Видео

You have a good sense of humor! I think you could become quite successful if your audio issues were fixed. My two suggestions: 1. Maybe do only voiceover? Plan what you are going to say in advance, then dub it in with voiceover after the fact. 2. Find some royalty-free music to put in the background for some parts, like for example when you sped up through the process of chopping onions. A little bit of music, or more dubbed over audio, would do a world of good for your videos. Finally, I want to suggest that you look at FutureCanoe's videos for some examples of how he does voiceover and audio, because he has a similar sense of humor to you and I think you would be making similar content (I think that's a good thing!). Excited to watch your channel grow and improve over time!

you aren't supposed to hold a lavelier mic in your hand, the clip is for clipping it to your shirt. your audio sounds like shit because that mic is not meant to be held an in from your mouth. the microphone has to compensate for the loud input which it's not expecting

i had it plugged in, but all i did was switched the 8 and 6 pin location and it worked WTF ahahahahahahah

If you used English subtitles, we could understand you. What exactly are you doing, can you write it as an explanation in the comments?

My pc was working the night before and in the morning the cpu debug light just came on. I tried everything from 500 youtube videos except testing the cpu in another computer and nothing works. Help anyone?

Thank you for the video! 3 years later, still saving bacon.

Only thing I have tried yet. Will update if it works.

So tested my gpu in other PC. Works! Cleaned the dust off the motherboard. Removed the battery, now I need to do all the other stuff will update this if it boots.

So after trying everything and being on verge of desperation; by everything i mean i even dismantled the PSU to check every wire if it has a snapped or if any pins are bent etc. Anyway i ended up put up everything back together allthough i knew there was no way that would have done anything.Long story short i pushed the power button and magic happened; my pc booted up in safe mode all by its self.After numerous restarts and a lot of confusion i was left only with question marks becouse i literally did tried everything,none of it seemed to work but then once i was about to accept my fate and take the loss, my PC decided to boot up normaly like nothing has happened. So guys i guess the answer to our verry problem is desperation?! Like my PC hates me or something?! I am so confused.

My msi x470 gaming pro ez debug light on ram so how can i fix it

I got the same stuff out of the blue today on my MSI X470 Gaming Plus mobo.. I have a NVidia RTX 2070 SUPER video card in it and it gives no beeps when inserted but a black screen. So I removed that video card and it gives the VGA light error and the 1x long and 2x short beeps (which is weird, because my mobo has an onboard video card).... Removing the battery/clear cmos button looks like doing nothing.. What could be the cause here? Nvidia card seems te be working (fans spinning)...? Help!!

i update my bios last version of msi b550 gaming edge wifi and now cpu debug light on and pc nor workimg i try to flashback but i pressed the button after 2 seconds pc turn on

Here is the solution if you are desperate and had tried everything. I solved it flashing the Bios via USB drive. 1. Download the latest BIOS file that matches your motherboard model from the MSI website. 2. Rename the BIOS file to MSI.ROM, and save it to the root of your USB flash drive. You need to format it using ´´Rufus´´ (IMPORTANT: MBR partition, non-bootable, Fat32). 3. Remove everything from the motherboard (cpu, gpu, hd, rams, etc) except the power cables. 3. Plug the USB flash drive that contains the MSI.ROM file into the Flash BIOS Port on the rear I/O panel. 5. Press the Flash BIOS Button to flash BIOS, and the LED starts flashing. This process will take about 5 minutes. 6. The LED will be turned off when the process is completed. 7. Turnoff and reinstall every component. You are done.

Here is the solution if you are desperate and had tried everything. I solved it flashing the Bios via USB drive. 1. Download the latest BIOS file that matches your motherboard model from the MSI website. 2. Rename the BIOS file to MSI.ROM, and save it to the root of your USB flash drive. You need to format it using ´´Rufus´´ (IMPORTANT: MBR partition, non-bootable, Fat32). 3. Remove everything from the motherboard (cpu, gpu, hd, rams, etc) except the power cables. 3. Plug the USB flash drive that contains the MSI.ROM file into the Flash BIOS Port on the rear I/O panel. 5. Press the Flash BIOS Button to flash BIOS, and the LED starts flashing. This process will take about 5 minutes. 6. The LED will be turned off when the process is completed. 7. Turnoff and reinstall every component. You are done.

Hey man, I j got my motherboard repaired but it still gives a red cpu signal, also the cpu is not the problem bc I checked it in at micro center. I did all The steps u said but it doesn’t work.

Can you help me beacouse my motherbord vram and cpu blinking light. But not show on bio i did many time ram swap and 1 and 2 slot and still same

Can you help me beacouse my motherbord vram and cpu blinking light. But not show on bio i did many time ram swap and 1 and 2 slot and still same

having the same issue rn, i dont think its the cable since if i press the reset button on the case i am able to turn it on, but if i press the power on button i get the VGA LED,

You can use whichever pcix slot you want, but usually only slot 1 is 16x. Bad information dude. Keep working on learning more maybe before you make youtube videos.

oh my…….

My pc works fine but I still have a red light on

yeah i have a tomahawk and it has the cpu light on but sadly i cant check if its my cpu cause the 2 pcs in my house are amd boards

What i did, and what worked: Cleaned ram stick. Changed ram slot. Cmos reset by removing battery. Cry. After doing all this nothing happened, so after 2 days the repair guy came but, it was fixed and i was like damn. So my advice, do the things i mentioned and then check. If nothing happens keep checking after sometime and don't be like me who wasted 2.5 days for nothing.

I tried resetting bios cpu light still on and no monitor display

Hey I got 4 debugging right then i turn it off on turns on cpu then it turns back to 4 the 4 is boot vga dram something else forgot but not cpu it never worked before also ik the power supply works I updated bios 4x and cleared it

90 % of the times my pc works normaly But sometimes i get the ez debug cpu problem could it still be that one of the cpu pin got bended or just might be the bios?

My pc seems to be working perfectly. Everything seems to be running even GPU fans but there is no display. I’ve reset cmos countless times. Ive notice on the side it seems like the DRAM is either flashing or solid white. Pc still charges and everything but i can’t seem to get a display even though i swear everything was working What’s the solution?

I upgraded my w10 version into w11 and after downloaded drivers and restart my pc i have this problem, tried reset BIOS, reset cmos, trying ram on other slot, removing the gpu, removing the battery, replace the paste on cpu, using hdmi instead of dp port cable, literally everything but still nothing fixed 😭

My new msi b550 and Ryzen 5600g cpu not working detecting ez debug cpu led I reset the bios and updated the bios still facing the same issue but this happens only few times

I’ve been trying to fix it but I can’t my PC will run for a while but then the screen go blank in the red light will turn on have any suggestions?

Hey man the vga light turns on sometimes when I boot my pc up, but it displays picture on my monitor with no screen tear, there's nothing wrong with my gpu that I know of, I've installed it correctly and it still goes on

Not a hate comment but i tried your solution and it just made my problem worse

Can I use a cap from a bottle to hold the jbat1 pins?

I did all this steps and I cant get the pc to boot up. no Bios manu just a black screen .this happen after a bios update. i have the CPU light on but CPU loos great. my pc was working fine for months just that dumm update. cant reset the bio by doing this.

Hi Where do you fit the case speaker on tge z390 gaming plus motherboard. Cheers

Yo thanks so much my man really helped my out in a pinch

Ur cpu is messed up or ur mainboard is messed up ….. me who spend alot of money in that things: well…..fuck

I just built my custom pc and it won't display anything it also has the red light on the ez debug led on dram and idk what to do

Hey dude this matter repeated a couple of times so i did saw you video multiple times throw a year back and this is the third time for the same from and this nothing seems to work but the problem is i know that everything is ok but nothing of the tricks works with me

I love you bro 💙 i just fix it i was so anxious before

GBA light?

after i play for a while everything connected to my pc turns off but my pc is still running adn after i turn off power supply and turn back on it works

Thanks so much my cpu port wasnt in all the way 😂

Bro thank you so much I honestly thought I'd bricked my cpu

i have a krait gaming z170a i am poor cant just go get another motherboard my cpu light is on i try different cpu and reset cmos still the same it wont post it was working before

I am having the dram light on red and the display says no signal what should i do

I've the same problem. I bring my pc to the tecnical service and them update the BIOS because my motherboard wasn't prepared to read my Ryzen 5 5600x. You need your anterior CPU to update the BIOS for the new CPU, if you have change the motherboard. Sorry for my english xD.

I’m a building my first pc I’m just waiting for my graphic card, once I turn on the pc just to know if everything is working fine the cpu light turn on and the others no, should I be worried about that ?

I got a real good one for you. I was doing some cable management and had to plug some things back in (they are all in the correct spot) when I turn my computer on CPU light turns on RAM flashes once GPU lights up and then boot. Then computer posts and everything seems to be working as it should. I reset bios and checked all my connections no reason for it but it happening

thank u so much bro i was so stressed