How To ORGANIZE Your TOOL BOX (Fastest and Best Way!)
HTML-код
- Опубликовано: 27 июл 2024
- How To ORGANIZE Your TOOL BOX (Fastest and Best Way!) In this video we show the #verycoolgang how to organize your tool box the best and fastest way possible! We show you how to get the best results when organizing a tool box. Let us know your thoughts on the best way to organize a tool box in the comments section below.
Хобби
BEST MILWAUKEE TOOL Wet/Dry Vacuum (M18 VS PACKOUT FUEL) ruclips.net/video/2HUDNpb5Jzw/видео.html
Yo Vince! Heat up that hole saw bit next time first with your torch. Leaves a MUCH cleaner and faster cut.
Even when you mess up a sentence, you never stutter, you just slow down and think of a word or words that fits best and you keep on going acting like you meant to say every word you spoke. That's a sign of a master talker.
I did this with my dewalt case thing i had laying around. Milwaukee tools in a dewalt case lol.
Been there done that!! 👍🏻
do you not have any GOD at all?
That would deter some thieves for sure! 😂
For finger holes I've heard you can use a piece of copper pipe held with some pliers/grips and heated at the other end, then you can melt vertical (or whatever angle you want) holes to whatever depth and diameter (use whatever diameter pipe fits your fingers) you want.
Sweet vid. Have an idea that I've used in the past.. cannot take the credit as learned it from a kaizen event. Trace and out cut with the razor through a few layers leaving tools a little proud. Wrap tools in aluminum foil. Lightly heat area with heat gun and place wrapped tools to desired depth. It perfectly fits tools. Either way awesome vid. Thank you.
Wow that’s a great idea!!
Great vid! I was in the Air Force many moons ago and worked on the flight-line. I got out in 86. I always liked how our tools were fitted in to foam just like the Kaizen foam today. I think they used a hot wire tool to do it back then. The organization had the purpose of lowering the amount of fod (foreign object damage) done to an aircraft engine, and it also helped to keep your tools organized. Since getting out, I have always wanted to do this with my tools, and I have to admit, the Kaizen foam makes it easy.
From Canada. I have a packout and the foam is a bit expensive so I just use a thicker carpet. Works pretty decent. They move around but are still protected a bit. Love the videos.
It doesn’t matter if your a carpenter, plumber, electrician or HVAC we love our tools. I just subscribed over a week ago you guys have a great RUclips channel👍
Thanks Cuz we appreciate it!
You did it again Vinnie! That was super slick! Thanks! 👍😉
Another Awesome Video!!!
Love these foam videos Vince! I watched a ton of videos and picked up some tricks in addition to yours. 1. Use a torch on your hole saw before drilling for a clean edge. Also, using a torch on a 1/2" copper pipe will make a great finger pull. Keep up the videos!
Good ideas, I’m gonna try them out!
Love the slow rise entrance! Thanks for sharing some great tips for using the kaizen foam. I bought a 2.25" x2' x 4' sheet from Rockler for $25 so I can do a couple of Packout boxes.
Where?
If you have the depth in your box, make the hole for your chargers (or any tools with cords) a little deeper. You can stash the cords under the tool, no cord mess.
And like said before, keep a thin layer of foam for the lid. Otherwise, good video for "shadowing" tools.
Dudes like a freaking cartoon character I love it!!!! Lol great vid Vince
VGC Construction I liked and Subscribed for the Liberty Bell
Good evening, VCG and all the gang! 👍🧰👍
Hi mom!
Thank you VCG
I’m definitely doing thins with my m12 set. dope video Vince
Hanks Vince, I firmly believe that the lid should have a thin layer of foam. Doing so sill have tools fully incased in foam for the absolute best protection.
I’ll try that on the next one cuz, thanks!
Hanks a lot! 👍
You beat me to it 👍👍👍😊
I must have watched the Beginning 100 Times I could not stop laughing watching Vince pop out like Super Hero Ready to save the Day
Valuable information. Thank you for the great work 👍👍👍👍👍👍👍👍😊
Like it! Great tips, having the foam in there is great so the tools don’t roll around. 😊
Nobody wants their tools rolling around!!
Great video. Thank you for this channel. It’s been helpful. I spent everyday in December looking at all the deals lol. Drove my wife crazy.
Haha that’s awesome Panda, but I hope your wife don’t hate us!! 🤣🤣
That intro though... 😎👌
Great video Vince!!! Hot soldering iron...I never would’ve thought it! Can’t thank you enough for all your suggestions! VCG totally rocks!!! You’re all awesome, entertaining and informative! You look after your viewers and I hope your viewers are appreciative like I am!!! Also on another note, Vince you and the Mrs( DYNAMIC DUO) is must see TV for me on the weekends! You both complement each other wonderfully and it’s so enjoyable to watch it weekly and I can’t thank you again! I have said it numerous times and I’ll keep saying it that a major channels to pick you guys up because your videos are amazing!I hope you have a great week!!!
Robert you are the best, we appreciate all your positive feedback and everything you contribute to the channel! Thanks for being part of the #verycoolgang
Thank you VCG Construction ...I speak the truth and from the heart and I’m proud member of the VCG gang in Chicago.
Visited a foam factory and that's how they make those layers! Heat gun and pancake them together.
0
Great video vince love the channel
It's Sooooo easy.... a Carve Man could do it.
Vin, what a great video thank you for sharing!!
Thanks Mario!
Yessssss!
Can’t wait for the drawers.
Great tip great vid👍👍
Great video thank u gentlemen 👍
Vince another great foam fitting video...! 👍
Yo Zee thanks!
Always liking those tips and tricks
Thanks John, we’ll keep them coming!!
Great video! Always learning something new on your channel!
Thank you Ryan!
Good Job! Very nice! Thank you! Like Button...Done.
Very cool vince
Instead of trying to clean the sharpie markings away, try spraying a coat of black plasti dip over the foam. It helps to hide the jagged cuts and makes it look like the foam molds around the tools.
whoa, that sounds serious and worth a try
I used the Milwaukee 18v heat gun to smooth all the edges works a treat
When that starts to crack, you'll have a huge mess
if you heat the holesaw up a bit it should seal the foam and stop the small bits of foam from braking off when you take your chukes in and out .Great video .
Great tips on better tool storage👍I small flat square tool bag with clip which I can hang up, I have clips for spanners or screwdrivers, with small bottle of lube like small sauce bottle, tread tapes. This save weight having carrying big bag or going back up n down get tools. Magnetic tray is good have if you up high.
Very nice organization tool box 👍
Thanks darkmagic, we appreciate it!
Great video Vince very informative thanks for your tips and tricks
Thanks Antonio, we appreciate it!
Kaizen inserts also sells precut foam inserts for every different storage box you can possible own for anyone that hasnt heard of them. They make the foam storage process a walk in the park. So easy a caveman can do it!!
Sweet dude!
Fantastic video as always Vince. @VCG Construction has lots of good ideas. I wish someone, maybe Milwaukee even, would sell a packet of templates that were the right size and shape of various tools. That way you could use them to layout the foam and not have to trace around the tools. Seems simple enough - they know what each tool shape is. Maybe not every tool they sell, but all the common ones you would put in a packout box.
Good idea Tim, you should start that business, sounds like a gold mine! Good luck cuz!
Great tips!
Thanks Padre!
Awsome work
Thanks Adam!
Out of the Box Thinking
Cool
The nation of organization.🙌🏽
Dats right, the greatest nation in the world !!
Yes indeed, yes indeed!!!
Great tips, I love your videos much luv from Detroit 👍
We ever eat at sweet water cafe?
They have good food.
Kaizen makes some great inserts and paired with packout it’s amazing. But unfortunately for my trade I just use the packout bag and throw my tools in. My load out constantly changes. Thanks for the video guys.
I like .... and you right... is more better... LOL
🤣🤣👍🏻
Nice tips brotha!!!
Thanks Edward!
Looks like we have FUEL model Vince back
👌🏽
Find
Ultimate
Energy
Level
In Vince
Your vids are awesome!!!!!!! I have watched a lot of them. Keep doing what your doing and I will soon also join. God bless you all!!
Great video !
Thanks Mark!
#200 to hit the LIKE BUTTON !!! LOL I guess I'm slowing down a bit.🤩😄 Thanks again for sharing your thoughts and videos Rodney
Thanks Rodney, you da man!!
HEY VINCE " DAS A NICE" Mr prince of power tools
Thanks Ruben, we appreciate it!
Nooice!
Like your channel
Good jod
Thank you galvez!
Another tip when cutting inserts make a half circle on each side for fingers to get in beside the tool.
Great video
Thanks explosion, we appreciate it!
I am going to pull the trigger on the Pack out next time it's on sale
Still on sale at Rural King stores.
@@jameselam8263 Or just call your local store and ask them if they have it in stock. I drove an hour away to pick up my combo kit.
@@someguy8523 yeah it may be store dependant at this point but my store still has it. From what I've seen Milwaukee is targeting small stores and rural communities. Yesterday I picked up the M18 Fuel router bare tool from Rural King and got a free 5.0 battery.
Jim Elam yes you are correct my store was also offering a free 5 amp battery and job site radio. Call your store and ask them if they have that offer available.
@@someguy8523 that one ended at the beginning of this week. They still have the super sawzall or 7 1/4" Fuel circular saw with a free 8.0 and a few other kits on sale. The weekly flyer is on the web page in the menu you can make any Rural King honor it.
Nah bro, I watched this video to hit that like button. 😎
Hi Guys!!! Awesome work Vince/Nick! You guys are clicking good lately on the video work. Hey Vince, could you do a video on how you organize your other Packout boxes such as the small/large/rolling boxes especially with hand tools? I've been going back-n-forth on which box is the best for hand tools, etc.
We’ll definitely work on getting that together!
I clicked the video because I love their content too much. I only own a drill.
You can use your half inch or 3/4 hole saw as well to make rounded finger holes by each opening.
CEO of excitement
We always try to keep it exciting!!
VCG Construction there’s so much hype in your videos, keep up the good work
Worksite organizational bliss. Coin that.
Well now I know how to do it, but I just need to get motivated to do it.
Just do it Noe!
I'm more accurate when I cut around the tools rather than trace then cut.......but I really like your results....may try again
Thanks for the video buddy. I like the foam idea in principle only. The foam organizes your tools without a doubt. The problem with foam is there is too much wasted space the I cannot use. If I used foam for my tools I would need 3 more boxes. Just my opinion, if it works for you great.
Great video start 😂 play the avengers end game song for the first few seconds would be perfect!
Run the hole dozer in reverse. It's cuts really smooth
I love the Kaizen foam, it makes it very easy to spot if a tool is missing ... Now I just have to wait for the foam to come on special here in Canada. At this moment I find it is still a little expensive.
Vince, I’d throw a layer of foam under the lid and cut down the bottom piece underneath, that way the tops of the tools aren’t hitting the lid plastic and rubbing, and anything heavy on top is less likely to squish the tools.
This way, the tools are completely encompassed in foam for full protection!
Good idea! 👍🏻
How much is the foam cutouts for the Milwaukee pack out boxes?
Impressive how much you were able to fit in there
So funny that this vid dropped today. For Xmas, my Family went “click happy” & ordered 6 each of 20mm, 30mm, & 57mm 2’x4’ sheets of Kaizen Foam from Fastcap; cuz I kept saying I wanted to organize my Packout tool boxes & organizers a lot better & make them, functional, lol. So, w/ all the Kaizen Foam I have & all my tools out & everything.....it’s kind of overwhelming a little. Like, where to begin & start making it look so pretty inside😅. Do gotta say that VCG is awesome, w/ the tool storage vids using Kaizen Foam, the Very Cool Gang; for helping ppl w/ tips, tricks, projects, etc...& bounce ideas off another person.
Also gotta thank those ppl who helped me out w/ customizing my Kaizen Foam for my storage needs & not being judgmental at all, & taking their time to really help out, especially w/ all the questions, lol. Not every community would be so kind & “offering”; but the Very Cool Gang is such a Family & that’s great 👍🏻
It’s really nice to know that help is out there, just have to not be afraid AND ask for it.
Thanks EVERYONE, & VCG😊
Cheers✌🏼
The #VeryCoolGang coolest community on all of the inter webs!! Thanks Cuz!!
Vince what do you do to store your consumables ( bolts ,screws, some of them are up to 5 inches long ) in. I was looking at a packout box. What do you do with pat boxes from one job to the next..
Glad you got your voice back bro
Thanks Javier, we appreciate it!
Hey there Vince, could it be done to the rolling cart inserting foam, that's my go to tool box and I need to secure my finish nailer gun, gen 3 hammer drill, impact driver, grinder, and circular saw wit four batteries and charger..Thanks!
vcg home depot has M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Combo Kit (4-Tool) with Two 5.0 Ah Batteries & PACKOUT Rolling Tool Box for $399
Nice, thanks for the heads up!
@@VCGConstruction Would you say that kit would be good for someone getting into Milwaukee tools?
z14sniperz PS4 100% thats only 57 dollars per item. An amazing deal
@@joshbenton810 And just like that they pulled the ad. I waited until today and now I can't get the set
z14sniperz PS4 if you click the link its still up I believe
Great video. Wondering if you can use the oscillating multitool for cutouts as well? Hot iron would work too, but with the smell :(
Chaulk marker works well so you don’t have to worry about leaving marks if you’re ocd.
mr home depot is the correct name for this guy.
4 Da Utube algorithm!
Milwaukee straight coined your idea. I'd sue for royalties. Haha
🤣🤣👍🏻
**sue ... got to love auto correct.
I like it but there is too much wasted space. There is an entire layer of foam underneath the tools that is doing dick all. Does Milwaukee make a shallow box for these situations? Great video guys.
Very nice and neat for someone who has plenty of boxes or not many tools but when you do this think of all the expensive wasted space. If you did this for most of your tools wouldn't you have to buy dozens of cases? Doesnt the packet protect your tools even without the foam?
Can you do a video or suggestions for a larger rolling tool chest like a dewalt tough chest ?
I made a seat that attaches to the packout system that I love, does that count?
Have you tried spraying your insert after you're done with a rubber coating like flex seal?
No I clicked on this video, because you made it:-)
Thanks Fried, we appreciate it!
Can’t wait till DeWalt 2.0 tough system rolls out!!
Another tip is to attach some Kaizen foam with double sided tape or glue to the top of the lid to compress down on your tools to better hold them in place.
i hope makita does this for their macpac system.
@VCG Construction if you take the tools out, grab a rag, spray some Windex on the rag and lightly scrub the Kaizen. The sharpie will easily come off the Kaizen.
Thanks Jim, I’ll try it tomorrow!
@@VCGConstruction no problem.
I've gone Milwaukee packout boxes filled with flex power tools lol
Are the foam inserts sold separately?