I’ve watched so many of your videos, I just realized during this one why you bend your measuring tape. Genius, I always struggle with it moving. It doesn’t move if you bend it. 👊🏻
Quality tools, quality work. I am also a carpenter, I use Festool tools, for us this is the "Porsche" category. It takes fanaticism to buy them. They are amazed at most jobs because they have never seen anything like this before. There were times when I jokingly said that this is the new Tesco brand. Your works is demanding and can be based on extensive professional experience. I wish you more success.
What is the name of the accessories you use to adjust the fillers? What do you use to do the pencil layout? By the way, I love the detailed and orderly form of your work. I hope one day to work like you.
Margin is called see in video description THANKS for watching my video believe me you will be if yuou are willing to sacrifice your free time and do more work as well invest in yourself in fact you can be better as i am not an ambitious man
Tu trabajo es sublime, un maestro. Me dedico a lo mismo y se lo que debe ser descargar ese arsenal de maquinaria para un montaje. Valen mucho mas tus maquinas que la cocina… Las instalaciones de fontaneria y electricidad dan un poco de miedo, eso si. Yo también hacia agujeritos para la fontaneria hasta que hay un problema y tienes que hacer registro grande… De hecho, las Bulthaup no llevan trasera en el modulo fregadero por eso. Enhorabuena por tu trabajo.
Very nice work Please what brand are the Gola profiles and the runners. I am from Ghana and am building kitchens. I find your videos so very informative and useful
@@CAVjoinery Amazing. Only 4 years to get to the point, where you have the most advanced tools and this level of sophistication. Gives me hope. Can I ask you a few more questions? I have a lot I could learn form you.
Привет! Посмотрел много твоих видео. Где ты все делаешь идеально,а у тебя бывают ошибки? Например ошибки в расчетах. Или неправильно отпилил или просверлил. Я тоже давно занимаюсь изготовлением и установкой мебели и постоянно совершаю ошибки. И после твоих видео мне кажется у меня кривые руки..😊
I do make mistakes i am as well human like you but i am lucky mine are repairable actually last big mistake i have done was last year i have cut a worktop too short it cost me £ 400 😅 thanks for watching
@@CAVjoinery Спасибо тебе за ответ. Я тоже сейчас устнавливаю кухню и тоже не правильно отпилил столешницу. Но думаю не придется покупать новую. Попробую выкрутиться так. Удачи тебе в работе!🤝
I’ve watched so many of your videos, I just realized during this one why you bend your measuring tape. Genius, I always struggle with it moving. It doesn’t move if you bend it. 👊🏻
Glad to help! Thanks for watching !
❤❤ Best
The tools and workmanship is good but the cabinets are chipboard and are overly complicated!?!
Quality tools, quality work. I am also a carpenter, I use Festool tools, for us this is the "Porsche" category. It takes fanaticism to buy them. They are amazed at most jobs because they have never seen anything like this before. There were times when I jokingly said that this is the new Tesco brand. Your works is demanding and can be based on extensive professional experience. I wish you more success.
Thanks a lot i see well i like to stuck with one type of equipment so i can understand their function and accessories etc
A pleasure to watch as always. Picking up my first festool tools today, so excited. ❤
Wonderful! I see me back in days taking my first drill in spreading cost over 6 months straight away i love it
What is the name of the accessories you use to adjust the fillers? What do you use to do the pencil layout?
By the way, I love the detailed and orderly form of your work. I hope one day to work like you.
Margin is called see in video description THANKS for watching my video believe me you will be if yuou are willing to sacrifice your free time and do more work as well invest in yourself in fact you can be better as i am not an ambitious man
Tu trabajo es sublime, un maestro. Me dedico a lo mismo y se lo que debe ser descargar ese arsenal de maquinaria para un montaje. Valen mucho mas tus maquinas que la cocina… Las instalaciones de fontaneria y electricidad dan un poco de miedo, eso si. Yo también hacia agujeritos para la fontaneria hasta que hay un problema y tienes que hacer registro grande… De hecho, las Bulthaup no llevan trasera en el modulo fregadero por eso. Enhorabuena por tu trabajo.
Thanks appreciate it! Keep up with your work
What brand of kitchen is this? It looks a difficult one to install.
It was home design
Did the customer choose particle board to save $?
Yes it is common material in EUROPE is more about environment as this material are recycle ♻️
You do amazing work. Wish you were local, I hire you in an instant.
Wow, thank you! For watching and for the compliment !!
Very nice work Please what brand are the Gola profiles and the runners. I am from Ghana and am building kitchens. I find your videos so very informative and useful
Well you have to search the supplier from your location mine is home design in the uk
Ficou muito bom. Como comprar maquinas e ferramentas Festool? 🇧🇷
Thanks i do not think they are available in your country search for festool
Great work, how long did this install take you ?
The kitchen takes me 4 days i have last part to post it next day
Everything is festool. Nice job .
Thanks
I love your all machine. To make a cabinet...I like❤️
Thanks so much!
Another fantastic video 👏what make of kitchen do you fit ?
Thanks for the support home design hq
What kind of bracket are you using to hang the upper cabinets?
Hey here is amazon link for them amzn.to/3PEgL2K
@@CAVjoinery what about the bracket on the cabinet itself
You are amazing. Where did you learn these things?
I have joined a fitter 4 years ago then i started on my own watching a lot of videos on youtube
@@CAVjoinery Amazing. Only 4 years to get to the point, where you have the most advanced tools and this level of sophistication. Gives me hope. Can I ask you a few more questions? I have a lot I could learn form you.
What's a jointing machine and biscuits do you use?
Is called lamello zeta thansk
Привет! Посмотрел много твоих видео. Где ты все делаешь идеально,а у тебя бывают ошибки? Например ошибки в расчетах. Или неправильно отпилил или просверлил. Я тоже давно занимаюсь изготовлением и установкой мебели и постоянно совершаю ошибки. И после твоих видео мне кажется у меня кривые руки..😊
I do make mistakes i am as well human like you but i am lucky mine are repairable actually last big mistake i have done was last year i have cut a worktop too short it cost me £ 400 😅 thanks for watching
@@CAVjoineryen France on dit mesurer 10 fois couper une fois 😂😂😂😂 bon travail en tout cas 👍🏼
@@CAVjoinery Спасибо тебе за ответ. Я тоже сейчас устнавливаю кухню и тоже не правильно отпилил столешницу. Но думаю не придется покупать новую. Попробую выкрутиться так. Удачи тебе в работе!🤝
@@JayJay-jk2kl У нас в России говорят-"7 раз отмерь-один раз отреж.."😊
Но когда спешишь всегда сделаешь что нибудь не так..🙂
Главное чтобы заказчик не увидел твоих ошибок, если не заметил значит всё делаешь правильно, следовательно руки не кривые а обычные. Желаю успехов
Salut , ca întotdeauna , calitativ și rapid . Probabil ești cel mai echipat meșter ce se ocupă cu mobila .
Multumesc foarte mult ! Ma bucur ca ti.a placut
where do u buy the wood boards from?
Home desing
do u have a link@@CAVjoinery
Hola me gustaría aprender a fabricar los gabinetes y alacenas tendrás algún curso para aprender
No i do not but i will do in the future thx
Можете подсказать что за шаблон зеленый , как называется кто производитель
Margin marker
What is the name of the saw you are using?
They are all festool.
they are expensive bro...
Festool cts 55 k
With such tools, you can build a shuttle 😁👍🏻
Cool idea! :))) nice complimet
🇧🇷 Valeu professor. Abraços.
No worries!thanks
Hey Antonio, how do we contact you to see if we can work together on our project?
I onli do work in Sheffield is so you can right me here facebook.com/CAVjo1nery
Думаю это реклама оборудований, а что он мастер хороший нет сомнений
No is not but please tag me in their page so they can sponsor me thansk
❤❤❤
Thx
Что за фурнитура при соединении???
Lamello p14 clamex
Felicitar esti foarte bun
Multumesc foarte mult pt vizionare !
💥👌👍😎
Thx
You don't need a colleague to learn from you❤
I already have someone thanks
I assume this is Beeck kitchen Halifax oak design
Home design hq
Good
Thanks
جميل جدا
Thanks 🙏
If only you can just post the videos of yourself preparing the your cutting list 😭 please
Oh sorry i do not design this
The units are chipboard not oak
I never said they were oak that is a finish name called halifax oak
Не круто. А чего торцовка то не аккумуляторная ? ))))
What trimmer are you referring at ?
The units are chipboard
Yes they are !
Установка фасада на ПММ по шаблону- отсутсвие опыта. Инструмент хороший, артист посредственный.
That is fine i will learn even from you if you share your work thanks
Best of the best
Much appreciated
That looks nice.
I made nice workbench for woodworking, all proces how I made that is on my chanel.
I have seen it is not finished yet
Fix gola???
Yes