Nice job. To summarize : in oder to operate a hydrolic jack upside down, the only necessary trick is the small pipe going to the top (then after turning bottom) in order for the pump to access the oil reservoir ? Also do you really need the second hole to fill back the reservoir ? You could fill it through the original seal but standing and turn it over after the hole is closed again.
@@isaacnguyen6944 Yes, you only need the pipe going to the top to make it work upside down. On some hydraulic jacks that seal is not just a plug but a vent valve and must be above the oil level. Without venting too much vacuum can build up and the pump cannot draw in oil and if too much pressure builds up both the pump piston and the hydraulic cylinder piston will extend on their own instead of keep retracted.
Why don't you just connect and extent a hose from the filling in port to a small oil bucket [for oil return] above the jack and make sure that the oil jack container is filled with oil with the piston fully extended out inverted? I thought it would be much safer and easier?
من تلحم دائماً نظف خبث اللحيم بچاكوچ مدبب و فرچة سيم و لا تلحم فوگ الخبث او فضلات اللحيم. من تثقب الحديد دائماً خليله دهن حتى لا تتلف البرينة و لا يحمى الحديد هواي و يصير اسهل و اسرع بالثقب.
*Awesome… very beautiful 👌 thanks for sharing my friend 👍👍👍👍*
thank you sir i hope it's helpful for you
As usual, another great video! Keep up the good work!
thank you sir i hope it's helpful for you
ابهرتني فعلا معلم معلم معلم و متميز احسن من اي منتج جاهز
اشكرك اخى العزيز . انت المعلم و نتعلم منك
أحسنت أستاذي عمل روعه تصنيع جيد أحسنت العمل
اشكرك اخى العزيز
It is always a pleasure to see your work. Good work
thank you i hope it's helpful for you
nice video..so much knowledge and skills in it..tnx a lot ..
Thank you sir
Too complicated process, difficult for people like me but it's possible if anyone has ambitions. Marvellous & robust equipment.
thank you sir
Хорошая работа.
Спасибо, сэр
parabéns pelo projeto ...
Nice job. To summarize : in oder to operate a hydrolic jack upside down, the only necessary trick is the small pipe going to the top (then after turning bottom) in order for the pump to access the oil reservoir ? Also do you really need the second hole to fill back the reservoir ? You could fill it through the original seal but standing and turn it over after the hole is closed again.
thank you for your information
@@zana3587 It was not an information. It was a question to check if I have got it correctly. You are the tech guy, I am just a student.
@@isaacnguyen6944 Yes, you only need the pipe going to the top to make it work upside down.
On some hydraulic jacks that seal is not just a plug but a vent valve and must be above the oil level. Without venting too much vacuum can build up and the pump cannot draw in oil and if too much pressure builds up both the pump piston and the hydraulic cylinder piston will extend on their own instead of keep retracted.
Why don't you just connect and extent a hose from the filling in port to a small oil bucket [for oil return] above the jack and make sure that the oil jack container is filled with oil with the piston fully extended out inverted?
I thought it would be much safer and easier?
Wonderful video. is this your best yet? I think so. Proud to be your friend
thank you good man . are you good? your health good?
@@zana3587 yes doing fine now
دەسخۆش زانا، کارەکانت جوانن.
زور بةريزي
Great work my brother.
شكرا استاذ
شكرا شكرا يعطيك الصحة
👍👍👍👍👍👍
thank you sir
excelente
Wasta gyan nawakat bgora bo Dahen zana diy lawnya bashtr be u juantrsha tanha peshnyareka sarkawtu be ❤️
zor sopas bareze
دەست خۆش سەرکەوتووبیت
زور بەریزی
Best chanel
thank you sir
أستاذي عندي بطارية 20 فولت بارك سايد بلشحن عكست الاقطاب بلخطه فالآن بعد متشحن من اشحنها المصباح الأحمر والأخضر يشتغلن ويطفن شنو رأيك العطل شنو
اسف انا ضعيف جدا فى الالكترونيات
👍👍🤩
thank you sir
من تلحم دائماً نظف خبث اللحيم بچاكوچ مدبب و فرچة سيم و لا تلحم فوگ الخبث او فضلات اللحيم.
من تثقب الحديد دائماً خليله دهن حتى لا تتلف البرينة و لا يحمى الحديد هواي و يصير اسهل و اسرع بالثقب.
شكرا للمعلومات
دەست خۆش ئیشەکی چاک و پوخت ، کاک زانا ئاڕمێچەرەکم هەیە یەک لەفی سوتایە عیلاجی چییە کەس لەف ناکاتەوە لە هەولێرم
ئارمێچەری مشاری کارەبایە
بەرێزی . یەک هەیە لە هەولێر لای مەیدانی پایسکلان . تاکید نیمە لە شوێنەکەی . بە ناوی ابو زیاد سوریە
@@zana3587 دەست خۆش برام
و رابط الفيديو صار على الحالة في الواتس اب
اشكرك معلم
pesima herramienta , dile a los chinos q te diseñen......