Fixed! The transparent wheel came loose and fell off, causing the gear to not spin. When I press it back into place, the printer works fine. I'll need to apply glue to ensure it stays in place and spins with the gear.
Hey Kevin....I having the same issue my et15000 start up then makes the scratching sounds when the printer head tries to go back right the error 000031. I cleaned the ribbon and still same thing. How hard is it to fix a et15000 that has the same problem?
Thank you so much for this video my printer hadn’t been working for a few weeks and I kept getting the 00023 error . I just wanted to cry. This video really helped me fix the problem
I had an error 23 on my Epson ET-8550 printer which would cause the printhead carriage to slam to the left side of the printer. My problem was that the (blue) head lock handle was not fully in the unlock position, once I pushed it all the way down the error went away.
lol, this was my issue too. The blue handle was slightly up and was printing fine before, but after a paper jam it wouldn’t work. I was about to take apart my printer before I saw this comment and thankful it worked!
Do you have any videos on unblocking epson wf-2870dwf or similar? This will be the third epson I’ve been unable to unclog using a eBay syringe tube and solution
In my case ribbon was twisted. Turning it back fixed it. Then there was scanner error, which I fixed by actually closing the scanner unit so it is level.
OH so my issue was that my cables to the print head were pulling on the print head when it went to "zero" (to the right). So it didnt go all the way to the right, causing it to go to far left. I literally just tugged a little on the tightest cables (be sure not to do it too much lol).
I saw that the head assembly is dettached from the black rolling belt how to fix it?
Hey 👋🏽, I have this issue with my et 8550. Can you help me please?
Fixed! The transparent wheel came loose and fell off, causing the gear to not spin. When I press it back into place, the printer works fine. I'll need to apply glue to ensure it stays in place and spins with the gear.
Whoever from Hawaii said BCH videos to long is wack. Kevin make your videos twice as long for the haters
😂. I will make the 2nd part with Hawaiian music.
Hey Kevin....I having the same issue my et15000 start up then makes the scratching sounds when the printer head tries to go back right the error 000031. I cleaned the ribbon and still same thing. How hard is it to fix a et15000 that has the same problem?
Did you ever fix this mine is doing the same thing.
Thank you so much for this video my printer hadn’t been working for a few weeks and I kept getting the 00023 error . I just wanted to cry. This video really helped me fix the problem
How did you fix it?
I had an error 23 on my Epson ET-8550 printer which would cause the printhead carriage to slam to the left side of the printer. My problem was that the (blue) head lock handle was not fully in the unlock position, once I pushed it all the way down the error went away.
lol, this was my issue too. The blue handle was slightly up and was printing fine before, but after a paper jam it wouldn’t work. I was about to take apart my printer before I saw this comment and thankful it worked!
Omg same
How exactly do you fix 000023? I have a ET-4800
Do you have any videos on unblocking epson wf-2870dwf or similar? This will be the third epson I’ve been unable to unclog using a eBay syringe tube and solution
It will be the same as others.
@@BCHTechnologies sorry struggling to find those
My epson p600 is doing this could it be encoder sensor ?
Did you ever find the fix?
Where can we order the part .
Hi please help 🙏 me how icon clear error code 000021
Printer model : WF 7710
My print head goes super fast to the left . I change the printhead cable
Epson SureColor SC-P900 error 000024 ???
In my case ribbon was twisted. Turning it back fixed it. Then there was scanner error, which I fixed by actually closing the scanner unit so it is level.
OH so my issue was that my cables to the print head were pulling on the print head when it went to "zero" (to the right). So it didnt go all the way to the right, causing it to go to far left. I literally just tugged a little on the tightest cables (be sure not to do it too much lol).
I think it worked....? thanks hopefully it stays put 🤞
thannnnnnks
Sama seperti printer saya epson l1455
Same issue with a new sc f170
Error 034503 epson wf-7720