Selling Cheap! Chinese Mini Excavator and Mini Skid Auction
HTML-код
- Опубликовано: 6 фев 2025
- Today we visit Rogers Ohio for an Equipment Auction Selling Chinese mini excavators, mini skids, skid steer attachments and more. #smallbusiness #auction
Our Website: www.outdoorswi...
Our FaceBook Page / outdoorswiththemorgans
Our Instagram ...
Our Amazon Affiliate Store www.amazon.com...
Our Address: Outdoors with the Morgans
P.O. Box 2140
Cranberry Twp. Pa 16066
Partners and Sponsors
Kubota USA www.kubotausa.com
Wolfe Ridge Log Splitters www.wolferidge...
Stihl www.stihlusa.com
OUR EQUIPMENT LIST
Kubota KX-057-5 Excavator
Kubota SVL 97-2 Skid Loader
Kubota MX 5400 Utility Tractor
Kubota LX4020 Tractor
Wolfe Ridge Pro 28C Commercial Log Splitter
Woodmizer LT50 Sawmill
Split Force SF 11/16 Self Propelled Log Splitter
Split-Fire 4209 Log Splitter on Excavator
Kubota SideKick UTV
Polaris Sporstman 850 4 wheeler
When you don’t have money but work hard you can get some work done with one of these. It’s all about working within your budget.
The clown cars are headed for Chicago in August for the convention….
Isn’t that Milwaukee you mean😂😂😂😂
And Facebook!😊
No doubt Mayor Pete will be riding his bicycle! SMH
GFYS, Bubba
@@justhavfun1Thomas is an idiot.
Forklift sparked your interest I see, Matt from Diesel Creek channel bought a few at auction for resale. He is in same state as you are. Perfect for the building and moving lumber around indoors
Hello Morgan family. I enjoyed the auction walkabout Mike. I am curious about one thing, have you ever operated one of the "micro" excavators? Three years ago I purchased an Agro Tek 1.2 it came with A Kubota engine (yes way) it has a Kubota D722. Purrs like a kitten. The excavator has been a real asset. We have put 650+/- hrs on it and the only real repair was to replace a drive motor. Parts are not a problem they have them in Chicago or Dallas. You are correct they are great for replacing a shovel. Right now mine is under a house digging out for a 800 sqft wine cellar. Super handy. My unit has the expanding tracks that adjust from 38" wide to 46" wide that helps stabilize the machine. Thanks for all the great videos, it is great to see what other like minded people are doing all over this great country of ours.God Bless America and God bless the Morgan family.
cheaper than hernia surgery! I have an AGT L12 and love it
And God Bless you for asking God to bless the Morgan family. God Bless.
I appreciate going to the auction on video and with your observations and commentary.
Thank you.
That Massey Ferguson tractor was a steal of a deal for whomever bought it I hope your having a great day
I seen lots of people put a hole in a fork for a hitch ball with a pin so it’s easily removed and you don’t need a dedicated attachment for moving trailers
Mike those trailer mover adapters are for skid steers and mini skids the inner holes on the attachment plate are for the mini skid the outer holes are for the Kubota you have they make them that if you have both pieces of equipment you can use the same adapter plate
Mike those remote mowers are for areas that are not conducive to sending an operator on. Steep slopes or maybe even wet area is where they would shine.
i actually have one of those remote mowers... (sent to me for free for me to test with a container of bush hog mowers)... i have tested it on steep slopes unable to safely mow. For what it was designed for, that work good.
Could you tell me about the auction site? I'd like to find out if there is something similar in New York, CT, RI area.
Always love a good auction
I believe those trailer hitch adaptors would work on your mini skid also. We have Bobcat S650 and a MT85 and we can use the trailer adaptor on both. As long as that top lip goes all the way across and there’s a 2nd set of holes on the bottom, it should work 22:52
Thank you and especially for going over the sold prices.
Mike congratulations on your purchase of the bucket for your skid steer 😮😊❤
Vermeer anything is tough to beat. Great products designed and built by intelligent Americans for intelligent Americans. God bless. TFS
micros are essential for piping slabs in commercial buildings
Good morning y'all !!! Hope you have a great day, and hello from British Columbia.
hobby hard wood Alabama has a kiln set up in a forty foot container . think it is set up for tracks to end load
Hello Morgan family. I enjoyed your video.Have a good week and weekend.🙏❤️🇺🇸
That Massy was the nicest thing there! I'd like something like that!
Good morning Mike, Melissa and family!
thanks for posting. Useful content.
Good morning Morgan’s!! Have a day!
Good morning to Hunter 👋👋😸 and family and friends 😸😺
Good morning my friend. Hope your doing well. 🙏
Good morning!
Hi BadCat! Happy Purrsday! 😺
@@Hallnout / good morning friend 👍🙏
@@OutdoorsWithTheMorgans 👍🙏
The mini / micro - equipment really shines a light on the power that hydraulic’s truly have. Far from old cable equipment.
Key Quote you made ~ 'You Get What You Pay For'
Thanks Mike. Have a good one!👍❤️
That Massey was less than half price. I have one and it's amazing. Did it no sale?
Massy is respectable. I have the 2850M W/cab. It's been an excellent tractor for my needs. We mow and maintain our gravel. Massy's price point when compared to Green and Orange isn't bad. I'd say a step about the budget brands.
Cool video I love auctions ,I know it's a gamble but so much fun!
Them attachments went cheap might have to check out a action. That was definitely a steal on that massy tractor. Keep up the good work.
It’s cheap to ship from China to the US because a lot of this stuff is subsidized by the US government.
It’ll be interesting to see how the bucket you purchased last use it cautiously not worth tearing up your equipment or hurting yourself over saving a few bucks
Hi Mike,
One thing your Vermeer will have that those other mini skids won't is after sale service.
And it WILL start the 3rd time they try😂😂
hi there interesting , best to all john
I try to stay away from auctions now but it is still fun to watch.
Everyone that calls these junk should consider,the same manufacturer built half the parts on their Ford,Harley,and everything else you own with an engine.
It's like you're at my auction here near my house. They're still in the exact same stuff. They even have the same shipping containers. They don't even change the pictures from auction to auction.
Lots of good bye's. And a few good buys.
I bought one of the mini skids at a auction near my house . I have a big JD skidsteer and a Komatsu mini excavator but the mini skidsteer is useful and easy to get on and off of. Your Vermeer is probably worth 10 times as much as the china ones and I would love to have one like that but I didn't have that much to spend .
Good info Mike!👍
Excellent mike cheers 🥂 😊
Good morning, we have a similar auction site in Southern Ontario. Bryan's Auction, near hamilton
Interesting content 👍👍👍
Hello from Australia. Keep up the good work
G'day Trent where do you call home ?
@@ishure8849Adelaide hills. We have a few farm here.
Good seeing other Aussies watching!
Getting what you want ❤
To each their own. Match the equipment and cost to the tasks and longevity
Thank you for information
I think Melissa would have looked really good in one of those clown cars, Mike.
Pretty neat auction. Some of that stuff might be ok. Good luck with the bucket, i hope its good. Stay safe everybody
Love my mini/micro Chinese excavator, I've got a wopping 30 trouble free hours. Basically they are built very similar to a log splitter, not a whole lot to go wrong.
Tiippy micro excavator , ask Tom with the Hauses!!!
Auctions can be fun. Thanks for the review.
I go to them for entertainment. I always learn something and sometimes find a treasure. You can talk to others and share ideas.
No disrespect, but mike you act as though you have it going on.
I love what your doing,spent many a day using the dynamite that you used blowing chocker holes to get the logs out.😊
Good rainy morning Mike....
Pete 🇨🇦
Good morning Pete , boy did we ever get rained on yesterday ! Our Decarie expressway had to be closed due to flooding ,
pretty severe 🙀
Hi Pete, Typical summer day here. Clear skies with high of 93° F. Have a day!
@badcat4707 morning BadCat, lots of rain, not as severe but wet.... still raining...
That massey ferguson would be good for you, nice tractor they are
Micro excavator , should be the correct definition . You are correct my brother!
I think you just remember he is well funded by manufacturers of the big machines
Articulated loader or mini skid? What would lift logs for cutting with a chainsaw better?
we call that "The Rogers Mall". It is fun when you travel as I am from the general area and often see landmarks that I know of. Wasn't sure if you crossed the Eastvale Bridge or not but Rogers I definitely know. When I had a more flexible work schedule we used to go there on Fridays for their Flea Market.
when it is time for repairs i bet getting parts and service will be fun
Morning Morgan's I have to say you are right about the Chinese equipment but the prices I have seen on them is high they won't a lot for them yuppies down here are buying them up thinking they have a great people who have never ran anything before but they are finding out that no one will work on them when they're not working but I don't think they're be one on my farm ever, God Bless Y'all and have a great day 🙏👍
Good Morning Morgan Family 🌞- Have a Wonderful and Blessed Day 🤠
I enjoyed your video today.Have to good day.🙏🇺🇸
What auction was this? I cannot find it anywhere on your page
Thought Mike was going to bid on the Massey. Good deal.
Pepperidge farm remembers when things were made in the USA.
And you couldn't afford one then either.
@MrSteeDoo lol, I own 2.
Quite the assortment of equipment
I wouldn't bet my life on those Chinese chain slings!
retired here in westport wa.state.
i worked in septic fora long time. for my self. owned a yanmar b twelve for ever. if i needed anything bigger. i rented it. one of the only things i wished i would have had was a small front loader. skid steers make a mess.. gravel into the trenches would have be easy ear.
Looks like they might’ve been on the forward section of the Dali?
thanks for sharing the sale prices seems to be about the same price they are selling in So cal
Parts, parts , Who has parts for these little gems. Better buy 2 cause one will be parts.
Problem is, same parts will break on both!
Amazon will get you whatever you need for these machines none of this stuff is proprietary as opposed to modern name brand machines where they won't even try to help you without a Vin or serial #
That Massey Ferguson would be a good replacement for your Kabota tractor ?
Where is this Auction site and what’s their name? To find out more information about it please
Hi Mike. I agree Mike. The Massey tractor looks great. However. After you showed your Kubota excavator & skid loader. No Chinese excavator & skid loader for me.😑😑😑👎👎👎 Thanks Mike. Say Hi to Melissa, Eva, John ,Hunter, Tyler, & Hannah. 🥰😊😉👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻
Hope you buy the Massey
Those mini skids have their place I've run 2 bobcat mt100s but man the second I was able to use the cat 289 again I RAN for it lol they are jumpy little buggers
Also I don't understand the fascination with these throw away Chinese mini ex's , people are buying them left and right because they are inexpensive but for what you could accomplish by renting a real mini ex with heat/ac and way more power how is it worth it ? I get it you can work as you please a little at a time after work and stuff as long as it is running I guess right ?
My buddy watches his job site in the oil patch .he is a supervisor for Manitou cranes.they find the shackles or chains they cut them up and throw them in scrap bin .Said they aren't safe
That mini clown car should be called a MeGo
Need to find one if this auction in Texas
GovPlanet has a bunch of the mini skids and micro excavators
that electric is meant for indoor use only and yes thats an outstanding price for one usually double that or more
here
You would have to be nuts to trust those chains, binders, clevis and pins
I believe I might be in a different financial demographic than you Sir. I would have to save to buy one of these imported mini excavators and it would be a significant purchase for me. I certainly couldn't afford to purchase one for my grandchild. As for the mini skid steers, certainly a name brand one at ten times the cost of an imported one would be the wise choice if money was available for the purchase, but again at a tenth of the cost, they provide a value for other people in a different market segment.
I bought a new bucket for my PC60-6 excavator. I bent it the very first time using it. I ended up rehabbing the original bucket and never looked back. Lesson learned.
I want that side opening shipping container
The problem people do no understand about most of those items. Look at the components it's made of. Most are generic name brand parts, but people do not seem to realize that. On mini skids you have compare size to size.
I'm not trying to ruffle any feathers here but I bought a Land Pride skid steer bucket for my Kubota SVL and it was about 4 times as much as one of them cheap buckets. Not saying those buckets are junk they still have a place and a use but the oldest saying "You get what you Pay for".
Looking at the winning bidders, it seems a few people won everything.
I look at a person needing a engine for a old truck, a large truck is what I refer to and see a gen set for that price. The copper gen set portion would bring enough for scrap to pay shipping and the fellow buying a engine thats repairable is a good deal. I did used to go to auctions many years ago when the navy put up auctions and did very well. I bought a container without looking inside as it was locked up. I got that container for a very very good price and it did meet my needs. Inside of this container was a huge surprise as it was full of a couple different home furniture. The people who are relocated of the base and went somewhere else most likely bought all this new furniture on a payment plan but once it is on military base, the seller lost everything and it did furnish a couple rentals I had with very high quality furniture that was a huge bonus for me. I was in the army and knew how things worked. I went on one auction where boxes of stuff marked tools and got three for almost cheaper than scrap price. At that time was not a lot of money. Inside was all snap on tools but the military number system marks. Snap on still honored their tools if broken or unusable.
Mike you should have bought that skidder! 😊
How do you find out about this type of auction?
NICE TOYS!!!!!!!
A remote control mower sounds handy for my small piece of land.
Or working on steep slopes.
can you send me information where i can find the foam spray gun that you wash your vehicles with?
I surprised you made it all the way home. The trailer you used is not rated for a 2 ton load. Always have your bucket facing downhill and close to the ground to stabilize your decent.
Like my grandad always said, I'm too poor to buy cheap.
GOOOOOOD MORNING TO ALL MY FELLOW OWTM’s FANS/FOLLOWERS FROM A HOT 🥵 & HUMID VIRGINIA BEACH!!!!…. Mike, thanks for bringing us along… I sure wish I lived closer to that auction but then again maybe I’m glad I don’t.😂
Having a day!
HELLOOOO HUNTER 😊
Hi Jack?
@@davidmorse8432 howdy there David
I've been to couple of those auctions and bought some small items but when it comes to attachments & equipment that stuff is not for me. You are right you pay for what you get!.
A friend of mine does reservoir Hill work mowing his remote control .power was $30,000 a lot bigger 60 inch