Apagando comentários meus caros? Que bom que adicionaram a transferência de arquivos por wifi, agora a placa já não é totalmente inútil para MKS Robin nano V2. Falta enviar a função ao Marlin Oficial. Parabéns pelo desenvolvimento!
Hi ! I'm trying to use the wifi module with my TFT 28. flashed the latest firmware from your github (which is 3.0.6) , set my connection information in mks_config.txt. the module updated correctly and obtains an IP from the network and I can access the config web page using that IP. but the the state STA remains 'disconnected' and I can't connect with pronterface or cura using the plugin. AP mode doesn't work either. It's a weird issue indeed. Tried different settings to no avail. Do you have an idea on what I could try to make it work ?
@@makerbaseteam4217 yes that's correct. I have 2 SSID here so I tried both to no avail. Even tried to giva a bad password on purpose to see what happens. In that case the IP remains 0.0.0.0 so it's not an authentication problem
hello my problem is the following I have a mks robin nano V1.2 with marlin 2.0 the wifi module works correctly but when trying to upload a gcode from Cura it always gives me an error, the rest works correctly.
Is there a TF card inserted on the motherboard? The files transferred by wifi need to be saved to the TF card, otherwise there will be transmission errors
@ManoMx1 hello, I just bought the wifi module for Robin nano and I don't know how to register to have a login with a password that asks for it in the app. How did you get the module to work?
Mine doesn’t give me the option to connect to my router/network, it’s set as an access point/AP mode, and has its own network to connect to… but that’s cumbersome… because I have to keep switching between internet/network file system, and the cnc machines file system…. How do I change it to be able to connect to the network that everything else is on?
@@makerbaseteam4217 another question…. The firmware that come on the kit…. Can I use this with a 3018 cnc? It’s a laser cutting firmware, from looking at the options on the screen.??
@@makerbaseteam4217 ive looked at the firmwares… but I don’t know wich one to install…. Can you give me the link and filename for the firmware I need for the MKS-DLC (V2.1)and TFT35 (V1.0)
bonjour j'utilise une MKS DLC V2 avec un écran TFT35 et je viens d'acheter le module WIFI ESP, j'utilise le matériel pour un LASER donc avec un firmware CNC, je n'arrive pas a booter sur le fichier MKSWIFI.bin
Hola, podrían decirme por favor, que plugin utilizaron para guardar como archivo TFT, porque utilice un plugin que encontré por ahí pero no me aparece esa opción, gracias.
@@makerbaseteam4217 Hello, thanks for answering, but I was referring to the plugin to save the files as TFT from cura for version 4.6.2, thanks, greetings from Colombia
Hi Makerbase Team! I did everything like in your Video. After Updating the Firmware of the 8266 and tapping on WIFI. I get the Message "The wifi module is being configured please wait a moment... (Cancel)" But NOTHING happens after waiting for a long. I have a Elegoo Neptune 2 with a 1.0.2 Board and "Marlin -bigfix2.0.x-MKS-2.1.3" on it. Please help me!
Can I use this with MKS SGEN_L V2.0? There is a port on SGEN_L v2.0, but I want to use it with the MKS H43 touch screen. Is there any tutorial to do that? Thanks in advance.
hola, coloque la aplicación en ingles pero la mitad de las opciones me aparecen en chino, no puedo agregar la impresora
Please consider making a plugin compatible with prusaslicer🙏🏻
It works now with prusa slicer
Cuando crearan plugin para Slic3r?
Tengo una MKS Sgen_L , TFT 35 con wifi. Cual es el firmware que debo instalar??
Hi, no plugin for slic3r now, we are gethering the opinins from the users
Apagando comentários meus caros? Que bom que adicionaram a transferência de arquivos por wifi, agora a placa já não é totalmente inútil para MKS Robin nano V2. Falta enviar a função ao Marlin Oficial. Parabéns pelo desenvolvimento!
Ae mano, conseguiu criar uma conta p usar esse app? Não consegui de jeito nenhum, até inserindo manualmente os dados
Not relation but can you give me background on desktop? It very nice
Will there be a completly teanslated cloud app in a not-so-distant future?
Hi ! I'm trying to use the wifi module with my TFT 28. flashed the latest firmware from your github (which is 3.0.6) , set my connection information in mks_config.txt. the module updated correctly and obtains an IP from the network and I can access the config web page using that IP. but the the state STA remains 'disconnected' and I can't connect with pronterface or cura using the plugin. AP mode doesn't work either. It's a weird issue indeed. Tried different settings to no avail. Do you have an idea on what I could try to make it work ?
Hello, are the wifi name and wifi password you configured in the firmware correct for the one you want to connect?
@@makerbaseteam4217 yes that's correct. I have 2 SSID here so I tried both to no avail. Even tried to giva a bad password on purpose to see what happens. In that case the IP remains 0.0.0.0 so it's not an authentication problem
@Sosso Mund Hello, have you set the wifi mode to ap mode on the screen? Is it possible to connect to wifi, but does not display ip?
@Sosso Mund You can try to connect to other wifi
Good product and nice video. Where I can find the smartphone app?
So if you open the app you quickly realize up want to through all MKS stuff out the window... Sweet...
So as in the video, I can only see Save as file, not Print over.... you cut the video and instantly appear the print over menu. How?
hello my problem is the following I have a mks robin nano V1.2 with marlin 2.0 the wifi module works correctly but when trying to upload a gcode from Cura it always gives me an error, the rest works correctly.
Is there a TF card inserted on the motherboard? The files transferred by wifi need to be saved to the TF card, otherwise there will be transmission errors
The file name must be very very short
@ManoMx1 hello, I just bought the wifi module for Robin nano and I don't know how to register to have a login with a password that asks for it in the app. How did you get the module to work?
Mine doesn’t give me the option to connect to my router/network, it’s set as an access point/AP mode, and has its own network to connect to… but that’s cumbersome… because I have to keep switching between internet/network file system, and the cnc machines file system…. How do I change it to be able to connect to the network that everything else is on?
Are you using a TFT screen? Set bit sta mode in the configuration file, enter the wifi password and name
@@makerbaseteam4217 another question…. The firmware that come on the kit…. Can I use this with a 3018 cnc? It’s a laser cutting firmware, from looking at the options on the screen.??
@@advancedenergy7277 After the motherboard updates the CNC firmware, it can be used on the 3018. We use the 3018 machine for testing.
@@makerbaseteam4217 ive looked at the firmwares… but I don’t know wich one to install…. Can you give me the link and filename for the firmware I need for the MKS-DLC (V2.1)and TFT35 (V1.0)
@@advancedenergy7277 github.com/makerbase-mks/MKS-TFT/blob/master/MKS_TFT_CNC/MKS_TFT35_CNC_V1.0.3%20Release%20file.rar
bonjour j'utilise une MKS DLC V2 avec un écran TFT35 et je viens d'acheter le module WIFI ESP,
j'utilise le matériel pour un LASER donc avec un firmware CNC, je n'arrive pas a booter sur le fichier MKSWIFI.bin
Are you using the mks Wifi module? Download the latest firmware from the following link: github.com/makerbase-mks/MKS-TFT/tree/master/MKS-TFT-laser
Some of us don't like Cura.. I'd like support for prusa slicer.
Not yet supported
Previeux Function: Is it possible have it implemented without wifi
Hola, podrían decirme por favor, que plugin utilizaron para guardar como archivo TFT, porque utilice un plugin que encontré por ahí pero no me aparece esa opción, gracias.
Here is the link to download the cura plugin: github.com/makerbase-mks/mks-wifi-plugin
@@makerbaseteam4217
Hello, thanks for answering, but I was referring to the plugin to save the files as TFT from cura for version 4.6.2, thanks, greetings from Colombia
Thank you very much, but I already solved the problem, installed the WIFI plugin and the TFT plugin worked correctly.
@@jaidivergomezquintero9765 OK, awesome
Plugin doesn't work, causes Cura 5.0 and Cura 4.13.1 to crash, can't use.
It works and very well
neopixel tutorial on the mks robin e3d marlin 2.0.6 please thx.
You can refer to this video: github.com/makerbase-mks/MKS-Robin-E3-E3D/wiki/Upgrade-with-Neopixel-lights
buen trabajo una vez más...
Thanks
Hi Makerbase Team!
I did everything like in your Video.
After Updating the Firmware of the 8266 and tapping on WIFI.
I get the Message "The wifi module is being configured please wait a moment... (Cancel)"
But NOTHING happens after waiting for a long.
I have a Elegoo Neptune 2 with a 1.0.2 Board and "Marlin -bigfix2.0.x-MKS-2.1.3" on it.
Please help me!
the same happens to me :c
can i use it with 12864 lcd display?
Can't use
Can I use this with MKS SGEN_L V2.0? There is a port on SGEN_L v2.0, but I want to use it with the MKS H43 touch screen. Is there any tutorial to do that? Thanks in advance.
Link in video is not working. Error 404
You can follow our makerbase facebook, I have posted it to our facebook page too
И где ссылка на магазин мля?
pt.aliexpress.com/item/32816510985.html?spm=a2g0o.store_pc_allProduct.8148356.5.689823b41Yj0os
你也看一拳超人