Two Trees SP5 V3 does not recognise the Bin file and boots normally. The wifi card transmits its webpage and accepts the bin file as firmware upgrade but the Two Trees menu does not have Wifi option added.
Fantastic upgrade. Please,please,please translate your software to full english GUI!!!! Many users from outside China would love to use it, but can not, because it is partly English partly Chinesse. And please also add camera functionality, so we can add any cheap IP camera ( 1 or more ) and view the printing in CURA.
It has been updated the sending file function: github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware. And you can refer to the wiki:github.com/makerbase-mks/MKS-Robin-Nano-V2.X/wiki/Use-MKS_Robin_WIFI-on-Robin-Nano
So, in Robin Nano v3 it is not possible to send a .gcode file from my computer to the SD? Only via sending commands to through Cura-plugin or Pronterface? We are the same as with my old MKS Gen 1.4? In this video, I don't see the possibility to send the .gcode file from the computer to the SD inside Robin
I can only connect to the printer through Wifi with Cura 15.04.6 from the MKS github page. I have attempted numerous times to use Cura 4.9 and 4.10 with the MKS Wifi plugin from the Cura Marketplace and from github. Cura will not see the printer, and I can not manually add the printer. Without making any changes, if I load Cura 15.04.6, I can add the printer and connect just fine. I would think that this issue could be caused by Firewall rules in my router, except that Cura 15.04.6 will connect.
I will test it again after my current print is finished, but unless the plugin on the GitHub page was updated within the last six hours, I have already tried it with both 4.9 and 4.10. I also updated the wifi module firmware. I will test it again and if I still have no luck I will try Cura 4.7 or 4.8, or just give up until I switch firmware to RepRap or Klipper. wireless wasn't my priority, nor the deciding factor when I purchased the nano v3 package, so the wifi module was basically a free bonus for me.
@@makerbaseteam4217 I never choose the ultimaker machines. I have always chosen Creality3d Ender 3 when installing, as my machine was the Ender 3. I just tested with Cura versions 4.8 (marketplace and GitHub plugins), and 4.9 and 4.10 with only the GitHub plugin, and none of these see the printer, but I can connect with Cura 15.04.6 and I can access a web based configuration page. I appreciate your input, but as I have said, wireless is not my priority so I am not going to devote any more time to trying to fix the issue. The MKS Robin Nano V3 and the TS35 screen both work great and my printer has never ran more silently. I am happy with the results either way.
I have an "Elegoo Neptune 2" printer and want to install this module. It fits perfectly on the mainboard but it won't flash as you show it in the video. How can I fix this? Thank you!
Did you ever solve this problem? I have a neptune 2s, and I was able to flash the drive and have it display on screen, but I do not get the AP list, and if I enter my AP name and password in the .txt file, it just never connects, in scan mode it just scans forever.
This does not seem to work for the Robin Mini board using the latest firmware. I have the Wifi module installed, but the wifi screen does not allow a network to be chosen or a password to be entered. In Marlin 2.0, there is no menu option to view network info at all after compiling. Please help. Edit: I got it to connect on original firmware, but not on Marlin.
I am using Robin MKS in three printers here. I am a senior Marlin user. If you can move away from Marlin for now. the original firmware on the Robin MKS is perfekt and works really flawless. Unless you have very special features that you need and can only find in Marlin, you can switch to Robin firmware and you won´t miss a thing. It is really good!
@@MAButh Auto bed leveling, as well as being able to fine tune printer settings on the fly. The main thing I wanted to do after getting marlin setup the way I wanted was to transfer gcode files wirelessly to the SD card, but that isn't worth it to me if I have to lose all other features. I already redid some of the old firmware's UI icons. Anyway, i'm disappointed with Makerbase here, as they seem to have passed on supporting this old board in favor of newer ones, and I'm not buying a new board when the current one works fine.
@MetalGearSortof did you find the configuration file that they were talking about because in the GitHub page for the wifi on the config.h there isn’t a place to put your wifi credentials in
I followed the steps here for my Robin nano v1.2. The firmware updates for the nano and the wifi seemed to be sucessful. No errors. However my wifi still does not find any hotspots. Any suggestions? Thanks.
Hello, you can configure the wifi password and name in the wifi configuration in the configuration file, and then update the configuration file to confirm whether your wifi module can work normally
@@NorDesigns I must have. My 3d printer connects to my wifi. Its been 2 years though and I can barely remember what I had for breakfast. Good luck bud.
@@Ryan_Tidwell safer for me is hardwiring the pi with a step down converter. Completely new to 3d printing. Prolly about 2-3 weeks in. Is kipper superior? If so why?
hello my problem is the following I have a mks robin nano V1.2 with marlin 2.0 the wifi module works correctly but when trying to upload a gcode from Cura it always gives me an error, the rest works correctly.
It has been updated the sending file function: github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware. And you can refer to the wiki:github.com/makerbase-mks/MKS-Robin-Nano-V2.X/wiki/Use-MKS_Robin_WIFI-on-Robin-Nano
Hi Makerbase Team! I did everything like in your Video. After Updating the Firmware of the 8266 and tapping on WIFI. I get the Message "The wifi module is being configured please wait a moment... (Cancel)" But NOTHING happens after waiting for a long. I have a Elegoo Neptune 2 with a 1.0.2 Board and "Marlin -bigfix2.0.x-MKS-2.1.3" on it. Please help me!
Hi ! I've the same problem. I try to flash but nothing change.... I've the same message ! Any idea how to reset this module or something like that ? Thanks !
@@makerbaseteam4217 so what UI does support WiFi? I have a TwoTrees BluerPlus with a 480 x 272 display, and I use M600 all the time, so I cannot use LVGL. I'm running marlin 2.1
Sir, the character limit for the password is 16 characters. This cannot be changed. If the wifi password is too long, it is recommended to reduce the length of the password.
Is the address of the wifi plug-in? Or IP address? The ip address needs to look at the ip on your screen, and your computer needs to be on the same network as it
@@makerbaseteam4217 Thanks for the reply but I meant for the link to the firmware update. If I just google search I get several different download links and I'm not sure which one I need. I tried to connect to the address in the video but I just get a 404.
super vidéo par contre je ne peut pas rentrer mon mot de passe wifi en entier seulement 17 caractères sur les 20 par contre si je doit le changer c'est pas pratique car je doit modifier toute mon installation qui est déjà paramétré le mieux serai d'étendre a 20 caractère (la normes) la possibilité du mot de passe wifi et pareil je n'ai que le réseau 2.4gh pas d'accès au réseau 5gh
@@makerbaseteam4217 je cherche a avoir lapplication MKScloud pour android mais le lien de la video ne fonctionne pas chez moi baizhongyun.cn/home/downloadview me donne 502 bad gateway
It is compatible with nano 1.2 and 2.0, the firmware has been updated : github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware. And you can refer to the wiki:github.com/makerbase-mks/MKS-Robin-Nano-V2.X/wiki/Use-MKS_Robin_WIFI-on-Robin-Nano
This video is out of date. CURa 4.10 does not work with wifi. Download the new CURA and shoot a new video. Delete this video. It's nonsense. You all give nonsense here.
Two Trees SP5 V3 does not recognise the Bin file and boots normally. The wifi card transmits its webpage and accepts the bin file as firmware upgrade but the Two Trees menu does not have Wifi option added.
Following this video, now, I can use my EasyThreed X2 printer via WiFi. Thanks!
Fantastic upgrade. Please,please,please translate your software to full english GUI!!!! Many users from outside China would love to use it, but can not, because it is partly English partly Chinesse. And please also add camera functionality, so we can add any cheap IP camera ( 1 or more ) and view the printing in CURA.
Chinglish
Since the hardware is the same do you also have a dedicated software for the Flsun SR Super Racer?
I bought the Robin nano V2. With wifi I can only send commands to the printer. When will the firmware to send files be available?
It has been updated the sending file function: github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware. And you can refer to the wiki:github.com/makerbase-mks/MKS-Robin-Nano-V2.X/wiki/Use-MKS_Robin_WIFI-on-Robin-Nano
So, in Robin Nano v3 it is not possible to send a .gcode file from my computer to the SD? Only via sending commands to through Cura-plugin or Pronterface? We are the same as with my old MKS Gen 1.4?
In this video, I don't see the possibility to send the .gcode file from the computer to the SD inside Robin
I can only connect to the printer through Wifi with Cura 15.04.6 from the MKS github page. I have attempted numerous times to use Cura 4.9 and 4.10 with the MKS Wifi plugin from the Cura Marketplace and from github. Cura will not see the printer, and I can not manually add the printer. Without making any changes, if I load Cura 15.04.6, I can add the printer and connect just fine.
I would think that this issue could be caused by Firewall rules in my router, except that Cura 15.04.6 will connect.
New plugins are required for cura4.9 and 4.10, the plugins have been uploaded to github
I will test it again after my current print is finished, but unless the plugin on the GitHub page was updated within the last six hours, I have already tried it with both 4.9 and 4.10. I also updated the wifi module firmware. I will test it again and if I still have no luck I will try Cura 4.7 or 4.8, or just give up until I switch firmware to RepRap or Klipper. wireless wasn't my priority, nor the deciding factor when I purchased the nano v3 package, so the wifi module was basically a free bonus for me.
@@moxlon69 I have tested it. If it doesn’t work, don’t choose the Ultimaker machine when setting the model on cura, you can choose other machines.
@@makerbaseteam4217 I never choose the ultimaker machines. I have always chosen Creality3d Ender 3 when installing, as my machine was the Ender 3. I just tested with Cura versions 4.8 (marketplace and GitHub plugins), and 4.9 and 4.10 with only the GitHub plugin, and none of these see the printer, but I can connect with Cura 15.04.6 and I can access a web based configuration page. I appreciate your input, but as I have said, wireless is not my priority so I am not going to devote any more time to trying to fix the issue. The MKS Robin Nano V3 and the TS35 screen both work great and my printer has never ran more silently. I am happy with the results either way.
I have an "Elegoo Neptune 2" printer and want to install this module. It fits perfectly on the mainboard but it won't flash as you show it in the video. How can I fix this? Thank you!
Need to enable wifi and wifi scanning in the configuration file, and also need to plug in the wifi module
Did you ever solve this problem? I have a neptune 2s, and I was able to flash the drive and have it display on screen, but I do not get the AP list, and if I enter my AP name and password in the .txt file, it just never connects, in scan mode it just scans forever.
The plugin it works wih the combination of MKS SGEN_L + MKS TFT35 + Wifi device installed on TFT35?.
Thanks,
Jose
This does not seem to work for the Robin Mini board using the latest firmware.
I have the Wifi module installed, but the wifi screen does not allow a network to be chosen or a password to be entered.
In Marlin 2.0, there is no menu option to view network info at all after compiling.
Please help.
Edit: I got it to connect on original firmware, but not on Marlin.
Robin mini motherboard can configure WiFi password and name through configuration file, marlin firmware interface does not support this module yet
I am using Robin MKS in three printers here. I am a senior Marlin user. If you can move away from Marlin for now. the original firmware on the Robin MKS is perfekt and works really flawless. Unless you have very special features that you need and can only find in Marlin, you can switch to Robin firmware and you won´t miss a thing. It is really good!
@@MAButh Auto bed leveling, as well as being able to fine tune printer settings on the fly.
The main thing I wanted to do after getting marlin setup the way I wanted was to transfer gcode files wirelessly to the SD card, but that isn't worth it to me if I have to lose all other features. I already redid some of the old firmware's UI icons.
Anyway, i'm disappointed with Makerbase here, as they seem to have passed on supporting this old board in favor of newer ones, and I'm not buying a new board when the current one works fine.
@MetalGearSortof did you find the configuration file that they were talking about because in the GitHub page for the wifi on the config.h there isn’t a place to put your wifi credentials in
@@stoopy9326 I did, but it didn't work on Marlin for this board. The wifi only works for the stock firmware, so i gave up on that feature.
I followed the steps here for my Robin nano v1.2. The firmware updates for the nano and the wifi seemed to be sucessful. No errors. However my wifi still does not find any hotspots. Any suggestions? Thanks.
Hello, you can configure the wifi password and name in the wifi configuration in the configuration file, and then update the configuration file to confirm whether your wifi module can work normally
Did you get it to work?
@@NorDesigns I must have. My 3d printer connects to my wifi. Its been 2 years though and I can barely remember what I had for breakfast. Good luck bud.
@@Ryan_Tidwell I might give it a shot but scared to flash firmware. Running everything on octoprint rn.
@@Ryan_Tidwell safer for me is hardwiring the pi with a step down converter. Completely new to 3d printing. Prolly about 2-3 weeks in. Is kipper superior? If so why?
hello my problem is the following I have a mks robin nano V1.2 with marlin 2.0 the wifi module works correctly but when trying to upload a gcode from Cura it always gives me an error, the rest works correctly.
It has been updated the sending file function: github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware. And you can refer to the wiki:github.com/makerbase-mks/MKS-Robin-Nano-V2.X/wiki/Use-MKS_Robin_WIFI-on-Robin-Nano
A placa de wifi infelizmente ainda é inútil em mks robin nano. Não tem utilidade nenhuma enquanto não atualizarem o firmware
Hi Makerbase Team!
I did everything like in your Video.
After Updating the Firmware of the 8266 and tapping on WIFI.
I get the Message "The wifi module is being configured please wait a moment... (Cancel)"
But NOTHING happens after waiting for a long.
I have a Elegoo Neptune 2 with a 1.0.2 Board and "Marlin -bigfix2.0.x-MKS-2.1.3" on it.
Please help me!
Configuring wifi is searching for nearby wifi, is there wifi nearby?
@@makerbaseteam4217 yes, the button "Wifi" is there but It stucks in "The wifi module is being configured please wait a moment... (Cancel)"
@@sbonness Please update the wifi firmware
Hi ! I've the same problem. I try to flash but nothing change.... I've the same message ! Any idea how to reset this module or something like that ? Thanks !
Same problem, any solution?
Hi makerbase team
Is it possible to install this module on robin nano v3.1 and mks TS35 v2.0 with TFT_COLOR_UI interface? and how?
color ui does not support WiFi
@@makerbaseteam4217 so what UI does support WiFi? I have a TwoTrees BluerPlus with a 480 x 272 display, and I use M600 all the time, so I cannot use LVGL. I'm running marlin 2.1
Hello, I installed wifi module for two trees bluer but it fits 17 characters on wifi password screen. How can I fix my shimfre 18 characters.
Sir, the character limit for the password is 16 characters. This cannot be changed. If the wifi password is too long, it is recommended to reduce the length of the password.
@@makerbaseteam4217 Or maybe just type the first 16 characters. Maybe it ignores at the router but takes in the wifi config.
Can i connect a camera to this ?
The mainboard doesn't support camera.
A link would be great, I can't connect to the address in the video.
Is the address of the wifi plug-in? Or IP address? The ip address needs to look at the ip on your screen, and your computer needs to be on the same network as it
@@makerbaseteam4217 Thanks for the reply but I meant for the link to the firmware update. If I just google search I get several different download links and I'm not sure which one I need. I tried to connect to the address in the video but I just get a 404.
@@zoghunter82318 This is the link to the wifi firmware: github.com/makerbase-mks/MKS-WIFI/tree/master/firmware_release
How can I use the wifi module in Marlin?
If robin wifi is used in marlin, you can refer to this setting
github.com/makerbase-mks/MKS-Robin-Nano-V2/wiki/MKS_Robin_WIFI
@@makerbaseteam4217does that also work with Robin nano V1.2?
@@hdd1536 Yes, it works both .
Prusa slicer möglich ?
how can activate lcd display?
super vidéo par contre je ne peut pas rentrer mon mot de passe wifi en entier seulement 17 caractères sur les 20
par contre si je doit le changer c'est pas pratique car je doit modifier toute mon installation qui est déjà paramétré
le mieux serai d'étendre a 20 caractère (la normes) la possibilité du mot de passe wifi
et pareil je n'ai que le réseau 2.4gh pas d'accès au réseau 5gh
Yes, the wifi password of this version of the firmware has only 16 characters, and the latest version of the marlin firmware has 32 characters
@@makerbaseteam4217 ok très bien
Auriez-vous un liens avec une vidéo pour effectuer cette mise à niveau vers marlin 2.0
@@makerbaseteam4217 je cherche a avoir lapplication MKScloud pour android mais le lien de la video ne fonctionne pas chez moi
baizhongyun.cn/home/downloadview
me donne 502 bad gateway
How too configure mkscloud and link download app, app link notworking
Robin nano2.0 is it compatible?
We are developing the firmware to support wifi module now
It is compatible with nano 1.2 and 2.0, the firmware has been updated : github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware. And you can refer to the wiki:github.com/makerbase-mks/MKS-Robin-Nano-V2.X/wiki/Use-MKS_Robin_WIFI-on-Robin-Nano
@@menli7686 thank you dude :)
please drivers for flsun q5
Add Android app to Google play store, please!
cura does not say wifi there.
Cura needs to install the mks plugin to connect to wifi
This video is out of date. CURa 4.10 does not work with wifi. Download the new CURA and shoot a new video. Delete this video. It's nonsense. You all give nonsense here.
The new version of cura requires a new plug-in, the usage method is the same, only the plug-in version is different