A suggestion, if your driver head is stuck on shaft simple hold the club by the head at a 45* angle to the ground. Now simply tap the end of the shaft on the ground. This will free up the head and it can now easily be removed. You’re welcome. lol It really does work. DON’T try to force it.
Useful to show how to get club head off shaft. Ping heads often stick to shaft and is difficult to get off. After research and doing this myself I have found that after taking screw out you then knock head gently against shoe on foot while holding shaft. Do this a few times it will do it
A suggestion, if your driver head is stuck on shaft simple hold the club by the head at a 45* angle to the ground. Now simply tap the end of the shaft on the ground. This will free up the head and it can now easily be removed. You’re welcome. lol It really does work. DON’T try to force it.
In STEP 3, is that click from the "PING Wrench" like a torque wrench of sorts, or from the screw in the head itself? I have a Ping G430 but they store just gave me a Cobra wrench which works but does not have feature like a torque wrench. I don't want to strip the screw. Thanks
PING ..must be THE all Champion of SHORT 🐥🐥🐥 Cuz’ the G.D. thing only goes FLATTER the more you go either direction out of neutral. - At least flipping a Taylormade 180* will help a little from slicing a ball. - So/But.. in my humble opinion, if you truly want a better adjustability.. here’s the deal. 4.) PING = Meh 🫤 3.) TaylorMade 🥉 2.) Callaway 🥈 1.) Titleist 🥇 🏆 🛎️ DingDingDing:)
Answer … only make it worse. Ping (imho) are only for shorter humans who aim down the left side of fairways 🤷♂️ PING ..must be THE all Champion of SHORT 🐥🐥🐥 Cuz’ the G.D. thing only goes FLATTER the more you go either direction out of neutral. - At least flipping a Taylormade 180* will help a little from slicing a ball. - So/But.. in my humble opinion, if you truly want a better adjustability.. here’s the deal. 4.) PING = Meh 🫤 3.) TaylorMade 🥉 2.) Callaway 🥈 1.) Titleist 🥇 🏆 🛎️ DingDingDing:)
How does the wrong-handed loft sleeve work in relation to face angle? If I'm a righty, can I use a LH loft sleeve to increase loft and open the face at the same time?
I doubt it.. Cuz’ the neutral setting even in a LH tip.. still is the most upRite lie angle. Just go w’ a Titleist SureFit chart (Google it:) And trade that Ping for any same or newer Titleist Driver. You’ll have every advantage and adjustment in the World:)
One thing you didn't mention is how flat the club is in the flat settings. Correct me if I'm wrong but I believe the F as you have it labeled is 3 degrees flat and the other 2 settings of F- and F+ are 2 degrees flat.
I am a right hander and I hit a fade. I set my 9 degrees G430 to flat minus (for a lower trajectory since my previous driver was an 8.5 degree) and I am satisfied with the ball flight.
@@2ndswingif he was a right handed that hits a fade wouldn’t setting the club to a flat minus cause even more of a fade or slice? That’s what I gathered from the video
Flat means increased ↗️ weak and RIGHT of a righty. Do yourself a huge favor and look 👀 a SureFit chart (Google images) for a Titleist ❣️ PING ..must be THE all Champion of SHORT 🐥🐥🐥 Cuz’ the G.D. thing only goes FLATTER the more you go either direction out of neutral. - At least flipping a Taylormade 180* will help a little from slicing a ball. - So/But.. in my humble opinion, if you truly want a better adjustability.. here’s the deal. 4.) PING = Meh 🫤 3.) TaylorMade 🥉 2.) Callaway 🥈 1.) Titleist 🥇 🏆 🛎️ DingDingDing:)
Note: Only one click on tightening. People like to click it more than once. When this is done it applies more force than necessary. In other words it is now over tightened. This applies too much stress to the structure. Increases the possibility of failure. Don't do more than once.
ive had my ping g410 and my current g430 lst for awhile now. when tightening, ive never had it click like most experience. is there something im doing wrong when tightening it?
How stupid. Dah!! It’s a torque wrench that breaks / clicks at a certain value. It’s barely going to change anything (but a micro more at best.. the slower you’d repeat the better.. but 😰 GeeZus ..the fear 😧 LoL) but FEAR drives national elections so why should this be any different (?) BTW - constantly hitting huge 460cc drivers in the HEEL ..is way more dangerous than ClickClicks
thought you were going to us more then that short bit of info. whats the flat setting do? I knew what the other stuff does no help here. A waste of time.
PING ..must be THE all Champion of SHORT 🐥🐥🐥 Cuz’ the G.D. thing only goes FLATTER the more you go either direction out of neutral. - At least flipping a Taylormade 180* will help a little from slicing a ball. - So/But.. in my humble opinion, if you truly want a better adjustability.. here’s the deal. 4.) PING = Meh 🫤 3.) TaylorMade 🥉 2.) Callaway 🥈 1.) Titleist 🥇 🏆 🛎️ DingDingDing:)
PING ..must be THE all time Champion of SHORT 🐥people 🐥 Cuz’ the G.D. thing only goes FLATTER the more you go either direction out of neutral. - At least flipping a Taylormade 180* will help a little from slicing a ball. - So/But.. in my humble opinion, if you truly want a better adjustability.. here’s the deal. 4.) PING = Meh 🫤 3.) TaylorMade 🥉 2.) Callaway 🥈 1.) Titleist 🥇 🏆 🛎️ DingDingDing:)
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
A suggestion, if your driver head is stuck on shaft simple hold the club by the head at a 45* angle to the ground. Now simply tap the end of the shaft on the ground. This will free up the head and it can now easily be removed. You’re welcome. lol It really does work. DON’T try to force it.
Can't believe that works, nice one mate thank you
Worked beautifully. Thanks.
You’re very welcome, I’m glad I could help..
Your the mvp sir 👏 thanks
Pretty funny how easy it can be. You’re most welcome. 👍🏻
As a lefty I really appreciate you explaining the two different hosels , thank you.
Useful to show how to get club head off shaft. Ping heads often stick to shaft and is difficult to get off. After research and doing this myself I have found that after taking screw out you then knock head gently against shoe on foot while holding shaft. Do this a few times it will do it
We have noticed this is the case with a few of the heads / tips as well. Good thing to note for others
A suggestion, if your driver head is stuck on shaft simple hold the club by the head at a 45* angle to the ground. Now simply tap the end of the shaft on the ground. This will free up the head and it can now easily be removed. You’re welcome. lol It really does work. DON’T try to force it.
It's like your in my mind. Bought g430 driver yesterday and here you are today
😆
When I screwed off my drivers head, a red plastic ring poped out. Do you know what is that? And should I maintain it in there?
Same thing happened to me. Not sure where it popped off from as I was unscrewing. Help would be appreciated.
same, I'm looking for answers lol @@deuce9119
"THANK YOU" very much!!! Very helpful video!
Thanks for watching!
In STEP 3, is that click from the "PING Wrench" like a torque wrench of sorts, or from the screw in the head itself? I have a Ping G430 but they store just gave me a Cobra wrench which works but does not have feature like a torque wrench. I don't want to strip the screw. Thanks
I have the same problem
What does the flat setting mean?
PING ..must be THE all Champion of SHORT 🐥🐥🐥 Cuz’ the G.D. thing only goes FLATTER the more you go either direction out of neutral.
- At least flipping a Taylormade 180* will help a little from slicing a ball. - So/But.. in my humble opinion, if you truly want a better adjustability.. here’s the deal.
4.) PING = Meh 🫤
3.) TaylorMade 🥉
2.) Callaway 🥈
1.) Titleist 🥇
🏆 🛎️ DingDingDing:)
PS - unless you’re a hooker ..flat only loops ↗️ it right for righties.. and more left ..weak for lefties
What will the flat settings do for someone who fades and slices?
Answer … only make it worse. Ping (imho) are only for shorter humans who aim down the left side of fairways 🤷♂️
PING ..must be THE all Champion of SHORT 🐥🐥🐥 Cuz’ the G.D. thing only goes FLATTER the more you go either direction out of neutral.
- At least flipping a Taylormade 180* will help a little from slicing a ball. - So/But.. in my humble opinion, if you truly want a better adjustability.. here’s the deal.
4.) PING = Meh 🫤
3.) TaylorMade 🥉
2.) Callaway 🥈
1.) Titleist 🥇
🏆 🛎️ DingDingDing:)
This wax very helpful. I had adjusted my 10.5 degree G430 Max to 11.5 degrees but that didn’t work. Adjusting in to 9 degrees made a big difference
Hi, question…if I have a left handed hosel on my right handed club…where should the filled in circle be for the neutral setting? Thx!
Same.. Still centered 🚫 filled circle.
How does the wrong-handed loft sleeve work in relation to face angle? If I'm a righty, can I use a LH loft sleeve to increase loft and open the face at the same time?
I doubt it.. Cuz’ the neutral setting even in a LH tip.. still is the most upRite lie angle.
Just go w’ a Titleist SureFit chart (Google it:) And trade that Ping for any same or newer Titleist Driver. You’ll have every advantage and adjustment in the World:)
A rubber gromet came out og my 3 wood, somewhere, where does it go, and will the head stay tight without it in place?
One thing you didn't mention is how flat the club is in the flat settings. Correct me if I'm wrong but I believe the F as you have it labeled is 3 degrees flat and the other 2 settings of F- and F+ are 2 degrees flat.
All flat settings are 3*. + & - are just loft.
Can I put a g425 driver head onto my g425 3 wood shaft?
good idea, want to shorten the driver a bit too.
Won’t fit. I tried it.
I am a right hander and I hit a fade. I set my 9 degrees G430 to flat minus (for a lower trajectory since my previous driver was an 8.5 degree) and I am satisfied with the ball flight.
Love to hear it!!
@@2ndswingif he was a right handed that hits a fade wouldn’t setting the club to a flat minus cause even more of a fade or slice? That’s what I gathered from the video
Can you do a video on the Callaway adjustment sleeve?
Thanks!
Perfect 👍
What do the flat settings do?
The head does not come off the shaft...
Good way to lose the o-ring?
Mine doesn't click when I tighten it. I've tried it a dozen times now but no click!
@@tydecker694 Turns out I just wasn't turning it far enough. It clicks fine. Thanks for replying.
@@thegonz9 wow it certainly takes a lot of force before it clicks, I was really worried about damage or stripping the thread.
@richards5910 They're actual torque wrenches, and they click at a specific ft lb.
@@zellwoodskunkdo you know if a callaway wrench will work for my g430 or is it a different torque number and not compatible?
@87pittpens Yes, I actually use my old Taylormade M5 wrench, and it works fine.
Sooooo, what about flat?
I nowhere can found an explanation how to change the lie, but not the loft.
didnt say anything about what flat means?
Flat means increased ↗️ weak and RIGHT of a righty.
Do yourself a huge favor and look 👀 a SureFit chart (Google images) for a Titleist ❣️
PING ..must be THE all Champion of SHORT 🐥🐥🐥 Cuz’ the G.D. thing only goes FLATTER the more you go either direction out of neutral.
- At least flipping a Taylormade 180* will help a little from slicing a ball. - So/But.. in my humble opinion, if you truly want a better adjustability.. here’s the deal.
4.) PING = Meh 🫤
3.) TaylorMade 🥉
2.) Callaway 🥈
1.) Titleist 🥇
🏆 🛎️ DingDingDing:)
Note: Only one click on tightening.
People like to click it more than once. When this is done it applies more force than necessary. In other words it is now over tightened.
This applies too much stress to the structure. Increases the possibility of failure. Don't do more than once.
Good to note!
ive had my ping g410 and my current g430 lst for awhile now. when tightening, ive never had it click like most experience. is there something im doing wrong when tightening it?
It’s a torque wrench, you could click it thousands of times and it will get no tighter than the first, the torque setting is the torque setting.
How stupid. Dah!!
It’s a torque wrench that breaks / clicks at a certain value. It’s barely going to change anything (but a micro more at best.. the slower you’d repeat the better.. but 😰 GeeZus ..the fear 😧 LoL) but FEAR drives national elections so why should this be any different (?) BTW - constantly hitting huge 460cc drivers in the HEEL ..is way more dangerous than ClickClicks
thought you were going to us more then that short bit of info. whats the flat setting do? I knew what the other stuff does no help here. A waste of time.
You forgot to show the lie angle
When you leave an instructional video with more questions than when you started… it’s not a complete instructional video. Be better.
PING ..must be THE all Champion of SHORT 🐥🐥🐥 Cuz’ the G.D. thing only goes FLATTER the more you go either direction out of neutral.
- At least flipping a Taylormade 180* will help a little from slicing a ball. - So/But.. in my humble opinion, if you truly want a better adjustability.. here’s the deal.
4.) PING = Meh 🫤
3.) TaylorMade 🥉
2.) Callaway 🥈
1.) Titleist 🥇
🏆 🛎️ DingDingDing:)
Yeah, I want my $$ back😂
Just show us the adjustments already. Talk talk talk about nothing that helped.
Lol, thanks for watching!
Didn't help at all. Waste of time
PING ..must be THE all time Champion of SHORT 🐥people 🐥 Cuz’ the G.D. thing only goes FLATTER the more you go either direction out of neutral.
- At least flipping a Taylormade 180* will help a little from slicing a ball. - So/But.. in my humble opinion, if you truly want a better adjustability.. here’s the deal.
4.) PING = Meh 🫤
3.) TaylorMade 🥉
2.) Callaway 🥈
1.) Titleist 🥇
🏆 🛎️ DingDingDing:)
Thank you.