Exactly the information I needed to complete my rainwater collection system. Sometimes it's not about the process but the idea (turn the top upside down) that is the inspiration.
Love it when I have an idea for a project, search just to see if someone had a better idea and discover not only an easier way to work the project, but keep a function of the original device intact rather than destroyed (The lid in this instance, as i was consigned to destroying the top) Thanks for the vid!
I have done it with a table saw. All you do is set the rip fence at 2 and 1/2 in it's a little harder by yourself but it's feasible better with two people but just turning the barrel on the saw blade make sure to all the liquid is out of it and just turn it till you get all the way around it cuts a nice and even.
You can notch that lip that sticks up on the lid to help shed water. You can also add a pair of hooks to each side to apply a stretch cord to keep the lid down
These barrels are handy and with a removable top, even more so. But just one caution to your viewer if I may. Be VERY SURE you know what was originally in the barrels you get. Many of them used for industrial purposes may have contained all sorts of highly toxic chemicals. I would NOT use any barrel, even if allegedly cleaned out, that contained toxic chemicals for potable water storage or even for water for plants. Use barrels that contained non-toxic substances for that. Barrels which had toxic chemicals are still very useful. I'm posting a video soon on my channel showing how I converted one to a mobile tool caddy for holding long handled tools like rakes, brooms, etc. Getting the lid off is a good first step.
Sorry. I see now, you cut the top off and turn it upside down, not inside out, i thought you meant you turned the lid inside out, not just turn it over. Thanks for the video.
Hi. I have been trying to use these type barrels as pheasant feeders for a while now. This is the best way to make a lid that i have seen so far. How to you turn the lid inside out once it has been cut off? Surely its quite a tricky task or is there a easy way to do it? Thanks for the idea though.
I want to use one of these barrels for a rotating composter. If I remove the lid per your method, does the barrel become too flimsy? I plan on drilling holes in the top to refasten the lid with bungies. Any advice would be appreciated. Thanks
Yes. I really need this tips. Slicing the plastic barrel using hand saw!
Exactly the information I needed to complete my rainwater collection system.
Sometimes it's not about the process but the idea (turn the top upside down) that is the inspiration.
I want to make recycling bins out of these, this is EXACTLY the video I needed, thank you so much!
Haha, awesome video, enjoyed the sense of humor, as well as the instructional/idea! Thatnks!
Love it when I have an idea for a project, search just to see if someone had a better idea and discover not only an easier way to work the project, but keep a function of the original device intact rather than destroyed (The lid in this instance, as i was consigned to destroying the top) Thanks for the vid!
Yes, just what I was looking for. Many thanks.
Loved it, thanks for the tip!
what a great idea i can get these barrels very cheap and with this thay have many more uses thank you for posting 5/5 stars
WOW! I've been looking for this! Been cutting inside the lip and using heavy garbage bags to seal using bungee cords.
I have done it with a table saw. All you do is set the rip fence at 2 and 1/2 in it's a little harder by yourself but it's feasible better with two people but just turning the barrel on the saw blade make sure to all the liquid is out of it and just turn it till you get all the way around it cuts a nice and even.
Great idea
good for storing sand ... in these northern icy areas. and I use them on our porch to toss the smaller full trash bags in until dump day.
You can notch that lip that sticks up on the lid to help shed water. You can also add a pair of hooks to each side to apply a stretch cord to keep the lid down
These barrels are handy and with a removable top, even more so. But just one caution to your viewer if I may. Be VERY SURE you know what was originally in the barrels you get. Many of them used for industrial purposes may have contained all sorts of highly toxic chemicals. I would NOT use any barrel, even if allegedly cleaned out, that contained toxic chemicals for potable water storage or even for water for plants. Use barrels that contained non-toxic substances for that.
Barrels which had toxic chemicals are still very useful. I'm posting a video soon on my channel showing how I converted one to a mobile tool caddy for holding long handled tools like rakes, brooms, etc. Getting the lid off is a good first step.
Thank you for this. Very helpful!
Any ideas on how to seal it after the cover has been made?
Sorry. I see now, you cut the top off and turn it upside down, not inside out, i thought you meant you turned the lid inside out, not just turn it over. Thanks for the video.
Thank you!
Hi. I have been trying to use these type barrels as pheasant feeders for a while now. This is the best way to make a lid that i have seen so far. How to you turn the lid inside out once it has been cut off? Surely its quite a tricky task or is there a easy way to do it? Thanks for the idea though.
Could one cut where the lid is molded melted to the barrel and reseal the lid for a airtight fit
good idea
THANK YOU!!! :)
I want to use one of these barrels for a rotating composter. If I remove the lid per your method, does the barrel become too flimsy? I plan on drilling holes in the top to refasten the lid with bungies. Any advice would be appreciated. Thanks
wish you would have shown more detail with lid...
what saw did you use to cut the plastic? the video is not helpful
look at :19 sec mark and you'll see his handsaw in the background. Any saw will work just use whatever you have.
Not helpful what did you cut it with?
It's in the video clearly
didn't even show him sawing, lame