CPU EZ DEBUG LIGHT 2020 (SOLUTIONS)!
HTML-код
- Опубликовано: 23 авг 2024
- Hello guys thank you so much for the recent support!! almost 40 subs!!!! you guys are so amazing!!!! I was not expecting to get many people and ask me for help!! i must say! i am by no means a computer savvy! i just look up your issues and relay the information you and hopefully it works!!
also i will try to post more videos and take question from the comments so you guys are able to fix your computer !
if you have any questions and need me to answer faster ask me in my twitter or Instagram since i get notifications there and not on YT!!
have a great day and God Bless!
Case Speaker
www.newegg.com/...
code beeps
www.computerho...
Jbat1
ebay.us/4Jb6nn
Instagram
/ 0lechuga0
Twitter
/ 0sanchez0
#ezdebuglight
#computer
#Ryzen
#amd
Bro fir real i was depressed about my pc not working with your help it finally works so fr thank you so much bro
ayee man glad it worked!!! if anything else happends let me know!! i can try and help !! pc can be very frustrating
At bro what motherboard do u have
@@airflowway right now I'm using MSI MPG Z390 gaming plus! Its a mid motherboard and just works like a charm ! Have been using it for 2 years!
@@Dominican3nito oh okay thanks
What did you do?
My pc turns on; but i got no display lol, i tried unplugging everything but when nzxt built it its like they super glued the cords in
your solved?
did you ever find a fix because i am having the same issue right now
@@notjun7203same here
Thanks man, saved me from taking my pc at the shop. What worked for me was removing the battery and putting it back in
Yes siiirrr! Best thing you can do is get a new battery and put it on! Incase that one is dying!
@@Dominican3nito I have EZ DEBUG LED VGA how can I fix it I tried the following -
Resettling bios
Changing CMOS battery
Reinstalling ram
Reinstalling Graphics card
Cleaning ram gpu and PCIe slot
What should I do
@Clxtz yep my gt 1080ti died 😭😭 still didn't bought any GPU next month I will buy an rtx 3060 or maybe 3070
Thank you very much ! Removing the battery did the trick. Also i am going to update my BIOS.
Man you save my life i was wondering what happens if my bios is broken or my cpu pins are get damage but everything is fine i just remove the cell and watching your video after 15 sec i put that back in and everything work just fine thank you soooo much
U just saved my life bro. God bless ur soul
Thank you bro I was so stressed for a second you saved my life
Dube you dont know how much you just saved me
You da MAAAN!! GREAT vid! Worked for me ty a lot! +subs
Bro removing the battery worked for me. Thanks so much for the advice. I tried taking my whole computer apart and nothing worked
yo you the goat. i'll try to get that piece that u said, but ill swap the cpu into another computer for now and see if it works
Yessss let me know how it did!! Sorry for the late reply man but I hope it works
Ay what motherboard do u have
@@airflowway i use mpg z390 gaming plus
You should make more videos!! This was informative and funny
I will try brother! I seen a loooot of people needing help and most of the videos online are WAY too long haha so I will post more
Loving the jokes man, good to see a video with some humor. Cooking some eggs xD
Man Glad you enjoy it🤣 i just to make it as interesting as possible
Thank you very much, i reset the bios by removing the little battery, And everything is turn back fine thanks to you ♥️♥️ that white cpu light and fan's noise turned me crazy 😅
Dude thank you soo much I was so upset when my computer wouldn’t turn on thanks so so much bro.
Aye man glad I was able to help and welcome my 69th follower!! You are a LEGEND!!!
@@Dominican3nito ur a legend🤜🤛👍
Here is the solution if you are desperate and had tried everything. I solved it flashing the Bios via USB drive.
1. Download the latest BIOS file that matches your motherboard model from the MSI website.
2. Rename the BIOS file to MSI.ROM, and save it to the root of your USB flash drive. You need to format it using ´´Rufus´´ (IMPORTANT: MBR partition, non-bootable, Fat32).
3. Remove everything from the motherboard (cpu, gpu, hd, rams, etc) except the power cables.
3. Plug the USB flash drive that contains the MSI.ROM file into the Flash BIOS Port on the rear I/O panel.
5. Press the Flash BIOS Button to flash BIOS, and the LED starts flashing. This process will take about 5 minutes.
6. The LED will be turned off when the process is completed.
7. Turnoff and reinstall every component. You are done.
I love you bro 💙 i just fix it i was so anxious before
my system shutdowns and when i start it - CPU debug. if i keep it off and switch on--it works again. I have tomakawhk max and ryzen3200g.
i think the motherboard is the problem. shud I reset/upgrade bios or find options to return it?
My pc was working the night before and in the morning the cpu debug light just came on. I tried everything from 500 youtube videos except testing the cpu in another computer and nothing works. Help anyone?
My pc turns on for like 3-5 seconds but won’t stay on. Removed the motherboard battery and still have the same issue. Am I looking at a bad cpu?
Will MSI MAG 490Z TOMAHAWK work with a Intel i5-11600K? And should you plug in CPU-PWR1 and CPU-PWR2 to make it work or is just CPU-PWR1 required to start? My CPU LED is on directly at start and i got no signal to the display. Tried the battery thing too without success.
did you ever find a fix?? Im having the exact same error currently
My PC sometimes wont boot like when you hit the power button it just blink and gone, and sometime it stucks up at the CPU Led In ez debug. Although there are many times that it really boot up and stays up for long. Is the motherboard really the problem? 😬 Thanks man!
Same issues here. My pc is working fine BUT when I boot I have ez debug CPU or sometimes dram and nothing... I have to put it off and reboot and after some try it works. I think it's the Motherboard... Because I already change the alim and the ssd
@@dato6019 got the right thing to do bro, change the motherboard. It has a damage already, I got my new mobo and it's working fine now
I've the same problem. I bring my pc to the tecnical service and them update the BIOS because my motherboard wasn't prepared to read my Ryzen 5 5600x. You need your anterior CPU to update the BIOS for the new CPU, if you have change the motherboard. Sorry for my english xD.
I never know how tight to make my nzxt x72. Like hand tight or do you use a screw driver for the AIO cooler
Usually I do hand tight!! Just enough not to make it move but not too tight !!
i removed the gpu of my computer to try the built in graphics now im having this cpu debug light problem. i reinstalled the gpu . cleared the cmos and still having the same problem. what should i do. my specs is ryzen 3 2200g ,16gb ddr4 3200mhz ,1tb hdd ,240gb ssd , cv 550 psu
check to see if your cpu is faulty!! if you have someone you know with a built! try putting your cpu and if you get the cpu light on his pc then your cpu is faulty BUT if he boot up normally then your motherboard is faulty
Hey man love the vids I need help right so I took my ram out of my motherboard and put it back the exact way it came out and now my pc won't post and I'm get cpu and dram flashing on my ez debug... Plz sir how can I fix this
I got a real good one for you. I was doing some cable management and had to plug some things back in (they are all in the correct spot) when I turn my computer on CPU light turns on RAM flashes once GPU lights up and then boot. Then computer posts and everything seems to be working as it should. I reset bios and checked all my connections no reason for it but it happening
thank u so much bro i was so stressed
Bro thank you so much I honestly thought I'd bricked my cpu
Is it okay to turn off the system unit using the PSU switch? if the power button does not work my system is still turned on
My new msi b550 and Ryzen 5600g cpu not working detecting ez debug cpu led I reset the bios and updated the bios still facing the same issue but this happens only few times
any updates bro?
Now it's fine... I think I did not unplug the ups power cable after I shutdown the pc before... Now I unplugging after that it did not happen...
First
Haha welcome first personnnn😁✌🏽
@@Dominican3nito Congrats on almost 5k views in the last 30 days!
@@Dominican3nito You deserve more subs that me! I haven't uploaded in like a year and my content is No good! Your content is Amazing! All I gotta say is keep up the youtube grind!
@@diddlebrittle omg thank you so much man, I really appreciate it a loooot!! And you should post even if it takes you long 😭
@@diddlebrittle just take your time to write down what you want to do for your video and plenty of days to edit it!! You got thisss🙌🏽
Alright so this is going to be a good question. And I could really use your help I've been stressing. So I got lucky and won a pc in a giveaway. When it came in turns out the cooler got messed up and the CPU had some bent pins and caused the debug light under CPU to go on. I got a new CPU and replace it and thought that was going to work. I installed it and when I turn it on the debug lights show something random every time. At times CPU, vga , dram and boot are on and at times its just vga and then at time its just cpu , etc. Do you have any idea what the problem could be. Ive checked cables and the fans and the pc powers on just fine but just no display and random debug lights going off everytime I power on the pc. Sorry for the long comment
Okay since your cpu was vent it could possibly have affected the pins inside of the motherboard!! Next time you open it make sure they are enough burnt or vent too!!
plz help.. my pc is 4 months old... After running for few minutes my computer suddenly shuts down and red light starts flashing on ez debug cpu on motherboard. and sometimes windows starts automatically... 🥲
my pc specs:
MB- msi b450 tomahawk
CPU- ryzen 7 3700x
RAM- adata XPG gammix D30 ddr4 3000MHz 8gb×2
pls help
Ahh easy fix! Reset and update your motherboard Bios! Then update your drivers ! Also make sure the back of your pc cables are not touching the motherboard back plate!!
this doesn’t completely fix the issue. yeah, after reseting the cmos everything turns on but after a white my pc freezes even during idle and I have to hard reset it. when i try to boot it up, it gives me the dram led again
Bro im pretty scared right now about my computer and my cpu dont have warranty! My mobo is a b550m mortar non wifi and ryzen 7 3700x. It would show a light for cpu as it wouldnt boot and i checked if any pins were bent and they weren't the power was plugged in good. PLZ HELP! This is not a cheap build and im scared for my LIFE!!
my mobo asus b85 pro gamer have cpu led & sb power led are on. no display upon booting, no beeping sound too. please help.
So my pc works perfectly fine and everything, but everytime i turn on my pc, it cycles through all 4 of the red lights and then they go away, is that supposed to happen? id ask reddit but i have no idea how to use it
This happens to me as well, and I'm wondering if it's normal.
Yes this is pretty normal!! Is the motherboard checking for all components to be working properly !! You should be fine
Same thing happens with mine..is your PC still doing it and has it affected anything
@@aestheticaf7674 no i think it’s just power going to it. I’ve had my pc since i posted this and it works perfect. no overheating no ram problems or anything. pretty sure it’s just power going to the motherboard and it’s cycling through to see if there’s any problems. if it stays red there’s probably a problem tho.
@@immortalluke9860 mine goes away after like 5 seconds or so and runs perfectly ..makes so much sense thanks for replying
Hi pls I ve follow all your instructions and still the cpu led debug on
Acabo de instalarle una unidad m.2 nvme y despues de eso encendio el led rojo de cpu todas las luces rgb de la gpu y los ventiladores encienden pero no arranca, se apaga y vuelve a tratar de encender cada 5 segundos, que puede ser?
Bummer, recently purchased an MSI B560M Pro and I cannot get dual-channel functioning at all. Refuses to post if DIMMA1 is populated with any RAM; tested 2 brands, but to no avail. Time to return
Okay so you are going to have to reset the bios on your motherboard!
Install in ram to boot up, go to bios and then change the volts on your Ram slots to 1.4v ! Then shut off the system install the second RAM and it should work
Im ur 69th sub nice
Bruh it could be the psu also if you have a old or bad psu.
Ur cpu is messed up or ur mainboard is messed up ….. me who spend alot of money in that things: well…..fuck
I just built my first pc and everything seems to be working, I can stress test everything at 100% now, I bought a bad gpu off of eBay and that was causing my main problem with crashing in 3D games, I bought a cheap r5 240 which is working ok, it’s good enough until the gpu market settles down, anyways I still have one small problem, my cpu debug light flashes really quickly, like maybe a tenth of a second on shut down or when I put my pc into rest mode, is this my pc detecting something is wrong or is it just the board cutting power to the cpu? I have a gigabyte b450 m aorus and a ryzen 2600x
yes do not buy any gpu right now!! everything is over priced like hell!!!
TO answer your question!! you should be completely fine!! usually those lights flash when turning them on and shutting off!! so don't worry! if there was a real problem the light will stay on up until the system shuts off completely!
@@Dominican3nito alright good, I saw someone selling a used pc on mercari using the same board as I have and I reached out to him about it, he says his has done the same thing as mine out of the box and is working perfectly after over a year, and yeah definitely waiting on buying a gpu, I was worried about the lights cause I already had to rma my first board, it was completely dead, and now the gpu wasn’t working correctly, I was just waiting for something else to go wrong but everything is still working perfectly fine since I installed the r5 240, thanks for the help :)
Edit- my power supply is a game max 600 watt rgb psu, if I put my ear by it I can hear slight buzzing/humming, and since I built it there is a slight smell coming from it, I can only smell it with my nose right next to it though, from research it could be just coil whine and flux heating up, I just want someone to help confirm that for me, especially since my 770 was unstable, my r5 average wattage is like 35 watts, all from the pcie slot, I’m thinking about upgrading that too down the line even if it is rated almost 5 stars on Amazon
@@DementedApe ahh then your pc should be fine with that light on!! also I would check that psu to make sure is not being faulty!! its better to go with your gut feelings, take that psu out and see if you anything out of place!! it definitely shouldn't have any type of smoky smell
@@Dominican3nito online I’ve read that flux heating up could smell for months, putting a flashlight and shining it into the psu I can see a lot of flux/glue used on the coils, I’m thinking that is what it is but I’m not sure, I don’t have the money to upgrade right now but as long as it can last for a while I’ll be happy
@@DementedApe ahh thanks some good info to know!! i did not know that!! well now then you should keep watch on it to make sure it doesnt start a fire or end up damaging any component in case a short circuit!!!
either way anything i can help let me know
I had the CPU LED problem. I tried everything. I unplugged everything, plugged in thing at a time. LED off with one DDR4, BUT LED on with two DDR4. One on the DDR4 set dose not work.
Can I have your specs???
i have no clue what to do, cpu pins are fine everything is fine but it reboots and comes up with a red light for a sec
Same i have no idea whats wrong though
@@nextyzzzz neither I got a new cpu and mother board and it just does that so fucking annoying
@@nextyzzzz I think I got a solution, all you need to do is keep your temps low if ur poor like me just open the window and change your ram speed in the bios it worked for me I get no restarts now
every time you boot up and you see those lights comes it just means the computer is checking for any faulty components! you should be able to use the computer with no problems at all!!
@@Dominican3nito for me it was the bios it wasn’t updated 🤦♂️😂
I am using MSI b450 tomahawk max and ryzen 5 3600 CPU.
issue is i am not able to start my system with CPU installed .
I have tried with latest available version of MSI bios (11/10/2021) ...but still same problem.
I just got this problem. The VGA light is glowing white on the motherboard with no display. I have had this pc for 2 years with not a single problem. I went to sleep and woke up with this random issue. Thr whole pc turns on and glows including the gpu and the monitor turns on and says no signal. VGA light staying white. What do I do?
Check your SSD make sure you are connected for that white light there shouldn't be problems to run the pc, if you can get into the Bios update it and then download ne drives for your GPU
Hello! My pc is working fine on games BUT boot don't always works : I have 3/4 ez debug CPU or sometimes dram. But if the boot works all is okay I have great performance in games etc.. is the probleme my motherboard or my CPU? Thx
i have 3 light together Dram , vga , boot
Cheers bro
Been dealing with random restarts and shutdowns without blue screen errors and black screen and no display when computer is on. Was concerned that it was my GPU but though it wouldn’t make sense for it to be my GPU so I moved on the maybe the possibility of a faulty PSU and that’s where I’m at now. Throughout all the bs over the last few months it gradually got worse and the LED has been on but never did anything about it until now
Hey man, i've been dealing with the exact same problem. I've had my PC for about half a year, first 3 months it was fine, after that it just gradually got worse to the point where it would randomly shut down and restart around 5-6 times per day, especially if i play games. About the LED it was always on for me aswell but after i lifted a wire that was touching the motherboard the LED isn't constantly on anymore. It also seems to happen more when heavy electrical appliances (kitchen,washing machine etc) are working and it happens more during daytime and rarely during night time so it made me suspect a faulty PSU aswell. So did you find any fix for the problem?
Same problem guys. Did u fix it?
yeah i have a tomahawk and it has the cpu light on but sadly i cant check if its my cpu cause the 2 pcs in my house are amd boards
Hi! I’m wondering if it’s normal if my EZ Debug Led lights red on the CPU and VGA and Boot when the computer starts up but then turns off after a second and the computer srarts
Aye very sorry for the late reply but yes its very normal for your lights to go off like that and the shut off! Its just the pc running test but you should be fine!!
@@Dominican3nito thank you!
I’m a building my first pc I’m just waiting for my graphic card, once I turn on the pc just to know if everything is working fine the cpu light turn on and the others no, should I be worried about that ?
I love u sm
Hey I was setting up my second monitor but it didn’t have a vga port and my graphics card only has one hdmi and one vga port. I switched the vga to my main monitor and the hdmi to my second monitor when I did so my main monitor didn’t detect the cable and when I switched them back my vga white light went off unplugged and replugged everything and then my cpu white light is on. I’ve taken out the fan and taken out the cpu for 15 seconds no pins are bent but the light persists any tips?
Can I use a cap from a bottle to hold the jbat1 pins?
You could yes, anything thay is conductive will work
My Ryzon 5 6500 is showing up as a Debug on my Tomahawk Max 2, Anyone have a fix?
Hey man this just happened to me today and I've watched both this and the VGA video and I haven't been successful. Just built my first PC less than a week ago, and it's been running super great with not performance issues in-game. However, I was just doing some work on Google Docs today and my PC just had a stroke and hasn't been able to connect back to my monitors. The rig will still turn on, but my RGB LED fans will only display white, and the EZ DEBUG LEDs mostly stays on for the VGA but the CPU one comes on as well. They also sometimes are both on or will all go off completely for a bit. My GPU fan will start to spin and then stop and then start and it just keeps doing this. It's depressing me man I got so much school work I gotta do on my PC 😭
Also just to mention, I tried everything you've mentioned. Restarted the mobo, checked the pins on my CPU, reseated the GPU...I even took out my cable extensions so that I have my parts plugged directly to the PSU with the stock cables. Nothing's worked so far
The best solution for that is to Isolate everything!! Its a lot of work but best thing you can do !! Re-build everything and make sure NOTHING is touching the back of the motherboard, no cables, no metals no lose screws!!
When you have RAM and CPU on most likely your Motherboard is having a short circuit and it starts turning on and off!
I just built my new pc, cpu light is on the motherboard. I’ve tried everything and I can’t find a solution any help would be great.
Hi need help,, mine used to work for 1 yr straight but now, no display and ex debug light on... sometimes if i keep turn on and off for 20 mins, pc works and display shows. But next day i have to turn off and on for 20 mins again
Then check you motherboard bro!! If you tried anything I said on the video and the problem persist then your motherboard is the problem! Sorry for the late reply
@@Dominican3nito hi, i changed the mobo, it start at first, then no display again lol, could be ssd psu or gpu lol
@@frankiebe4818 try connecting the ssd properly and see whats up
@Lechuga Que honda bro quisiera que me ayudarás compre una cpu mod de laptop y grave una BIOS mod que me envió el vendedor al chip lo tuve que desoldar de la motherboard para programarlo prendí la PC pero me tira una luz roja marcando el cpu y se vuelve apagar además quite otro chip BIOS de backup para que solo quédara el Main BIOS pero no funciona ayúdame plissssssss
Hola perdona Por la repsuesta tarde!! Lo mejor que puedes hacer es hacerle un Flash al bios para que borre el mod que le purists! Despues hacerle una actualozacion al bios para que tu motherboard reconosca tu nuevo cpu!
i update my bios last version of msi b550 gaming edge wifi and now cpu debug light on and pc nor workimg i try to flashback but i pressed the button after 2 seconds pc turn on
Everything on my PC works fine but the light is still red. It doesn’t go away and I don’t know what’s wrong.
hi i have a problem. i built my pc and theirs an ez debug led on boot. all my fans are working but the rgb isn’t working. please help
Bro my pc is so messed before it would reset after i try downloading something big so i got a new powersupply but now it resets and shows ez debug white led for vga boot and cpu
its weird i get white cpu light when i shut off my computer sometimes and i fix it by unpluggin power for a few seconds. and then my pc works fine so theres nothing wrong wit my cpu
I’ve been trying to fix it but I can’t my PC will run for a while but then the screen go blank in the red light will turn on have any suggestions?
THX MAN!!
glad it worked out for you man!!
Dude my heart are stop beating
Haha lets get your heart beating again!! Tell me whats up?
@@Dominican3nito ohhhhhhh ohhhhh thankss mannn my pc izzz now ok im just remove my cmos Battery and wallahh the magical thing happen.
@@Dominican3nito thanks maaaannn thanks aaaa toonnn
@@rafiulhasanzahin4324 ayeeeeee i am glad it worked out man!! if anything else happends let me know i will try to help out
@@Dominican3nito love u brooh
i have a krait gaming z170a i am poor cant just go get another motherboard my cpu light is on i try different cpu and reset cmos still the same it wont post it was working before
Cook yo gd breakfast on the cpu! 🤣
I have 3 out of 4 lights (all but the ram) that turn on, but then turn off after a second or 2 and the computer runs, if I do the reset will it fix it?
In my pc
If led blink then working fine
But led not blinking
Led stuck anywhere and screen freeze after 2-3 min led automatically off and screen remain freeze
Any idea plzz tell me
Thanks so much my cpu port wasnt in all the way 😂
Not a hate comment but i tried your solution and it just made my problem worse
building a second pc that always has the cpu ez debug on even after replacing the motherboard, i even bought a new cpu that still wont work with the new motherboard i have tried almost everything and nothing works
I got the X570 Tomahawk... I turned my PC on, all fans are spinning, but the Monitor says "No Signal" and i dont get to the BIOS. Do you know what I should do? CPU Debug LED glows white.
Hey the B450 tomahawk have been having a lot of problem lately!!! Best bet is to re-seat the cpu! Change the paste, do a bios reset and then, Bios Flash!! But if your board still has warrantee then you might wanna change it for the new one
@@Dominican3nito I bought my X670 Tomahawk like 2 weeks ago lol
@@geneticallymodified7775 then you should be within warrantee!! might as well get yourself a new one
I have amd ryzen 9 3900x and I'm having the same problem.
I tried resetting bios cpu light still on and no monitor display
any updates bro???
@@maan_69 no i put my old motherboard back in too frustrated lol
90 % of the times my pc works normaly
But sometimes i get the ez debug cpu problem could it still be that one of the cpu pin got bended or just might be the bios?
When I boot up my PC, the led is on for about 25 seconds, and then it turns off and the computer works fine. Any idea what the problem is?
it is normal for pc to turn those lights on !! its just the computer checking for its components but you are fine!!
Same how is it stilling running perfectly ?
@@aestheticaf7674 yea funny problem, its just my cpu has no integrated graphics,LOL. So that means since u have no gpu u will have no signal on ur monitor
I ve just install the new bio from the msi dragon center my motherboard is msi Z490 gaming plus pls any advice I really need help
Hey man, I j got my motherboard repaired but it still gives a red cpu signal, also the cpu is not the problem bc I checked it in at micro center. I did all The steps u said but it doesn’t work.
Do u know what to do now?
after i play for a while everything connected to my pc turns off but my pc is still running adn after i turn off power supply and turn back on it works
Please help I try everything led red light on monitor no signal but other things are working
Putting all the parts together with new ssd but all the lights come on expect like a white flashing lights so what is the problem?
Foes your computer boots up ? Also which light is it flashing white ? Depending on the one you most likely have a defected power supply or motherboard is acting up!
My pc works fine but I still have a red light on
It was working fine for a long time then suddenly cpu debug led comes up my cpu temp was always around 60 C
mines on but my pc working fine it doesnt bother me should i just leave it
I did all this steps and I cant get the pc to boot up. no Bios manu just a black screen .this happen after a bios update. i have the CPU light on but CPU loos great. my pc was working fine for months just that dumm update. cant reset the bio by doing this.
Hey I did the cmom in the motherboard and it work how do one undated the bios on a new pc with a os on the usb
Thx bro I fixed it
Good to hear
For the white cpu lights is on, all the rgb, fans, gpu, works , but the display doesn't get any signal and the periphwrals ( keyboard and mouse) don't work as well.... i'm kind of lost tight now
Same
Same
Bro me too
Update: found out it was a motherboard issue
For the display check if your SSD is disconnected from your cable in the motherboard or drive, for peripherals ! Check your motherboard at the bottom right you should see couple of pins! Make sure those are plug in or the cables is properly working !
@@Tofu69 I’ve got the same problem. I have a constant white led light where it says cpu. Should I get a new motherboard?
I have a z490MSI mpg gaming plus Mobo and Intel i7 10700k i just built the pc but nothing turns on all I get in the ez debug led flickering white under cpu but i checked the cpu and pins and they look fine , the fans want to spin but don't spin and it doesn't power on at all besides the led flickering white any help
Go to the subreddit for pc building, there's a lot more people on there to help you than on here
Help! My pc wont display on the monitor, it say no signal. Doesnt detect my keyboard also. I think my cpu is messed up cause it might be that i f*cked up when overclocking it one time. Will it affect the motherboard? (Its a b450m mortar max). Also im using a athlon 3000g.
pc turns on, cpu light is on for 10 seconds, vga light for 30 and then it boots. How can I fix this
I had this problem two weeks ago and I solved, the problem was the motherboard, i had to buy a new one.
My cpu debug light turns on sometimes omly after restart. ? Any solution for this