Sandwich Reball Tutorial - The Latest Method for iPhone 15. Step By Step Mijing Stencil & i2C Heater
HTML-код
- Опубликовано: 8 дек 2023
- In this video, I will show you the process of reballing an iPhone 15 or iPhone 15 Plus logic board. I use the Mijing Reballing Stencil and the i2C T20 AI Heater.
The iPhone 15 sandwich design is different than previous models. It has battery connector on one layer & the screen connector on the other. In other words, you HAVE to sandwich the board together for the phone to boot.
Watch the full video to learn how we normally reballing these sandwich boards. And check the links below for all the tools I show in this video.
Do you need your iPhone repaired? Contact me for a quote: www.vccboardrepairs.com/conta...
⭐T20 Heater w/ iPhone 15 Plates: www.diyfixtool.com/products/i...
⭐Mijing Reball Stencil & base (X to 14): www.diyfixtool.com/products/m...
⭐Mijing iPhone 15 Stencil (no base): www.mobilesentrix.com/mijing-...
⭐IC Stencils: www.diyfixtool.com/products/a...
⭐G-Lon Reballing Paste 158C: www.mobilesentrix.com/sp-x-mi...
⭐Chemwik Wick: amzn.to/41fHh7M
⭐Fume Extractor: www.vccboardrepairs.com/gear
⭐Aixun Soldering Iron: www.diyfixtool.com/products/a...
⭐Foam Swabs: amzn.to/3TkgmGc
⭐Clean Cloth: amzn.to/487BJOY
⭐KORAD DC Power Supply: amzn.to/45Qxjvc
Or Cheaper Alternative DC Power Supply: amzn.to/3Pcrq4m
⭐DCPS Ultra Sharp Probes; amzn.to/3qVvlGu
⭐45W USB C (PD) Charger: amzn.to/467Pz2v
⭐USB C Meter: amzn.to/3xrvQeT
⭐Top Board Only Repair Wiki Guide: repair.wiki/w/Which_iPhones_W...
Sadly, at the very end, we did end up with some issues, like Grayed Out WiFi. Although I do believe I may have messed something in the initial split, as I didn't have the right tools at that time.
Let me know down below in the comments, what you learned from this video!
▶Here are some other tools I have tested & fully recommend: www.vccboardrepairs.com/gear
▶Subscribe for more phone repair tool reviews & tutorials: ruclips.net/user/vccboardrep...
▶Need a repair? Or need to recover your data? Request a quote: www.vccboardrepairs.com/conta...
▶Useful Links◀
Crowdsourced repair solutions: repair.wiki/w/Repair_Wiki
Join my Locals Community: vccboardrepairs.com/locals-co...
30 Day Microsoldering Starter Course: vccboardrepairs.com/solder-co...
90 Day Advanced Solder Course: vccboardrepairs.com/90-day-co...
Buy a shirt: merch.vccboardrepairs.com
▶Phone Repair Videos◀
Microsoldering Repair Videos: • How To Fix iPhone 13 w...
Data Recovery Tutorials: • Where To Copy Your iTu...
Phone Repair Tool Reviews: • LIVE! iPhone 6S Plus O...
▶Best Thermal Cam Setup◀
Seek Compact Pro: amzn.to/34I4whX
Seek Stand: vccboardrepairs.com/buy-seek-...
Seek Macro Lens: www.vccboardrepairs.com/buy-m...
▶Social Media◀
Facebook Group: vccboardrepairs.com/vcc-fb-group
Facebook Page: / vccboardrepairs
Instagram: / vcc_board_repairs
TikTok: / vcc_board_repairs
▶About VCC Board Repairs◀
We are a Las Vegas, NV based repair shop who offers mail in repair services for microsoldering repairs & data recovery. Our specialty is iPhone, iPad, Samsung and other mobile devices. We also offer B2B pricing for repair shops. Contact us today for a quote: www.vccboardrepairs.com/conta...
▶Affiliate Note◀
This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support!
What did you learn from watching this video? Let me know below 👇👇👇
Cool 🎉 which microscope are you using exactly?
I dont understand why you wouldnt melt the solder balls while the stencil is still attached?
It literally tells you not to on the stencil.
It will warp and give you a bad reball
I'm using a Parco Microscope
Damn Thanks. I havnt used mine yet, I better read first!@@VCCBoardRepairs
Thank you so much for putting out all these amazing videos out. I have learned a lot and still learning, please don’t stop. Suggestion - you could create beginner friendly playlists where you explain some techniques and concepts in iPhone repairs. Thanks
I have the same kind of stencil for reballing the boards (peel-off kind) and I can’t get all the paste to stick to the board instead of the stencil. You make it look so easy
Jessie’s favorite word is essentially 🤣🤣 I counted 28 times Great video essentially
Just wait for the next video, i'll be essentially worse
I like and appreciate your knowledge, your videos explain it very well.
Glad you like them!
I am beginning to learn more of these micro soldering repairs and your videos have been tremendously helpful.
That's awesome! Thank you!
Essentially this and essentially that
You're essentially correct
The explainer video is great.
It’s a great explainer video.
Wow, the video is very good, explained clearly and in detail!
you are great😀😀😀
I’m benefiting a lot from ur videos bro so keep up the good work ❤
Appreciate that
Love that you did all the work just for it to have no WiFi. Realistic lol.
Hope you leave a comment when you figure it out. Curious if it was just the sandwich
It happen 🥹
But yes I will post update soon
Thanks very very much indeed 🎉🎉🎉
You are very welcome
Great job thanks for the vid !
Thank you! Appreciate the support!
@@VCCBoardRepairs anytime I have learned so much from a lot of your videos and continue to learn and develop my skills.
tbf the magnets in those setups aren't close or strong enough to make much of difference when reballing
but using an aluminum is always better
In regards to what?
@@VCCBoardRepairs yea i should've put time stamps
i meant using a magnetic ppt spreader won't really matter much when using those board holders to reball the middle layer
For those kind of boards you need to use IAtlas tool, and press board and no problems..
Yes, but not necessary
@@VCCBoardRepairs Agree, but when board is long like 12 series most of the time is bend a bit at the ends and with IAtlas you can press board to fix that.
Nice video Jesse!
I really like those foam swabs, unfortunately can’t find them available over here and through Amazon they are quite expensive…
Ah that sucks!
i learned we should be patient
💯
Why are you having to reball sandwich boards? Did I miss that? I’ve kind of been out of the industry for about a year, but I’m opening a store in 2 months. I want to start practicing soldering again.
It's a tutorial on how to reball a sandwich
Cpu reball pleeeeeezz
Next week! 😍
Hey Jessie
Did you manage to fix the WiFi issue, great work my friend 👌
i haven't had time to work on it unfortunately, so no.
@@VCCBoardRepairs ok no worries, a future video maybe 👍
Thank you! Appreciate the support!