2021 Mr Steele Gear Break Down (ANALOG FPV GOGGLES?) Fusion v2.15 Update 🔥
HTML-код
- Опубликовано: 5 сен 2024
- Questions Check here V
_ Goggles _
Ethix Goggle Strap - bit.ly/2WKCwT0
- NEW FPV Goggles- bit.ly/2TI3UkN
- **NEW FPV Goggles Receiver - bit.ly/2PP5WzH
(Antennas)
- **NEW FPV Receiving antenna (omni) - bit.ly/30mTSrl
- **FPV Receiving antenna (patch) - bit.ly/3bsS1rl
- Ear Bud (for Quad Audio) - bit.ly/2MALJdG
Ready To Fly Mr Steele Drone - bit.ly/2RMwbET
- NewBeeDrone Foam "HDOv1" - bit.ly/2PS4kVL
ETHiX is my Company & we aim to refine FPV.
Please check us out - ethixltd.com
_ ETHIX APPAREL _
- Triple E Hat - bit.ly/2zxBx0g
- Black Ethix - bit.ly/3fE0RCq
- T Shirt - bit.ly/3duvgkO
- Hoody - bit.ly/2yBtAr7
- Beanie - bit.ly/3fEPydn
- Stickers - bit.ly/2WJmFEh
MY personal Amazon Shop.
www.amazon.com...
Please Follow me on other platforms
TIkTokP: / mrsteelefpv
Instagram: / mrsteelefpv
Facebook: / mrsteelefpv
* / mrsteelefpv
My PODCAST (CHECK IT OUT)
teamfailsafe.li...
_MUSIC _
Outro Tune
MIss Li "Stuck In The Sand"
_ Kwad Gear _
- Drone Frame - bit.ly/2SWdNKd
- 6S motors - bit.ly/2znYfVB
- 4S Motors - bit.ly/2NBN185
- **NEW FC - bit.ly/3neYhX0
- **NEW ESC - bit.ly/3qXUwr5
- **NEW Props - bit.ly/37gmGpI
- FPV Cam (camera tilt 25°) - bit.ly/3czLZTC
- Ethix FPV Cam Micro - bit.ly/35WedFN
- NEW* Video transmitting antenna - bit.ly/2YURw3w
- Video Transmitter 800mW - bit.ly/2MH5KPZ
- 6S Battery - bit.ly/2HvLY5E
- Ethix Battery Strap - bit.ly/3fEC419 & bit.ly/2yOR241
- Lightweight HD cam - amzn.to/2WN1IIl
- New HD Cam - amzn.to/2Lpmrg1
- Old cam Lens protector MUST HAVE! - amzn.to/2O9ehso
- New cam Lens protector MUST HAVE! - amzn.to/2NzQmkW
- ETHIX Gopro Protection - bit.ly/2YSFQhx
- Ethic GoPro Strap - bit.ly/2AdIsfy
- NEW* ALL UP WEIGHT - 596g -
_ ETHIX Packing Gear _
- NEW Back Pack - bit.ly/329rVDr
- Radio Bag - bit.ly/2WlMgnw
- Heated Battery Bag - bit.ly/3bl6YbG
- Tool Kit - bit.ly/2YUTcJZ
- PROP Bag - bit.ly/2Wm7Qbv
_ Radio Gear _
- Ethix Neck Strap - bit.ly/3cm0E52
- Radio - X9d -
- Radio Transmitter (long range) - bit.ly/2PglGqw
- Radio Receiver - bit.ly/2OE6NNK
_ Battery Charging Setup _
- Charger- amzn.to/2nKx0Pe
- Power Supply - amzn.to/2MPLI2k
- Parallel Charging Board - bit.ly/2MiCDTw
- Battery Checker - bit.ly/2yNyBg3
_ Home Camera SETUP_
- Sony A7 cam - amzn.to/2GzAleG
- Macro - amzn.to/2Ds9v4D
- Wide angle - amzn.to/2HZzQfV
- fluffy critter - amzn.to/2mCL9xo
_ Tools/parts _
- ETHIX Prop Tool - bit.ly/3couohD
- Tool Kit - bit.ly/2YUTcJZ
- ETHIX builders cable set - bit.ly/2WKCSsT
- Field Soldering Iron (literally, best thing I have ever purchased)
bit.ly/2PhoOma
- *Soldering Iron Cable (need) - bit.ly/2MtqB8T
- Quality solder - amzn.to/2uJ89z3
- Quality Electrical Tape - amzn.to/2mzWkqp
- Quality Heat Shrink -amzn.to/2uH96rP
#FPVFreestyle #Ethix #Drone
NEW FUSION FIRMWARE IS AT 14:40 🚀
👍
Muse Cover!!!
Why fusion over rapidfire? :-D
the fusion firmware update is amazing
One more question, plz. How’s the new deluxe heated lipo bag coming along? Love my og bag. Also any update on the new prop tool? Thank you for taking the time to share your knowledge with us.
This is why we love you brother! Always respected your opinions on gear, and love how you always fully test something before you recommend it.
Yes and that since 7 Years , crazy how time flies...
I have been running your vas antenna kit for a while now. I have never had an issue and I appreciate that. You got the goods man!
@Alex Lin imo I feel VAS makes a superior product in general. At the end of the day it’s all about the end user. I prefer the ion v2 and I just tried the minion which is great as well.
Will you get better signal, idk it is hard to say. I have lots of videos using Mr. Steele antenna combo (almost all videos) I believe the day I installed his antenna combo I solved my issues with my video feed.
Worth the money imo.
@@HolaACchillin what about the ion vs the mad mushroom
Do you need a patch still?
love your philosophy for engineering. simplicity after durability and function. This is what can happen when systems engineers and software engineers team up. Big picture put into practice. Then more practice makes perfect. I will be buying one of these as soon as i make sure it can be used for DJI analog mod.
i really wonder sometimes, how they expect to design auto pilot without the best pilots' opinion. thanks for changing the game sir.
Im just glad one of the best pilots hasn't switched to HD because then I can say analog is better and have a reason not to spend the money for HD
just because 1 guy says it, does not make it true. literally everyone else agrees hd is better
@@Nib_Nob-t7x it looks better but has higher latency. depends on what u want
@@Kevin.OBrien44 the latency difference is so little in Dji systems that you would barley notice if any. The only reason Steele recommends the things he does is because he has brand deals with those companies.
I sold my dji V2 and Dji goggle 2,and now looking for a analog’s system..
First thing he says is thank you for taking the time to watch this video.
Instant like.
I live right down the road from the VAS shop. Alex is a super nice guy.. he flys with all the stone blue hobbies guys.
I bought TBS Fusion 2 weeks agou (used True-D till now) and the difference is just huge! Totally love it! And now it's blessed by Mr Steele himself :D
Love your channel and I still have never flown fpv, you are one of the main people that I love to watch freestyle 🙏🔥
Wow I literally was looking for the fusion update about an hour before this was posted time to check again 😁
Get it
@@MrSteeleFPV So used the new firmware at a race today and i freaky love it!!! Thank you so much for the hardwork.. I wont lie I had a few moments when i wanted to throw my goggles because i disliked the older interface so mmuch.....Thanks again
Good idea with the microfiber towel. I use the rectangle piece of foam that comes in the box of a new lipo. It fits perfectly over the goggle lens and stays in place.
That Fusion analyzer is very cool. I only fly DJI, so if Ethix/TBS made a stand alone device to test RF in flying spots that might be pretty cool.
VAS Antennas are amazing! I will get myself a TBS Fusion soon too. I'm still amazed by the quality of my internal aomway commander module tho! But it's time for something new so the TBS Fusion will probably be a great Module :)
Hello Larsco FPV do you have now the TBS Fusion? Im also fly with the Intern Skyzone O30 Module but soon i get the Fusion. Im Really wondering about the difference. I hope for a big Improvement. Yes and the Antennas from VAS are probably the best. Good flights!
@@stefankellenberger8315 I received it and it's working really good so far! :) I get almost no breakup during a Race. I've never tried it for Longrange but I'll try it soon. TBS also added a new Longrange mode in the last firmware update.
(Können auch Deutsch schreiben wenn du willst)
the new interface for the fusion is LIT! great job!
I have DJI but I still love analog
Awesome job on that Fusion firmware update. Can’t wait to update and try it out. Look wayyyyyy more user friendly
Whoa I love that spectrum analyzer. Cool features man.
That was so informative, hearing your personal experience and what works for you, and i think i want a fusion now after hearing you explain the RF Floor ect.. on those.
Bugger me you snuck in your bloody mustache when I started up the Google's cheeky bugger lol
Good call with the microfiber cloth. I love little details like those.
Always wondered about the hello kitty lmao
i like the spec analyzer split screen when selecting channels. very nice!
The hello kitty is back in the game!
Tall goggle antenna was the greatest advice ever. This cleaned up my signal so much Thanks.
Also tot mension sky04x has one of the best oled screens with Same resolution like the hdo2. The clarity is amazing.
That interface and set of features is awesome. Wish it was out when I made my choice...
Personally not considering digital until at least after Orqa release whatever they have planned.
You’re awesome bro. Thank you so much for sharing the knowledge!
Thank You a very much needed update. You made me a very happy flyer. Thank You for taking the time for the over view as well.
We’ve seen you try out the DJI goggles, have you tried shark byte as well? Would be curious to learn your thoughts about that.
Also, we know you use HDO2s, but I’m also curious if you’ve tried Sky04Os and Orqas, and if so, how do you think those stack up?
Currently using 03Os, but if I’m switching, definitely getting a fusion module!
The problem with these "what I'm using right now" videos is the lack of comparison to other devices - _why_ are you using these right now, instead of x, y, or z?
Once you start using audio it’s hard not to...
I fly your quads. They’re amazing. Followed your build video and have never regretted following your advice when building a quad.
Are you going to do an updated build with the fettec setup? Pids, tune, etc?
Thanks bro for the content!
You don't need the discharge rate or a lipo, you can power it with 2 or 3 18650 and you'll be saving you the all the problems lipos give.
Yes! Finally getting a 2021 EDC video thank you!
Strap 2.0 will be my next ETHIX purchase...
This was an extremely helpful segment into the tbs fusion👊👊😎🍻🍻🍻
I picked some attitude v6's for like $240 used, and I enjoy flying tiny whoops. There are still uses for analog but the new prices are going to have to start dropping to keep people buying. I never would have spent $389 for these.
Love all your videos man. Thanks for all the info. All your efforts are very helpful.
Thanks for the video. Will try out an 90° adapter for my mad mushroom antenna.
I'm glad you're now runnin said FUSION RX jus for this purpose!!
Thanks for sharing your insights Steele! You make it all look too easy :)
I really wish DJI would add audio as an option for the air unit, it's still more expensive than I'm willing to spend but it's a bummer that there's no way to use audio with it.
Here's hoping that they do with future products in their digital fpv lineup... The new drone sends audio to the v2 goggles, I've tried it.
Really cool vid and wow - that fusion module is dope! I was always wondering why your analog signal is so consitantly good even if you hide your drone behind tons of concrete... Did you ever test the orqa fpv.one? What made you stick with the HDO2?
I'd also be more interested in that Quad-Audio. Once my quad is up and away - not hearing the motors and props at all is quite a bit confusing for me - this feedback is quite helpful to gauge how much throttle you're actually punching into them and if something spins incorrectly you just simply hear it directly. I can totally see why you want to have this in your quad.
I stuck with hdo2 because they are smaller and have diopter adjustments built in
@@MrSteeleFPV With my astigmatism I might have to go for the FPV.one :D
Glad I went with the tbs fusion instead of the rapid fire
checked out the 2.16 fusion update.. thank the heavens!!!!!!!! so much easier to use
Audio is great, until your video starts to break up and your audio breaks up too. Sounds like ESD in my ear.
That is exactly what I do with my HDO2's as well, I just use the lens cloth that comes with Fatsharks though, always worried about getting scratched lenses.
Ya man the old hello kitty steele is back😂
them cat like reflexes tho..
good talk chief. sorry i was soooo late to the party.. troubled times in the kingdom.
Your the best pilot I know of
covered my analog goggles with TBS stickers just to keep it oldschool, but i might be installing the air unit soon to use my DJI v2 goggles. i'm never going to give up on real life but a flying deep fake is an easy blue pill to swallow. i needed some quality dioptics so i figured why not if it can do both with a module. your fatsharks still look very comfy tho. to put things in perspective i just spent 1000 on input/output over the winter and my best quad is a souped up eachine wizard. I got the tracer setup and DJI video finally , with your blessing.
Ethix moon ? :)
Yup, VAS and ETHIX got them antennas on lock fo sho! Gonna need a little more to convince me to get off RapidFire though.
Not trying to sell you on anything stick with what you know :)
@@MrSteeleFPV absolutely! I learned that matto from you and have been preaching it for 2 1/2 years now lol. Dom v3, kiss v1, kiss 24A, X9D+. Ect ect
Totally buying analog this weekend haha. Way cheaper than digital. Hopefully it lasts awhile :)
It’s not cheaper I just got orqa and rapidfire with connect module and battery more expensive than dji goggles
@@Drift-fpv depends what he means by cheaper. I have gone analogue aswell as the cameras/vtx/antennas are all currently dirt cheap compared with digital.
And good goggles like orqa and fatshark have hdmi in which allow for newer digital systems to be used as add ons. No reason to be locked into 1 ecosystem :)
@@craigjohnstone87 yes mate that’s why I went orqa dji is a shut door orqa said they will keep it open source only got mine Wednesday so I ain’t flown them yet but they look real nice and with things like the connect module they seam like they trying to innovate which is a good thing I am still on the fence and wonder did do the right thing but it’s done now lol
Its not, only if you buy crappy goggles, i would definitly buy digital!!!
@@FreshPanda97 and currently be locked into a closed ecosystem where after the latest launch dji made very clear actual fpv pilots are not their concern. Its all about that drone now. Goodbye any airunit innovation.
Sharkbyte isn't there yet, but they have stated they plan on listening to the consumer in bi weekly updates and committed to it. So improvement should be seen.
Orqa are also entering the frame and likely to have a modular system.
Oled twin panels v box goggle dji lcd. Im happy to wait!
Going to flash my Fusion module today and check out this new firmware.
From the start of the video, I pressed the letter L on my keyboard 4 times to skip 10 sec, the 4 time I hit that key, the only word I heard was "analog" :)
have analog and im not dji licenzed. yeah!!!
Appreciate the antenna links - Just picked me up a set 💪 Now to wait for the backorder lol
Love the hello kitty
gear bag review, i'm going from DJI mavic to fpv and have been learning about the process for about 12 months have picked up a cheap tiny whoop from betafpv and looking to go to 5"
I'm here because of the mustache... and to comment. Nailed it. Great vid.
👍👍Agreed. I like having audio at critical point during my flights to know how much prop rpm is being generated for an indication of needing more or less power at a given time. Sure I can fly without it but it's like driving a real car remotely and not being able to hear the engine to know when to down or up shift for turns or powering up a hill until the sound hits me half a second later.
My Stingy V2 didn't have one and it REALLY bugged me.
P.S. Now that I've watched the res of the vid... Totally diggin the TBS module...New season, new upgrades. Thanks man. 😁👍
Thank u, f#@% digital. Just for the principal analogue systems seem better, just got my head around the way everything works. Your hydrodipping is amazing too
Loving that spectrum analyser, possibly one of the handiest things I’ve seen in a while, just wondering, as I know you’re all about keeping it simple, why does it highlight the channels with most interference? Would it not be simpler to show the best channels for the environment?
Sometimes there are too many “best” options. Aka a clean environment so worst is more feasible
Love analog for ever
Hard flex with the Tesla.
I failed by updating the firmware, anyone else with same problem? My Fusion stucks in bootloader mode
Following your review I’ve purchased one of these and they’re great 🙌
Dude, updating my Fusion now. Thanks for the breakdown.
Awesome sauce my man. Great break down.
Well I guess im upgrading my module today! THANK YOU! i;ve hated the menu! and was half tempted to go back to my rapid fire! this changes that! what would be awesome to have built in is the ability to scan down to the 800 Mhz, so you can also see your control link noise floor!
That’s on the back of the big boy crossfire This module couldn’t do that because the antennas are for 5.8
@@MrSteeleFPV dang I only have the micro TX! Kinda figured that would be an issue
At last new interface 😁💪
Waiting for Ethix Pink Goggle strap or Purple to match your Hello Kitty Goggle...
😆
lol. Maybe a one off
@@MrSteeleFPV Woaaaahhhh please make it available in public like the greens and brown (purple please, purple please) 😁
Ok ok maybe. I’ll
Think About it
@@MrSteeleFPV 😆 Ethix 2021 😋
What's up with your overall disdain of 3D printed objects? It's really fascinating. Great review. Thanks for your input and efforts into the hobby.
3D printing is for prototyping. Not final products if it can be helped
I suppose if I had the ability and connections to make an idea a finished product I wouldn't use 3D prints either.
Man I wish I could just pull the trigger on the BNF Apex....
my budget is saying HOLD!!!!
weak....
Wow. I am an EE that always uses RF 90 Deg SMA adaptors at work. I recently bought a cheap batch of them on Ebay and they have been popping off when the techs tighten them, and they use a SMA Torque wrench. I have been tossing them out. Never had the issue with the more expensive brands. But hey, thanks for you trick on soldering them at the joint. Duh, never that of doing that, I will do that with the ones I have left.
TBS make a great product from the evo vtx to the tango 2 to the fusion rx and cant wait to see what they come up with newt well done TBS
the earbud helps a lot.. must have!
Nice work man
!!
I wish there was more selection for people with astigmatism (the diopters are spherical, for myopia and hyperopia, I need cylindrical diopters). Everyone stopped supporting custom lens inserts accept Orqa. I got the Cobra X to start with so I can wear my glasses.
am I understanding correctly that with those 2 antennas (and the way the way you position them) your goggles won't be able to receive video signal when your drone is right above you?
I mean. If you’re like 500m directly above yourself sure.. but that’s not a common thing that happens. If it is I turn my Omni sideways
@@MrSteeleFPV cool, gotcha. Wasn't sure how much it matters.
The same Setup I fly and love. Can u tell us how to make a long MadMushRoom V2?
Lol. I didn’t make mine custom. I asked Alex to make it. Check the video description :)
Very cool. Can't wait to get home and update
Steele: ...u can scratch the lenses...
Also Stelee after copule min: 6:11
Hiya dude awesome video love seeing what other peeps use I have question tbs fusion any rolling/black screens like with rapidfire long range or freestyle
are usb video receivers any good? I dont want to put googles on my face, i want it on a simple screen...
I love your Hello Kitty goggs ❤️❤️
A whop bop-a-lu a whop bam boo!
I almost bought the older crossfire unit for my first quad and radio and since there isn't alot of ppl I watch I always seem to be just days late with purchasing the last model stuff haha.. so I ordered the new tbs unit and im basically building your setup because it seems to work well and I don't like changing around when it comes to stuff like this haha I guess call it old fashioned but when I find stuff that works I hate when they quit making it and then the newer model sucks haha :) thanks :)
Thank you for Sharing... Steele....!!!
Woot
Sounds like its a good time to update my from La forge V3s 😛👌👌
Word has it hello kitty increases range by 15%.
Legit...
I just got the DJI FPV yesterday..
It's great at what it does,
It's soul sucking megacorp sign your life away ask for permission to fly is Infuriating.
Keeping my FPV drone so my wife can fly, I can scout out locations..
and investing in new TBS Fusion. Just not sure if with digi adaptor or not....
kinda want oled...
I'm down for any open source competition
but the H for home and pause button are dope.
1k out behind a rock, no issues... I'll just fly back to your driveway for you sir...
tough problems to have...
how about BOTH !!!!
You should try the pepperbox xtreme, it's wider and higher gain, it is very large though
Hasbeen upgrade.. ilike word big and clear the last autosave autolock multi 👍👍
Got same antennas as you - they're really great!) And for sure - digital in 2021 or 2022 - have nothing to do with skill, right? :D
Forgot to list the fatshark battery.
I always wonder also what kinda fpv camera your running.. cuz it's looks so really super clear
Mr Steele swift v3 runcam
@@MrSteeleFPV thanks .. 😀
Bruh, sweet setup!
Love this video, so informative and interesting. What about antenna on the quad? Does anyone know which transmitting antenna is used?