What an amazing little freelance GWR locomotive. Your channel is simply great, very interesting and informative and well presented. Your attention to detail is just first class. I shall be looking at the little locomotive as it would make a great addition to my small locomotive fleet. Well done. 👍🚂
Dude that is very very nice to me I’ve seen a lot of GWR tank engines and to me it looks like they take different parts from different engines and put them on the new ones
Very professional. Am I the only one to get European vibes from that low smokebox handrail? Looks almost like a mix between a small prairie and one of the classic märklin locos.
I have to say it your 0-4-0 95XX and your mini prairie loco body shells are amazing I love to purchase your loco shells when I receive my new jobs pay pack
Just received this loco body the quality is fabulous gonna paint primer then looking forward to gwr colours and running on my poor excuse of a layout I hope you do more and wish you all best for future
That is an excellent result and looks great on the layout. The little extra details such as coal , end number plates does make the difference, All the best for 2022 ........................Cheers Kev
Hi Neal! Amazing work! I was wondering, where did you get the model for the 0-4-0 chassis itself? I'm also trying to design my own locos and I'm having a hard time finding a good 3D model of the chassis! Thank you!
Thank you Eric! I started out self taught about 16 years ago and then changed my job where I have to use it each day. There are many routes in with some nice entry level softwares. It’s a case of starting with a box or any shape and add or subtract what you need. And be very patient 😊 Merry Christmas to you and your family
Great useful video. Can I ask how you managed to place the loco crew inside the loco as I always struggle putting them into the loco cab on tank engines?
This is very very good . I've looked on line..the 0-4-0 Hornby chassis appears out of stock every where I've looked...Or do you know where I could purchase one .
@@muddymarvellous there are various places but eBay you will need to be very selective to find a chassis don’t pay more than 25 for a second hand one and 35 for a new one. But that’s really top money. I’ve picked some up for 15 over time so be careful
@@OONeal ok thank you.. I'll look at eBay..thank you....looking forward to you expanding and producing models perhaps in 009 and advising on conversion to DCC .I'm a newbie but have read hours and hours of material..I would love a 009 and 00 railway on the same board ..00 shunting and 009 circular.."small space" in spare bedroom..it's been some 50 years since my brother and I had a railway..! I've already done a table top railway for grand children . I've some lovely detailed 00 models that I've salvaged bits and bobs from kits over 50 years ago .using my own kit building techniques.. Unfortunately my way takes months to build houses etc..but they look nice..I use plaster for rendering makes kits look very solid .and old . cottages have individual card pieces for tiling .some 300 tiles on a roof..takes for ever..good job I'm short sighted ! Merry Christmas 🎄 James
@@OONeal appears the only way of obtaining an 0-4-0 chassis new is to purchase a Santa Christmas train set from Amazon for £54. Do you think the running gear/chassis is an 0-4-0 ..? So many stock outs out of stock New everywhere..
Thank you, The chassis I used the Hornby 0-4-0 chassis which I reverse engineered. After drawing it up on CAD I could then start working on the body model.
hey tris! i love how you always produce these lovely 3D printed bodies to fit to other engines chassis’! would be cool if you could do a video on how to paint your own models, would be helpful for me, and most certainly others! hope ya had a good Christmas! -taylor
Hi Jeff, Its still avalible on the website, I have included the link below. I'm glad you like the look of it. www.oonealdesigns.com/product-page/12xx-gwr-3d-printed-body-for-hornby-0-4-0-chassis
think there's a prob with web site im unable to veiw any of your products except signal box, when clicking on quick veiw its taking me back to top of page, stay safe and a happy new year
Hello Trev, If you click on this link you should be fine. www.oonealdesigns.com/shop I hope that helps please let me know if it doesnt. Take care and have a great new year!
Would u be open to painting a 37 for me and doing some costume work 3d print work as I whant to have a new 37 done in the 37 304 livery that uts currently in ?
![FNAF vs TF2 - Episode 2 [SFM]](http://i.ytimg.com/vi/z5b3V2-VLb0/mqdefault.jpg)
Rc car modeller as well with the robin hood raceway mug there. Excellent end product its amazing what 3d printers and their designers are acheiving.
Indeed I am. I found Model Railways a nice escape when the cars get too much.
Just ordered a body can't wait
Thats great I have posted it today for you! Enjoy 😁
It’s amazing how much detail you got into a single print, if I wasn’t sold on getting a resin printer before I’m definitely getting one now!
Thanks, Well I am glad you have had your mind sold on the idea of it now. Take care!
Great video Tris and a really good idea :) when i get a layout sorted 👍🏼👍🏼
Thank you Leo, enjoy getting the layout sorted 😊 Merry Christmas
What an amazing little freelance GWR locomotive. Your channel is simply great, very interesting and informative and well presented. Your attention to detail is just first class. I shall be looking at the little locomotive as it would make a great addition to my small locomotive fleet. Well done. 👍🚂
Fantastic job. Looks very professional.
Thank you John!
that is really good, great work Tris
Thank you Paul! Thats much appreciated!
That's wonderful you're selling your designs! 🤗🤗🤗
Thank you, I have some very supportive people in my life encouraging me to do these things ❤️😘
@@OONeal ❤
Looks great and good workmanship....let's see more, have a great Xmas & New Year..
Thank you David, I appreciate that it has taken some time to get to this stage 😊 take care and have a great New year!
Dude that is very very nice to me I’ve seen a lot of GWR tank engines and to me it looks like they take different parts from different engines and put them on the new ones
Very professional. Am I the only one to get European vibes from that low smokebox handrail? Looks almost like a mix between a small prairie and one of the classic märklin locos.
I have to say it your 0-4-0 95XX and your mini prairie loco body shells are amazing I love to purchase your loco shells when I receive my new jobs pay pack
Mine looks great thanks gonna number 1201 waiting on plates to come thanks Fab loco hope you do some more bodies for these wonderful chassis
Thats Excellent Jackie! I would like to do some more bodies as its alot of fun making them for the layout.
Just received this loco body the quality is fabulous gonna paint primer then looking forward to gwr colours and running on my poor excuse of a layout I hope you do more and wish you all best for future
Tris, that is a brilliant job, congratulations Cheers and Merry Christmas Greg
Thank you Gregory! Merry Christmas to you too! Take care
Incredible painting!
Thank you Carl! Merry Christmas!
Hi Tris nice looking loco (body), look out Hornby !! (lol). A merry Christmas and best wishes for 2022..
Thank you Barry! Hopefully they like it 😁 merry Christmas to you too and I hope 22 is good for you too 😊
Fantastic Tris! Merry Christmas and Happy New Year!
Thank you Jade, and thank you for your support 😊 merry christmas to you too and I hope 2022 is a great year for you 😊
Really good paint job . Merry Christmas Tris and to your family .
Thank you Phil! Merry Christmas to you too 😊
A 15 out of 10!! I look forward to ordering one!!
Great I am glad you like it!
I’ve made 3 variants of the Tattoo class for wooden railway chassis’ on tinkercad
Great looking loco. Very interesting how you did it all.
Thank you Duncan! It was a bit of a journey start to finish as I didn’t talk about reverse engineering the chassis 😊 Merry Christmas!
@@OONeal Merry Christmas to you too.
That is an excellent result and looks great on the layout. The little extra details such as coal , end number plates does make the difference,
All the best for 2022 ........................Cheers Kev
Thank you Kev, the same goes to you too. Thank you for the kind comments over the year!
Really nice job! 👏👏
Thank you Alex!
Fantastic looks very great western 😁😁😁😁
Thank you Dan! I was pleased to get it this way. Merry Christmas 😊
Great work Tris. Nice to see you putting them up for sale.
Thank you Rob, I had quite a lot of contact from people about getting one from me I felt I should do. Thank you for the support and Merry Christmas! 😊
It's like Sams Trains - but extremely competent.
Vary Cool. Merry Christmas 🎄
Thank you John! Merry Christmas to you too 😊
Well done, Tris! Very impressive results, indeed. 👍
Thank you Andrew 😊 Merry Christmas!
Brilliant video Tris. The paint finish turned out really good. I will have a look at your website. Merry Christmas to you and your family. - Nicholas.
Thank you Nicholas! I was really pleased with how it looked in the end. Merry Christmas to you too! 😊
Very nice. Merry Christmas.
Thank you! have a great new year!
Hi Neal! Amazing work! I was wondering, where did you get the model for the 0-4-0 chassis itself? I'm also trying to design my own locos and I'm having a hard time finding a good 3D model of the chassis! Thank you!
It looks great! Welcome to the 3D printed sales club! lol
Thank you for the welcome. I felt it was time 😊
Another great feat of engineering Tris. You make it look so easy and the finish you achieve is top class.. Merry Christmas….regards, Chris
Thank you Chris! That means a lot 😊 Merry Christmas to you too 😊
@@OONeal How much is it
Looks really good Tris. If I had a model railway I would definitely buy one from you!
Thank you Kevin! Maybe one day you will get one. Merry Christmas!
Nice job
Thank you Colin
What a cute lil guy
Thank you and Merry Christmas
Have a great Christmas neal!
I really like that 😂 proper cute haha! How did you learn the cad side? Any tips?
Thank you Eric! I started out self taught about 16 years ago and then changed my job where I have to use it each day. There are many routes in with some nice entry level softwares. It’s a case of starting with a box or any shape and add or subtract what you need. And be very patient 😊 Merry Christmas to you and your family
Hi Tris. Love the loco body. The footplate figures always look fantastic! Have a great Xmas and all best wishes for the New Year.
Thank you Paul, Take care and have a fantastic new year!
Brilliant!
Thank you Barry!
I do like it for I think I might try to make one for myself out of Lego
Looking forward to it
I hope you enjoyed it Jackie
Great useful video. Can I ask how you managed to place the loco crew inside the loco as I always struggle putting them into the loco cab on tank engines?
Please make some of those old prototypes absorbed into the GWR!
Great video merry christmas to you Tris
This is very very good . I've looked on line..the 0-4-0 Hornby chassis appears out of stock every where I've looked...Or do you know where I could purchase one .
Thank you 😊 Merry Christmas to you too 😊
@@muddymarvellous there are various places but eBay you will need to be very selective to find a chassis don’t pay more than 25 for a second hand one and 35 for a new one. But that’s really top money. I’ve picked some up for 15 over time so be careful
@@OONeal ok thank you.. I'll look at eBay..thank you....looking forward to you expanding and producing models perhaps in 009 and advising on conversion to DCC .I'm a newbie but have read hours and hours of material..I would love a 009 and 00 railway on the same board ..00 shunting and 009 circular.."small space" in spare bedroom..it's been some 50 years since my brother and I had a railway..! I've already done a table top railway for grand children . I've some lovely detailed 00 models that I've salvaged bits and bobs from kits over 50 years ago .using my own kit building techniques.. Unfortunately my way takes months to build houses etc..but they look nice..I use plaster for rendering makes kits look very solid .and old . cottages have individual card pieces for tiling .some 300 tiles on a roof..takes for ever..good job I'm short sighted !
Merry Christmas 🎄
James
@@OONeal appears the only way of obtaining an 0-4-0 chassis new is to purchase a Santa Christmas train set from Amazon for £54. Do you think the running gear/chassis is an 0-4-0 ..? So many stock outs out of stock New everywhere..
What 3D printer do you use? Thinking of buying myself one in the post-Christmas sales and was wondering which one you used to make this.
I use an Anycubic Mono X which is a 4K large bed printer. It works well but I do not know how the other printers fair.
Lovely model, the chassis model did you make your self or did you download it for reference to build shell around it?
Thank you, The chassis I used the Hornby 0-4-0 chassis which I reverse engineered. After drawing it up on CAD I could then start working on the body model.
@@OONeal ah make sense, I'm planning to make a Single Fairlie from the bachman Double Fairlie
hey tris! i love how you always produce these lovely 3D printed bodies to fit to other engines chassis’! would be cool if you could do a video on how to paint your own models, would be helpful for me, and most certainly others!
hope ya had a good Christmas!
-taylor
Hornby should employ you
Amazingly well detailed loco. Great design! Can we still purchase some of these? I sent an email as well. Thanks
Hi Jeff, Its still avalible on the website, I have included the link below. I'm glad you like the look of it.
www.oonealdesigns.com/product-page/12xx-gwr-3d-printed-body-for-hornby-0-4-0-chassis
Will we get a re run of these? I missed out on the first lot 😅
I like the idea for a small Prairie engine i offense the 2-6-2 look a bit too long not horrible but you know what I mean
think there's a prob with web site im unable to veiw any of your products except signal box, when clicking on quick veiw its taking me back to top of page, stay safe and a happy new year
Hello Trev, If you click on this link you should be fine. www.oonealdesigns.com/shop
I hope that helps please let me know if it doesnt.
Take care and have a great new year!
You can get a hornby replacement chassis from branchlines
Do you still have these? I'd really love two bodies because I'd like to get back in the hobby.
Could you send me a link to where you get your transfers?
hey oo neal can you upgrade the valve gear os 4-0-4
I have seen some people do it but I havnt tried, it will be something I need to learn about really.
Would u be open to painting a 37 for me and doing some costume work 3d print work as I whant to have a new 37 done in the 37 304 livery that uts currently in ?
Hello Bradley, Its not something I would be confident doing im afraid. I hope you can find someone who can help you with this. Take care
I would like one
Great!
GWR 1366 ??
I’ve got one of them at home but this looks quite different
amazing how you can build this and charge a decent price yet hornby would charge 200 pounds for such a model
Thank you Jake, Its just the body though for this not the whole thing. I appreciate your words though