Pro painting with a budget gun at home.
HTML-код
- Опубликовано: 26 авг 2024
- In this episode we review the Eastwood concours lt 100 budget paint gun and why this is a great paint gun for home use with a small compressor. I also continue my search for the best budget clear by reviewing the finish 1 fc720 clear coat. can you get a pro finish out of this gun and clear at home find out now!
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com...
In this video(affiliate links)
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
finish1 fc720 clear coat
amzn.to/3NQjdkE
Eastwood Lt 100 1.3
amzn.to/3QfJkTx
3mperformance paint gun
amzn.to/3JTDS4Q
astro sun light
amzn.to/3MMJPl0
Gun review videos
⬇️⬇️⬇️⬇️⬇️⬇️⬇️
3m performance review
• 3m Performance paint g...
sagola review
• Sagola 3300gto a great...
astro evot review
• The best budget paint ...
astro euro pro review
• How to do paint repair...
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com...
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/...
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Go pro 7 black
amzn.to/35ddyAf
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Acer Nito 5 laptop
amzn.to/3wvc2W0
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
how to save a bad paint job
• How to save a bad pain...
How to repair and paint your bumper
• How to save money pain...
How to remove fisheyes from your paint job!
• How to remove fisheyes...
How to save a bad paint job
• How to save a bad pain...
Song: Dipcrusher - Islands (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: • Dipcrusher - Islands (... -----------------------------------------
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.
Hope you found value in this video. Next we'll be testing this gun with other clears like the fc710 , upol ,and speedcoat clears stay tuned and as always thanks so much for the love and support!
how does the finish 1 compare to the nason 498 you mostly use?
@@LuisC202 it's close, I will be doing a comparison video . You'll have to stay tuned. I don't want to let the cat out of the bag just yet .🤣🤣👍
As a home gamer and a newb an affordable slower gun that’ll run on a small compressor is EXACTLY what Im looking for. I doubt very seriously id even notice a slower gun. In my (rattle can)experience I prep for hours just to spray for a few minutes. Id honestly rather things move more slowly. The overspray/material savings seal deal for me. I’m just doing a few panels to make my work beaters look good from across the street.
I love my LT100. I’m not a professional by any means but after learning how to use it on a handful of projects I’ve been able to get pretty flat finishes. I do have to dial the fluid back a decent amount, especially since I have a smaller compressor. I do have to move kinda slow, but slow activator has helped make it possible to do an entire car with it.
I have a older version of this gun in 1.4. I use it more as a back up gun. This clear is amazing for the money and it lasts a long time. I have a car that i put 3 coats and 6 years later still looks amazing
Good to know, I've heard good things about the durability. Thank's for the letting the community know your experience with it.
Thanks for letting us know lol ongetivity as I am repainting my whole truck with fc720.
Shine? Good still?
Thank you for sharing! Could you tell me how tough is the clear coat on stones that you may have experienced over the years especially driving on a highway getting hit from a vehicle in front of you?
Thank you for your response back in advance!
Nice LVLP gun! Summit sells the same thing with a bigger metal cup for $69.99… a must for the DIY with a small compressor 👍👍
yup, parts and needle sets are interchangeable.
Found great benefit in all your gun reviews .
Thanks for doing them!
👍
Finish 1 is what I could find at Napa and I LOVE the clear. It really lays down nicely 👌
Awesome video Chris!! Can beat the price on this gun paid like 60$ for it plus 45 shipping to Canada. Can’t wait to try it! The fc720 was my plan but I look the fc710 up! Seem the perfect one for my repair!
Chris, i made a video of my truck. I want to thank you so much for all your help, inspiration, and direction to make it possible. God Bless my friend.
No problem Luis, that's what the channel is all about. God bless you my brother.
Wow that spray gun lay down that clear coat beautifully. I love how the paint job came out perfect 👍
Appreciate the comment and support! Yes it works well .
Chris, amazing and very informative video. I have 4 antique tractors I'm getting ready to paint and both these items looks like they would do great for that. Thanks for the great video.
Appreciate the comment! Definitely share some pictures of your finished project sounds interesting. Garagenoise247@gmail.com
Summit sells it for 70 bucks, and amazon for 55, is called sprayit 33000 i love it, there is also a lot of copies, but i guess the guys at eastwood make sure you get a quality gun, awesome video👍👍
The eastwood gun is ok, but the needle sets i got are garbage junk. The holes on the aircap was off centered and also on the airhorns.
Thanks buddy I'm ready to clear now that I have confirmation
Great!
Have same gun i love it sprays good i use with speedokote clears and advantage clears does good
Very nice job Chris. Looks like that gun will work fine for small garage shop. Thanks
that lt100 i used it for years I loved it
man i love this channel...
Thanks so much! Appreciate the support!
Thanks for sharing all this with us. I love your videos and am a new subscriber.
Might have to pull it out I haven't used it in awhile but was my first purchase to paint at that time I paid $69 but I bought a warranty and a 2.0 tip to spray primer
Thanks for info on the clear coat . ❤ I believe it was the 721
👍
For the money, these R500 variations are well made guns that remind me of an older Iwatta design-wise. And I just used the SherwinWilliams clear for the first time yesterday. Flowed out well. After drying a few hours, it felt smooth and a bit rubbery? I assumeit it will harden more in time.
Has anyone done a time test on the Finish 1 clear yet? Just curious how long it lasts with sun exposure. I typically avoid the $200/gal clearcoats because the ones I’ve used in the past were normally peeling after 1-1/2 to 2 years. I usually stick with the Sherwin Williams CC950.
Just found you channel. I have some questions about respirators. What should I be looking when buying a repirator ? to paint BCCC ? what filters ? Would you think a full face respirator is needed? And when it comes to single stage Urethanes what espirator is needed ? As you can tell I do not know much. So hoping you can help me me out. Thanks
This is the one I'm currently using comes with goggles and works quite well. I don't always use the goggles but it is a good idea. Single stage and bc/cc same respirator.
amzn.to/4cut7Fj
Right Chris the Eastwood LT100 gun 🔫 mate or the iwatta kiwami 4
I like them both! If you have a smaller compressor the lt 100 is the way to go. Straight up which is better? can't say right now . I need to play with the lt 100 a bit more.
Please do a Review on the Speedokote line of Clears .
Ok I'll put it on the list
I have both LT100 and Summit racing LVLP, they are the same guns, also sprayit 33000, Aeropro R500 and any other R500 spray gun. One thing to watch out for are the air horn holes. My summit gun one hole on the air horn is bigger than the other side (was refunded), and the LT100 needle sets like the 1.5 and 1.7 i ordered the holes on air cap aren't centered and look terrible. Needle sets are interchangable. 3m pps 2.0 S35.
Settings Base: 20-22 psi, fan 5 turns from closed (wide open), fluid wide open. Clear 30 psi, fan 4-4.5 turns, fluid 3 turns from closed/2 turns in from wide open.
Finish1 for me is tough to cut and buff orange peel but denibbing is great, its the only clear i know and use. I always end up with some micro scratches left after i do full cut and buff 1500, 2000, 3000, compound and polish. Can only see it if you look up close. I dont know if other clearcoats stay kinda soft after a few days but i think i may have pushed harder with sandpaper on some areas causing the deeper scratch.
I purchased the 710 to redo my hood, thanks for your tip about using a fast clear to decrease chances of dirt landing to the clear as it dries.
You are right about the fc720 and it's something I've experienced and forgot to mention. The clear doesn't cure as quickly and will leave those fine scratches ,I believe cause it's still a bit soft. I'm hoping this is correct when I test the Fc710 spot panel clear. I wasn't aware about the guns good info appreciate the comment!
@@GarageNoise I forgot to mention I have a 20 gal Husky quiet compressor with the LT100.
@@toycoma98 There you go, do you know what cfm's that compressor produces?
@@GarageNoise 4.0 CFM at 90 PSI, 5.0 CFM at 40 PSI. The manifold regulator it comes with is so slow at recovering pressure. I replaced it with a high flow. Also installed a aftercooler 5" power steering cooler and a 5" muffin fan and a 3/8 water separator before it goes in the tank. Very little water when i drain from the bottom, the 3/8 water separator catches most of it. The pressure is steady when the compressor is on while i'm spraying. It kicks in at 125ish but doesn't drop low enough to cause problems.
@@toycoma98did you notice your CFM output increase with the aftercooler, or just the water content?
im using fc720 to coat my model cars and it's shiny and durable.
I bet that clear looks good on a model car! What do you spray with!
@@GarageNoise i use a iwata eclipse and i thin it down so it doesn't clog
Can you show an example of die back, BTW I have and use the lt100, mostly for primer though.
Yes , I'll do that whan I run across it. Thank's for the support brother!
Another great video Chris! Seems like the perfect gun for DIY garage projects. One question, how long do you wait to spray the base color after spraying the clear base and do you respray the clear base every time you apply another coat of base color?
Thanks brother, If it's hot day I don't wait to spray the first coat of color over the clear basecoat. I'll only put another coat of clear base if the metallic orientation looks off. There's been occasions when i would have to put alternate paint and clear base several times . If you do that you must make sure your allowing 5-10 min flash time between coats . Thank's for watching!
Thanks for the info!
Paint job looks great! What do you reccomended as a step up from the FC720 in clearcoat for a show car finish?
Good question Gary! I don't really use high dollar clears. It's been awhile since I've done a custom paint job. When I was doing it years ago I used matrix ms42 got great results but I was putting on 2 coats and then adding 2flow coats. I hear good things about Tamco clears you might check those out.
I have had good luck with Tamco clear and primer
Ever use Valspar V series? I just got their 5L Euro clear for $160. Can't remember if it was the kit price or if I needed to buy the activator too. (Ewe post-covid California prices for VOC compliance).
Cuál es mejor A610 o está q pinto en este video
Same gun, I might prefer the Eastwood tho
Urgent advice- laid down they best first coat of clear of my entire life, and I ass bumped the hood. How should I fix it before the second coat?
Hard to say without seeing it but if there's no damage to the color put another coat of clear on it and correct it with a cut and buff after it cures.
Chris, questions about this clear coat. Could I possibly use it with other brands like speedokote base coat? And does it hold up pretty well?
Yes it is compatible with other urebase coats. It actually a pretty dural clear . I know of vehicles that were painted 6years ago and still looks great
What’s your favorite budget clear so far?
I don't recommend the 3m performance gun to anyone spraying at home I found out that it wants a massive amount of air flat out I couldn't get mine to 2 bar 🤦
It's easy to use but requires 13scfm compared to the 4.25cfm for the lt100 that's a significant difference.
Lee I have a iwatta kiwami 4 carnt wait to see what its like 👍
@@GarageNoise 13 CFM ain't enough mate ,
@@ANDY-we7mr iwata s are good mate I've used a few 👍
@@leerevell5998 lee is that the kiwami 4
Nice informative video brother, would you say this gun is better than the orange Astro lvlp gun?
I would need some more time using it. I wouldn't say better but it depends on your situation ,if your working with a small compressor the lt1 uses less air. Both are good guns.
What is your favorite gun for clear. I use spies hecker 8180 ms clear. Was thinking about getting a pro light.
I haven't owned a pro lite but I have a couple Devilbiss guns and you can't go wrong with the pro lite. I hear it's a great all around gun.
*Eastwood doesn't produce ANYTHING, they pay to put their name on products.
You can buy a better spray gun for half the money. Great video though!! Like the channel too!
👍Yeah, I have several of these guns from different sellers. It's an R500 and it's manufactured by a company called Rong Peng. They also have and updated version, same gun updated appearance. Appreciate your comment and support!
Whats the difference between 3m performance gun and the 3m accuspray gun??
Thank you for your help.
They are different designs the performance is more of a professional finish. You can get a good finish with the accuspray tho it's just a bit more difficult.
As always ty. I just got a shop space so I'm watching more than ever. Even going to ur earlier videos
Upol or finish clear?
So Maybe it about supply and demand .?. but the napa here was wanting over 200 for the clear.. The other parts store was around the same for another brand.. I really don't wanna order online and wait to finish my car . Did prices go way up since the video ?
It's selling for $123 on line right now. amzn.to/3UIat3y
I actually made the drive and picked it up !.. coarse my harbor freight.. skill level.. lighting ect ect ect lol need improvement lol.. but about to lay it down.. you said you sprayed at 30. It says 8 _ 10.. I believe getting closer helps with this gun but what are your thoughts on this ?
@@jeremyremington8897 what gun? Start about 6 inches away overlap is key. Have a consistent speed. 30 psi to start and 3 turns out from closed on volume.
@@jeremyremington8897I think the question you should be asking is if you live in one of the VOC states that have the same air resource board laws as California and New York for products that produce gases. For the same product I've noticed I've had to pay almost 50% more. Some of it might also be due to post COVID pricing.
Does Eastwood Lt100 come with different size tips for different paints?
I don't think so jut one
You can order different tips@@GarageNoise
Where do i purchase this set?
Here's the clea coat and activator link www.amazon.com/dp/B08NCS2NM7/ref=cm_sw_r_as_gl_apa_gl_i_ZWERSSSZ27AN12VP5N91?linkCode=ml2&tag=garagenoise1-20
Would you recommend this lt100 or the r500 lvlp gun for use with 20 gal compressor?
Same gun , no real difference
How can I purchase the tools dat I need from your wed said for a beginner
Not sure what you ssking me.
@@GarageNoise how can I purchase them because the option in my country is very limited
@@denzelwilliamsamen6897 Amazon, I have a storefront link in my description that has the products and tools you may need.
www.amazon.com/shop/garagenoise
Hey is that gun a LVLP if I missed it sorry
It's marketed as a hvlp .
@@GarageNoise thanks for the vids and all the info man it’s very helpful to a guy like myself that does all the work in my garage lol thanks again
That's almost surely an amazon Neiko gun.
It's made for several different companies this was branded sprayit but summit and Eastwood sell the same gun.
Chris, where i can buy this gun?
amzn.to/39ftJTe
This is my affiliate link
@@GarageNoise thanks a lot! I hope it will be available again soon!
Eastwood store will ship to your house .. I have the LT100 & also the Concourse 2 .. both from Eastwood... works will with 33gal compressor
Summitracing LVLP is the same gun.
And I thought all clear coats were the same.