Fenix Airbus Family UPDATED - Let's try the NEW A321 | Helsinki - Rovaniemi | Real Airline Pilot

Поделиться
HTML-код
  • Опубликовано: 13 сен 2024
  • Join my channel!
    / @a330driver
    If you don't want to join, but still support me consider a small donation:
    www.buymeacoff...
    Join my Discord Server!
    / discord
    My system specs:
    Intel i9-14900k
    RTX4090
    Corsair DDR5 7200 48GB RAM
    Asus ProArt Z790 Board
    Windows 11 Pro
    My hardware:
    Thrustmaster Boeing Yoke
    WinWings Orion2/F16 Grip
    Thrustmaster Pendular Pedals
    Honeycomb Bravo Throttle

Комментарии • 12

  • @Krispyy431
    @Krispyy431 15 дней назад +4

    Didn’t even realise it was you! Thanks for flying! Regarding the push, I had to make you wait because not everyone has GSX and/or the knowledge how to push properly and didn’t want you accidentally blocking the intersection there 😂 hope it wasn’t too much of a delay!
    Kind regards, EFRO_TWR

    • @A330Driver
      @A330Driver  15 дней назад +1

      No worries, in the end the delay was created elsewhere 😂
      As a suggestion, you could of course ask the pilot if they're able to push and stay clear of the intersection. At the time I was still a VATSIM controller myself, I often experimented with such clearances that many others would not issue because of the occasional messup some chaps create. But the vast majority of pilots were able to follow them without problems. I can only encourage any fellow controller to give it a try and become more creative, while 10% will undoutably mess up, the remaining 90% will be able to help you out and in many cases significantly expedite the traffic flow.
      And let's be honest: Those 10% will still cause you a messup, even if you give them the most conservative clearances 😂

    • @Krispyy431
      @Krispyy431 15 дней назад +2

      @@A330Driver fair enough, and in hindsight I could’ve just told you to push onto T and remain clear of the intersection there which would’ve worked fine. I’m still relatively new to controlling so these are the kind of things you just have to go and learn as you control more

  • @yams900
    @yams900 15 дней назад

    Nice one ! I hope latest Fenix installer version has fixed the A319 cargo loading issue :) Thx for sharing :)

    • @A330Driver
      @A330Driver  15 дней назад +1

      The bulk cargo door issue is supposed to be fixed :)

  • @zacherius137
    @zacherius137 15 дней назад +1

    I hope we get a working MiniFCU for the 321.
    I only got it working for the 319 (and 320).

    • @A330Driver
      @A330Driver  15 дней назад +1

      Hi, mine works without any problems in the A321. I've been using it on about any livestream I did with the plane now. Make sure you got the latest firmware installed!

    • @zacherius137
      @zacherius137 14 дней назад

      @@A330Driver Good to know the problem is on 'my side' so I can try to fix it myself.
      Thanks for the heads up!

    • @zacherius137
      @zacherius137 14 дней назад

      @@A330Driver Got it to work! Updated the firmware and am doing my first 321 flight atm from Brisbane to Ho Chi Min city. Thanks!

  • @kingcreed1128
    @kingcreed1128 7 дней назад

    I have 2 questions
    1. Why is the extended centerline on the approach into Rovaniemi purple?
    2. Do you have to Deslect G/S(Glideslope) in the navaid for the FLS to work?

  • @somebodyrandom505
    @somebodyrandom505 14 дней назад

    Did the plane coming into land crash right before landing🤣 3:55:13

  • @Raimundo15
    @Raimundo15 10 дней назад

    oi, meu amigo LT se amarra em tu, tem como dar uma moral pra ele?, Basta comprar o fenix pra ele, vlw, se quiser tambem, da um manche pra ele. vlw