💦 Does KOTKING work? Yes, BUT. . . | KotKing FPV Drone & RC Waterproof Coating Review
HTML-код
- Опубликовано: 14 сен 2021
- 😩 FRUSTRATED? Confused? Get HELP! Book a 1-on-1 coaching session with me! ownnit.com/o/RCwithAdam
YOU CAN SUPPORT ME:
💪 Become a WINGMAN: Get a good feeling in your heart and access to 3D printable designs, and more! www.rcwithadam.com/membership
OR
👌 KO-FI: ko-fi.com/rcwithadam
OR
👍 PATREON: / rcwithadam
Thanks!
🧠 FREE courses and more for FPV Drones, RC Aircraft & 3D Printing at rcwithadam.com/
Does KOTKING work? Yes, but there are also several downsides. Let's review the pros and cons of KOTKING and my experience with testing it in saltwater. I'm going to try conformal coating before I use KOTKING on any of my FPV quads.
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam 
Наука
This is an eye opener.
All the videos I've seen till now on social media praise this like it's a revolutionary product. Your unbiased and real review with the whole application process and testing is very useful.
This can be used by both someone looking for a review and someone who already owns it and wants to know how to use it.
Very nice.
I love the silicone conformal coat, I haven’t had any issues.
I will say that a black light or UV light will light up the conformal coat so you can see where it’s been applied with good coverage.
Another tip is to apply the coat as soon as electronics are opened from their static proof bags, so the boards are as clean as possible. This will help keep the silicone adhered to the surface.
Good points. I see now that checking with a UV light would be very helpful!
I’ve tried a product called liquid electrical tape that is a little better consistency and is applied with its own internal brush but if an ESC goes down in the water it’s probably gonna pop. Are use conformal coat on my flight control board and on the motor wires where they connect mostly to keep iron filings from shorting anything out👍 by the way I’m loving this content.
Good point about protection from iron filings. Thanks!
Would be amazing if you could test the "regular" mg chemicals conformal coating :)
Thanks very helpful
You need a uv light to see the coating on the esc or fc
Great informative video as i just got my first tube of this stuff. so here's a question : can i put the good old conformal coating and rub this kotking as a second layer? is there any harm in that ? thanks in advance
You should do a shootout video of the same test with this stuff vs conformal coating vs Corrosion X, the original waterproofer of choice! And as another viewer said, a blacklight might be helpful when you're applying it.
Yes great idea!
Looks like repurposed silicone sealant :P For transparency issue maybe adding some dye could help. Like to make it for. ex. transparent blue. Having only kotking I would probably try a hybrid approach - transparent shrink wrap on electronics and then seal ends with kotking - especially for solo ESCs.
Totally agree! I do wonder if it really has any special properties compared to silicone sealants. And I do think it could be useful for some of those applications.
SCC With blacklighting from MG Chemicals hands down THE BEST! 2 coats!
QUESTION: Which do YOU prefer for waterproofing?? Conformal coating? KOTKING? 🤔
conformal, I conformal coat all of my kwads
And you let it dry properly before test?
Sure did
The multi-layer on the edges of the pcb must be hard to cover
Not too bad, but the board does have to stay flat for the whole drying time.
@@RCwithAdam1 I tried nail varnish on a pcb a few years ago but it started to chip on the edges, nice video :-)
even a barometer can be filled with it?
No. I'm sure that would cause false readings. A barometer has to be able to sense ambient air pressure.
@@RCwithAdam1 I think so too. In Kotking videos, the manufacturer fills absolutely everything, including connectors.
Ever considered using hot glue? It works pretty darn well...
so you dont recommend this product? What do you recommend then?
Right now I recommend MG Chemicals silicone conformal coating (#422C).
Adam, a very nice and complete review, thank you.
Glad to help!
anything u coat is gone forever so be sure to not need to unsolder anything
especially SMA antennas !!!!
you can use a soldering iron to go through it. used it before and done changes to components no problems.
Not so conformal coating
Lol apparently!
Great review. It is refreshing to see honest good review after all "I gotta feed my children" reviewers. This looks like it is worse than nail polish.
I was just talking to someone about that the other day. It’s getting bad. We’re saturated with RUclips drone “review” channels that aren’t doing anything but flying around awkwardly for awhile (to get your view/view time/their money) and have them tell you “yep it’s good, it flies” and then shoving a buy now link (that they benefit from) in your face.
I mean good for them I guess. The recipe works. RUclips is like a echo chamber, people are usually searching for things they’re already interested in so when they watch a video about a drone (or any product) that they’re already thinking about, it only takes a small nudge (and that buy now link) to make them pull the trigger.
The irony is I never had to worry about putting several layers on and I fly over water more times than not.... I accidentally dropped a drone in the water the other week, shook it off so water wouldn't drip on the lens, dried the lens off, and flew. Landed in a creek two days ago on some shallow rocks and spent a few minutes trying to turtle mode before wading in 40 degree water to grab it lol. Completely fine for another flight. It's way better than conformal coating since I can cover usb ports and a few minutes of picking it out and the USB port is good to use again :) So it's more of a YMMV. Trying to figure out the exact silicone stuff they use and just buy it in bulk .
@@jacobscoville2044 I am sorry, are you selling this product ? Because that is what you sound like. Also, read what you wrote, you made no sense at all.
TLDR: I can't conformal coat usb ports. This works with one coat in my use cases. I submerge my drones weekly. I'm hoping to find a bulk source so I don't have to pay for a little bottle, so how am I selling it?
@@jacobscoville2044 Great, then make a video and share your secrets. Why would you conformal coat usb port ? Avoid it and put some silicone grease in there if you are worried about water.
TBH, Adam, you are way too stingy when applying stuff. Same with the conformal coating. Here eg, 06:36 why aren't the wires covered? Sure, it's not nessesary, but it also doesn't hurt. Better safe than sorry. And that stinginess leads to lack of silicone under the wires. You have to apply a lot and then move the esc around to make sure it gets everywhere. Lift the wires. What's with the capacitor's connection? Can't see any silicone there. You can't just rely on things. You have to make sure! My waterproof quad looks like a gummybear. That's how you do it.
Yet a good video :-)
so basically you're not good at applying it so it sucks
What is the right way to apply it?