Thanks , yeah that's something we actually forgot to do with this one and I meant to do that when he brought it over to do the exhaust and forgot then too . Thanks for watching!
Yeah kyle said you had mentioned that , we were going to a few weeks ago when he replaced the exhaust but he decided to crank the front up about half an inch just to cut out the rubbing he was getting every once in a while. Thanks for watching bro!
www.napaonline.com/en/p/BK_7302411 Here's the link to them but if that doesn't work they are from Napa they are balkamp 730-2411 for the center caps . The trim rings are from wheel vintiques they are the 15" hot rod smooth trim rings sku # 3005-15-1 hope that helps. And thanks for watching!
@mannypacheco3554 the ones I got using that part# were flat tops but I do see online it shows the dome ones but the 3 I originally had from back in 06 using that number and had to pick up a 4th one for this xb and used the same part # and got a 4th flat top cap
@omega5fisher www.napaonline.com/en/p/BK_7302411 Here's the link to them but if that doesn't work they are from Napa they are balkamp 730-2411 for the center caps . The trim rings are from wheel vintiques they are the 15" hot rod smooth trim rings sku # 3005-15-1 hope that helps. And thanks for watching! Sorry just copy and pasted the info on the caps and trim rings from another comment. Hope that info helps. And thanks for watching. Also the center caps are unfortunately not chrome they are just zink plated trailer hub bearing caps
Did you have to take the top of the shock out on the rear to drop the axle? I was just wondering because I am looking at lowering my Scion. I thought I just had to undo the bottom side.
@johnpaulheupel5713 thanks ! To just lower it with drop springs all you need to do is remove the lower shock bolt to drop the axle . But with the coilovers it replaced the shock so we did that too . Thanks for watching!
Help from anyone please? I have a cosmetically beat up 05 XB… would it be cheaper to buy one that looks nice or to get a couple of small dents fixed, spoiler, door lock actuators, windows get stuck, new wheels, and a paint job on my current one? Ones in good condition (much nicer looking than mine) and a few more miles can be found around me in the $5k+ range. I obviously know nothing about fixing up cars
That's a tough call honestly , really if you have one that's in great mechanical condition and lower miles it might be worth getting it cosmetically fixed up but paint and body can definitely be expensive. Maybe get a few quotes from some local shops to see what all the repairs on yours might cost ya and then do the math to see which is the better route to take . Sorry probably not the answer you we're looking for but good luck
My front windows also used to get stuck, I found replacements on Amazon and fixed them within an hour after some RUclips vids! The door lock actuators all have to be replaced so you’re not taking each one out to figure out which one is causing the issue, cause if ones out, they’ll all go out so might as well! I did that while I was fixing the window actuator too since the panels were off, that took maybe an hour and a half but only cause I decided to do all this at the end of a Bay Area summer 😂 Super easy tho and I don’t consider myself a fixer upper of cars but I sure can fix this car! RUclips is your friend!
@@PreSwoleBobby thanks… I’m considering trying it myself now.. I kind of like how my XB looks beat up because no one looks at it twice but having those things fixed would make drivability better.
@@wakawaka1976 also check if there’s any pick’n’pulls near you! Salvage yards have been a huge help! My rear bumper was seriously messed up and I found one that was the same color, minor scratches but not as bad of a crack like my previous one had! The sites let you search for the specific year, just a note 2004-2006 share the same body so parts are the same!
www.napaonline.com/en/p/BK_7302411 Here's the link to them but if that doesn't work they are from Napa they are balkamp 730-2411 for the center caps . The trim rings are from wheel vintiques they are the 15" hot rod smooth trim rings sku # 3005-15-1 hope that helps. And thanks for watching!
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
You guys did a beautiful job! Those trim rings finished it out nicely ❤️
@@vwave7292 thanks I appreciate it ! And thanks for watching!
Wheels look much better now !
dont forget preload on rear arm bushings and shocks !! nice car, love it !
Thanks , yeah that's something we actually forgot to do with this one and I meant to do that when he brought it over to do the exhaust and forgot then too . Thanks for watching!
Super nice little project!
Thanks, yeah it was a quick ,easy and relatively cheap way to get it looking a little better. Thanks for watching!
i've been thinking about doing this to my stock steelies too, and now i'm definitely doing it! Looks dope!
@@Shun-the-Sun thanks, and thanks for watching!
take out the adjusters in the rear and just run the spring. it will sit level with the front all thecway down, =Sunset=
Yeah kyle said you had mentioned that , we were going to a few weeks ago when he replaced the exhaust but he decided to crank the front up about half an inch just to cut out the rubbing he was getting every once in a while. Thanks for watching bro!
Ok so where did you find the rings and dust caps? Have any part numbers or sizes you can share?
www.napaonline.com/en/p/BK_7302411
Here's the link to them but if that doesn't work they are from Napa they are balkamp 730-2411 for the center caps . The trim rings are from wheel vintiques they are the 15" hot rod smooth trim rings sku # 3005-15-1 hope that helps. And thanks for watching!
100%
Were yours flat tops or round tops because it shows in their web site as round tops🙏🏼
@mannypacheco3554 the ones I got using that part# were flat tops but I do see online it shows the dome ones but the 3 I originally had from back in 06 using that number and had to pick up a 4th one for this xb and used the same part # and got a 4th flat top cap
What is the size for the chrome caps for the centers of the steelies???
@omega5fisher
www.napaonline.com/en/p/BK_7302411
Here's the link to them but if that doesn't work they are from Napa they are balkamp 730-2411 for the center caps . The trim rings are from wheel vintiques they are the 15" hot rod smooth trim rings sku # 3005-15-1 hope that helps. And thanks for watching!
Sorry just copy and pasted the info on the caps and trim rings from another comment. Hope that info helps. And thanks for watching. Also the center caps are unfortunately not chrome they are just zink plated trailer hub bearing caps
Did you have to take the top of the shock out on the rear to drop the axle? I was just wondering because I am looking at lowering my Scion. I thought I just had to undo the bottom side.
Great work! It looks so much better!
@johnpaulheupel5713 thanks ! To just lower it with drop springs all you need to do is remove the lower shock bolt to drop the axle . But with the coilovers it replaced the shock so we did that too . Thanks for watching!
Thanks!@@kenschopshop
What are the steels off ? And what size are they looks great
They are just the stock 15" steel wheels . Thanks and thanks for watching!
@@kenschopshop looks great I've a gen 1 too great cars
@@Nizzwell thanks, yeah they are great little cars!
What size wheels?? Please sir??
@jeantaylor6785 they are the stock wheels with the hubcaps removed. I believe the oem wheels are 15x6 with I think a 185 60 15 tire
Loved it!! Great video. New sub
Thanks I appreciate that!
Help from anyone please? I have a cosmetically beat up 05 XB… would it be cheaper to buy one that looks nice or to get a couple of small dents fixed, spoiler, door lock actuators, windows get stuck, new wheels, and a paint job on my current one? Ones in good condition (much nicer looking than mine) and a few more miles can be found around me in the $5k+ range. I obviously know nothing about fixing up cars
That's a tough call honestly , really if you have one that's in great mechanical condition and lower miles it might be worth getting it cosmetically fixed up but paint and body can definitely be expensive. Maybe get a few quotes from some local shops to see what all the repairs on yours might cost ya and then do the math to see which is the better route to take . Sorry probably not the answer you we're looking for but good luck
My front windows also used to get stuck, I found replacements on Amazon and fixed them within an hour after some RUclips vids! The door lock actuators all have to be replaced so you’re not taking each one out to figure out which one is causing the issue, cause if ones out, they’ll all go out so might as well! I did that while I was fixing the window actuator too since the panels were off, that took maybe an hour and a half but only cause I decided to do all this at the end of a Bay Area summer 😂 Super easy tho and I don’t consider myself a fixer upper of cars but I sure can fix this car! RUclips is your friend!
@@PreSwoleBobby thanks… I’m considering trying it myself now.. I kind of like how my XB looks beat up because no one looks at it twice but having those things fixed would make drivability better.
@@wakawaka1976 also check if there’s any pick’n’pulls near you! Salvage yards have been a huge help! My rear bumper was seriously messed up and I found one that was the same color, minor scratches but not as bad of a crack like my previous one had! The sites let you search for the specific year, just a note 2004-2006 share the same body so parts are the same!
I see another Virginia tagged xb. What’s up Virginia 🤙🏼
Thanks for watching!
Can you tell me what size those center caps Are?
www.napaonline.com/en/p/BK_7302411
Here's the link to them but if that doesn't work they are from Napa they are balkamp 730-2411 for the center caps . The trim rings are from wheel vintiques they are the 15" hot rod smooth trim rings sku # 3005-15-1 hope that helps. And thanks for watching!