Awesome video Jesse, as always! After removing the stencil off the bottom board, I used also the hot air to form the balls, but lately I stopped that… just put the board on the heat plate and let the balls form. You won’t get those small balls that you need to clean anymore
Probs a beginner question, but why does it mean game over if baseband is dead? 19:30 for reference Can’t it just be reballed/replaced from donor board?
THIS IS SOOOOOOOO AWESOMEEEEE!!! im so glad i found your video. I will def will be in contact about getting my iphone fixed. Really loved the video and how you take your time to address the issues and not take short cuts. Excellent!!! Price of repair is small compared to cost of new phone or even used phone that who knows may have the same issues.
I've been able to activate my iPhone 13 pro using clamps and the reflashing technique. Now I have to be very careful with the tools I'll receive and hopefully do a successful reball. Your video has been immensely helpful already
The solder used in between the sandwich layers if off lower melting point right ? So it is possible to float the different layers with flux, poke the board and let it cool without actually separating it ? That way you reflow potentially broken balls without having to reball everything I did watch the full video, very useful to know that if the phone was restored without baseband working then it will require a restore everytime to check if the repair was a success.
12 series and newer do not have low melt solder, so that won't work. It's also not a good idea to do that because more often than not, there's ripped pads in between the sandwich. You need to split it to check for that. Otherwise, you're setting yourself up for a warranty repair
Bro, I've recently found interest in your channel. Thank you for making it. What I'd like to know is the name of the software that you use to view the details of the board?
Jesse, I saw you video on a se where you used jumper wires to fix mb and explained what problems a bad charged flex would cause. I replaced the charger flex on my iphone 12 and now it charges with cord. But my touch does not work now. Can charge port on this model cause this because I ordere a new screen for it.
235°C is too hight to remove it...using force to remove the upper part will reap off the pad. Let it heat up to about 180°C and use hot air gun of 150°C with a wide nozzle in low air to heat through in a circular manner just like you do when removing protective plates.
I wanted to ask, I have the exact same problem, but I don't want to lose the version my phone has. Is it possible to bypass the forced restore after the repair process?
I use the same solder wick. I found it by accident, I was ordering it from NRF, until I found out he is buying this and repooling it and selling it at a premium. I watched an old video of his and saw him using it from the original spool, so I went and bought 4 of them. Although I don't condone the practice, it is indeed a superior product so in retrospect he did me a favor.
Hey Jesse - I bought the scope you linked, as well as the 4k camera and the .5 barlow. I've got this set up on a 4k TV but what I see on the screen does NOT look like 4k. Through the scope with my eyes is amazing, but the screen, not so much. What's your secret?
This is a great question you can post about in my group. Along with pictures and how you have everything plugged in Https://www.vccboardrepairs.com/vcc-fb-group
My brother has the same problem on his iPhone 12, the device has not been reset and I checked via 3utools the imei number is there, is it enough to restore it to fix the Modem Firmware blank in the settings?
Funny that a company fix the prices and later they offer disscounts because the price maybe are too high..or why not sale to the right price from the start?
In you video you say many times about getting disscounts on your website VCCBoardRepairs. By the way is annoying to see adds in your video talking about thatand not get advise about that will be adds on the video@@VCCBoardRepairs
My phone died. Brought it for repair. Told me it'll need boardwork. They did. Then told me baseband chip was causing the short. They removed it. Now I have a working iPhone with no cellular service (only wifi). Question: Will dual-sim adapters via bluetooth provide alternative cellular service? I had this crazy idea that since the sim is mounted on the adapter, it has it's own baseband chip there. sorry and and thank you in advance.
@@VCCBoardRepairs Thank you for the reply by the way. I also have a 12 ProMax like what you're working with in this video. My heart just broke after confirming there's really no other way outta this other than board/phone change
hello sir..i watch your video from start til the end...nice skill for board lvl repair..watching here from philippines...and lastly i already subscribe your channel..and hit like button...xd..hope to see more helpfull video from your channel..Have wonderfull day to you...God Bless!
probably the best youtube video i ever watched, to be honest
Appreciate it! Thank you so much
Fun fact if that resister is missing cameras will start off at 2X with a black preview window. GREAT WORK AS ALWAYS.
Good to know!
Awesome video Jesse, as always!
After removing the stencil off the bottom board, I used also the hot air to form the balls, but lately I stopped that… just put the board on the heat plate and let the balls form. You won’t get those small balls that you need to clean anymore
Ah interesting. I will try that next time & see
@@JohnWilliams-zo5jf I personally use Mechanic 148 and dry the paste before applying
@@mirceaalicu Great, I’ll check that out
@@mirceaalicu Maybe you should try make a video of you doing that
😂😂legend in the making☑️☑️
I meant to post about this technique
hi. I watched full this video and I love long videos with all techniques. keep going. this is real repair. thanks to you man. I am Hossein from Iran.
Thank you! Appreciate the support!
thanks for your work. Keep doing long videos and explanation. Helps as a "Beginner" a lot.
How do you deal with boards that have a slight bend in them?
Probs a beginner question, but why does it mean game over if baseband is dead? 19:30 for reference
Can’t it just be reballed/replaced from donor board?
It's paired & not replaceable
What's the name of the new board heater do you use?
www.vccboardrepairs.com/heater
thanks sir I also technicians but your videos it plays a hugely important rule in my knowledge in my field thanks for sharing real knowledge
THIS IS SOOOOOOOO AWESOMEEEEE!!! im so glad i found your video. I will def will be in contact about getting my iphone fixed. Really loved the video and how you take your time to address the issues and not take short cuts. Excellent!!! Price of repair is small compared to cost of new phone or even used phone that who knows may have the same issues.
Thanks a ton for the awesome feedback! Hit me up whenever you need help with your iPhone!
hey, when you swapping modem ic, it need to reprogramming?
There's no programming needed. But baseband cannot be replaced.
I've been able to activate my iPhone 13 pro using clamps and the reflashing technique. Now I have to be very careful with the tools I'll receive and hopefully do a successful reball.
Your video has been immensely helpful already
Appreciate it! Thank you so much
The solder used in between the sandwich layers if off lower melting point right ? So it is possible to float the different layers with flux, poke the board and let it cool without actually separating it ?
That way you reflow potentially broken balls without having to reball everything
I did watch the full video, very useful to know that if the phone was restored without baseband working then it will require a restore everytime to check if the repair was a success.
12 series and newer do not have low melt solder, so that won't work.
It's also not a good idea to do that because more often than not, there's ripped pads in between the sandwich. You need to split it to check for that. Otherwise, you're setting yourself up for a warranty repair
@@VCCBoardRepairs good to know, thanks for your reply.
Bro, I've recently found interest in your channel. Thank you for making it. What I'd like to know is the name of the software that you use to view the details of the board?
What solder u use for prepping the pads? Which temp? 😁 thx
183C solder to prep the pads: amzn.to/3OgqTfP
Thx Buddy!! 😁😬
Jesse, I saw you video on a se where you used jumper wires to fix mb and explained what problems a bad charged flex would cause. I replaced the charger flex on my iphone 12 and now it charges with cord. But my touch does not work now. Can charge port on this model cause this because I ordere a new screen for it.
Jessie, I replaced the screen and all is good otherbthan message gor mot original part but I don't care.
235°C is too hight to remove it...using force to remove the upper part will reap off the pad. Let it heat up to about 180°C and use hot air gun of 150°C with a wide nozzle in low air to heat through in a circular manner just like you do when removing protective plates.
How much would this cost for a 12 max pro
If you need this repaired, contact me for a quote: www.vccboardrepairs.com/contact-us
I wanted to ask, I have the exact same problem, but I don't want to lose the version my phone has. Is it possible to bypass the forced restore after the repair process?
No
Do we have to replace the thermal paste
I don't think it's necessary
Nice video Jesse greetings from Greece .
Appreciate it!
great work jesse and great watch as always
I use the same solder wick. I found it by accident, I was ordering it from NRF, until I found out he is buying this and repooling it and selling it at a premium. I watched an old video of his and saw him using it from the original spool, so I went and bought 4 of them. Although I don't condone the practice, it is indeed a superior product so in retrospect he did me a favor.
It's good stuff for sure! haha
zio
Can you replace a baseband ic if your baseband is completely broken?
Nope. It's game over
@@VCCBoardRepairs thank you
@@VCCBoardRepairs is wifi connected to the baseband because my phone still has wifi but the sim signal is duped
No they're different circuits
Hello, dear author, could you record a video on true-ton repair and battery percentage recovery using the A108 box programmer?
Good idea!
Hey Jesse - I bought the scope you linked, as well as the 4k camera and the .5 barlow. I've got this set up on a 4k TV but what I see on the screen does NOT look like 4k. Through the scope with my eyes is amazing, but the screen, not so much. What's your secret?
This is a great question you can post about in my group. Along with pictures and how you have everything plugged in
Https://www.vccboardrepairs.com/vcc-fb-group
I like the long videos. I like to c the hole process and hear advises.
Awesome! Thanks Edu RUclips
very nice!! where do u get the relife x paste from :)
I have it linked on my website: www.vccboardrepairs.com/gear
Why would I get message in settings that my iPhone 12 screen is not original after reconnecting it again Jesse?
Impressive work,, Better than Factoy.... Good job
Awesome work and yes I watched the full video
How much do you charge for that repair? or an estimate
Hi! If you'd like a quote, please send me a message through my site: www.vccboardrepairs.com/contact-us
Look forward to hearing from you.
good work!
I just watched this video ,this was so good❤❤
Appreciate that!
how much to fix baseband issue on a 12 pro max
Hi. Send me a message through my website for a quote: www.vccboardrepairs.com/contact-us
Are these phones reliable after repair i have a iphone 12 with same problem
Yes Definitely! As long as a reputable technician performs the repair
How much
Great video bro! I need you to teach me the ways to be a goat like you! 🐐
Appreciate it
My brother has the same problem on his iPhone 12, the device has not been reset and I checked via 3utools the imei number is there, is it enough to restore it to fix the Modem Firmware blank in the settings?
No. Do not restore it. It has a motherboard problem
@@VCCBoardRepairs What about iOS updates? not too?
Software updates will not fix it. It's a hardware/motherboard problem
@@VCCBoardRepairs yess, i mean, if i’m update iOS, will it get stuck on activation? like reset/restore
Hello Jesse, keep up the good work. Dee
Thank you! Good to hear from you, brother!
Keep up the great work❤❤🔥🔥🔥🔥
Thank you! 🙌
Thanks A lot For sharing This Repair
Thank you! Appreciate the support!
how much for a job like that
Hi. If you'd like to mail in your phone for repair, message me for a quote: www.vccboardrepairs.com/contact-us
Funny that a company fix the prices and later they offer disscounts because the price maybe are too high..or why not sale to the right price from the start?
What are you referring to?
In you video you say many times about getting disscounts on your website VCCBoardRepairs. By the way is annoying to see adds in your video talking about thatand not get advise about that will be adds on the video@@VCCBoardRepairs
Very good video, like it very much
Appreciate it! Thank you so much
Iphone 12 error -1
Please help
I can't help
My phone died. Brought it for repair. Told me it'll need boardwork. They did. Then told me baseband chip was causing the short. They removed it. Now I have a working iPhone with no cellular service (only wifi). Question: Will dual-sim adapters via bluetooth provide alternative cellular service? I had this crazy idea that since the sim is mounted on the adapter, it has it's own baseband chip there. sorry and and thank you in advance.
No that won't work
@@VCCBoardRepairs so my only option would be full board replace or full phone replace.. oh god
@@VCCBoardRepairs Thank you for the reply by the way. I also have a 12 ProMax like what you're working with in this video. My heart just broke after confirming there's really no other way outta this other than board/phone change
hello sir..i watch your video from start til the end...nice skill for board lvl repair..watching here from philippines...and lastly i already subscribe your channel..and hit like button...xd..hope to see more helpfull video from your channel..Have wonderfull day to you...God Bless!
360P Video ???
No, it's 4K. You just have to wait for it to finish processing.
@@VCCBoardRepairs hahah lol Okay I was just looking out
Wow 🤩
I really appreciate your support. Thank you so much
❤
Thank you! Appreciate the support!
🎉❤
Thank you! Appreciate the support!