From what I can tell yes! As you can see in the video this way uses art net. Art net is used in most consoles if not all (except for not digital). Now if you do the same thing and go into protocals on MA2 you should see the same thing. Hope this helped. -jazz productions.
It will work with MA2 onPC as long as you have one of the onPC hardware devices connected, but at that point, all of their hardware that would work already has DMX outs on it. MA2 onPC does not give you a free universe like dot2.
Hey i tried the tutorial and it worked but i just got a lot of new fixtures and the open dmx interface is having trouble with so many fixtures so i was planning to buy a enntec dmx pro adapter but when i select that interface and i restart the software it just would not save it and i dont know if its gonna work because i want to know if it will still work before i buy the interface
Hi Andrew, Firstly, have you done the GrandMA2 on PC video yet? Also is this something we would have to configure every use of the software? Secondly, have you got any experience with mapping a mixture of USB midi controllers like the Akai APC40 or the Beringer BCF2000 Lastly, I have a Martin USB to DMX adapter, do you know if this would work like the Enttec or not, just thought id ask. Thanks.
Steve HYTEQ best thing to do would be to test the interface and see if its on the dropddown menu on the art net to dmx software. You can map midi to dot2 using tools>midi config. But most people get bomes midi translator. Which makes it easer and lets you use faders
It depends. If you set your show file up properly then it will work and save. The only thing I would think have to be fixed depending on what your set up was would be the art net. Other than that if you save your art net program and leave all you will have to do at gig is open up and start your session and open up art net on console.
From what I can tell yes! As you can see in the video this way uses art net. Art net is used in most consoles if not all (except for not digital). Now if you do the same thing and go into protocals on MA2 you should see the same thing. Hope this helped. -jazz productions.
Hie bro i just checked it with usb to rs 485 module and the output is good But i have braking my signal output in every 5minutes. But it can connect after restarting my system Can you have any solution for it
Hi Andrew, I would like to know if you can drive with the same technique how many dmx universes and if you have tried the dmx universes in artnet thanks
Hello! Do you just tried with several moving Head? I already configured with uDMX interface and work fine. But I'm afraid of latency with too many linked machines.
Will this method work with USB to RS485 TTL Serial Converter Adapter FTDI Interface FT232RL Module TE661 if not is there cheeper devise out there Enttec .
No. It will only work with the cheap ones that use free styler. This is a good thing cause other dmx device cost 50-3000 dollars as these cheap ones cost around 2-10 dollars.
I Figured out how to fix this issue. use the command in the dot2 command line "SetIP "Microsoft KM-TEST Loopback Adap (Ethernet 2)" 13.13.13.13" You may also want to set the ip to 2.13.13.13
From what I can tell yes! As you can see in the video this way uses art net. Art net is used in most consoles if not all (except for not digital). Now if you do the same thing and go into protocals on MA2 you should see the same thing. Hope this helped. -jazz productions.
All universes on MA2onPC is forbidden to be output via Artnet unless a wing, a node, an NPU or a console is connected to the computer. It's said that some hackers successfully created some sort of "unlocker" which emulates an MA NSP and subsequently "cheats" MA2onPC to send out Artnet signals, but I can't find any.
Hey Guy! Thanks for the vidéo! I make a video about the same subject too, for my french friends, So I talk about you, and I put the link of your video in the description! :D because it’s like a translation copy and I think you must ne advert about my video :)
You can rename the interface in adapter settings in your PC, so if you name it DMX Loopback it will show in MA2 as DMX Loopback
Works like a charm.
DmxIs user can follow your steps, also using to use dmx drivers in art to dmx. as simple as that.
Thanks Andrew!
I don't get a signal out of my enttec open dmx. You might be lucky
Best review of an MA Dot I've ever seen!!
Oh Alice lol
Thanks bro, I have tried with grandma2 and it works perfectly
Pls enlighten me, how did you do it?
That video for grandMa2 at the end, did it ever get released?
yeah, you save my life today!!
hey cool tutorial! so can this be done with grandMA2 onPC as well? would like to see a tutorial on that
From what I can tell yes! As you can see in the video this way uses art net. Art net is used in most consoles if not all (except for not digital). Now if you do the same thing and go into protocals on MA2 you should see the same thing. Hope this helped. -jazz productions.
It will work with MA2 onPC as long as you have one of the onPC hardware devices connected, but at that point, all of their hardware that would work already has DMX outs on it. MA2 onPC does not give you a free universe like dot2.
@@normotoryjazz6446 No it does not work.
Awesome mate! Worked straight away! Good job.
Hey mehn... Thanks for this video.
Will this procedures work with an Entecc DMX USB PRO?
Can i know how to connect usb interface dmx to avolites titan control lighting
Hey i tried the tutorial and it worked but i just got a lot of new fixtures and the open dmx interface is having trouble with so many fixtures so i was planning to buy a enntec dmx pro adapter but when i select that interface and i restart the software it just would not save it and i dont know if its gonna work because i want to know if it will still work before i buy the interface
Verry nice, worked fine for me!
Hi Andrew,
Firstly, have you done the GrandMA2 on PC video yet? Also is this something we would have to configure every use of the software?
Secondly, have you got any experience with mapping a mixture of USB midi controllers like the Akai APC40 or the Beringer BCF2000
Lastly, I have a Martin USB to DMX adapter, do you know if this would work like the Enttec or not, just thought id ask.
Thanks.
MA onPC does not grant 1 free universe just Dot2 onPc
Steve HYTEQ best thing to do would be to test the interface and see if its on the dropddown menu on the art net to dmx software. You can map midi to dot2 using tools>midi config. But most people get bomes midi translator. Which makes it easer and lets you use faders
Do you have to go through this process every time? What bits would you have to do at the gig?
It depends. If you set your show file up properly then it will work and save. The only thing I would think have to be fixed depending on what your set up was would be the art net. Other than that if you save your art net program and leave all you will have to do at gig is open up and start your session and open up art net on console.
Great video!
How easy is it to learn......easy to get going? Can I use my APC40 mkii?
Wow!! You can do the same with Sunlite Suite 2?
Hi Bro, thank you very much for this imformative video, have you already posted video for GrandMAonPC?
From what I can tell yes! As you can see in the video this way uses art net. Art net is used in most consoles if not all (except for not digital). Now if you do the same thing and go into protocals on MA2 you should see the same thing. Hope this helped. -jazz productions.
really great and informativ Video I would ever racoment.
great vid, i too would recum
Can you please share with us how to do MA2 on PC with this setup?
You need MA hardware to unlock paramaters for MA2, you could however buy an MA3 vis key and have paramters unlocked in mode3
Hie bro i just checked it with usb to rs 485 module and the output is good
But i have braking my signal output in every 5minutes. But it can connect after restarting my system
Can you have any solution for it
Thanks !!
I have everything set up and is receiving Art Net but not DMX, any thoughts?
Hey... Nice one, can this be done with Resolume
yep
Hi Andrew, I would like to know if you can drive with the same technique how many dmx universes and if you have tried the dmx universes in artnet thanks
Unfortunatly only 1 universe without dot2 hardware.
Hello. God video but Why do not you use a loopback adapter?
+Adriel Hillairet I do
when are you going to do your ma 2 open dmx video
art net to dmx says: art net not detected. what do i do?
Hello! Do you just tried with several moving Head?
I already configured with uDMX interface and work fine.
But I'm afraid of latency with too many linked machines.
+Marco Bento that's because of the udmx
If you used an enttec open or pro you'll not get any noticeable latency
You are sure? But enttec open dont have a internar frame buffering..
Huh, an actual usefukl video!
Good one! Worked like a charm and did exactly what it's supposed to.
when will you do the ma2 video?
Will this method work with USB to RS485 TTL Serial Converter Adapter FTDI Interface FT232RL Module TE661 if not is there cheeper devise out there Enttec .
kieran paton sorry can't help you there mate
Should work by selecting Enttec Open DMX as interface. For details see stevenbreuls.com/2013/05/diy-usb-dmx-dongle-interface-for-under-10/
Will it work with the Grandma3 software?
No, only dot2 gives you a free universe
I haven`t loopback adapter in microsoft, help pls
Will it work on any USB to Dmx device
No. It will only work with the cheap ones that use free styler. This is a good thing cause other dmx device cost 50-3000 dollars as these cheap ones cost around 2-10 dollars.
Is it possible to get this to work with the Enttec Pro Dmx Usb range?
yes
@@captainawesomedude1 how I cant get the software to output and it doesnt even show the artnet being detected
Will this working with enttec pro mk2?? only pro & open dmx?
Yes.
help me! My ARTNET still in 0.0.0.0 i have configured the loopback 13.13.13.13
I Figured out how to fix this issue. use the command in the dot2 command line "SetIP "Microsoft KM-TEST Loopback Adap (Ethernet 2)" 13.13.13.13" You may also want to set the ip to 2.13.13.13
will this work with ma2 onpc?
From what I can tell yes! As you can see in the video this way uses art net. Art net is used in most consoles if not all (except for not digital). Now if you do the same thing and go into protocals on MA2 you should see the same thing. Hope this helped. -jazz productions.
Can you do it to grandMA too
All universes on MA2onPC is forbidden to be output via Artnet unless a wing, a node, an NPU or a console is connected to the computer.
It's said that some hackers successfully created some sort of "unlocker" which emulates an MA NSP and subsequently "cheats" MA2onPC to send out Artnet signals, but I can't find any.
is there a way to do this with Mac?
Considering that MA onPC doesn't exist for Mac? No
@@captainawesomedude1 no, there is dot2 for Mac, but no freestlyer (at least I didn't find it on the internet)
Hey Guy! Thanks for the vidéo! I make a video about the same subject too, for my french friends, So I talk about you, and I put the link of your video in the description! :D because it’s like a translation copy and I think you must ne advert about my video :)
Not working.
Don't work and I don't know why =/
Thanks for this video
RIP your mouse...:
Hey Is it possible to connect 2 Univeres with 2 Adapters?
Correct me if I am wrong but I believe if you have a splitter it will give you 2 universes.
@@normotoryjazz6446 In case you mean DMX splitter, then no. You will just have 2 times the first Universe.
why do you click so hard
Don´t hit the mouse so hard