SIMPLE method. Three dimensional drawing on metal. A great idea for any axe
HTML-код
- Опубликовано: 6 июн 2024
- Hello!!! In this video I tried to make a three-dimensional drawing on metal. I drew a picture on the new axe. The method is simple, and the result, it seemed to me, was incredibly good. How do you like it?
Hi all. This time I want to create a three-dimensional design on a new ax in the style of the Warhammer 40,000 universe, namely the Hound of Khorne. Thanks to patience and perseverance, using simple technology, sitting at home, I created a 3D drawing on metal. The complex pattern on the steel gives the ax exclusivity. For me this is an incredible result, which I am very pleased with. How do you like my work?
For this project used a new ax purchased from an online store. The ax turned out to be reliable, but I didn’t like its shape. What have I done? They cut off the unnecessary metal and gave the ax the shape I needed, with a slightly curved cutting edge. Cleaned and sanded. After the blank was prepared, I decided to apply a Warhammer 40,000 Hound of Khorne style image to it. After multilayer electrochemical etching, I began to get the effect of a three-dimensional pattern on the metal. When the drawing was ready, I blackened the product with a special product for black steel. Hand grinding and polishing. I was pleased with the result of this work and I hope you liked it too.
Dear friends, if you decide to repeat what you saw. Don't forget to follow safety precautions. Gloves, mask, glasses, etc. And what you see is just a flight of creative imagination, and not instructions on how to do it. Thanks for understanding!
TO SUPPORT THE AUTHOR: If you have the opportunity to support me!!!
Donat - www.donationalerts.com/r/miha...
With your support you help this channel develop!
Thank you...
#howtodraw #engraving #drawing #metaletching #howtomake Хобби
Hi all. This time I want to create a three-dimensional design on a new ax in the style of the Warhammer 40,000 universe, namely the Hound of Khorne. Thanks to patience and perseverance, using simple technology, sitting at home, I created a 3D drawing on metal. The complex pattern on the steel gives the ax exclusivity. For me this is an incredible result, which I am very pleased with. How do you like my work? Friends! Rate my work 👍👎 in the comments. Your opinion is very important to me. Thank you
TO SUPPORT THE AUTHOR:
If you have the opportunity to support me!!!
Donat - www.donationalerts.com/r/mihailkupec
With your support you help this channel develop!
Thank you...
Всем привет. В этот раз я хочу на новом топоре создать объёмный рисунок в стиле вселенной Warhammer 40,000, а именно Гончая Кхорна. Благодаря терпению и усидчивости, используя простую технологию, сидя дома, я создал 3D рисунок на металле. Сложный рисунок на стали придает топору эксклюзивности. Для меня это невероятный результат, которым я очень доволен. Как вам моя работа?
Друзья! Оцените мою работу 👍👎 в комментариях. Ваше мнение очень важно для меня. Спасибо
А что за паста черная?
Making something fo Khorne when you are doing the very thing Slaanesh would like. What kind of heretic are you?
Do you sell pieces like this?
@@Photos_by_Cowz I sell some of my works. In Russia
Amazing work. From USA
I agree with the comment that it isn’t “SIMPLE” but still, you’re an expert craftsman (to detail).
🤝🤝🤝
Cool !! You put a tattoo on an ax . I worked in a machine shop for years and years so I appreciate the skill. Great job!
👍🤝🤝🤝
Blood for the blood god, skulls for the skull throne
✊🤝
Worthy of Khorne
@@GHOSTSTALKER90 🙂✊🤝
Wonderful craftsmanship! Stunning result!
🤝
Mihail jak zawsze świetny pomysł i fantastyczne wykonanie!
Dziękuję... 🤝🤝🤝
Thats incredible. I would never use that axe though, id mount it over my fireplace and gaze at it in the flickering firelight late into the night.
🙂👍🤝
As long as you were cutging something soft, you would be fine.
Letteralmente Fantastico !!!
Complimenti !!!
🤝🤝🤝
By far the best looking axe I've seen, definitely not a simple process.
🤝
Salt dissolved in water until saturation like he is using works well but gives off harmful fumes. Try using vinegar instead, but always use proper ventilation no matter what you use.
You are right! Safety precautions are very important... 🤝🤝🤝
Был нормальный, рабочий топор, а теперь его куда? Хотя красиво, МАСТЕР.
У меня часто на подарок берут, а там уже, кто как использует...) Спасибо!
Шедеврально... Одним словом:) полный эксклюзив
🙂🤝
You are much too humble. That should be in a museum!
🤝
What a beautiful piece of artwork
🤝
Fantastico!!!👍👍👍💪💪💪
🤝
Your drawing and etching skill are amazing! Lots of folks can talk trash but they themselves can’t even hold a candle to you. Keep up the great work, you’ve got the fan out there
Thanks for the kind word... 🤝🤝🤝
Awesome work! Great talent!
🤝🤝🤝
Thank you for using a grinding guard on your grinder. I see many videos where people don't use them, and without a guard, a grinder is very dangerous.
🤝
Безупречно Красиво !!!👍🤟💯
Спасибо! 🤝
Bravo, magnifique travail je suis admiratif
🤝
Stunning work. ❤
🤝
Beautiful work! ❤
🤝
Прекрасная работа!
Спасибо... 🤝
Beautiful, Mihail.
🤝
This looks incredible 👍👍
🤝🤝🤝
That is gorgeous my guy.
🤝🤝🤝
Amazing work
Very well done
🤝
UR NEXT LEVEL! WOW!
🤝
Sincèrement magnifique un vrai travail d'artiste 💯💯
🤝🤝🤝
Awesome work! So cool
Thank you... 🤝
Excellent work.
🤝
Hey that came out very nice job well done
🤝🤝🤝
Wow that’s amazing
🤝
Very very cool, rad artwork
🤝
Beautiful work
🤝
You've got great skills, these highly detailed dragon kicks ass.
Wished i could create such nice Weapons or at least one axe like these. 😂👍🏻
🤝🤝🤝
Great work my friend 👌🏾
🙂🤝🤝🤝
Beautiful work man!😊
🤝
This might be the most complicated "easy" method for anything I have seen in a while - by a long shot. Still, great result and awesome craftmanship!
🙂🤝🤝🤝
Шикарно сделано, на своем канале когда-то тоже таким увлекался, но потом хобби поменялось)) Очень крутая работа, браво👍👍👍
👍🤝
When I got into axe throwing I modified my axes by re shaping their profile making one look medieval and another Viking. I used a hacksaw blade that has a diamond line so you can make very fine detailed cuts. I have also made new wood handles for them . Have not etched them since I can not decide on a pattern or image to put on .
👍🤝
Когда мне было 6 лет, во дворе моей бабушки жил преподователь высшего военного училища воздушно десантных войск, так он метал все что метается от топора до отвертки, при этом форма инстркмента значения не имела
Lo encuentro maravilloso. Me encantaría tener esa obra tuya en mi casa.
Gracias por compartir.
🤝🤝🤝
@@MihailKupec Tienes un don artístico en herrería que debes aprovechar incursionando en katanas y/o cuchillos antiguos
Es maravilloso lo que haces.
Felicitaciones desde Chile.
Damnn that's a Lotta frikin work. Well worth it, though. It beautiful.
🤝
Very nice!
🤝
Very NICE 👍
🤝
Would love to go into battle with this fantastic workmanship 👍
🙂👍🤝
Holy Shite! Pretty damn good to me!
🤝🤝🤝
Кхарн одобряет, шедевральная работа.
🙂🤝
Very nice.
🤝
Super impressive! I can only guess how many hours of dedication it took to be as good as this..
Thank you. You are right. A lot of time and not the end point yet...) 🤝
Man that wasn’t simple! Amazing work
🤝🤝🤝
Мастер своего дела. Великолепно👍
🤝🤝🤝
Есть хороший состав для травления стали - медный купорос + соль... правильный цвет раствора - насыщенный изумрудный. Это если не хочется связываться с проводами :)
Можно попробовать... Спасибо 🤝
А чем закрывать те части рисунка, которые травить не надо?
@@user-cr1ie3iz8c Краской, можно из баллончика, а можно заморочиться специальным составом для литографии... главное чтобы поверхность металла была шершавой, для этого автор её сначала и травит. К полированной краска нормально не пристанет.
@@MihailKupec в процессе травления будет появляться медная плёнка, её нужно удалять кисточкой или зубной щёткой.
@@urakurt_spkb краска - эмаль?
Bravo
🤝
Me gustaría saber la lista de todos los materiales que usaste, los insumos. Gracias, abrazo. Maravilloso trabajo
NICE WORK
🤝
Nice work 🤔👍
🤝
Шикардос! У меня нет такого восприятия в 3D, поэтому такое не пытаюсь вытравить. Да и деталь не топор, а монетка
🤝🤝🤝
Nice!
🤝
Очень круто 🤩👍👍👍
🤝
Sono 5/6 anni che ho imparato a fare asce , ne ho fatte almeno 50 , complimenti a te e saluti dall'Italia.
👍🤝👍🤝👍🤝
Oh yea i can make that no problem. Lemme get my frying pan and some chop sticks and ill be done a few minutes. Looks fantastic!
🙂🤝
Сам этим занимаюсь и знаю на м сколько это трудоёмкий и кропотливый труд. Красава. Аплодирую стоя. Лежит кованый ржавый топор с клеймом 1974 года. Все никак руки не доходят. Видимо после вашего видео все же соберусь с силами и отреставрирую
🤝🤝🤝
Красота 👍🏼
🤝
👏🏻👏🏻👏🏻
🤝
I am going to be foing this. This is a lot easier than learning engraving 😂
Amazing skill. Not sure I agree with simple though. Came out great.
🤝
que maravilla
🤝
Огонь 👍👍👍
🤝🤝🤝
Очень круто.
🤝🤝🤝
Такой топор жалко использовать по назначению.
Красивая работа!
Спасибо... 🤝
Великолепно!!!! Браво!!!
🤝🤝🤝
Bad ass
Absolutely beautiful.
What's somethin like that cost?
Thank you🤝🤝🤝. I sell my works in Russia.
Результат Отличный!!
Плохо то что далеко не все реактивы расписаны
👍
🤝
How much do these sell for? If it's under 1000 bucks then I'd be surprised. Amazing craftsmanship
🤝🤝🤝 Thank you
Прикольно ❤
🤝
Круто
🤝🤝🤝
Классный топор! Интересно сколько будет стоить!? В подарок для папы, что нибудь такое хочется взять. 😊
Спасибо. avito.ru/brands/224b9f51aaa1a29adae828929aee39d8 - тут можете посмотреть цену, там сейчас одна работа в продаже стоит...
Красота неимоверная, можно ли такой топор заказать?
Спасибо, на заказ не беру работу, продаю то, что делаю. Через неделю будет готов топор такой же по размеру и формы, рисунок будет с драконами, буду продавать на авито. Могу как выставлю на продажу скинуть ссылку.
Was daran jetzt einfach sein soll, verstehe ich nicht 😉, aber das Resultat sieht unglaublich super aus!
🤝🤝🤝
What is this white spray at 2:30. Plain spray paint?
spray primer
Simple method?
Simple method, complex design.
After spending 4 hours reshaping the head to begin with! 😬
Simple for him.
😅😂
The complex method starts in an iron mine.
Да ты супер!😊 Но топор испортил, теперь только смотреть и восхищаться❤
🤝
Very interesting skillset. Did you go to school or are you self taught?
Thank you...Self taught
Ouch man, scribed some awesome graphics...
🤝
How much it is cost?
Снимаю шляпу!
🤝
Неужели кто то работает потом таким топором, будет же жалко. Вывод если делать самому такой,то интересно, а покупать дорого и бессмысленно,будет лежать. Но красиво!❤
У меня берут на подарок часто. А там... Кто знает, кто на что горазд..) Спасибо 🤝
Bonjour, qu'est-ce que vous mettez au pinceau a la 6:00 minute?
Merci
De l'eau salée 🤝
Super merci ! Bonne continuation pour vos travaux 🔥
@@valentindelphin4186, 🤝
Khorne axe
🙂🤝
Что за чёрная краска из тюбика?
Blood for the blood god skulls for the skull throne
✊🤝
Where was the simple part? Nice work!
The technique itself is simple, but you need experience..) Thank you 🤝
Вопрос такой к мастеру,что за калька/пленка для перевода используется,где купить,как называется?
Я пытался такую найти, но встречал только бумажную. Есть еще один такой мастер и он показал как сделать самому такую кальку. Не знаю, как Вам тут скинуть видео.
Такую новодельную я тоже не нашел, не много самому подарили. А по ссылке я даже не знал, что нельзя оставлять... Да Вы напишете поисковый запрос, по которому видео выскакивает, кому надо найдёт, да и самому интересно...)
@@MihailKupec ruclips.net/video/g-I2xo0xP8w/видео.htmlfeature=shared
@@MihailKupec не могу найти,по запросу мутная приходит или бумажная
ruclips.net/video/g-I2xo0xP8w/видео.htmlfeature=shared
So what's the not simple method?
А что с другой стороны топора???
Так в конце видео я показывал... 🤝
Can I buy one from you?
I sell some works, but so far only in the country where I live. Sincerely from Russia
We should come up with a word for a 3D drawing.... I say we call at "carving" or maybe "sculpting" Think about it...
🤝🤝🤝
I think you mean engraving 🤔
@@aaftiyoDkcdicurak Good idea. Let's use that one.