MERCEDES SPRINTER 313 MANUAL GEARBOX OIL CHANGE / WYMIANA OLEJU W MANUALNEJ SKRZYNI BIEGOW

Поделиться
HTML-код
  • Опубликовано: 5 фев 2025
  • MERCEDES SPRINTER 313 MANUAL GEARBOX OIL CHANGE / WYMIANA OLEJU W MANUALNEJ SKRZYNI BIEGOW
    OIL MB OEM 75W85 2L
  • Авто/МотоАвто/Мото

Комментарии • 26

  • @poorboymechanic5280
    @poorboymechanic5280 3 года назад +5

    Thanks very much for taking the time to shoot this video. I am going to do this job today. This is exactly what I needed to know. Very much appreciated sir.

    • @mattbelka1
      @mattbelka1  3 года назад

      No problem mate I hope that will help you.

  • @extremesports5345
    @extremesports5345 3 года назад +6

    Hi
    i was surprised that it only takes 1.9ltr of oil. I was under the impression you just fill up the gearbox till it strats to flow out of the level plug and once not flowing out close it up and job done.

    • @ivandecloedt1484
      @ivandecloedt1484 2 года назад +1

      thats the correct way to do it like you said

  • @patrickenright6094
    @patrickenright6094 5 месяцев назад

    V good video thank you.

  • @David-qe6wq
    @David-qe6wq 3 месяца назад

    Great video what is the recommended mileage to do it on?

  • @C3-Fritz
    @C3-Fritz 2 года назад

    the amount if metal filings is ok? Seems for me the upper limit of wear ... What is your experienence?

    • @mattbelka1
      @mattbelka1  2 года назад +1

      Van is still on the road and gearbox work fine with 330k miles on.

  • @egzonarifi5598
    @egzonarifi5598 10 месяцев назад +1

    Wich Oil do you use ? 75w 90 ? Thank you

    • @mattbelka1
      @mattbelka1  10 месяцев назад

      Oem mercedes, they won't tell me the spec ...

    • @Moroccandriver007
      @Moroccandriver007 3 месяца назад +1

      What's the point of your video if you don't want to tell us your oil type😢😢​@@mattbelka1

    • @mattbelka1
      @mattbelka1  3 месяца назад

      @@Moroccandriver007What the problem.. you simply call mercedes and ask.

  • @redpig1120
    @redpig1120 2 года назад

    Nice video…what year is the Sprinter,.,mines a 00..would it be the same setup

  • @robertbickerstaff2538
    @robertbickerstaff2538 Месяц назад

    Was van level or on front wheel ramps ?

    • @mattbelka1
      @mattbelka1  Месяц назад +1

      @robertbickerstaff2538 you must do it on a flat level surface. Or lift it up level

  • @DrDubstyle
    @DrDubstyle 2 года назад

    It should be the same on a crafter i imagine? Same size hex bits

  • @magnusremovals3548
    @magnusremovals3548 3 года назад

    I was surprised there is no washer on drain plug.

    • @mattbelka1
      @mattbelka1  3 года назад

      No washer lil bit of sealant.

    • @magnusremovals3548
      @magnusremovals3548 3 года назад

      @@mattbelka1 Ok, what kind of sealant do you use? I will be doing mine later today.

    • @mattbelka1
      @mattbelka1  3 года назад

      @@magnusremovals3548 high temp and oil resistance sealant you will get it from any motors factory's shop.

    • @magnusremovals3548
      @magnusremovals3548 3 года назад

      @@mattbelka1 Thanks.

    • @mike1043
      @mike1043 19 дней назад

      @@mattbelka1Did you use RTV silicone seal on the oil plug?

  • @GoaUld-j6i
    @GoaUld-j6i Год назад +3

    Moment obrotowy Nm ? Z wyczuciem rozwalić gwint, ha ha ha