Thanks for the instruction. Q- G430 12deg - if I use -1.5 it opens the face as you inform. That would take it down to 10.5 with a more open face. If I bought a standard 10.5 deg would the face be as open….
Ah yeah, I'm glad I got that bit across :D common thing that happens across the board with Ping, I think it's just a little vacuum the rubber washer creates
+1 Flat should promote the right side but on a higher loft ....I find the -lofts the easiest to hang the ball to the right (and +lofts often easier to draw) so you may be better going for the standard flat setting if the -flat is too far 😋 [hope that makes sense]
@@FredzGolf I hit a mid flight draw, that can become a hook, so looking for a higher launch too, I think if I understand correctly then +1 would be worth a try
Yes, you can indeed ... It's a lot more fiddly, have to remove the adapter from the shaft and then reattach the adapter in the orientation you desire May need the help of a club builder or golf shop if they have the means to do so ...most shops around here send those people to me haha
I'd say, make sure it's the right shaft tip for the head ....so if it's been on already, you're fine Secondly, male sure it's lined up, maybe want to put pressure down so the shaft doesn't twist while being tightened Thirdly, is it the right tool? If so ....keep tightening, they have a torque Wrench type system so they won't over tighten ....go for it if 1 and 2 are good 😁
It's been that way for a long time but some brands are stopping that! I think Taylormade said they aren't as most people have one already (can use any brands tool) and the reduction in [cost] plastic use!
Ah yes that can happen ....if you put it on the screw while it's out then put the screw in ...just reduces metal on metal wear n tear Not that I've seen the wear n tear do any damage or anything!
@@flex_flex6988 ahhhh OK... the one that's supposed to stop the screw falling out 🤭 If you still have it ..you can balance it on the tip while lowering the head to it and screw in ..bit tricky!!
Thank you for the stuck head tip and flat setting explanation! This video saved me from frustration.
Glad I could help!! Saved it from being smashed against a wall :)
Beautiful! I came here for the stuck head as well. All good now!
Yaaaaaayyyyy glad I could help 🙂
Thanks for the instruction. Q- G430 12deg - if I use -1.5 it opens the face as you inform. That would take it down to 10.5 with a more open face. If I bought a standard 10.5 deg would the face be as open….
No, it would be "squarer" .....the 3rd way would be a 9⁰ Head on +1.5⁰ to get more closed 😎
My Lord stuck head problem solved! Gotta love this dude😮
Yeeeeaahhhhhh nice ....glad I could help 😁 so annoying that happens but it's not your fault haha
Thanks for the tip about the club head getting stuck ! For one horrible moment I thought I brought a fake 😂 all good now 😊
Ah yeah, I'm glad I got that bit across :D common thing that happens across the board with Ping, I think it's just a little vacuum the rubber washer creates
Same here, thanks for this tip
@@kappa1032 tip tips are the best tips
Excelente!! Compré una cabeza de driver G430. cuál es el adaptador correcto? Tiene una medida? Muchas gracias!!
😁
Good job i found this as i couldn't get the head off my 430 3w. Cheers ✌️
Common thing 😋 glad I could help!!
Is this a silly question but on the 425max I'm wanting to promote a fade bias in the flat setting...that setting should be +1 right?
+1 Flat should promote the right side but on a higher loft ....I find the -lofts the easiest to hang the ball to the right (and +lofts often easier to draw) so you may be better going for the standard flat setting if the -flat is too far 😋 [hope that makes sense]
@@FredzGolf I hit a mid flight draw, that can become a hook, so looking for a higher launch too, I think if I understand correctly then +1 would be worth a try
@@patrickobrien9481 indeed, that makes sense ....+1 on the flatter side of the adapter 👌
@@FredzGolf appreciate the advice 👌 subscribed 👍
@@patrickobrien9481 thank you 😁
Can I remove the 430 adapter from shaft , and turn to line up better with shaft logo?
Yes, you can indeed ... It's a lot more fiddly, have to remove the adapter from the shaft and then reattach the adapter in the orientation you desire
May need the help of a club builder or golf shop if they have the means to do so ...most shops around here send those people to me haha
Yeah it seems would need special tool to remove and reinstall in orientation I want 😩 thanks
Easier changing the grip 🤷
My G430 hybrid toe is up in air and I’m hitting it left , I don’t understand how to change lie angle
Opposite side to standard should do the trick!
Excellent video. 👍🏼
Thanks Teddy 👌 thought these might sit in the archives and help people long term 😎
So you can take a 10.5 degree and make it 11 or 11.5 degree?
Yes indeed :) have a tinker but remember where you started in case it needs to go back :)
Why when I tighten my head won’t it click?
I'd say, make sure it's the right shaft tip for the head ....so if it's been on already, you're fine
Secondly, male sure it's lined up, maybe want to put pressure down so the shaft doesn't twist while being tightened
Thirdly, is it the right tool? If so ....keep tightening, they have a torque Wrench type system so they won't over tighten ....go for it if 1 and 2 are good 😁
Was I supposed to get a tool with my driver?
It's been that way for a long time but some brands are stopping that! I think Taylormade said they aren't as most people have one already (can use any brands tool) and the reduction in [cost] plastic use!
@@FredzGolf I just bought the Ping G430 max but no tool. Didn’t know if they forgot to give it to me or if I should go back
@@jimbof20able Hmmmm yeah they may have forgot! Most places should have loads spare in any case, where did you get it from?
@@FredzGolf Dicks
A little white washer fell out of my Ping G425 when I did this, where does it go?
Ah yes that can happen ....if you put it on the screw while it's out then put the screw in ...just reduces metal on metal wear n tear
Not that I've seen the wear n tear do any damage or anything!
No.. the washer go’s inside in between the driver bottom hole & shaft point
@@flex_flex6988 ahhhh OK... the one that's supposed to stop the screw falling out 🤭
If you still have it ..you can balance it on the tip while lowering the head to it and screw in ..bit tricky!!
aaaah, so that is what the flat setting is for
Aha ...yes 😁 some have upright like taylormade and cobra ....some have flat like Srixon, PXG and Ping!
SOOOO HELPFUL TO GET HEAD OFF!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Happens so often with the Ping adapter!