S&W Bodyguard vs.Ruger LCR .38 Revolvers
HTML-код
- Опубликовано: 11 окт 2024
- We compare the Smith Wesson Bodyguard vs.Ruger LCR 38 Revolvers
-------------------------------------
Gun Websites.com is the hub of all our projects.
Keep up to date, join our newsletter
GunWebsites.com
----------------------------------
Gun Channels in an online community for shooters, built by Gun Websites. Anyone can join. Talk about guns, Watch Firearms Content, Ask & Answer Gun Questions.
Check it out
www.GunChannels...
----------------------------------
Support our efforts online, check out our Firearm Playing Cards, Custom Patches & Stickers
Our online store is Gear Websites
GearWebsites.com
---------------------------------
Check out all our projects on Patreon
/ gunwebsites
---------------------------------
We encourage you to Take a CCW Class Every Year, Practice Every Month, and Carry Every Day
Thank you for watching Gun Websites !!
I've had two of the Bodyguards (still have one) and the first thing I did with both is change the grips to the Hogue Tamer grips. Makes it MUCH easier to hold and more controllable and pleasant to shoot.
Use standard picture ratio so all your reviews arent visually distorted
My mother got the S&W BodyGuard with the laser 38 and my wife got the Ruger LCR 38. I found the ruger was tighter but both do what they're made to.
@Riflemanm16a2
Yup thick grips can be an issue on any small frame revolver though, just depends
I own both. I gave the Smith to my mother and the Ruger to my wife. they both love their .38s. I owned the new Taurus polymer 357 snub and HATED it.
why ??
Thank you. I'm going to look at both.
I got both ... I took out the Kel-Tec P-11, the M&P bodyguard with the crimson trace, and the LCR. The Bodyguard is brutal on the hands and jumps hard when the hammer falls, the Kel-Tec is inaccurate and slightly less brutal, the LCR is hard on the hands but nothing compared to the M&P - and with the smoother trigger and softer grips, it tends to be easier to be accurate with then either of the other two. I wouldn't want to put 50 through the bodyguard in one sitting that's for sure.
Big dot for close up works fine and doesn't give you away like a nice bright laser.
That's a good point about the button on the laser, in a "tactical" situation, you probably wouldn't have time to push that button with your thumb.
@bratcher71
I thought the same but there was a drastic (noticeable) difference in recoil on the Ruger LCR
I only own the LCR, (and I like it better)
I like them both, both S&W and Ruger are both great gun manufacturers. I only own a S&W but have shot many Rugers, and plan on getting a Ruger LCR for my next gun.
@speedwaypinoy
yup like "bean" said, just a thing that wouldn't fit in there with bullets, so you can easily see it's empty.. many new revolvers ship with something like that
I just picked one up and shot it today. It exceeded my expectations.
Didn't get the metals right on the ruger, but still a good comparison. For anyone that wants to know, the ruger frames are aluminum on the 22 and .38, and stainless on the .357. All three have stainless cylinders :)
@MrINVADER727
Sorry I don't think I know anyone who owns one. But I'll keep an eye out at the range and see what I can do if I see one. Thanks for the request
@VideoLobby Depends on how you align the laser with your point of impact. Yes, you have to go to the range and shoot the gun and then align the laser to point of impact. At that distance, the laser would be on target. At different distances, the laser will begin to drift off of point of impact.
I put the Hogue grip on my bodyguard and now love it even more then my LCR. And I like the ambi cylinder release on the bodyguard better. thanks for the video.
Great comparison. Can't wait to hear your thoughts after firing the S&W.
Very good vivdeo! It help'ed me on the research I'm doing on the S&W, The grip on the bodyguard is what concerns me.
Very well done! I love revolvers and these are two great ones. I was amazed at the light recoil on the Ruger LCR. The grips and the design is very well done. I am looking forward to the .357 LCR. It should be awesome. Thanks.
The Ruger works for me. I love this pistol.
@dp665
Yup, we have a few videos of them from early May at the NRA convention
Dude I own a S&W bodyguard and it fires lovely, can't speak on behalf on the ruger but the bodyguard very nice.
Gabriel Ramonett n
Junk, trigger to hard, can't change spring
@cbond99
yea, over 2000 videos and you hardly hear a price on any of them.. we aren't a catalog
I really enjoyed this vid. I have been looking to purchase my first gun and have been vacillating between these two. I still haven't decided but now I have more info, so I won't look totally ignorant when I step up to the counter. Thank you!
I bought a new 38 special bodyguard, what I really hate about it is that it has at least a 10 or 11 pound trigger pull on it. It, sucks, not like the j frame, they don't make a weaker trigger spring for it. I hate it.
@cbond99 no problem, I've been looking at a pocket revolver for awhile and these two are popular. The LCR does have a .357 version thats about $435 at buds and a regular .38 but with XS front big dot and houge rubber grup for $429 I believe.
@Tanker19kilo1
I know what your saying Tanker but if you stop and think it is nice to have a weapon that gives you the option of having the ability to fire both the .357 and the .38 & .38+P, which is what I would use in the LCR .357.
Good point...in addition a gun design for .357 is a stronger firearm...if you want to shoot .38 or .38+P,...help yourself as it can handle.357 no problem. For .357 500+ foot lbs is a mild load and they exceed 700+ ft lbs...try that in your 9MM.
@Mr45Bullitt
These light revolvers might be just thing for ya when riding the bike !!
I have heard the thick grips on the LCR have caused ejection problems or speed loader problems (can't remember which). I know it depends on the grips, but have you noticed this? I ask because you mentioned the ejectors.
Good comparison; I like all the close ups. Can't wait for the shooting vid.
@GunsKnivesSurvival
Thanks
Getting into an "argument" with you is a laughable concept, it would be the same as arguing with my cat
Two comments. dont buy either of these!!!! Instead buy the 442 Smith and add a CT laser and spend the other 100+ bucks and be MUCH happier. On the LCR skip right to the 357 model and shoot 38P ammo in it and replace the factory grip with a compact CT grip. In fact buy the compact CT grips always. It feels and conceals much better. Both of the solutions I mention beat these two guns by a long shot but dont cost much more. The lasers on the bodyguards are total crap.
@emmy1cat true I have some ex Navy friends and they prob feel the same. Laser is very nice I feel for target acquisition. More often I would think someone will be using in self defense so their target will be facing them anyway
@JPBill2
sure
LOVE the review! I love it because you've clearly stated preferences and opinions! Thanks man.
I'd pick the Ruger LCR.
I have the357 version. Love it
No, this is not a perfect review, but, dang, you give a lot of practical information, good display so you can see perspective -- who needs perfect. Very grateful for your good work here. Keep it up!
Both are nice and very good at what they do, but the S&W Bodyguard is what i chose. I like the lazar option and the Hogue grip i put on it.
Nice review/comparison...The LCR has been on my "to get" list and looks like I'd still perfer it over the Bodyguard. Keep up the great vids!
@higherlearning141 A good grip can reduce felt recoil, making for a faster follow up shot. Which is good if your first shot fails to stop the aggressor.
@jdhp45toy
Ruger is all I have real experience with and I like it's laser, so LCR w/ laser
@Tanker19kilo1
It's very simple. 158gr +P shoots amazingly well in the 357 model and for less than 50 bucks you get a stronger gun and stainless steel upper frame.
I like them both, but I think the LCR will be my gun of choice as a BUG. I don't think I'll use a laser nor do i think the plunger length will be a factor for me. I like the lighter weight and the ergos on the LCR. I must say the S&W is prettier though.
@Zombilis you wont look ignorant, everyone who works at a gunstore is a gun nut and will be more than happy to help you out.
Great review.
@Tanker19kilo1
I think red cars are stupid.. but they make them too..
The Ruger looks a little easier to conceal,however the S&W looks a little easier to control.I also like the looks of the S&W and the trigger gaurd a lot better,but I havn't held the LCR yet. Like you said in the other vid,i don't like the ergo's of the S&W's laser. My wife is looking at the Bodygaurd line .380 also. What would you refer a woman to ccw on a daily basis of the 3?
Were you able/willing to dry fire them? Smith usually gets the nod when it comes to fit and finish, but I've heard Ruger did a really good job on the LCR's trigger, and with them both being polymer, maybe the differences aren't quite as noticeable? It's nice to see some more options in the lightweight revolver category. Too bad they aren't a little cheaper, or I'd probably own one by now. That's the case with most guns though, I guess.
I bought a Taurus Model 85 Ultra-lite .38. (It weighs in at ~17 oz depending on the grip you have)
Any comments on that revolver?
I haven't had a chance to shoot it yet, but I plan on a trip to the range within the next week...
Great review!
I've heard about some reliability issues with the Bodyguard.... any insights?
Nothing wrong with Ruger. They just don't have the re-sale value of a similar Smith or Colt product. Same thing with Taurus. They are all "good enough", but you DO get what you pay for. The next level down would include Rossi, which is owned by Taurus. Good stuff, but with a little less finesse in the overall quality than Taurus. The least level weapon that I would own would be a Charter Arms product. They get the job done, but there IS a difference in Scotch, so to speak.
When I tried the lazer on the smith, I didn't like the button at all. I concider it a worthless pain in the rear to have on the gun. The LCR's lazer grip works great. But I wouldn't have it because the grips just don't feel near as good as the standard ones do. Plus the lazer cost over 200 dollars more.
based on the bore axis height, the Smith offers a lower kick leverage. ruger barrel sits higher. one video at range showed this, the users preferred the smith over the ruger as better to shoot.
What kind of accuracy are you getting out of that LCR at typical short-barrel revolver ranges, say 7 - 10 yards? My much larger and heavier Ruger GP-100 will make 3" groups at 10 yards using .38 Special or .357 Mag. ammo. I've never owned a short-barreled, DAO revolver, and just want to know what to expect.
How do the triggers compare?
Nice comparison. I'm curious if the new Bodyguard can hold up to the j frame legacy. Do you have any idea why S&W named it "Bodyguard" when the Airweight version has been out since the fifties?
very nice revolvers
I hate it when I'm almost about to buy a gun and then a report pops up about a problem with that gun. Like the LCR that blew up.
Looks like its true that a single "shark sighting" can ruin the summer :(
After this video I am getting a Ruger LCR
It all comes down to how it feels in the hand. These are both great Ccw. Check out my review of the lcr. Thanks
I'm walking out with a Bodyguard, LCR II or a S&W 642/442 this weekend but im stilll not sure which, honestl it might be whichever one is the cheapest but right now the Bodyguard is the one I favor, feels good int he hand, I can put Hogue grips on it for cheap $15 and I love the feel of those grips /w hogue on them, so...Also the trigger feels better on the Bodyguard than the ruger LCR II does (though a lot of people say the opposite), and imo the 442/642 and bodyguard seem a tad lighter and thinner. I like having the laser for dry-fire practice and range practice, I like the ambi-release on the bodyguard....but I also enjoy the 442/642 esp the 642 i nstainless, and I've never had a Ruger go bad on me so....it's really almost an "eeny-meeny-miny-moe" (except at the end I think the laser might niche it, I know I can add one to the others but that one's already there and mounted, so...)
Joe Cannabyte czussssdtess
@cbond99 both are priced close, buds has the BG at $429 and LCR at $398....
@xxandyxx300
You shouldn't trust your feelings since that couldn't be further from the truth
sounds like you made your mind up before u fired. the smiths grip is made where u hold it higher = less ramping up of the barrel when firing
great review and info
whats that yellow pastic circle on the ruger cylinder?
it looked removed when u opened the cylinder
Can you also compare the Charter Arms Crimson Off Duty?
I dont really like Ruger's cylinder release button...always seemed funny to me
@Tanker
I can see not wanting to PAY the extra $ to get a 357 over 38sp. But, if money were no object, I had rather have the 357. It cud be loaded w/ the first rounds in 38sp & the last in 357. The 357 shud have more velocity & foot-pounds. Of course both the 357 & the 38sp shud have more w/ a longer barrel. Wud not a revolver be harder to carry in the pocket than a semi-auto?
Think i like that bodyguard. In fact i think im going to get one, nice video.
And that must be why we see so many 8" .357 Magnums around...
@GTILOUD
Navy taught me years ago, never ring the bell of someone you intend to shoot. Its a dirty game, never fight fair. Only suckers have honor in battle.
Hello! Please Polymer revolvers these are really reliable and sufficient for self defense? Thank you.
if you could please do a review of a bushmaster m4a3 carbine
you say at or around 9 16 that the smith has a longer ejection rod. That it makes a big difference. You didn't give credit to the standard length or the longer length as being better. I"d like your opinion and why please.
@speedwaypinoy It verify's the that gun is unloaded.
I heard that the laser points like 3 feet away from where the bullet will it. Is that true? PLEASE ANSWER!
@speedwaypinoy i thinks its a lock so you cant put bullets in but im not sure
i hope S&W makes a .357 bodygaurd
Awesome
How does one open the cylinder on the S&W revolver here? There is no cylinder latch.
i think i like the ruger more than the s&w in this case
what is that yellow thing in the rear of the cylinder?
I don't think that I'd give my 638 up for either one of them.
@abuklashinkov
LOL
@1988sureshot I have yet to hear something bad with reliability with M&P's....what have you been hearing?
lcr has a higher bore axis.
What is the MSRP on the smith & wesson?
what kinda grip is that on the LCR?
what does the lc in lcr stand for i know the r has to be revolver and the lcp the p is the pistol lol
LCR .38+P IS A PITA TO SHOOT. IT WANTS TO JUMP OUT OF YOUR HAND. IT MIGHT EVEN BE JUST AS BAD AS THE GLOCK-23 .40 CAL.
I thought your review was helpful, thanks!
S&W FTW
is the smith rated plus p
Gee , do you think the 1 once differnce might be due to the S&W having a laser unit and battery???? And what the heck is with saying front heavy instead of muzzle heavy, not to mention top lever and not the correct term cylinder release. No actual measurements and no actual range report......
@emmy1cat give you away? You trying to shoot someone unannounced?
@CampingestBoyAlive Consult your state's gun laws. Then consult your university's rules concerning firearms.