Then drive the wheel unto the block. Afterwards all you have to do is put the chains around the tire and tighten. Drive off the block to let the chains settle, retighten if needed, and put the bungies/springs on the chains. I never understood putting the chains on the top of the tire and then driving over the loose end.
Honestly I love your content. It's like back when my grandpa was still alive and I would help him out around the farm. Always getting into something. You give the same kind of talks in a lot of your videos as my grandpa did. Philosophy that can be applied to almost anything. thanks for all you do
Same tip applies to dropping nails or screws in the driveway.
Drive brand new tires across ONCE...
For chaining our lot trucks we used solid rubber bungee cords. Once installed, bend the hooks closed. Break a cord, no big deal, 2 bucks and put a new one on. Plus you are only pulling one cord tension instead of all the spring tensions on your star configuration.
I used to drive a semi from Denver to Gypsum CO all the time. Had to chain up a couple hundred times. First time I put chains on it took close to and hour. By the end of the winter I could put all 4 on in less than 20 minutes. Your absolutely right tighter the better.
I'd never seen a binder before until I worked for a landscaping company where we had to move huge equipment on trailers, and needed to secure it with no slack. It did take me a few times to get it straight in my head how to set them up right the first time. The ones we used were a lot bigger, and were intended to be kept on for the duration of the drive. That little one is a really cool assistant.
I’m just now starting this video and I do t know if you cover this or not but I air down the tractor tires before putting the chains on. Then after getting them as tight as I can , I air back up to help tighten them further. You don’t want the tires to be too tight because more air equals less traction. But doing this in moderation really helps
It's crazy how a whole days work only makes a 20 min video. Thanks for the hard work Cody.
you are more prepared for winter than most; cutting those tails actually makes the chains harder to get on; I put the chain over the wheel ; letting the ratchet ends of the chains (just touching) the ground (to the back)pull ahead until you can grab your tails and clip them to the ratchets than tighten and like you say in the video you have to move your vehicle a couple times to really snug up your chains; this method we use in the oilfields out west and in the north; very fast and no crawling under truck or tires; I am used to putting on doubles on both sets of duals, a steering and a trailer chain for bush driving; also carry cheater links in your tractor; very handy if you break a cross link or have to repair a chain or tails or whatever, another great video Mr Wranglerstar
looking back at your video again you hung those chains perfectly
Can you imagine how bad we would all feel for Jack if RUclips didn't exist he would never get a break from all these lessons and stories this guy tells lol
I like deflating the tires and using a chain binder to tighten the chains up. Latching them in place and then re-inflating the tire. No need for cross binders or anything. Chains will be very very tight and will not walk off the tire.
I remove the air and then install the chains, get the tension correct and then air tires back up and they are tight. Works for me. I use bungee cords for chain tensioners.
Just got that tensioner set w/binder tool for my JD2025R. Could have just used it first and prob figured it out without too much difficulty. But often it’s better to see someone doing it first. So your demo was definitely helpful. Basically watched the part about using the binder tool for the 6x tension spring set up. Got the Diamond Stud chains on back and the Vbar on front, both from Tire.Chain in Johnstown, PA. None of this stuff was cheep but now I can GO ANYWHERE IN MY BACKYARD THAT I NEED TO!!! (And I have a few acres of backyard and about a foot of snow!!!) Thanks for the video!!
I had a similar hunting camp story from decades ago. My 4 wheeler broke down so I got the bright idea to take my moms Chevy Chevette to deer camp. I somehow managed to make it up the logging roads on the mountain, but most of the exhaust was still on the mountain when I left. Chris
Those blocks are a brilliant idea. I must make some and try them for this year on my lorry when I cut the grass. Thanks.
When I used to put chains on a 4wheeler to plow snow.....I would always let air out of the tire, once the chains were as tight as I could get then.....add air, and everything was tight.
steve shep..........i bet looking at it from the side you could tell the difference if you took a picture
Added a like to this video within the first minute... you speak the truth about finding dropped items!🤣🤣🤣
"Fun" video , I have not installed chains on a tractor for over 35 years and am thankful . In the 80s when I was a fireman we had steel tracks instead of chains . They had bars that went across both dual tires and dipped down between with super heavy duty links . If I remeber they weighed about 540 pounds each . Easy to install , lay them out and drive over them , then pull them together with a come along . They were great in deep snow , but on pavement they would shake you to death . Over the years I had an extra set of steel wheels with mounted studs for winter driving . Also an extra 2 wheels with lugged snow tires with cross bar commercial chains installed when tires were deflated and perminent connecting links . Inflate and no slop or rolling . Those were for my full size van ( that also had limited slip rear end ) . Can hardly wait to see how the new snow blower works .
Chaining up, at night, in subzero(f) snow, is hard. On big truck tires, the chains weigh 20+ #. And sometimes they get twisted in storage......Thanks for bring it all back!
Our 1964 Massey is ready for the snow, the plow is done from the rebuild we did this summer and we have the blower fan and shoot rebuilt as well. Bring on the 6-8 foot drifts!
As a trucker for 22 years! You would get your chains with cam locks on them so you can wrench them down so tight. That would save a bunch of time. I can throw 6 sets on in 15 min.
The one set of chains you put on the rear tire and showed us is possibly on backwards. Should have the clips to the front and the loose ends to the rear when you drape them over the tire. I believe it has something to do with once your chains are on and you spin the tires, the clips don't have the extra bit (where the locking clip attached) forward with rotation where it could grab something. But they may still work fine all season and never grab anything... but maybe a note to self for next year.
Like the block suggestion, Thanks. Flat pry bar works great on the mower-crete. I hang my chains, no rust (light coat of oil) and out of the way.
Those are nice spring binders. I deflate my tires when tightening the chain, and run wire from links across the center, and twist them tight.
Boy am I excited for Wranglerstar winter videos!
AMAZING Tire Chain Hack For Winter
thanks for the videos Cody.
Gods blessings to all...
Right tool for the job, like I told you last year when I recommend the binder to you, glad to see you got the right tool!
My dad was a lorry driver in the UK for most of his working life. He used a tool for putting tension on chains (like the one you used, but bigger) and called it a 'warwick'. There'd be a warwick on each chain used to secure a load.
Ive always layed out the chains, drive over and hooked em up. Blocks seem good.
My dad used to be a logger. Big cleated paw chains were a necessity in the winter. we found it was easier to use the cleats on the tires and a couple of bungee straps to drive them up on and over the tire, much less work than lifting them by hand which alone would take atleast two people.
Just watched a 16 minute video of chains being put on a tractor tire... Love this life... Lmao.Keep up the great video though man! Support from NY!
Where did you purchase this chain set up?
I remember last years snow chain saga. Glad to see it’s going better this year
Use narrow tires in the snow with a lot of pressure to open up the tread and dislodge the snow. Big tires good only for showing off.
Tires look dope asf with the chains on
Watch as never know when a piece of information is going to be needed and with Cody, always unrelated nuggets of knowledge and wisdom mixed in.
To tighten tire chains I deflate the tire, install the chains as tight as I can, then inflate the tire. Presto! Chains are super tight.
Those are going to be awsome with the snow blower on the tractor, at the moment I've only been afforded a 2wd f150 and 2 chains that I fount at the flea market but it worked pretty good last year as long as my front tires have good tread.
you know that caster tip is really good cause it all ways happens nice one Cody.
You need to hang them on a wall to keep them separated . And color coded the chains for the equipment you use. As a truck driver I have put a set on the truck and trailer in a half hour I put out on the ground in front of the tires ( Straight) than drove on to them but your back tire is bigger. If I was you I would give it a try. And with the ramp blocks I would put some metal studs in it so if you had to drive onto them you won’t slip as much.
Now that's what I'm talking about. Getting rid of those small annoyances makes everything SO much more pleasant to use. Even if there was no real difference in the usability. It's the state of mind that matters the most.
next year you can just rewatch this vid to give yourself a refresher and thats an advantage.
Looks like a lot work to put those heavy tire chains on. Good luck with putting on the other two ! Thanks !
I was a trucker and generally avoided having to have to put chains on. Sometimes it was unavoidable, but it was rare as state DOT organizations pretty much started to shut down interstates and you don't use chains on the flats. only mountains.
LOL I understand your frustrations Cody. The wheels find everything on the floor.
Grab one of those timbers by Jack's bridge, knock a corner off lengthwise, put it at the slab edge for your bldg, and have an easier time pulling equipment inside. It's hard to pull up that vertical stepped edge.
Or just drop a shovel or two of gravel in front of the step and make a ramp. Works just as well
Or put the tractor in 4 wheel drive.
If you go fast enough with your 12 foot mower, your 10 foot door is suddenly bigger!
This life hack also works when you're backing up with a tall trailer into a low clearance doors
place chain on tire . drive forward a quarter of a wheel rotation and hook the cam to the chain . drive forward a three quarter of wheel rotation and tighten cam on the chain inside first and outside last . takes two minutes to install chains no jack required . did it that way on my semi for 20 years . i can chain all 8 drives in 20 minutes and chains stay very tight no play in them at all
Great job on the chains Mr. W.
Got to tell you, it just doesn’t come up much in Jacksonville, Fl. I have hunted with friends in the Judith Mountains near Lewistown, Mt. This
Year, for the first time, we had to use chains and I learned about installing chains. Wish we’d have had your chain tensioner.
On our work trucks we just hook the ends of the chain back in the lock assembly that hooks the chain together and it keeps it from floping around. We have to put the chains on in the snow so it's best to keep the extra length so they are easier to put on in bad weather. I'll have to carry a small chain binder too. Great idea!
Cody I hope you and your Family do some of those Christmas stories this year
1/4 ton come along from harbour freight will do wonders.
in Canada we use snappi hooker tarp straps for cross tighten.
Those “no chains down in a dark canyon” stories are the ones we tell for a lifetime. Haha. Loved that story! Had a similar one goofing around one afternoon and ended up in a ditch that at least two other people had also found. By the time we found it the depth was about mirror deep. Took 3 come alongs, hours and several loggers to get our pickup out of the mud pit. My dad always said “4wd just gets you twice as stuck”. Hah.
lot's of idiots out there with 4 wd that have no idea how to drive them. I especially love the guys that get stuck and then put their rig in 4 wheel low. Yeah, let's see how much we can spin our tires.
i sure enjoy the old traditional pre chinisium-19 videos.
Nice tutorial on the chains. I have used chains once in my life and I remember it being a big hastle.
I do like your chain tensioners, sure beats rubber straps I was using.
On The Dalton Highway in AK we were throwing chains daily. Its all how u hang them on the rack. Some guys get both on in 5 min.
Great video Cody. Most truck drivers in my area have an old addage When the roads get too slippery to have to chain up its time to find a rest area or truck stop and get off the roads until the highway crews can do their jobs. Most companies in my area do not give their driver's tire chains.
Good vid. Maybe Buy 4 individual containers to Put the chain assy for each tire in its own box. Label Boxes front or Rear Chains. Then u could put in one bigger box if needed. You Could even make Wooden trays instead of boxes in a 4 Tiered Wooden Dolly on Wheels.
If you do the bottom spring last you can step on the center ring instead of crowing your lugs.
I bet you could make a nice chain hanger on the wall to avoid tangles. 😉
So I just came across this videos! First off I like your videos clear and down to the point. Second you need one more tool for your chains for the connecting link. Little wrench that fits in the slot on the link. We use steel rod to make a L the pound the end flat to fit in the slot works great!!
Literally feels like you just took the chains off last month!! Man the time has flew by this summer..... never enough time :)
I can’t wait watch that thing chuck snow!
For the rears, I jack up the wheels. I have trouble with the wheel rolling the chains off. As someone mentioned, I use a ratchet strap to pull the chain all the way around to hook the inside. Much easier than how I did it in the past.
I noticed that the caps of the hydraulic lines are tangeling around while having the lines plugged in. You can stick the caps together to keep them clean an not tangeling.
Greetings from Germany!
The only tools I own are a hammer and a screwdriver, but somehow I'm captivated by your videos.
Moral of the story IS; checking the weather report BEFORE you go hunting in Hells Canyon!!😉🤣
Try laying them out behind the tire and then back on to them. Then it is a simple task to just pull them up onto the tire.
idea to make that tensioner a little better is instead of having solid pins run through the lever action it should be an inside threaded pin then you can use a threaded hook and if you need an inch just unscrew the pin a bit so you dont have to use a crow bar to help. this would help you adjust larger tires and smaller tires using the same tool. just food for thought if you wanted to make your own version. :)
i usually lay the chains on the ground drive over em hook the start on the wheel drive 3/4 of the wheel diameter forward, so its easy attachment and tightening sometime later when i remember.
Hey Ranger start Do you think you can do a video series about important tools for a beginner truck kit
Scraping off the mud from around the blades looks soooooooooo satisfying... i'd loce to do that haha
Raising the back of the tractor with a floor jack allows you to turn the tires and install the chains much easier.
Video series for you, Build a truck with Jack for Jack, Make it old, make it cool, Lots of content, and it will teach your boy the mechanics
That is what that's for ,I got some of those tools an I would've never known thanks for that
I think that shortening the end of the hook on that small binder would make it work even better. You don't need to go 1/2-3/4 of an inch past the link you want to grab.
00:31 to 00:54 Words of wisdom.. right there, so true happens & all the time. Thanks for the vid.
I remember having to make a set with grandpa back when I was younger
that tool you have there looks like what my dad always called a comealong. He used bigger ones to take slack out of chains when hauling equipment when he had his pipeline company.
Can you use ammo cans to help organize and store the tire chains or would it he easier to have them hanging on the wall somewhere?
Do you still carry on the regular while on the homestead?
I have used one of those small boomers for years putting the chains on my tractor. A suggestion, forget the wood blocks for installing the rear chains. Get a 10 to 20 ton bottle jack and lift the rear tire off the ground. You can then rotate the tire the same as the front. By the way, lose the mower before you start chaining up.
You could cut a small amount off of one of those hooks and it would be easier to hook on.
Aloha, From Hawaii I just started watching your videos and I Like your Videos and I hope you keep it going.. Have a Merry Christmas to you and your family..
Moral of story is to have a good winch!
Airing the tires down before putting the chains on and reinflating helps to get them good and tight.
I'm ready for the snow!
Stanley Steamer me too
The moral of the story is Check The Weather . I love those Broncos . Had a old Toyota Land Cruiser myself . Wish I still did .
This was 30 years ago in a remote spike camp. How should I have checked the weather Mike?
Wranglerstar haha I was joking . I was caught in the mountains in 73-74 by snow . Figures ! Great vids Cody !
I don't know but personally I'd be jacking the rear tires up too. Seems the front tire chains went on a lot easier by taking the tire off the ground. : )
The front tires are a quarter the weight and size of the rear tires,
8:10 another great example of Cody trashing a tool before he knows how to use it! Love your videos keep them coming.
I have what I think might be a labor saving shortcut. I don’t have the tools, but i can give the instructions. I would like to see you do a demo and see if it works. This is what i refer to as the
C.A.L.T.M.
CHEAP.AND.LAZY.TRUCKER.METHOD.
I have been driving semi trucks for last 25 years. And i thought of this tonight while driving through Colorado this December 2019...sorry it took so long🤪👍
1.Ok take a motorcycle ratchet strap and hook the short end to the front end of the chain cross row closest to the front of the chain by the cam and hook linking end
2. Line a bottom of the hole in the tractors rim to the 9 O’clock or maybe 7 O’clock position where 9 or 7is the left side of tire and 3 or 5 is right side of tire where clockwise goes forward on tractors right side.
3. Hook short end of ratchet strap to outside of tire sidewall to front cross link as described in step one.
4. Thread long slack end through the hole and hook other side of chain across the inside of tire.
5. Take slack out of webbing and ratchet chain to tire as tight as you can. Set up other tires same way if you want. Or one at a time. With rest of chain pulled straight back, drive tractor forward until chain is in (possibly) 9 O’clock position and hook the ends together.
6. After chain is connected unhook ratchet strap and tighten as normal.
In other words strap the chain to the chain and rim and make tractor tire/rim pull the chain over....we are not getting younger ya know👍🤪👍
Tip number 2.
Stacking chains in a pile/box.
1.Spray paint the cam and hook end. Hook those two ends together.
2.Drop in a pile but before letting go, leave the hook and cam to stick out of pile edge or over top of box.
3. The rest is in the pile un attached. When you need a chain grab a connected end and pull.
Please let me know if this helps... via video if possible 😀👍