Mechanic Gadgets Zip Tie And Multimeter Holder
HTML-код
- Опубликовано: 11 июн 2024
- Today we look at the DMTT zip tie organizer. Is it better than my previous method of organizing tip ties? Some would argue it’s about the same. We also have a look at the KingSung case and magnetic mount for my Klein multimeter. This I can say is better than my previous method.
As an Amazon Associate, I earn from qualifying purchases
Hard Caser Bundle with Magnetic Hanger Strap Replacement for Klein Tools MM400/MM300/MM200/ET140/MM720 Digital Multimeter by KingSung
amzn.to/3x1RdHz
DMTT Zip Tie Organizer Holders
amzn.to/3yWI9UO 
Развлечения
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
A rubber band wrapped a few times around the bundle of zip ties works like a champ and is auto adjusting too, and not bulky.
Hair ties from the dollar store is what I use
@@mitchchartrand Brilliant. That may be an upgrade to my method. Dollar Tree will see me today. Thanks
@@mitchchartrandYou beat me to it! Yes, little rubber hair ties, or "elastics", are the perfect way to bundle your zip ties. They are incredibly cheap, and just the right size for bundling all kinds of small items. I use one near the bottom and another near the top of the zip ties. Bonus: Put a key ring on the top one and put the key ring on a carabineer. Clip them to a belt loop, your tool bag or whatever.
You have me searching for a case like the one you presented. I am a gizmo kind of guy, being a master electrician for 44 years. Thank you sir.
Amazon has all kind of nice cases like that. I've got my multi tester in one, and I've got some of my saws and cordless drills in them.
Love the bloopers at the end. Those in combination with the gadget review gives me Technology Connections vibes
"Hey, I might be able to use those vibe", has got me a basement full of somewhat useful things. Then there is the cobweb corner, it is larger than I'd like to admit. Always enjoy your videos, your sense of humor is spot on. Thanks again
You got to have a 5 year rule. If you haven’t touched it in 5 years throw it away or give it to someone 😁👍🏻
Just a suggestion from one tech to another….the small Milwaukee cloth bags that some of their 12v tools come in…..make a nice little zip up storage solution. I keep my multimeter , IR gun and other various multimeter leads in that bag. It just works…for me anyway. Love ur vids and ur short vids….gives me a good laugh while working on haunted swing reaches.
used to watch every short of yours for multiple times and then YT decided not to show me your channel for over a year
now I got ur vids back and love to see that you look fresh and healthy!
wish you the very best
he washes his face before doing videos, so he is "fresh" LOL
RUclips does that sometimes. I think they’re trying to make room for all the TikTok people migrating over.
That's too funny. I bought the same case for my Klein meter and I think it is awesome (especially for the price). Keep up the great work!
The rubber boot on my ancient Fluke 23III has a slot that magnetic holder strap gizmo would fit in. I have some spare nylon strap and some magnets laying around- I think I’ll make my own. I admit that I wish I’d thought of it first.
The case itself looks pretty spiffy but it could use an external pocket for extra leads and connectors like you’ve got. I’m one of those guys who tries to keep all the pieces of a thing in one place. I’ve been thinking about finding a case for mine since apparently Fluke doesn’t provide them and you’ve inspired me to beak down and actually do it.
I use my own straps for a lot of things. My tool belt doesn't usually have tools on it 😅 it's just a work belt with a magnet glued to the buckle and various clips. Some military style, some homemade.
The magnet is for small parts, but it can hold some tools. I've considered adding more magnets to the belt instead of adding pouches. I like the idea of a magnet on a strap. That allows for more mobility without accidently knocking tools off the magnets.
@@brookelord3448 Commercial work belts have always disappointed me. TL;DR: I found a Sam Browne belt and have a bunch of pouches that I swap out depending on what I’m doing. A decent surplus store will have pouches and bags and stuff that you can customize for tools but you can also grab the clips that fit the belt and attach them to commercial cases like the one in this video.
“Military grade” usually means “lowest bidder garbage” but in my experience Sam Browne belts and web gear in general are pretty rugged and comfy if you fit them right.
Zip tie holders are a bit bulky. I thought it was hilarious that they zip tied their zip ties together. Thanks for the review.
I give you a one out of ten for trying but then you showed your ziptie method is better so minus one point zero out of ten thank you for playing
I like how they're bulky enough that you have to hang it off your tool bag while you walk. Tap...tap. tap...tap. with every step
Is that sarcasm or do you actually like the tapping?
Works for me. I don’t hear that tapping, I know something is missing.
That’s so they can hear me coming 😁
I've always just used a rubber band around my zip ties...does fine and then I also have an elastic that I could potentially use in a pinch for whatever.
That magnet and case is excellent! I have the same multimeter, and I will be picking up one of them
Nice job. I kinda like the zip tie holders. Gonna order it.
Awesome! I use the zip tie the zip ties method too.
Zip ties make great zip tie holders :) also I use one of those cases for my laser pointer thermometer
4:35 I use a Klein multi-meter case to hold my carving tools. Sloyd knives etc. Works great
Always enjoy these tool reviews. . Thank you
Glad you like the magnet, it will fit on a bunch of other tools of theirs also.
I’ve used quite a few times since recording this. It’s really handy 👍🏻
The holders are probably glow in the dark for when they’re sitting on the floor with you under a machine so you can easily find them, or for finding in your bag maybe
The "Glow in The Dark", doesn't last long. But honestly, I've been using it for over 3 years and if you put it in the same place every time, it's not hard to pull a zip tie without even looking.
I got the case nearly identical from Khanka i believe. I keep my alligator clip leads, K type thermocouple, and outlet tester in the front zipper part. Multimeter in the bottom. Works perfect for my MM400.
Mocked the cable tie holder at first, then remembered the times dropping the bundle of cable ties when working on a ladder, aloft etc ....... best feature the carabiner to clip it to your belt or ladder etc
The number of times I have seen cool products as an ad on insta but looked them up on amazon since they look to be made like crap is immense.
I've come to the realization that literally anything product wise or service related that gets blasted out on social media is one of two things. A complete and utter scam, or junk.
My zips are always nice and organized at my home... in the bottom of every drawer in the home.... and the garage 😅
"I noticed the zip ties they sent with the holders were held together using the old method..."
That's like putting a coupon for ground beef in a box of veggie burgers.😂
😂😂
I have that zip tie holder.
Today a coworker asked me if it's how i castrated myself.
Just a short story.
The holder is bulky but works well just my 2 cents.
😂😂
Keep it up man
So that's what those things are for. Handy wire tie wrangler.
As a LVC Tech the Zip Tie Holder is handy on my hip; carbiner + belt loop.
once a year I work at a Punk festival for free entry and free drinks. Those zip tie holders could come in handy there. I go threw ten bags in a week then. I kind of like that work, because you have to keep your essential tools on your body all the time, because you're walking around all day. Makes you creative and efficient. I'm really looking for a holster for a two pole voltage tester that takes care of the cable. (no idea what its in english)
As someone who has to carry a crap load of zip ties on their person while walking in the dark, I could use this. It almost seems like it was made specifically for my job.
“Zip Ties In The Dark” sounds like a Lifetime movie my wife would watch 😜
Finally a glow-in-the-dark solution for home invaders stumbling around in the dark for zip ties
Haha I can’t come up with a reason for them to glow in the dark 😜🤷🏻♂️
Fluke makes silicone leades with removable ends that ypu can use different attachments. Expensive but silicone leads are amazing especially when u can get rid of all those other leads.
Quality content as always. 👍🏼👍🏼👍🏼
For the guy with a thousand zip ties, but no zip ties
I like the Klein amp meter, which reads AC and DC amp draw and is also a decent voltage meter. I also bought the magnet attachment. Very happy with it.
The snap on lead kit is nice and it has a roll you put everything in. Spendy sure if you do this for a living worth it, if not I'd pass.
I have3 zip tie holders with belt loop form rack a tiers and let me tell you when you wiering in a panel its absolutly awesome like you just have 3 of em eatch for a different size/color.
We sell that multimeter case at the big blue box store. I was wrong. We don’t have that brand. We have popular named one.
Yeah the Fluke brand soft cases suck too, I picked up one of the chinesium semi hard cases for my Fluke. Its a lot nicer, only problem is my 87v no longer fits in the case with the magnet hanger.
The problem with Fluke cases is that they are made to be too generic. They try to make their cases so that they can be used with multiple models of meters, but they don't don't fit any one meter and accessories particularly well. I bought a new Fluke 1587 FC-NIST several months ago (~$1200) and it didn't come with a case. The case that Fluke recommended for it is just a zippered bag. It's a joke.
@@highpwr Yes. That was the same story with my 87v if I recall correctly. No oem case.
Zap it with a UV flashlight for 10 seconds or so and then turn out the lights? Also, check the fur of all your pets, denim jeans, and bugs in your back yard to see if they glow under UV. (They will stop glowing without the UV)
If you cut a little slit in the middle of the zip tie bag they don't fall out and you can just stick a finger in the slit and pull out what you need.
Why does anyone need a ziptie holder? That's what the apprentice us for 😂
Zip ties : I just cut a finger size slit in the package about ⅞ of the way up & just BEND one out as i need it. They can't fall out this way.
I'm kind of annoyed my $500.00 fluke didn't come with anything resembling a case.
Fluke started designing laboratory instruments that would never be used in dirty, non air conditioned environments much less have to rough it in a tool bag with other tools. They proved so damn useful and reliable that people who get their hands dirty started buying them.
I think Fluke just hasn’t figured that out yet.
On the other hand, if they did provide or sell cases it would jack up the price by like fifty bucks or more and the case probably wouldn’t provide any better protection than the one reviewed.
For 5 bills it should come with something.
@FunkFPV well, it did do the job i needed it to do.
Try out putting nuts on a string loop using a spoke. Don't know why they don't sell them like that
Neat.
I liked the rack-a-tiers belt clip zip tie holder but they discontinued it. I havent found anything was just as good.
Looks to me like if you put both sets of leads in the case you could nestle that little box of accessories next to the multi-meter. Inside it wouldn't be likely to be lost and when you open the case ... There they are.
3:45.. pull them all the way down..☝️
What are these "instructions" you speak of???
My problems with the zip title holde are the saiz of the holder
Glad he’s making affiliate money off his popularity. All the more money to this dude is a good thing as far as I’m tracking
Amazon don’t pay 💩 LoL But it’s better than nothing or sending people there for free.
I do pretty well from RUclips off my Shorts. That’s good enough 😎👍🏻
@@FunkFPV Good sir. I’m glad you’re getting paid. 👍🇺🇸 Thanks for putting out all the informative content. I’m sure you’ve saved me from a few future stupid mistakes. 😊
Look up Probe Master test leads. Those look so painful to use.
Been looking for a case like that to hold the larger IR Thermometer they make. Is there enough room in that to hold something that is 7” x 4.5” x 2”?
I guess Klein’s cases have gone downhill. My meter came with an awesome case.
The only ones I saw were cheap soft bags.
Have you tried the Cline leads? Better than the fluke and comes with gator clips.
I’ll have a look at them 👍🏻
You don't need to do the static screen and the colored screen between each outtake
I know 👍🏻
A 100 zip tie bag is actually 98 zip ties and 2 zip tie holders
Haha
Put the plastic container in pouch first i bet it works
3:07 Your method is better
Glue some magnets to the case, and you don't need to take it out of the case to use it, just hang it off the machine.
really enjoy your videos funny as f@ck
I'll stick with your ziptie method, that thing is a solution looking for a problem.
Are we sure those are for zip ties? X rated purposes come to mind.
They are glow in the dark 🤔
Why do you insist on keeping the holder in the middle? Try up toward the " head " and see if it is not better.
I was litterally just looking at getting those ziptie holders and you just so happen to review them. very weird.
Words... 🤣
I think cops like the zip tie holders for there extra large zip tie handcuffs…
…don’t ask…
I use this cool self-tensioning device for my zip ties it was engineered by British inventor and next year will be 180 year old it's called a rubber band
WTF..... I swear an hour ago I was thinking about a way to organize my zipties. I NEVER said anything out loud. And here is RUclips showing me what I was thinking about.
5:04 they really missed the mark with not calling it the KingSugg
Klein?….. use Fluke, like a real professional
Fluke comes with the strap magnet hook and case for the price it better.
Yo tree jumper. What say you now?!
I seen you personally trying to tree jump. Just saying maybe I need to let your job know how much you like you jump tree and male etx