To watch a tradesman at work is an absolute dream. Your attention to detail is incredible and as many comments have stated, you’re cleanliness is amazing, and this video sells you so well. I know you get what you pay for, I would have no issue in paying for work to this standard. There is a piece at 7:10 to see you and your machinery at work just blew me away. Thank you for sharing your trade & skill in fitting this kitchen.
I was a kitchen fitter for nearly 40 years at home and abroad. I liked to work clean too, a great system and skill to go with it. Respect to you. Cheers. No festool in my day though. 😂
Jesus is the only way to healing, restoration and salvation to all souls. Please turn to him and he will change your life, depression into delight, soul heading from hell to heaven all because of what he did on the cross “Whoever calls upon the name of the Lord shall be saved” Romans 10:13
Fantastic ,Im doing one myself as a handyman and I could have used your video and tips within . Mine is almost finished now ,but cheers for all the tips .
Отличная работа,впрочем как и всегда! Смотрю за Вашей работой и улыбаюсь)))),,сейчас я у этого парня украду две,три идею и применю их в своей рабочей практике,,....Удачи Вам и побольше секретов которые стали не только вашими но и нашими))))
@@Vov166Это утрировано,сам мебельщик....поэтому каждый из нас или одобряет работу оппонента или же просто молчит! В практике у парня есть приемы и методы которые отличаются от нашей......это на мой взгляд....а в остальном дело каждого!
Nice job, ! Instead of hitting the metal thingy on the plastic one when preparing the domino connector. You can 1st pu the metal and then the plastic retainer. Or is it a reason you are doing this like it
Excellent workmanship, neat work, very skilled professional installation - well done - I’m curious why did you use 2 x dominoes as spacers with the worktop jig pins? Do you ever use the domino worktop jointing method also on the plinth joining?
Please, please, please can you make a video on how to make your caliper tool, it looks awesom and very custom made, especially the T at the top. I can't even find a caliper ruler with a T on the endI want to buy one! You should sell merchandise, I for one would buy! Keep up the awesome videos!!!
Festool’s marketing/sponsorship budget must be astronomical, watched 3 different videos in the last few days and they’re all absolutely dripping in festool equipment/tshirts 😂
Beautiful install, but with all those fancy tools you had to build a jig for the handles... question, I know those are ikea cabinets but what are the metal pcs inside the top corners of the cabinets. Again great work!
Thanks i have use one handle jig before and i did not like it i messed up si in orther to get my braind work i always do jigs it helps me understand the principle hope it make sense thanks
@@CAVjoinery absolutely...the metal pcs. Inside cabinets, they're the hangers and adjustable to accommodate any fluctuations in the wall? Again keep up the good work!
Important que tu saches que tu bosses vraiment très très bien. Tu devrais demander une augmentation 😊. On ne peut que te faire confiance quand tu poses une cuisine. Ça fait vraiment plaisir de te voir travailler. 👌
What are you marking on the wall at the very beginning of the video? Is it the plinth height, then the unit height? You make two separate marks, then draw one long line.
I started by finding the highest point of the floor and from there i can mark my 150mm plinth 720mm base cabinet 40mm worktop 52 -55mm space then 720mm wall units then dropped down 60mm for hanging wall brackets
nice work, but is it a demo one? I mean wtf with the floors?? looks like a barn. usually ppl do furniture installation on normal and finished floors...
Installing a kitchen on a finished floor is a common mistake as the ground moves, having cabinets installed on top of your floor tiles is counterintuitive.
@@CAVjoinery7 hours 😮 💪💪💪 the guy we have on the firm takes all week to do a kitchen! no where near as good a job or a kitchen that big. He doesn’t even join the worktops just uses those bars and has me helping lift the worktops and cabinets 😂 you must make some serious coin! Respect to you sir!!
A shame the masons mitre ended up right next to the sink cut out but obviously a kitchen design fault not yours. Can i ask what kind of fixings you used for the wall cabinets? I tend to cut out the plasterboard and nog out the wall if theres nothing behind it.
@@CAVjoinery Получается, вы крепите кухню на гипсокартон. Я не решаюсь крепить только к гипсокартону. Я делаю крепления чередованием - один в стену, другой в гипсокартон.
Great workmanship, i almost got a hard on. What a shame the kitchen was done before the floor though. I suppose they will lay a new one on top of that one. Because of the height difference there wont be a clearance anymore for the panel by the floor, you wont be able to open it then.
Tenho uma loja de móveis planejados e nossa maior dificuldade é ter mão de obra especializada, ferramentas e ferragens. Parabéns pelo excelente trabalho.
Las buenas maquinas también necesitan unas buenas manos que las manejen, el orden y la limpieza son esencial para un buen trabajo, lo que no entiendo de este montaje es como se puede montar una cocina sin estar el suelo puesto
Sometimes we are dealing with this situation where floor is floating so it needs to be separate from the fixed or heavy stuff like kitchens doors walls etc
Le-am vopsit crezand ca astfel lumea o sa inceteze sa ma spuna ca fac reclama la scule dupa cum poate ai observat am deslipit si etichetele cu numele producatorului
Thank you it’s ok I used a special drill bit that prevents from tearing out and on this type of material is unlikely to tear out more than screws head can cover 🙏
To watch a tradesman at work is an absolute dream. Your attention to detail is incredible and as many comments have stated, you’re cleanliness is amazing, and this video sells you so well. I know you get what you pay for, I would have no issue in paying for work to this standard.
There is a piece at 7:10 to see you and your machinery at work just blew me away.
Thank you for sharing your trade & skill in fitting this kitchen.
Thanks 👍 thank you so much for your nice comment i use a domino as a packer so my joints are a bit tight looking
We need more trades like you mate, time, skill and attention to detail are seriously lacking these days.
Love the vids 👍
Much appreciated ,thanks 🙏🙏
I was a kitchen fitter for nearly 40 years at home and abroad. I liked to work clean too, a great system and skill to go with it. Respect to you. Cheers. No festool in my day though. 😂
Thanks a lot for sharing it mean a lot to nice wards comimng from a professional thank a lot
😅 to@@CAVjoinery
Hi
please can you advise do i tile my kitchen floor and walls before the kitchen goes in or after its fitted
Worktop cut in 1 go with the router..??
This is excellent! So much detail!! great camera angles!!!
This family should be thankful they got you to do this!
Thank you so much! For watching this is actually renting property 🙏🙏
I would love to have do my kitchen.
Jesus is the only way to healing, restoration and salvation to all souls. Please turn to him and he will change your life, depression into delight, soul heading from hell to heaven all because of what he did on the cross
“Whoever calls upon the name of the Lord shall be saved” Romans 10:13
Always a pleasure to watch you using all the different tools to fit all the cabinets,all so easy for you.very skillfull.
Thanks so much for your thoughts 🙏
Why did you put the domino's behind the work top jig pins?
I just came across ur videos the workmanship is really impressive! Love ur work and how clean ur work is plus the recording is simply awesome
Fantastic ,Im doing one myself as a handyman and I could have used your video and tips within . Mine is almost finished now ,but cheers for all the tips .
My goodness, so easy just to watch you doing these kitchen cabinets but then I look my own kitchen hmmm 🧐 🤔😅 thank you Mr. C A V joinery 🙏❤️
You are so welcome! Glad i can help
Прекрасная профессиональная работа. Много нужных идей взяла для себя.
Thanks,glad to hear that i can help 👌
And I thought I was Well organised!
Loving the use off the festool trolly! Think I may have to get me one now 👍🏼
Thanks they work great for me , thanks again for watching
Отличная работа,впрочем как и всегда! Смотрю за Вашей работой и улыбаюсь)))),,сейчас я у этого парня украду две,три идею и применю их в своей рабочей практике,,....Удачи Вам и побольше секретов которые стали не только вашими но и нашими))))
Thanks so much for watching and sharing your thoughts on this matter,really appreciate your comment on my work 🙏🙏
И что же вы нашли секретного? Поделитесь пожалуйста
@@Vov166Это утрировано,сам мебельщик....поэтому каждый из нас или одобряет работу оппонента или же просто молчит! В практике у парня есть приемы и методы которые отличаются от нашей......это на мой взгляд....а в остальном дело каждого!
@@ALFOED я работаю точно так только разница в том что я ничего на месте не режу и не подгоняю все детали заранее нарезаны
Great video, I learned a lot of tricks. But I have to ask will the floor be laid and cut around the kitchen?
Yes it will or can be removed end pannels as it is a floating floor
Loved watching az usual poetry in motion the music topped it off loved the jointing instead of dog bones really neat well done ❤
Glad you enjoyed it and thank you so much for watching this
Thank you for taking the time to post, love watching your skillful work
My pleasure! Appreciate your comment👍
Excellente technique pour les poignées 👍
Cheers
So is it better to install cabinets first before finishing floor?
When the floor will be a floating one yes
what is the grey glue you use, is it an epoxy ?? / silicone
It is adhesive sealant
I love your work! Some people say hang wall cupboards first some say floor units first. I see you do the floor units first, any reason why? Any tips?
Well it depends i like to put the units first as would be bumping head against the wall units some time
Nice job, ! Instead of hitting the metal thingy on the plastic one when preparing the domino connector. You can 1st pu the metal and then the plastic retainer. Or is it a reason you are doing this like it
No it is not it can be doner either way thanks
Excellent workmanship, neat work, very skilled professional installation - well done - I’m curious why did you use 2 x dominoes as spacers with the worktop jig pins? Do you ever use the domino worktop jointing method also on the plinth joining?
Nop on chipboard , maybe on MDF as they never worked properly because is not hardwood
He used the domino’s as spacers to make the mitre shallower than normal
Please, please, please can you make a video on how to make your caliper tool, it looks awesom and very custom made, especially the T at the top. I can't even find a caliper ruler with a T on the endI want to buy one! You should sell merchandise, I for one would buy! Keep up the awesome videos!!!
Thanks for the idea! I will try hopefully soon
Festool’s marketing/sponsorship budget must be astronomical, watched 3 different videos in the last few days and they’re all absolutely dripping in festool equipment/tshirts 😂
What do you mean ?
That is because festool works. I have the exact same equip and for sure I am not sposored :)
Peace
Nice work and digestible at the same time
That you love your work continue and work hard
Peace Rachid Amsterdam Netherlands Morocco,🇲🇦🇲🇦🇲🇦
Thank you sir same to everyone 😊👍
This is why I have subscribed for the excellent workmanship
Great like always!
What height do your base and wall units be at?
Thx around 500 520 mm
Top - Great work. But why you didnt do the wall and the floor first?
I had tyo be done as there was a schedule time
Beautiful install, but with all those fancy tools you had to build a jig for the handles... question, I know those are ikea cabinets but what are the metal pcs inside the top corners of the cabinets. Again great work!
Thanks i have use one handle jig before and i did not like it i messed up si in orther to get my braind work i always do jigs it helps me understand the principle hope it make sense thanks
@@CAVjoinery absolutely...the metal pcs. Inside cabinets, they're the hangers and adjustable to accommodate any fluctuations in the wall? Again keep up the good work!
Great work ,who supplies your kitchens???
Home design
Thx
What type of construction adhesive do you use for gluing the two particle board countertops together?
I used egger sealant adhesive
I didn’t see what you did with the cut edge of the wrap around gable, did you put edge tape or coloured filler on them.
I have used edge band and after i have put metal end cap because is rental property
Great job pal👌…. But got to ask what plum wedged the sink into the corner when clearly abit more thought & it could have gone under the window🤔
Good question! If you look there inside that unit is all electrical wire so control power is there
I agree, that would drive me mad
Great job, what kind of wall fixings did you use?
I used m5 here is my amazon link amzn.to/45ibovPand the setting tool for them amzn.to/3ZIQ4yj
Curious how you fasten the bottom of the upper cabinets to the wall? It looks like you just hang them on those cleat hooks and that’s it?
Yes and not to say that the spals back will help as well at the bottom
How long did it take you to get the work done?
One day
Bonjour A Vous Merci A Vous Pour Votre Magnifique Videos 📽️ Magnifique Travail Nikel Bravo 👏👏🙌💪
☺️☺️☺️thank you for supporting my channel by commenting and watching the videos 🙏🙏🙏
@@CAVjoinery Merci beaucoup 🤲🤲
Do you screw the overhead cupboards to studs or just those anchors?
Some of them have hit the stud so i used screw on that matter but majority were just on cavity wall
Great install ❤ have never seen that domino worktop joiner setup before looks like it works well. 👊👊
Thanks I only use it on this kind of fixings as they are not pulling strongly tightly joint because the chipboard
Very nice. Can you share the brand and model of the “Rivet” tool that you used to add the hangers for the upper cabinets?
I made it my self from a old calipper
It’s a HOLLOW WALL ANCHOR & SETTING TOOL.
Fastool made in Germany
Excellent craftsmanship sir!
Thanks for watching
Amazing. Where do you purchase your hardware accessories from?
Frm home design
@@CAVjoinery Thank you. I don't know of Home Design in the USA, but I will check.
Good job. Where’s that kitchen from?
Thanks for watching 🙏 home design
Brilliant job my friend!
Thanks so much
Love the little jig for the handle holes. Also, why do you do shallow then deeper on your cuts please?
Hey is calling a score cut prevent from getting chipped face on melamine so every piece showing i do a scoring cut of 2mm right after I do fulcut
Is that because with a shallower cut, the blade spins faster so is a cleaner/smoother cut@@CAVjoinery?
Speed is the same, just much less chance of chipping finish when pre-cutting couple mm first
Just cut upside down no chip out.
Important que tu saches que tu bosses vraiment très très bien. Tu devrais demander une augmentation 😊.
On ne peut que te faire confiance quand tu poses une cuisine.
Ça fait vraiment plaisir de te voir travailler. 👌
Thanks so much for sharing your thoughts , as well thank you for watching my videos supporting the channel 🙏🙏🙏🙏
Nice job as always bud. Carry on the good work 👏
Thanks, will do!🙏🙏🙏
Профессионал! Ставлю тебе 1000 лайков, и желаю тебе и твоим близким здоровья.
Thanks so so much nice comment same for you too
Excellent work. Where can I get those tools?
Thanks so much have a look on google for festool
What are you marking on the wall at the very beginning of the video? Is it the plinth height, then the unit height? You make two separate marks, then draw one long line.
I started by finding the highest point of the floor and from there i can mark my 150mm plinth 720mm base cabinet 40mm worktop 52 -55mm space then 720mm wall units then dropped down 60mm for hanging wall brackets
@@CAVjoinery Thanks mate. How long have you been fitting kitchens and bedrooms?
what kind of glue do you use to glue the edge to the table top?
Egger seal adhesive
Very teaching video. Thanks for your time.
Thanks so much for watching !
Respect for the corner joint of the countertop!
Thanks a lot !
nice work, but is it a demo one? I mean wtf with the floors?? looks like a barn. usually ppl do furniture installation on normal and finished floors...
Thank you for watching ,there were 7 flats and I have installed 3 of them kitchen in there
Installing a kitchen on a finished floor is a common mistake as the ground moves, having cabinets installed on top of your floor tiles is counterintuitive.
What is the glue you used on the worktop edges and for the joint?
Waiting for the same answer..
Egger sealant adhesive
What great piece of work at art
Thank you 🙏
Good job, congrats. How many hours did it take for you to complete this kitchen?
Thank you for watching 7 hours one day
@@CAVjoinery7 hours 😮 💪💪💪 the guy we have on the firm takes all week to do a kitchen! no where near as good a job or a kitchen that big. He doesn’t even join the worktops just uses those bars and has me helping lift the worktops and cabinets 😂 you must make some serious coin! Respect to you sir!!
A shame the masons mitre ended up right next to the sink cut out but obviously a kitchen design fault not yours. Can i ask what kind of fixings you used for the wall cabinets? I tend to cut out the plasterboard and nog out the wall if theres nothing behind it.
Thank you for your thoughts.heres a amazon link for them amzn.to/45ibovP and the tool for them herre amzn.to/3ZIQ4yj
@@CAVjoinery Получается, вы крепите кухню на гипсокартон. Я не решаюсь крепить только к гипсокартону. Я делаю крепления чередованием - один в стену, другой в гипсокартон.
How come you did only one pass on the 1st work top city, then 3 or so on the second.
Sorry there were 3 passes i just cut the video down to be short thx for watching
very professional job made it easy with no stress true craftsman...... sub'd
Thanks so much for your support and commenting
Gut gemacht Kollege!
Thanks mate
Hi.
How to contact you for my own kitchen installation?
Very good job.
Antonyo4you2016@mail.com
Очень круто!!!
Thanks 🙏
Brilliant Channel ❤ it for the jigs U make on site etc Workmanship Top Drawer 👏👏👏👏👏. 🖖
Glad you enjoy it! And thanks for sharing your thoughts!
Great workmanship, i almost got a hard on. What a shame the kitchen was done before the floor though. I suppose they will lay a new one on top of that one. Because of the height difference there wont be a clearance anymore for the panel by the floor, you wont be able to open it then.
Thanks is floatinh floor so has to be free to move
Those cam locks on the mitre are a clever solution to a problem created by the planners. They never think about the space needed for the dog bones.
I see ! Thanks for sharing your thoughts !
pleasure to watch as always ,nice video 👍👊
Thanks for the visit appreciate it 🙏
Great Video once again. Thx
Glad you enjoyed it,thanks for watching 🙏
Bro, you simply solved humanitys problem!
22:24min
Glad you like it !thx for watching
Very excellent job, bro🤝
Thanks ✌️
Szkoda że można dać tylko 1👍👏
Thanks so much for watching my video
Tenho uma loja de móveis planejados e nossa maior dificuldade é ter mão de obra especializada, ferramentas e ferragens. Parabéns pelo excelente trabalho.
Thank you for watching my video glad to hear that you’re a professional and still appreciate my work 🙏🙏
Mint job pal 👍
thanks so much
May I ask what brand of this cabinet? Thanks
They were home design if i remember correctly
Best 👏💪
You are !thx
Congratulations Good Jop
Thanks so much
Como siempre un trabajo de calidad y muy profesional. 🌟🌟🌟🌟🌟🇵🇦
Thank you so much for watching my video and sharing your thoughts
Las buenas maquinas también necesitan unas buenas manos que las manejen, el orden y la limpieza son esencial para un buen trabajo, lo que no entiendo de este montaje es como se puede montar una cocina sin estar el suelo puesto
Sometimes we are dealing with this situation where floor is floating so it needs to be separate from the fixed or heavy stuff like kitchens doors walls etc
Fantastic job
Very professional job
Thanks so much
Hello. Good job 👍 what saw blade do you use?
Have a look on my amazon affiliate link amzn.to/3PEhQrk
Ce s-a intamplat cu circularul de este albastru ?
Le-am vopsit crezand ca astfel lumea o sa inceteze sa ma spuna ca fac reclama la scule dupa cum poate ai observat am deslipit si etichetele cu numele producatorului
Шаблон для ручек прикольный . Единственное что, можно было сделать две одинаковые детали, что бы при сверлении с обратной стороны фасада не вырывало.
Thank you it’s ok I used a special drill bit that prevents from tearing out and on this type of material is unlikely to tear out more than screws head can cover 🙏
@@CAVjoineryа что за сверло такое? Кучу перебрал, все равно дёргает
Голландское дсп крепкое и не ломкое как наше
@@harlampios5883сверло-фреза в любом китайском магазине , комплект из четырёх штук около 10 долларов
@@Vov166 что за бред? Любое ДСП будет вырывать сверлом, если конечно на обратной стороне не пластик.
Great job lad.
Thanks
❤❤❤ Good
Glad u like it
Sir,
Your work is very hard & Good quality
Good job c nice ❤❤❤❤
Thank you🙏🙏🙏
Great video .
Thank you for watching and sharing 🙏🙏🙏🙏🙏
Next level fair play mate
Thanks mate
wouldn't you dry plaster out fulm first 🤔🤔🤔 what about damp in to back of units 🤔🤔🤔
Everything is fine ,thanks
Just one thing upsets me a bit why the client hasn't done the renovation of the room prior this masterpiece is done 😮😮
They actually dont care that much this was a 6 flat building for rental purposes thanks 🙏
Masterclass ‼️💯💯💯
👏💪 Magnifique 👏💪👏 Magnifique 👏💪
Thanks 🙏☺️
@@CAVjoinery Merci beaucoup 🤲🤲
I like this very simple
Thanks 🙏
Good job boss
Thanks
How come you never put the plastic sealer on the kick board.
Well you did not see all the videos than
Ishlaringgizga omad
Thanks
Fantastic, bravo 👏 o
Many thanks!
Que gozada verte trabajar! cuanto me gustaría aprender el oficio.
Thanks a lot !
Tight brother bravo
Thanks
Super gemacht 👍
Thanks for watching
Hi is working fast it’s good
Thank you ☺️
What is your carcasses depth..?
560 MM HAVE 50mm VOIDS
Good job 👌 👍 ❤❤❤
Thanks so much
Appreciate it 🙏🙏
Good job 👍
Thanks 👍