Hello thank you for sharing your videos. Please make some videos about cutting different therads whith small lathes. I’m sure alot of people searching for that.
Magandang araw po prof johnny ako po yung nag inquir kanina jan... maraming salamat po napaka bait nyo po at napaka linaw mo po mag paliwanag.hehe😊 .. god bless you po..❤❤
hehe, diko inasahan na maririnig ko yan sa u, nakakataba ng puso. 🥰Thank you for subscribing. Just do your best in everything that you do and God will do the rest. keep safe!
Hi Allah, same method that i have performed in my tutorial video about CUTTING 60° THREADS BY THE USED OF LATHE MACHINE. the only difference is the number of teeth of the worm gear to be set for the chasing dial that will engage to the lead screw. in the wasino and takisawa brands of lathe, the number of teeth of worm gear is 21 while in some other brands like mazak is 14 teeth. and of course you must also look on the letter (inline with 1.75 located in the plate of chasing dial) in which the chasing dial must be engaged for every cut/pass of the tool in the workpiece. Thank you for watching and subscribing. God bless!
The best set of tutorial videos I have viewed so far. Can you send me your address so I can visit your school. And can you send me details about your classes. Thanks.
Sir mazak mate din po yung torno ko kakabili ko lang at wala po siya kasamang pamalit na gear. 76t spindle gear 88t N1 intermediate gear 60N2 intermediate gear 104 lead screw gear. Yung mga naka kabit po na gear is wala sa gear chart. Makaka kumpleto din po ba ako nang threading pag yan lang ang gear?salamat po
Bakit kasi hindi ka sakin bumili? hehe, nasa loob ng takip ang gear chart nakahiwalay sa thread chart hindi katulad ng ibang brand na magkasama sa isang plate.
sir johny anu po tawag at gamit ng lever na katabi ng roman numeral na lever sa MAZAK na brand yung right sidepo na lever katabi po ng roman numeral pls po naguguluhan po ako salamat po sir
Hi Ramil! ang lever na yon ay para sa automatic feed at threading. kung alam mo na ang main parts ng lathe machine ay isa yon sa minor parts ng quick change gear box. Salamat sa patuloy mong pagsubaybay sa aking tutorial videos. God bless!
Hi Mark, Bago ko sagutin ang tanong mo ay pakiwatch muna ang aking video tungkol sa CUTTING 60° INTERNAL TREAD at baka don palang ay masagot na ang tanong mo. Thank you and God bless!
![FNAF vs TF2 - Episode 2 [SFM]](http://i.ytimg.com/vi/z5b3V2-VLb0/mqdefault.jpg)
Cant stop from wayching this video. so impressive and informative!
Thank you po Prof. Johnny sa video very informative and easy to understand
Glad it was helpful!
Nabusog sa info sir thank you
Sarap panoorin sir habang kumakain nabubusog ako sa info salamat sir!
pinalulundag mo aking puso Mr Miguel, thank you and keep safe always!
Thankyou for this Informative Video Prof Johnny
My pleasure!
Nakakamiss naman po diyan sa Goodwill Sir! Keepsafe po lagi sir! Godbless po~
thank you Janine and keep safe too and God bless!
napaka informative at napaka galing mag explain...
thank you Wengzkie for such an encouraging remark and for subscribing. keep safe always!
Hello thank you for sharing your videos.
Please make some videos about cutting different therads whith small lathes.
I’m sure alot of people searching for that.
Magandang araw po prof johnny ako po yung nag inquir kanina jan... maraming salamat po napaka bait nyo po at napaka linaw mo po mag paliwanag.hehe😊 .. god bless you po..❤❤
hehe, diko inasahan na maririnig ko yan sa u, nakakataba ng puso. 🥰Thank you for subscribing. Just do your best in everything that you do and God will do the rest. keep safe!
good
Pashout out sir
Hello
Ihave one qoetion:
Whith small lathe like the lathe in the first this video is possible to cut acme therad?
Hi Sina, yes, it could cut acme thread same as bigger lathe can do. It's all in the machinist. Thank you for watching and subscribing. God bless!
How to chase dial indicator for 1.75 mm thread cutting?
Hi Allah, same method that i have performed in my tutorial video about CUTTING 60° THREADS BY THE USED OF LATHE MACHINE. the only difference is the number of teeth of the worm gear to be set for the chasing dial that will engage to the lead screw. in the wasino and takisawa brands of lathe, the number of teeth of worm gear is 21 while in some other brands like mazak is 14 teeth. and of course you must also look on the letter (inline with 1.75 located in the plate of chasing dial) in which the chasing dial must be engaged for every cut/pass of the tool in the workpiece. Thank you for watching and subscribing. God bless!
The best set of tutorial videos I have viewed so far. Can you send me your address so I can visit your school. And can you send me details about your classes. Thanks.
👏👏👏
Thank you Roald. God bless!
Sir mazak mate din po yung torno ko kakabili ko lang at wala po siya kasamang pamalit na gear.
76t spindle gear
88t N1 intermediate gear
60N2 intermediate gear
104 lead screw gear.
Yung mga naka kabit po na gear is wala sa gear chart. Makaka kumpleto din po ba ako nang threading pag yan lang ang gear?salamat po
Bakit kasi hindi ka sakin bumili? hehe, nasa loob ng takip ang gear chart nakahiwalay sa thread chart hindi katulad ng ibang brand na magkasama sa isang plate.
TUP manila kayo sir
Sir matibay po ba ganyan mini lathe machine po. Ano maximum diamiter pwede isalang sa mini lathe na ganyan po.
Hi Gery, tama lang ang tibay para sa kanyang laki, depende din minsan sa mga gagawin mo pyesa, ang pwede isalang ay 6 3/8 x 12 inches.
Salamat sir sa pg sagot sa tanong ko po. Godbless po sa inyo😇
sir johny anu po tawag at gamit ng lever na katabi ng roman numeral na lever sa MAZAK na brand yung right sidepo na lever katabi po ng roman numeral pls po naguguluhan po ako salamat po sir
Hi Ramil! ang lever na yon ay para sa automatic feed at threading. kung alam mo na ang main parts ng lathe machine ay isa yon sa minor parts ng quick change gear box. Salamat sa patuloy mong pagsubaybay sa aking tutorial videos. God bless!
Maraming salamat po sir jhony
Idol magkano ung ganyan na lathe machine?
Hi Jayson! 60,000.00 kung may time ka ay pumasyal ka dito at baka magustuhan mo ang iba kong lathe machines. Thank you and God bless!
Sir bakit po 29 di 30 para tumama po sa 60 degs. Tanung kulang po sir di ko kasi alam yung reason bakit ganun.
Hi Mark,
Bago ko sagutin ang tanong mo ay pakiwatch muna ang aking video tungkol sa CUTTING 60° INTERNAL TREAD at baka don palang ay masagot na ang tanong mo. Thank you and God bless!