Holy Sh*t, diffas! This is one crazy machine. The RPM range impresses me. Does the engine easily take the 6,000 rpm? The sound is awesome - if you didnt know it, you would think its a 2.7 V6 or so ^^
It pulls harder the higher the rpm is. I think its the cams that i have. My old ecu starts cutting off fuel after 5500rpm so i'm changing gear (or at least trying) around 5500-5600.
As you can see it makes almost all the boost after spool up (right gauge) and my hp turbos are not boosting. Idea is to have lower boost on s362 and multiply it with the hp turbos.
@@bigdiffas that's interesting. my setup with 500nm don't work correctly on stock flywheel, it starts to vibrate strongly on 4,5,6 gears, in peak of torque. want to buy single mass flywheel from Valeo and adapt to the clutch kit from 3.0tdi audi. this clutch is pretty good for 600+nm
that sounds INCREDIBLE
Thanks. It is actually quite mellow noise since the exhaust goes thru two turbo stages.
3bar?! Man that’s crazy lol can’t wait to see it with more fuel 🤟
yeah 3.3bar max :P
13-14 afr for diesel its not leen its smokey
@@raimondasnezinau6510 yes but thats not in this case
thats a lot of turbo boost for a small diesel v6 with a stock ecu, really impressive 👍
Yeah max i have pushed is 4.5bar
Holy Sh*t, diffas! This is one crazy machine. The RPM range impresses me. Does the engine easily take the 6,000 rpm?
The sound is awesome - if you didnt know it, you would think its a 2.7 V6 or so ^^
It pulls harder the higher the rpm is. I think its the cams that i have. My old ecu starts cutting off fuel after 5500rpm so i'm changing gear (or at least trying) around 5500-5600.
@@bigdiffas damn.... 😳
Bien joué mec👍💪
Hey. Stock pump 106b works good as i can see😃👌 do you plan to use 106e instead?
Nope. Plan is to install my old pump once it is delivered to the pump shop for checking. So far they seem to work nicely
Hävyttömän komeeta!
Toivoa herättävä kyl. Tälleen ku tekijän ottaa huomioon 😂
Noilla lambda-arvoilla ei varmaan ihan mahdottomia savuja edes päästä👍 Eli ainakin ahtopuoli pukkaa sopivasti ilmaa.
Joo, no maksimisyöttö 5000rpm ja lambda 1.40. Periaattees aika hyvä :D Ku normaalisti ku viritetään niin 1.15-1.20
Hyvin rokkaa 💪, ja kohta vielä paremmin
Tekijän ku ottaa huomioon, niin yllättävänki hyvin :D
How much boost can hold a 2.5 tdi turbo stock because with 1.6 bar boost destroys my turbo
If the tune and the turbo are good. 1.8bar max for middle revs and 1.6 on max revs past 4000
@@bigdiffas thanks bro im going to install that turbo on my 1.9 pd just with 1.4 bar i think it is enough
@@riadxx3559 It is quite old tech turbo but its been used several 1.9tdi setups in past years so it will be fine. Its good for 200hp range
@@bigdiffas how much hp can i bring with this turbo without having any damage on engine or somethingels
@@riadxx3559 about engine i dont know how reliable it is, nornally 1.9 is strong and takes 200hp without any problem. 200hp is fine for turbo all day.
okay okay BUTTTT wath oil you jusd ??? 5W30 .... Many thnaks ...
I use regular diesel oil 5w40 that has vw ratings. Back then teboil diamond diesel but now moved to mobil delvac
Why the s362 should be too small? You ve 340hp and this turbo can give a lot of more ..
As you can see it makes almost all the boost after spool up (right gauge) and my hp turbos are not boosting. Idea is to have lower boost on s362 and multiply it with the hp turbos.
HI! which flywheel do you use? i think, standart 2 mass flywheel can't work with this torque😆
Stock flywheel like i used to have my old setup. Im planning to go solid one later
@@bigdiffas that's interesting. my setup with 500nm don't work correctly on stock flywheel, it starts to vibrate strongly on 4,5,6 gears, in peak of torque. want to buy single mass flywheel from Valeo and adapt to the clutch kit from 3.0tdi audi. this clutch is pretty good for 600+nm
@@marx921 well that depends on rpm you have the max torque. I have high reving engine so the peak torque comes pretty high rpm.
@@bigdiffas yes, looks like truth, i have gtb1756 turbo, and peak of torque is from 2000 to 3500 rpm. in this pretty low rews flywheel starts vibrate.
at 0:45 you almost turned your car into a train xD i think that wasnt good for the engine =D
there is just a jump on the road and the tires rub a bit
@@bigdiffasI thought it was power shifting
@@n52isfastforme Naah it normal shifting but happens to be small bump on the road so wheels did little rubbing noise
What is your maximum EGT before turbo?
egt probe wire took a hit and its not working currently. "should" be quite good temps since it is so lean
that small green screen is an egt sensor?
yes, but the wire is damaged so it reads whatever :D
What Is this ? 0:46
What do you mean? the rubbing sound? There is pump on the road so wheels rubs a bit
4 Turboloader?
Three
Hi, you have turbo gtb2260vzk on 2.5 tdi yes? Maybe you sell? XD
I have it on my b6 but it will stay on the car :) You can find lots of those on ebay
Да ну нах, так не бывает!
So-tdi fwd single is so much quicker
So how much ? 0-100? 1/4mile or 1/8mile?
😂😂😂