Taper Turning Using Tailstock Offset Method

Поделиться
HTML-код
  • Опубликовано: 8 янв 2025

Комментарии •

  • @johnkinnane547
    @johnkinnane547 Год назад +1

    G’day and greetings from Tasmania Australia 🇦🇺 thank you for your great instructions on how to set up your lathe to cut a taper this was a great to see you doing it and it was a big help. Thank you for all your help kind regards John

  • @rachitsen_05_25
    @rachitsen_05_25 Год назад

    Thankyou so much sir ❤. You explained very well. From India 😊

  • @cat02791
    @cat02791 3 года назад +1

    Very informative video... thanks Prof. Johnny...

    • @profjohnny8624
      @profjohnny8624  3 года назад

      thank you too Abdelrahma for continuously watching my tutorial videos. stay safe always!

  • @stacybuena2742
    @stacybuena2742 3 года назад

    SIR SOBRANG LAKI PO NG IMPROVEMENT NG VIDEO NIYO SIR WAG NIYO PO KAMI KALIMUTAN SIR FROM BSME 1D 💓💓

    • @profjohnny8624
      @profjohnny8624  3 года назад

      hehe, thank you so much at di nyo rin ako nakakalimutan. tayo ang nagsimula nito kaya tayo pa din hanggang sa dulo ng walang hanggan

  • @aleleiumali7187
    @aleleiumali7187 3 года назад

    Sir, grabe po improvement ng pagkakaedit ng recent videos ninyo po sir. Mas nakakaenganyo pong panoorin 💙

    • @profjohnny8624
      @profjohnny8624  3 года назад +1

      akala ko ako ung gumwapo, kidding aside, gumagaling aking taga edit, and thank you Alelei for continuously watching my tutorial videos. stay safe!

  • @miguelsaguid1319
    @miguelsaguid1319 3 года назад

    Thanks po sa another video at kaalaman.

  • @johnraymacato8009
    @johnraymacato8009 3 года назад

    Thanks Prof. Johnny

  • @skyruz7773
    @skyruz7773 Год назад

    pano malalaman na 1:20 ratio ang gagamitin sa 100taper length.what if 2p0yung taper length ko ok lang ba gamitin 1:40 ratio para gamitin finding Bid diameter?

  • @raymondrixon2209
    @raymondrixon2209 Год назад

    hi prof johnny
    is this a morse taper and what size , i am trying to create a mt3 with tailstock method but with no luck , can you please explain the procedure , thankyou kindly ray

    • @profjohnny8624
      @profjohnny8624  Год назад

      Hi Ray, just follow the steps that I performed. That is applicable to all conventional lathe machines. Thank you and God bless!

    • @raymondrixon2209
      @raymondrixon2209 Год назад

      thankyou kindly , gentleman
      @@profjohnny8624

  • @reynaldyntatano4181
    @reynaldyntatano4181 3 года назад

    Thank you sir

    • @profjohnny8624
      @profjohnny8624  3 года назад

      Thank you Rey for watching and subscribing. God bless!

  • @hermierito9203
    @hermierito9203 2 года назад

    Prop.johny..formula po ng tapering in the lathe

  • @junrexgalbines2624
    @junrexgalbines2624 Год назад +1

    sir formula tailstock offset 35-20 =15 bakit 5 ang sayo

  • @deleondan9227
    @deleondan9227 3 года назад +1

    ME-2D ng Bulacan State University kaway naman dyan.

  • @domingopaas4758
    @domingopaas4758 2 года назад

    Sir pano nakuha ung ratio na 1:20

    • @profjohnny8624
      @profjohnny8624  2 года назад +1

      Hi Domingo!
      ang 1:20 ay given para macompute natin ang large diameter (D) ng taper. At ang ratio kagaya ng given na 1:20 ay unit ng taper sa millimeter which is the amount of taper per unit of length. halimbawa, ang isang tapered tool kagaya ng shank ng live center ay nag iincrease ang diameter nito mula sa kanyang dulo na may pinakamaliit na diameter ng 1 mm kada 20mm.
      Thank for watching and subscribing!

    • @domingopaas4758
      @domingopaas4758 2 года назад

      @@profjohnny8624 Thank you very much po Sir..

  • @lafrencenacion4221
    @lafrencenacion4221 3 года назад

    Sir materum musta po batang bata pa rin. 😊

    • @profjohnny8624
      @profjohnny8624  3 года назад

      Thank you, i hope you are doing well also. God Bless!