Hey Mike. As for the rather basic design of the thumb mount on your Rippa machine, I suspect the manufacturer originally intended for it to have a manual/fixed thumb so rotational wear would not have been a big deal. I agree that the pivot will likely be an area of concern for you with regular use of the movable hydraulic thumb. An upgrade will make good content though. Thanks for the review.
I think you are right about the manual thumb, there would be far less movement. I didn’t even think of that being a possibility for the design. Thanks for checking out my video Doug. Ps anyone reading this, go check out Doug’s channel, he has a much bigger Rippa excavator he bought at auction. Go check out his experience with his machine 👍
This is the kind of honest review you need when looking into some tools, equipment etc. No fake bullsh*t, no fake reviews. An honest review after some honest labour / jobs done. I hope these guys realise the worth of it.
I was one of the hobbyists lucky enough to get the 1 ton Rippa model w/ the foot pedals and easier access fuel tank w/ gage. I also got the cab which out to work well since I don't yet have a pole barn and live in the Midwest with plenty of snow. At 15 hours, mine has saved me blood, sweat, tears and most importantly medical insurance deductibles. Unearthing and hauling two dozen trailer footings the size of small dishwashers was easier than I thought. Too heavy to lift but I could cradle them between the bucket and blade and track them to a pile. Issues: I've added latched for ease of access on the back panel as well as an electric cooling fan (external pulling as mine also has the internal shroud that doesn't leave room for it in the engine bay). Also, I've developed a fuel leak under the fuel tank which I need to determine if the fitting seal is bad or the line connecting to the fitting needs tightened down, hopefully its just the latter. Questions: Do you know the hydraulic oil filter part number or equivalent? Is your model's engine oil drain plug not accessible? Comments: Thanks for showing how fitted the oil temp sensor as I was unsure where/how to best mount mine. Increase coolness factor by pulling all those safety decals on the body and some fun ones. I'm quite certain the skulls on mine has increased its lifting power by twofold. I'm excited to see a video on the ripper claw when that time comes as I have lots of stump work in the future and I may follow suit. In closing: The telescopic tracks would be a great upgrade. I'd say sell your model, replace with another gas model with the foot pedals, boom swing and telescopic tracks so we may vicariously enjoy those upgrades too. Keep at it, see you in the next ones. PS - I'm going to take a look at the zerkless thumb pin on my model and see if its the same as yours or if they improved on that oddly overlooked joint. Will provide an update if it is in fact accounted for in my model.
Not in the market for an excavator, but love watching you modify these machines to suit your purposes! Great to see honest reviews of a multitude of products (welders, dirt bikes, saw mills, etc)!
I don't like my thumb non greased pivot either. Took my pivot bolt out, drilled a hole 3/4 of the way thru the bolt from the head. Then cross drill for the grease to make access to the existing tubing. I countersink for the grease fitting keeping it out of the dirt. I also ground a 1/4 way around the pin from the cross holes to help spread the grease without losing any of the pin strength.
I have a Chinese Mini Excavator and it came with a Yanmar 3TN, 3 cylinder diesel. Love it. Can run on low revs, uses minimum fuel and has plenty of power. Those companies not using the Yanmar 3TN may use the D722 Kubota. Nay sayers believe they are a Chinese made copy but they are proper Japanese made engines. No problems with engine parts as there are a lot of options for getting Yanmar and Kubota bits. Cheers Dave
Right on! I think you will really enjoy it, they can move fairly smooth with the hydraulic movements once you get some hours on the seat. 😊 what make and model did you decide on?
I got the ripper and 32" tilt bucket from kazana as well and I will say I am glad I didnt go any bigger on the bucket. I think 32" tilt is about the biggest you should go on these just based on weight alone. You will learn real quick that you have to be even more gentle with the controls with all that weight out there. After I put mine on I decided to put on a considerable amount of counterweight as these machines are ~600lbs front heavy anyway and even more so with that large articulated bucket. Most add 200ish lbs but with the thick bracket and weights I added its about 340lbs of weight off the rear of the house.
Hey Mike, I have a 25 hp diesel Chinese one. Kubota and over 100 hours on it. So far no problems with it. I had the works on mine when ordered it. If I did it again I would do things differently. I keep my tracks extended so I would get the wider tracks but not adjustable. Two speed I never use just can’t around the hills anyway so I would not get that. Had hydraulic quick change adapter. But kept breaking hoses when digging and stuff so changed it to a manual quick connect. Much better. Boom swing I don’t really use so I probably wouldn’t get that in the future it just seems to make everything feel sloppy even. Those are my thoughts
Thanks for sharing your thoughts on your mini 👍 I do really appreciate it. I have a swing boom on my Yanmar and it’s also a little sloppy, I just figured it was because it’s a 30 year old machine with 3000 hours, but maybe slop is the nature of a swing boom? Definitely appreciate your thoughts on this subject. Thanks Steve 😊
You have hit the sweet spot with this brand and model. Your usage and operator demand is meeting your needs. I'd say no to the diesel and yes to the one that widens.
Hi Mike, I think you should buy the new version with the Kubota engine. I'm sure you'll have no problem fixing and maintaining this diesel. It's a piece of cake for you, and besides, we could have some cool videos with the new excavator. Like cmon, you can build your own 6x6 ATV, but you're afraid of a simple diesel engine. Greetings from Poland, I'm very jealous of your plot of land, and American freedom. I dream of a house in the woods like yours and no neighbors nearby.
Hey Mike. I’ve been eyeing the Rippa based on your reviews. The diesel models are intriguing but I’m unsure it’s necessary for my needs. I’m not looking to move mountains just want to make some jobs easier around my property. Thanks for all the great content!
Because of health issues, that’s your story and your sticking with it. 😀 The market is getting flooded with mini excavators. Their bringing half of retail at some auctions. My AGT H15 cost $3500 +fee+tax. They went for $2750 - $3750, the $3750 had A/C. On my H15 I put latches on the rear cover, float charger pig tail, fan is on order, hyd. thumb, oil drain hose. I don’t like the hour meter wired to the master switch. I may do what you did. H15 has pilot controls with on/off switch for getting off with engine running, 2 pumps. So far I’m happy, but their for the person who likes to tinker. I always enjoy your videos.
I appreciate your full honest reviews. I hate that when I see them, they make me want to buy the same piece of equipment! I am on the fence about buying one of these. I am 60 now and don’t need to be lifting the things that I do lift but the cost is hard to justify with the limited time that I have to use it. However, boy do I want one of these! I am interested to see your root rake attachment to see if it’s really what I think it is.
Where I'm from (not North America) we're using these apps for renting out pretty much any kind of item you own that others might need. Camping equipment, portable speakers, tools, cars, trailers are some popular examples. If you have anything like that in your area you might want to test out the rental market for excavators before you consider selling it and ordering the expandable track model. I don't know what sort of area you live in but there could potentially be money in keeping the one you have AND getting another.
With my aging back (67yo) I had to pick up a 1.5 ton mini Chinese excavator with pilot controls so I don’t need to bend forward as much. Have some more modding to do, like bringing the drive controls closer to my lap. And make the blade foot controlled . Had to buy a elect gas pump ,can’t lift my 5 gallon can that high. Added a 12v temp gauge. This 1.5 ton has boom swing, hardly ever use it. Just adds more hydraulic lines to worry about. Also added a cigarette lighter, just in case. Bought a back up camera ,works but haven’t installed it and it’s magnet mounted. I never run full throttle I set to where the hydraulics function as they should , to where my eng does not shut down under a load. I have a 1 ton at another property but there is more of a difference then / than I thought there would be. Have had both for 4 years ish. Have fun, be safe.
That's a really handy looking tool for anyone on a small holding. Great to hear so many positive remarks - yes definitely cheaper than a new set of spinal discs.
I'd love to see a wide to narrow, narrow to wide track machine. I like Kubota diesels, so I'd absolutely say yes to that, but you have to satisfy your budget on that one. I really appreciate your videos on this little excavator because I've been considering getting one and this series helps me to be better informed.
I'd suggest gas, but you have the mechanical chops to deal with diesel so that's up to you, but considering the fuel efficiency of diesel versus gas, it's going to be up to your tolerance of dealing with the complexity. Thanks for this review. I'll know where to look if I want some equipment that's mini and durable, and I am an experienced heavy equpment operator so it would be fun to have one of those.
I like you simplicity idea. If you are getting good fuel economy and it is doing the job why go with the Diesel? Looking forward to seeing your root ripper. Great video Mike. Thank you again!
Great video! My top things to check when you get one of these (any Chinese micro/mini ex). 1 Look in the gas tank. Mine had fine iron/steel dust in the gas. I have read others have had this experience. Can clean out with a stick magnet. 2 Check the hydraulic oil for debris. You most likely will need to drain it to do this. If it come out perfect, you may be fine, however, I strongly suggest removing the access cover to the tank and looking inside. My tank had larger debris that could have been shaving from tapping/installing the through bolts for the tank temp gauged and possibly welding slag from tank fab. 3 While you are in the tank, make sure that the hydraulic oil strainer is tight. Most machines have one at least on the suction side. These are a straight thread (not pipe thread) and can easily vibrate loose. I used a rubber o-right to add pressure on the the threads so it wouldn't loosen. (could use other methods, but it is nice to be able to get of off by hand if need, just like a spin-on oil filter. Not much room for tools in the tank.) Even if your machine has a spin-on hydraulic return filter, there could be some gnarly stuff going through the system (at least once) if the strainer falls off.
Hi Mike, I know what you're saying about making things a little easier for yourself. I'm 58 and that's why I'm looking to get one of these for around my home. I'm finding the recovery time on my body is getting longer and longer after lifting and moving heavy things around my property, never mind digging. I hope you stick with the gas powered units as that's what i think most of us home owners will be purchasing, after all these aren't really meant for commercial use. As always thanks for the informative video
I couldn’t just the diesel model. I would like a larger capacity machine but power has never been an issue. I feel like a 2 ton machine with the same motor would work just fine
Mike a good review like the channel,an angle boom and adjustable track are a must and if possible on the chosen model an angle blade can be very handy for back filling a trench and grading
Man, you're really making me want to get one of these. I've been looking at the larger18-20 diesel models. Price seems pretty good in comparison to used Kubotas and other machines. I just bought a pretty expensive smaller Kubota tractor for our recently purchased Oregon property and am loving that thin, but I dont want to shell out the dough for a higher end unit. Thanks for making these videos. I've been watching your channel for a very long time.
Hey Mike always good to hear your input! I need this machine im doing a ton of digging here in the Ozarks its mostly rock/clay, pick and shovel, its killin my 63 YO back and hips. Id like to see you sell that unit and go to expanding track then fab up a bar and pin system, IDK about the diesel there's a whole lot of benefit to throwing in an HF motor. Thank for the excellent review.
Great vid Mike! I would skip the diesel just because the gas is way easier and cheaper to get parts and being such a small unit, the gas engine will do fine with that size of machine IMO. I watched this vid a while back on my tv but could not comment until now lol. Either way you go good luck!
I definitely agree with you about the simplicity of the gas engine in a mini of this size. If it ever goes bad, HF sells a 420cc that will bolt right up for $350, can’t beat that 😊 Thanks for checking out my mini Excavator video!
Great review Mike! If you buy another, a diesel would be my recommendation. Diesel fuel can be stored for years. Gasoline...not so much. Ethanol-free gas is available in my area for a premium price but it still won't store well, months...not years. If it is a Kubota diesel, to me it's a no-brainer. Again, my opinion....
I got a 3 cylinder diesel which you can get parts for it anywhere and cheep. I ordered mine and with cab AC and heat for 7k and getting it shipped like an 1hr from me in Pittsburgh pa. Don't get the single diesel engine is much louder unless you do a bit of sound damping. And you definitely wanna get pilot controls and ask them to change it to backhoe control style is amazing for working. Also best to grease the swing gear when spinning to get grease everywhere not just one spot and poring out in one spot
Thank you Mike ❤ These videos could not be better timed. We’ve been back and forward about buying a digger for two years, had one at our last home but getting help with maintenance was always a problem. We aren’t very mechanical (I really want to learn, love all the mods you make and suggest) but we live in a farming area and there are people who repair tractors in our village, and in the next town, so I imagine they can do most things on such a simple machine 🤞We would get the diesel, so of course would love to see you pick one up and review it so throughly. We are going to see a Rippa today and now we know exactly what to look for and what questions to ask. I think getting extra attachments might be tricky or more expensive, we’re in SE Europe, and things just aren’t as easily available if they aren’t already here. But the seller of the machine is an importer so we will be asking what they can get and how long it takes. Also it is regularly hitting 35-40°C (90s F) for these summer months, and our tractor doesn’t like it, so I guess this won’t either. But we can just work mornings and evenings 🤷🏻♀️Ultimately I worked out as you did, this machine could pay us back in about 80 days based on local self hire costs, that doesn’t even include drop off and delivery charges, so once we’ve done the work we need over the winter it will have paid for itself - anything extra is a bonus. Plus it’s small enough we can put it in my van 😂and take it to help friends and neighbours. Thanks again Mike, your videos are priceless 🙌
Mike, another terrifically clear and honest review. thank you. Excellent solution for your property. Keep safe and enjoy every minute outdoors working the land. 👍👍😎👍👍 In my opinion, only you can determine if the expanding track excavator upgrade will fill the void that your current model lacks. I would think the Yanmar would step up when you need that wider track? As you say..... keep it simple. Just stay safe and don't overextend the capabilities of the little guy.
Awesome, so glad you did the update video. I'm hopefully receiving my rippa this week. Any chance you know a part number for that hydraulic oil filter?
You seem to be getting attached to your machine, but I'd say go for it. If it's a friend you can always buy it back later as a fixer-upper for some nostalgia down the road. Just remember to get what you actually need. An auger would be kinda pointless for me personally, already got an old homemade thingy that fits on my 3-point and that thing cost me 50, digs pole holes like you wouldn't believe. It's not designed like an ice drill, it's more like a double edged dagger with scooped edges spinning into the ground. Ripper claw though, that is indeed one of the things I ordered. That and a rake for clearing topsoil. Quick attach I felt was a bit iffy with the thumb getting out of reach for the bucket and people have been complaining about the bolt eventually snapping off.
Nice review. I have a QH12 and I'm currently converting to a hydraulic thumb. Your video shows how helpful that should be. I have a 24" tilt grading bucket and a ripper. They are both really handy. I just got a mini skid steer this summer and love it. You might find one handy too.
Thanks for taking the time to provide some really useful information. I look forward to seeing how it handles the various attachments. As for your Diesel/ Gas decision, I have never been able to justify the increased purchase and running costs on a Diesel unless working it full time commercially. It doesn't make economic sense for a property owner in my opinion. But hey, it's your toy.
Great video on your mini ex. Personally, I would stay with the gas engine for the simplicity reasons you mentioned. I'd only get a diesel engine if I was stepping up to electric over hydraulic controls with a multi pump.
Thanks for sharing another great video! I would never have thought that a petrol engine would be the more reliable choice compared to a diesel engine. But I guess this is the power range where the table turns. :)
I own four diesel machines, and I love diesel engines for my tractors and skid steer. you buy whatever suits your desires and needs and then make a video. I have had no problem with parts or supplies for these machines, knock on wood. cheers and keep up the good videos.
I vote get another gas model, but if possible, larger engine. Least then if you got a different pump, you have a large enough engine to not be bogged down.
I'm a diesel guy or, at least, I used to be. With all the smog control crap they put on newer machines these days, you have to buy DEF and wait for the engine to go through regen modes and a bunch of other stuff. Maintenance costs can be higher and they can also be harder to start in the winter. I'd stick with the gas engine, imho. As to the thumb hinge pin: Could you take the pin to a machine shop and have them drill horizontally through it and then 2 strategically placed holes crosswise? Screw in a grease fitting and have at it.
I bought from this company because of your original video, I got the one with the diesel. I really like the diesel model because it is quiet, the only downside is the fuel tank is really small. i get about 2 hours run time before I have to refuel. i am going to be putting in a larger tank
Good to hear you have been happy with your mini so far! Yeah a bigger fuel tank sounds like it’s in order, especially being a diesel, a little harder to prime when ran out of fuel. How many hours do you have on yours now?
Nice reviews on this machine. I’m currently looking into them a bit more for remodeling business-digging egress window wells etc on my timeline. What’s the digging depth of this particular model? On their site is says 4.9ft. Is that accurate? It seems like at least the telescopic track is a must for stability.
I gotta say Mike that the simplicity of the Briggs motor is a seller for me... it's convenient..I'm purchasing a mini and the expandable tracks are my thoughts too...thanks for the video and info
Thanks man! I really appreciate it 😊 I’m definitely looking forward to see your next video on the old mini Excavator project you have been working on 😊👍
Nicely done on the review Michael. As for your idea of selling it and obtaining another model with a diesel engine, I am torn on that issue, I would love to see how the diesel machine performs with the additional options so I vote yes on going that route. But... I kind of also want to see how this machine performs in the longer term. Since you would be selling to a friend, my guess is we could also maybe see the longer term performance of this one through your keeping in touch with him and doing video updates on how he is doing with it? Either way though, it is whatever works best for you, we (all us viewers) win either way! Seems as well that you could sell your bucket mod pieces as a kit to reinforce the skimpy ones that are out there so maybe think about offering it via an online store? Thanks for your time bringing us along on all that you do, be well.../B
Hello Mike, thanks for a great video. I’d love to have one of these, but I just don’t have enough work for it. You asked about fuel choices…. I personally would enjoy seeing how the diesel works out for you, especially compared to the current gasser. That said unless you really want to go bigger I wouldn’t bother trying to swap it out. I just think that you’ve done a lot to get this thing where it is. If you buy a new one you’ll have to reinforce the bucket again, and other such things you’ve already done on this machine. Clear as mud? Anyhow, thanks again.
I like that little skid steer. I could use one to go with my new Groundhog 1 Ton excavator on my property in Northern Ca. Looks like you found another good dealer in Texas. I had good service with Ground Hog of Texas. bought it as soon as they unloaded it off the truck and it was trucked to California a few days later .
Mike, I'm probably never going to tell you to not buy another tool, especially if you the opportunity to get your money out of your current tool. That said, I think the expandable track and swing boom would have value for you. Just bear in mind all the extra hydro fittings and connections that adds. As to gas vs diesel: captain's choice. Personally, I prefer diesel for equipment but for light duty, the ease of repair of gas engines makes a lot of sense too.
I’d like to see your take on the diesel model. You could compare and contrast between the gas and diesel and not many can probably say the same. Diesel is nice, a lot of guys likely have a diesel tractor at home, and a diesel pickup, so naturally diesel in this so everything is on same fuel.
Hey Mike. I cant send a link or photo because of restrictions but Harbor Freight has a d cell battery operated transfer pump that goes into the mouth of your gas jug and transfers the gas to your machine. I have had tow to fill my Ultralight aircraft. awesome and fast. make refueling that easier. $10
I got a 2024 with enclosed cab from the same source. I ordered it on Ebay and added the rake attachment. Shipping was free and final cost was the same as what Mike paid for his. I think the cab models don't sell as well, might be why it was a good deal. Don't know. It also has the RATO engine, not the B&S. Research I did says the RATO engines are available at Harbor Freight. I'm 6'7" and was concerned if I'd fit in the cab. Pleasantly surprised, it's quite roomy. I modified the cowling to swing open. Added a fan to pull air out of the engine compartment using the existing switch installed for the track spread, which mine doesn't have. Added a simple tach/hour meter. Also, extended the walking sticks to help have a bit less Jerry control. I've found to avoid Jerry hydraulics just move slowly. Shipping took about 6 weeks. But, the company was great about keeping me informed and once the machine got to the States it was to me in 3 days. No regrets here.
I've got a machine getting picked up from them and shipped out to me on Monday. How far from Texas are you that it took three days? Just trying to gauge my expectations!
Mine came with pedals fir thumb and blade. I like those. The one thing it doesn't have is a hydraulic fluid temp Guage. It has a round bubble type Guage. Not as useful, imo, as the type I've seen with the thermometer in them. But, oh well.
Get the Diesel. I have a 30yr old Kubota tractor with the exact 3 cyl engine most of those mini excavators come with. It is not expensive for maintenance and I have never had to do anything other than routine maintenance. Parts are EASY to source, there are zillions of small Kubota and Yanmar diesels out there. People saying diesels are expensive to maintain must be thinking of big semi truck engines. Diesels are quieter, produce more torque at lower rpms, last longer, and sip fuel. You can even buy off road use diesel that doesn't have any of the road use taxes added.
Hi Mike. Really like your videos. I think you should go with the diesel model. Assuming of course the cost is not outrageous. Love to have one of these mini ex’s around my property but my Kubota BX will have to do for now.
i'm in wash also. did septic work. risered tanks and such. loved living in place where almost half the houses are on septic. good money . retired now. westport area.
Both of my machines (excavators) are running on diesel. I wouldn't have it any other way. Very smooth and powerful even down to the low rpms. Never had an issue that couldn't be dealt with easily and the small one uses a 3 cylinder Kubota diesel engine. The small one is what is called a 2 tonne Chinese model. It has the red arrow on the side of the track frame like yours. 4 post sun shade is certainly better than a 2 post. Mine has the expandable tracks for width but I have only used it in the widest setting and never had a need for it to be narrower. Just makes it feel more stable. I have removed the door off of the back which accesses the oil and other engine accessories but I did this because the fan really drove the air right to the centre of the door and it made sense to help the cooling in the 100 degree weather we have been having a lot of in the Okanogan here. The hydraulic oil fill and diesel fill is on the right side (of you sitting) and has see thru fill gauges you can easily see. Hydraulic thumb was standard and there is plumbing for accessories like a breaker or auger if you like. I got this mainly for orchard work because we would plant trees with an auger but when hitting any kind of rock, which we have plenty of, the auger would deflect causing the tree hole to be off. With the bucket on the excavator this doesn't happen. Just dig out the rock. They are an absolutely indispensable machine for almost any purpose.
Fell in love with the mini off road truck video. However, this excavator content is amazing. As far as gas or diesel goes, if you have the money to replace it or skills to DIY go diesel. Otherwise, if you are poor like me, gas it!
Stay with the petrol,it does what it says on the tin.. If you go diesel with all the add ons.swivel boom, expanding tracks etc you may as well spend the money modifying your yanmar
I'm considering buying a Chinese mini-ex. I build decks and do small carpentry projects for a living, and I don't need a large machine, I just need something to replace my shovel. I work by myself and I'm very much over digging holes. Not to mention buying one of these machines will take the place of a worker. Worker's comp, taxes, and liability insurance isn't cheap and possibly replacing a worker will pay for this machine many times over.
As long as you take care of it and do basic maintenance I think a Chinese mini would work well for your work. Yes it’s definitely like having extra help, definitely a game changer for sure. 👍
Although selling this one and buying another might be good for the added content you will be able to produce, I don't really see any other advantage. If you really need the wider track, you have your bigger machine. This one fits all your needs for a small excavater, so why change? My suggestion is to keep this one, use your new attachments and tell us about it. Run it till it dies is my motto. The longer it runs, the less it costs, and when it is completely shot,, you can still make a buck scrapping it.
Hey Mike, just got the brand new version today, diesel and all. Still sitting on the trailer so I've gotta figure out how to get it off of there safely lol. If you have any questions whatsoever regarding this new version, hit me up. Took 4 months from start to finish but I'd say it was worth it.
Well damn Mike, every time you post a new video I have to buy another piece of equipment..lol. Looks like a super useful machine, and I would stick with the gas motor. Thanks for the upload, love the content..:)
i owned a b12 yan. my brother over heated it.and took out the middle rings we will not go into how it all happened. any way. it took only a weekend to re build it. three cylinder diesel are nice. not bad on fuel. had to put my own thumb on. really like that size.rented anything bigger.
To me it sounds like your yanmar is a little too big for your needs since you’re not running that much and the rippa is a little small since you’ve already found the limit of the original bucket. I think it’d be worth while to sell both and buy something that is in between the two size wise. That way it’s a little stronger and more powerful but you can still get into the tighter areas
Theres a channel called "Our life in trees" and the guy bought a mini Chinese skidsteer with attachments and he does a detailed testing of the machine, the build quality is fantastic and over built.
Doesn't use enough fuel to justify going diesel at all if it's harder to work on (better not have to pull engine for anything). I would check it out in person for quite a while. Also, what about adding some tractor weights to the back for more lifting capacity/stability (sorry, we've seen you're an excellent fabricator lol)? I'm sure 500 lbs would go a long way and add fairly minimal length.
Hey Mike. As for the rather basic design of the thumb mount on your Rippa machine, I suspect the manufacturer originally intended for it to have a manual/fixed thumb so rotational wear would not have been a big deal. I agree that the pivot will likely be an area of concern for you with regular use of the movable hydraulic thumb. An upgrade will make good content though.
Thanks for the review.
I think you are right about the manual thumb, there would be far less movement. I didn’t even think of that being a possibility for the design. Thanks for checking out my video Doug. Ps anyone reading this, go check out Doug’s channel, he has a much bigger Rippa excavator he bought at auction. Go check out his experience with his machine 👍
@@Mikefestiva Big thanks for the shoutout Mike. I am editing a video of my clumsy climb of the learning curve right now.
This is the kind of honest review you need when looking into some tools, equipment etc. No fake bullsh*t, no fake reviews. An honest review after some honest labour / jobs done. I hope these guys realise the worth of it.
I was one of the hobbyists lucky enough to get the 1 ton Rippa model w/ the foot pedals and easier access fuel tank w/ gage. I also got the cab which out to work well since I don't yet have a pole barn and live in the Midwest with plenty of snow. At 15 hours, mine has saved me blood, sweat, tears and most importantly medical insurance deductibles. Unearthing and hauling two dozen trailer footings the size of small dishwashers was easier than I thought. Too heavy to lift but I could cradle them between the bucket and blade and track them to a pile.
Issues: I've added latched for ease of access on the back panel as well as an electric cooling fan (external pulling as mine also has the internal shroud that doesn't leave room for it in the engine bay). Also, I've developed a fuel leak under the fuel tank which I need to determine if the fitting seal is bad or the line connecting to the fitting needs tightened down, hopefully its just the latter.
Questions: Do you know the hydraulic oil filter part number or equivalent? Is your model's engine oil drain plug not accessible?
Comments: Thanks for showing how fitted the oil temp sensor as I was unsure where/how to best mount mine. Increase coolness factor by pulling all those safety decals on the body and some fun ones. I'm quite certain the skulls on mine has increased its lifting power by twofold. I'm excited to see a video on the ripper claw when that time comes as I have lots of stump work in the future and I may follow suit.
In closing: The telescopic tracks would be a great upgrade. I'd say sell your model, replace with another gas model with the foot pedals, boom swing and telescopic tracks so we may vicariously enjoy those upgrades too.
Keep at it, see you in the next ones.
PS - I'm going to take a look at the zerkless thumb pin on my model and see if its the same as yours or if they improved on that oddly overlooked joint. Will provide an update if it is in fact accounted for in my model.
Not in the market for an excavator, but love watching you modify these machines to suit your purposes! Great to see honest reviews of a multitude of products (welders, dirt bikes, saw mills, etc)!
27:19 Bigfoot sighting center of screen! Super cool review video, these machines have a ton of value for the money.
I don't like my thumb non greased pivot either. Took my pivot bolt out, drilled a hole 3/4 of the way thru the bolt from the head. Then cross drill for the grease to make access to the existing tubing. I countersink for the grease fitting keeping it out of the dirt. I also ground a 1/4 way around the pin from the cross holes to help spread the grease without losing any of the pin strength.
Another great video. Thanks for the honest review. Seems like a good small machine. Great bucket fix also
Thanks for the video Mike ! Excellent and thorough review !
I have a Chinese Mini Excavator and it came with a Yanmar 3TN, 3 cylinder diesel. Love it. Can run on low revs, uses minimum fuel and has plenty of power. Those companies not using the Yanmar 3TN may use the D722 Kubota. Nay sayers believe they are a Chinese made copy but they are proper Japanese made engines. No problems with engine parts as there are a lot of options for getting Yanmar and Kubota bits. Cheers Dave
I just got a mini excavator and I cant wait for it to get here. Thanks for all the great and family friendly content!
Right on! I think you will really enjoy it, they can move fairly smooth with the hydraulic movements once you get some hours on the seat. 😊 what make and model did you decide on?
I got the ripper and 32" tilt bucket from kazana as well and I will say I am glad I didnt go any bigger on the bucket. I think 32" tilt is about the biggest you should go on these just based on weight alone. You will learn real quick that you have to be even more gentle with the controls with all that weight out there. After I put mine on I decided to put on a considerable amount of counterweight as these machines are ~600lbs front heavy anyway and even more so with that large articulated bucket. Most add 200ish lbs but with the thick bracket and weights I added its about 340lbs of weight off the rear of the house.
Hey Mike, I have a 25 hp diesel Chinese one. Kubota and over 100 hours on it. So far no problems with it. I had the works on mine when ordered it. If I did it again I would do things differently. I keep my tracks extended so I would get the wider tracks but not adjustable. Two speed I never use just can’t around the hills anyway so I would not get that. Had hydraulic quick change adapter. But kept breaking hoses when digging and stuff so changed it to a manual quick connect. Much better. Boom swing I don’t really use so I probably wouldn’t get that in the future it just seems to make everything feel sloppy even. Those are my thoughts
Thanks for sharing your thoughts on your mini 👍 I do really appreciate it. I have a swing boom on my Yanmar and it’s also a little sloppy, I just figured it was because it’s a 30 year old machine with 3000 hours, but maybe slop is the nature of a swing boom?
Definitely appreciate your thoughts on this subject. Thanks Steve 😊
You have hit the sweet spot with this brand and model. Your usage and operator demand is meeting your needs. I'd say no to the diesel and yes to the one that widens.
Hi Mike, I think you should buy the new version with the Kubota engine. I'm sure you'll have no problem fixing and maintaining this diesel. It's a piece of cake for you, and besides, we could have some cool videos with the new excavator. Like cmon, you can build your own 6x6 ATV, but you're afraid of a simple diesel engine. Greetings from Poland, I'm very jealous of your plot of land, and American freedom. I dream of a house in the woods like yours and no neighbors nearby.
Hey Mike. I’ve been eyeing the Rippa based on your reviews. The diesel models are intriguing but I’m unsure it’s necessary for my needs. I’m not looking to move mountains just want to make some jobs easier around my property. Thanks for all the great content!
Because of health issues, that’s your story and your sticking with it. 😀
The market is getting flooded with mini excavators.
Their bringing half of retail at some auctions.
My AGT H15 cost $3500 +fee+tax.
They went for $2750 - $3750, the $3750 had A/C.
On my H15 I put latches on the rear cover, float charger pig tail, fan is on order, hyd. thumb, oil drain hose.
I don’t like the hour meter wired to the master switch.
I may do what you did.
H15 has pilot controls with on/off switch for getting off with engine running, 2 pumps.
So far I’m happy, but their for the person who likes to tinker.
I always enjoy your videos.
I appreciate your full honest reviews. I hate that when I see them, they make me want to buy the same piece of equipment! I am on the fence about buying one of these. I am 60 now and don’t need to be lifting the things that I do lift but the cost is hard to justify with the limited time that I have to use it. However, boy do I want one of these! I am interested to see your root rake attachment to see if it’s really what I think it is.
Where I'm from (not North America) we're using these apps for renting out pretty much any kind of item you own that others might need. Camping equipment, portable speakers, tools, cars, trailers are some popular examples. If you have anything like that in your area you might want to test out the rental market for excavators before you consider selling it and ordering the expandable track model. I don't know what sort of area you live in but there could potentially be money in keeping the one you have AND getting another.
With my aging back (67yo) I had to pick up a 1.5 ton mini Chinese excavator with pilot controls so I don’t need to bend forward as much. Have some more modding to do, like bringing the drive controls closer to my lap. And make the blade foot controlled . Had to buy a elect gas pump ,can’t lift my 5 gallon can that high. Added a 12v temp gauge. This 1.5 ton has boom swing, hardly ever use it. Just adds more hydraulic lines to worry about. Also added a cigarette lighter, just in case. Bought a back up camera ,works but haven’t installed it and it’s magnet mounted. I never run full throttle I set to where the hydraulics function as they should , to where my eng does not shut down under a load. I have a 1 ton at another property but there is more of a difference then / than I thought there would be. Have had both for 4 years ish. Have fun, be safe.
That's a really handy looking tool for anyone on a small holding. Great to hear so many positive remarks - yes definitely cheaper than a new set of spinal discs.
I agree...save your body. Im 52 and hit a wall around 46 where i just cannot do crazy stuff no more.
Great feedback but I would not go for the diesel engine...costs too much for maintenance even with the longer MTBF.
That is a lot of machine for the money as long as you understand its limitations. Definitely beats hernia or back surgery! Great review!
I'd love to see a wide to narrow, narrow to wide track machine. I like Kubota diesels, so I'd absolutely say yes to that, but you have to satisfy your budget on that one. I really appreciate your videos on this little excavator because I've been considering getting one and this series helps me to be better informed.
I'd suggest gas, but you have the mechanical chops to deal with diesel so that's up to you, but considering the fuel efficiency of diesel versus gas, it's going to be up to your tolerance of dealing with the complexity. Thanks for this review. I'll know where to look if I want some equipment that's mini and durable, and I am an experienced heavy equpment operator so it would be fun to have one of those.
I like you simplicity idea. If you are getting good fuel economy and it is doing the job why go with the Diesel? Looking forward to seeing your root ripper. Great video Mike. Thank you again!
Great video! My top things to check when you get one of these (any Chinese micro/mini ex).
1 Look in the gas tank. Mine had fine iron/steel dust in the gas. I have read others have had this experience. Can clean out with a stick magnet.
2 Check the hydraulic oil for debris. You most likely will need to drain it to do this. If it come out perfect, you may be fine, however, I strongly suggest removing the access cover to the tank and looking inside. My tank had larger debris that could have been shaving from tapping/installing the through bolts for the tank temp gauged and possibly welding slag from tank fab.
3 While you are in the tank, make sure that the hydraulic oil strainer is tight. Most machines have one at least on the suction side. These are a straight thread (not pipe thread) and can easily vibrate loose. I used a rubber o-right to add pressure on the the threads so it wouldn't loosen. (could use other methods, but it is nice to be able to get of off by hand if need, just like a spin-on oil filter. Not much room for tools in the tank.)
Even if your machine has a spin-on hydraulic return filter, there could be some gnarly stuff going through the system (at least once) if the strainer falls off.
Hi Mike, I know what you're saying about making things a little easier for yourself. I'm 58 and that's why I'm looking to get one of these for around my home. I'm finding the recovery time on my body is getting longer and longer after lifting and moving heavy things around my property, never mind digging. I hope you stick with the gas powered units as that's what i think most of us home owners will be purchasing, after all these aren't really meant for commercial use. As always thanks for the informative video
I couldn’t just the diesel model. I would like a larger capacity machine but power has never been an issue. I feel like a 2 ton machine with the same motor would work just fine
Mike a good review like the channel,an angle boom and adjustable track are a must and if possible on the chosen model an angle blade can be very handy for back filling a trench and grading
Man, you're really making me want to get one of these. I've been looking at the larger18-20 diesel models. Price seems pretty good in comparison to used Kubotas and other machines. I just bought a pretty expensive smaller Kubota tractor for our recently purchased Oregon property and am loving that thin, but I dont want to shell out the dough for a higher end unit. Thanks for making these videos. I've been watching your channel for a very long time.
Hey Mike always good to hear your input! I need this machine im doing a ton of digging here in the Ozarks its mostly rock/clay, pick and shovel, its killin my 63 YO back and hips. Id like to see you sell that unit and go to expanding track then fab up a bar and pin system, IDK about the diesel there's a whole lot of benefit to throwing in an HF motor. Thank for the excellent review.
I really need to get one of these. Thanks for the update!
Thanks for checking out my new video! I will keep some updates coming on this machine as hours increase 😊👍
Great vid Mike! I would skip the diesel just because the gas is way easier and cheaper to get parts and being such a small unit, the gas engine will do fine with that size of machine IMO. I watched this vid a while back on my tv but could not comment until now lol. Either way you go good luck!
I definitely agree with you about the simplicity of the gas engine in a mini of this size. If it ever goes bad, HF sells a 420cc that will bolt right up for $350, can’t beat that 😊
Thanks for checking out my mini Excavator video!
Great review Mike! If you buy another, a diesel would be my recommendation. Diesel fuel can be stored for years. Gasoline...not so much. Ethanol-free gas is available in my area for a premium price but it still won't store well, months...not years. If it is a Kubota diesel, to me it's a no-brainer. Again, my opinion....
I got a 3 cylinder diesel which you can get parts for it anywhere and cheep. I ordered mine and with cab AC and heat for 7k and getting it shipped like an 1hr from me in Pittsburgh pa. Don't get the single diesel engine is much louder unless you do a bit of sound damping. And you definitely wanna get pilot controls and ask them to change it to backhoe control style is amazing for working. Also best to grease the swing gear when spinning to get grease everywhere not just one spot and poring out in one spot
very thorough review of this machine thanks for taking the time and explaining the pros and cons of this little machine Thanks
Thank you Mike ❤ These videos could not be better timed. We’ve been back and forward about buying a digger for two years, had one at our last home but getting help with maintenance was always a problem. We aren’t very mechanical (I really want to learn, love all the mods you make and suggest) but we live in a farming area and there are people who repair tractors in our village, and in the next town, so I imagine they can do most things on such a simple machine 🤞We would get the diesel, so of course would love to see you pick one up and review it so throughly. We are going to see a Rippa today and now we know exactly what to look for and what questions to ask. I think getting extra attachments might be tricky or more expensive, we’re in SE Europe, and things just aren’t as easily available if they aren’t already here. But the seller of the machine is an importer so we will be asking what they can get and how long it takes. Also it is regularly hitting 35-40°C (90s F) for these summer months, and our tractor doesn’t like it, so I guess this won’t either. But we can just work mornings and evenings 🤷🏻♀️Ultimately I worked out as you did, this machine could pay us back in about 80 days based on local self hire costs, that doesn’t even include drop off and delivery charges, so once we’ve done the work we need over the winter it will have paid for itself - anything extra is a bonus. Plus it’s small enough we can put it in my van 😂and take it to help friends and neighbours. Thanks again Mike, your videos are priceless 🙌
Mike, another terrifically clear and honest review. thank you. Excellent solution for your property. Keep safe and enjoy every minute outdoors working the land. 👍👍😎👍👍
In my opinion, only you can determine if the expanding track excavator upgrade will fill the void that your current model lacks. I would think the Yanmar would step up when you need that wider track? As you say..... keep it simple. Just stay safe and don't overextend the capabilities of the little guy.
Love all your reviews on the mini Mike. Appreciate your efforts!
Glad you like them! Thanks 😊👍
Awesome, so glad you did the update video. I'm hopefully receiving my rippa this week. Any chance you know a part number for that hydraulic oil filter?
I love my shty little digger.
I think the expanable track model actualy only narrows tracks for getting thru gates. My fixed track width is 39".
This would be good for digging foundations for waterproofing basements.
Expanding tracks would be nice but i like the simplicity of that thing
Mike the Rippa would really be handy for trail work .I hope you are riding the mini bike .Happy trails !
You seem to be getting attached to your machine, but I'd say go for it. If it's a friend you can always buy it back later as a fixer-upper for some nostalgia down the road. Just remember to get what you actually need. An auger would be kinda pointless for me personally, already got an old homemade thingy that fits on my 3-point and that thing cost me 50, digs pole holes like you wouldn't believe. It's not designed like an ice drill, it's more like a double edged dagger with scooped edges spinning into the ground. Ripper claw though, that is indeed one of the things I ordered. That and a rake for clearing topsoil. Quick attach I felt was a bit iffy with the thumb getting out of reach for the bucket and people have been complaining about the bolt eventually snapping off.
Nice review. I have a QH12 and I'm currently converting to a hydraulic thumb. Your video shows how helpful that should be. I have a 24" tilt grading bucket and a ripper. They are both really handy. I just got a mini skid steer this summer and love it. You might find one handy too.
Good points on gas vs. diesel. Hard call but gas seems to be quicker for parts if doing side work. Adding a snow plow attachment would be sweet.
Thanks for taking the time to provide some really useful information. I look forward to seeing how it handles the various attachments. As for your Diesel/ Gas decision, I have never been able to justify the increased purchase and running costs on a Diesel unless working it full time commercially. It doesn't make economic sense for a property owner in my opinion. But hey, it's your toy.
Diesel is nice because the fuel doesn't degrade as rapidly and most tractors are diesel so you don't need to store 2 fuels.
Great video on your mini ex. Personally, I would stay with the gas engine for the simplicity reasons you mentioned. I'd only get a diesel engine if I was stepping up to electric over hydraulic controls with a multi pump.
Great improvements, thanks for sharing, all the best to you and your loved ones
Thanks for checking out my new video Donald 😊👍
Thanks for sharing another great video! I would never have thought that a petrol engine would be the more reliable choice compared to a diesel engine. But I guess this is the power range where the table turns. :)
I own four diesel machines, and I love diesel engines for my tractors and skid steer. you buy whatever suits your desires and needs and then make a video. I have had no problem with parts or supplies for these machines, knock on wood. cheers and keep up the good videos.
I vote get another gas model, but if possible, larger engine. Least then if you got a different pump, you have a large enough engine to not be bogged down.
Diesel is much easier to store. Like the expnding track option, especially for where you are at!
I'm a diesel guy or, at least, I used to be. With all the smog control crap they put on newer machines these days, you have to buy DEF and wait for the engine to go through regen modes and a bunch of other stuff. Maintenance costs can be higher and they can also be harder to start in the winter. I'd stick with the gas engine, imho. As to the thumb hinge pin: Could you take the pin to a machine shop and have them drill horizontally through it and then 2 strategically placed holes crosswise? Screw in a grease fitting and have at it.
I bought from this company because of your original video, I got the one with the diesel. I really like the diesel model because it is quiet, the only downside is the fuel tank is really small. i get about 2 hours run time before I have to refuel. i am going to be putting in a larger tank
Good to hear you have been happy with your mini so far! Yeah a bigger fuel tank sounds like it’s in order, especially being a diesel, a little harder to prime when ran out of fuel. How many hours do you have on yours now?
@@Mikefestiva just 5, got it about a week ago
Nice reviews on this machine. I’m currently looking into them a bit more for remodeling business-digging egress window wells etc on my timeline. What’s the digging depth of this particular model? On their site is says 4.9ft. Is that accurate?
It seems like at least the telescopic track is a must for stability.
lol @ Thumbnail 🤣🤣🤣🤣🤣🤣 thanks for another video Mike
Thanks Ants 😊
haha I’m glad you liked the thumbnail 🤣
Hey Andris you like Mike as well! Both you guys are great
Thanks Mike. Very informative. Looking to buy one myself.
I think you will get a lot of use out of one. Zero regrets buying mine. 👍
I gotta say Mike that the simplicity of the Briggs motor is a seller for me... it's convenient..I'm purchasing a mini and the expandable tracks are my thoughts too...thanks for the video and info
Realy good video, i would like to see how the diesel version is.
Nice to see a vid from ya mike!
Thanks man! I really appreciate it 😊
I’m definitely looking forward to see your next video on the old mini Excavator project you have been working on 😊👍
Nicely done on the review Michael. As for your idea of selling it and obtaining another model with a diesel engine, I am torn on that issue, I would love to see how the diesel machine performs with the additional options so I vote yes on going that route. But... I kind of also want to see how this machine performs in the longer term. Since you would be selling to a friend, my guess is we could also maybe see the longer term performance of this one through your keeping in touch with him and doing video updates on how he is doing with it? Either way though, it is whatever works best for you, we (all us viewers) win either way! Seems as well that you could sell your bucket mod pieces as a kit to reinforce the skimpy ones that are out there so maybe think about offering it via an online store? Thanks for your time bringing us along on all that you do, be well.../B
Hello Mike, thanks for a great video. I’d love to have one of these, but I just don’t have enough work for it.
You asked about fuel choices…. I personally would enjoy seeing how the diesel works out for you, especially compared to the current gasser. That said unless you really want to go bigger I wouldn’t bother trying to swap it out. I just think that you’ve done a lot to get this thing where it is. If you buy a new one you’ll have to reinforce the bucket again, and other such things you’ve already done on this machine.
Clear as mud?
Anyhow, thanks again.
Mike, take of yourself and good health, and a have nice weekend and next week.
I like that little skid steer. I could use one to go with my new Groundhog 1 Ton excavator on my property in Northern Ca. Looks like you found another good dealer in Texas. I had good service with Ground Hog of Texas. bought it as soon as they unloaded it off the truck and it was trucked to California a few days later .
Mr. Festiva, I🎉 appreciate you wanting to upgrade, but I come to your site to find how to make harbor freight and/or budget equipment classy!
Mike, I'm probably never going to tell you to not buy another tool, especially if you the opportunity to get your money out of your current tool. That said, I think the expandable track and swing boom would have value for you. Just bear in mind all the extra hydro fittings and connections that adds.
As to gas vs diesel: captain's choice. Personally, I prefer diesel for equipment but for light duty, the ease of repair of gas engines makes a lot of sense too.
I’d like to see your take on the diesel model. You could compare and contrast between the gas and diesel and not many can probably say the same. Diesel is nice, a lot of guys likely have a diesel tractor at home, and a diesel pickup, so naturally diesel in this so everything is on same fuel.
I'd go with the diesel. Gives you some extra weight, power, reliability and hopefully good fuel economy as well.
Unless it's thousands more , then keep with the gas.
First! Love ya bro!
Thanks man! I really appreciate it 👍 have a great weekend!
Great review honest easily understood thnx for this!
Hey Mike. I cant send a link or photo because of restrictions but Harbor Freight has a d cell battery operated transfer pump that goes into the mouth of your gas jug and transfers the gas to your machine. I have had tow to fill my Ultralight aircraft. awesome and fast. make refueling that easier. $10
What a little rippa.
Cheers Mike 👍
Haha 🤣 thank for checking out my new video! 😊👍
I got a 2024 with enclosed cab from the same source. I ordered it on Ebay and added the rake attachment. Shipping was free and final cost was the same as what Mike paid for his. I think the cab models don't sell as well, might be why it was a good deal. Don't know. It also has the RATO engine, not the B&S. Research I did says the RATO engines are available at Harbor Freight. I'm 6'7" and was concerned if I'd fit in the cab. Pleasantly surprised, it's quite roomy. I modified the cowling to swing open. Added a fan to pull air out of the engine compartment using the existing switch installed for the track spread, which mine doesn't have. Added a simple tach/hour meter. Also, extended the walking sticks to help have a bit less Jerry control. I've found to avoid Jerry hydraulics just move slowly. Shipping took about 6 weeks. But, the company was great about keeping me informed and once the machine got to the States it was to me in 3 days. No regrets here.
I've got a machine getting picked up from them and shipped out to me on Monday. How far from Texas are you that it took three days? Just trying to gauge my expectations!
@@richcrosby Idaho
Mine came with pedals fir thumb and blade. I like those. The one thing it doesn't have is a hydraulic fluid temp Guage. It has a round bubble type Guage. Not as useful, imo, as the type I've seen with the thermometer in them. But, oh well.
Get the Diesel. I have a 30yr old Kubota tractor with the exact 3 cyl engine most of those mini excavators come with. It is not expensive for maintenance and I have never had to do anything other than routine maintenance. Parts are EASY to source, there are zillions of small Kubota and Yanmar diesels out there. People saying diesels are expensive to maintain must be thinking of big semi truck engines. Diesels are quieter, produce more torque at lower rpms, last longer, and sip fuel. You can even buy off road use diesel that doesn't have any of the road use taxes added.
Hi Mike. Really like your videos. I think you should go with the diesel model. Assuming of course the cost is not outrageous. Love to have one of these mini ex’s around my property but my Kubota BX will have to do for now.
i'm in wash also.
did septic work. risered tanks and such. loved living in place where almost half the houses are on septic. good money . retired now. westport area.
I would definitely go diesel, both Yanmar and Kubota are pretty much bullet proof though yanmar parts are more expensive. cheers 👍🏻🍻
Both of my machines (excavators) are running on diesel. I wouldn't have it any other way. Very smooth and powerful even down to the low rpms. Never had an issue that couldn't be dealt with easily and the small one uses a 3 cylinder Kubota diesel engine. The small one is what is called a 2 tonne Chinese model. It has the red arrow on the side of the track frame like yours. 4 post sun shade is certainly better than a 2 post. Mine has the expandable tracks for width but I have only used it in the widest setting and never had a need for it to be narrower. Just makes it feel more stable. I have removed the door off of the back which accesses the oil and other engine accessories but I did this because the fan really drove the air right to the centre of the door and it made sense to help the cooling in the 100 degree weather we have been having a lot of in the Okanogan here. The hydraulic oil fill and diesel fill is on the right side (of you sitting) and has see thru fill gauges you can easily see. Hydraulic thumb was standard and there is plumbing for accessories like a breaker or auger if you like. I got this mainly for orchard work because we would plant trees with an auger but when hitting any kind of rock, which we have plenty of, the auger would deflect causing the tree hole to be off. With the bucket on the excavator this doesn't happen. Just dig out the rock.
They are an absolutely indispensable machine for almost any purpose.
Great to hear your experience with your machines 😊👍
Fell in love with the mini off road truck video. However, this excavator content is amazing. As far as gas or diesel goes, if you have the money to replace it or skills to DIY go diesel. Otherwise, if you are poor like me, gas it!
I wish I could rent one of these for a couple of days!
Go to home depot and rent one it's not that big a deal
100% stay with gas, keeps future repairs down and easier to maintain.
Definitely seems like the way to go for me 😊👍
Stay with the petrol,it does what it says on the tin.. If you go diesel with all the add ons.swivel boom, expanding tracks etc you may as well spend the money modifying your yanmar
Hello, I have the diesel one for 7 months.
I didnt have any problems with my R319.
I have this moment 65 hours on it.
A good point about the machine tipping from being so narrow and inexperienced operators
I say go for the diesel model. I'd like to see that review and it would be a great one to compare to this one.
Get the diesel I’d love a good honest review
Definitely get the diesel model.
I'm considering buying a Chinese mini-ex. I build decks and do small carpentry projects for a living, and I don't need a large machine, I just need something to replace my shovel. I work by myself and I'm very much over digging holes. Not to mention buying one of these machines will take the place of a worker. Worker's comp, taxes, and liability insurance isn't cheap and possibly replacing a worker will pay for this machine many times over.
As long as you take care of it and do basic maintenance I think a Chinese mini would work well for your work. Yes it’s definitely like having extra help, definitely a game changer for sure. 👍
Although selling this one and buying another might be good for the added content you will be able to produce, I don't really see any other advantage. If you really need the wider track, you have your bigger machine. This one fits all your needs for a small excavater, so why change? My suggestion is to keep this one, use your new attachments and tell us about it. Run it till it dies is my motto. The longer it runs, the less it costs, and when it is completely shot,, you can still make a buck scrapping it.
Nice machine Mike and video.
Hey Mike, just got the brand new version today, diesel and all. Still sitting on the trailer so I've gotta figure out how to get it off of there safely lol. If you have any questions whatsoever regarding this new version, hit me up. Took 4 months from start to finish but I'd say it was worth it.
Well damn Mike, every time you post a new video I have to buy another piece of equipment..lol. Looks like a super useful machine, and I would stick with the gas motor. Thanks for the upload, love the content..:)
Haha well sorry man 🤣
Thanks for checking out my new video!
i owned a b12 yan. my brother over heated it.and took out the middle rings we will not go into how it all happened.
any way. it took only a weekend to re build it. three cylinder diesel are nice. not bad on fuel.
had to put my own thumb on. really like that size.rented anything bigger.
To me it sounds like your yanmar is a little too big for your needs since you’re not running that much and the rippa is a little small since you’ve already found the limit of the original bucket. I think it’d be worth while to sell both and buy something that is in between the two size wise. That way it’s a little stronger and more powerful but you can still get into the tighter areas
20:50 yes, that pin needs bushings and grease. If the pin is hard or even almost as hard as the thumb ears, the thumb will wear out.
Theres a channel called
"Our life in trees" and the guy bought a mini Chinese skidsteer with attachments and he does a detailed testing of the machine, the build quality is fantastic and over built.
Doesn't use enough fuel to justify going diesel at all if it's harder to work on (better not have to pull engine for anything). I would check it out in person for quite a while.
Also, what about adding some tractor weights to the back for more lifting capacity/stability (sorry, we've seen you're an excellent fabricator lol)? I'm sure 500 lbs would go a long way and add fairly minimal length.
I believe mike is planning on fabricating a counter weight in the near future