Installation of bucking in hopup for AEG by Taktik Airsoft
HTML-код
- Опубликовано: 6 сен 2024
- Step by step installation of an airsoft AEG bucking in a hopup unit.
👉Honor the game™👈
Hashtag us:📌 #taktikairsoft
Tag us:🚩 @taktikairsoft
Web:🌎 www.taktikairsoft.com
🎥 / taktikairsoft
The safety of our viewers, and partners is our highest priority - and we look to each of you to help us protect this unique and vibrant community. It’s important you understand our Community Guidelines, and the role they play in our shared responsibility to keep RUclips safe. Airsoft is not a firearm and can be seen as a sport. The content can be seen by minors as such. The practice or purchase must be done by a legal guardian of anyone under the age of 18. Thank you for being responsible and respecting local laws in regards to airsoft.
This video was very helpful, it was the first time I replaced anything on my gun. Thanks for the video!
You are welcome
Is this a stock VFC Hop Up Chamber ? If so curious to know does the MR Hop + ML Inner Barrel fit ? Me and my tech are having an issue for my G28
This is a generic hop-up unit using a maple leaf bucking rubber edition. You can find these on certain vfcs but now most of the hop-ups are rotary.
This is exactly what I needed lmfao my m4 has just been dropping since I swapped the battle and no matter which way I turned the hop it still dropped, we’ll turns out I wasn’t doing any of this and I thought just pull the old barrel out and put the new one in 😂 didn’t know there were alignments and shit and I probably broke my hop up twisting it 😂👌🏻
Happy it help you 😀
My bucking lip in the rear blocking the BB, I tried several buckings( prometheus purple, vfc black bucking and maple leaf green) and still the same problem
You can shave the lip to help the bb enter the chamber
Will you be doing a GBBR next?
No real standard in gbbr maybe gbb pistol
That’s all cool but what degree is that
That is a 50 degree if I remember
When trying the drop test, the tension of me pushing the bb down the inner barrel is high. How would i make the tension lower?
You stretch the bucking on the barrel
@@taktikairsoft yes I did stretch the bucking down the barrel
@@snowiiilol2753 then you might not have the right combination barrel, bucking and Hopup
after this new silicone bucking swap and also this new omega nub, my bb's are alvays curving to left. What should i do to repair it?
Look at through your barrel at maximum hop-up. You should see if anything is off. Rotate the barrel a little in the hop-up to correct the shape to make it flat
My barrel is stuck in the plastics piece what do I do?
You need to remove the C clip and the brass ring. Put you hopup adjustement at 0. Pull the barrel slowly. You can twist and turn a little until pulled out
Ok thanks
Any thoughts on performance for the MR hopup bucking rubber one vs new silicone version ?
We are still doing evaluations as of now. There seems to be a net improvement in performance with the silicone. They are just more tricky to install properly because they the stretch more and are stickier.
What should i do if it fails first drop test
You should reinstall the bucking. It is most likely just a problem of positioning.
Umm my c clip snapped in half what do I do
You can buy one or 3D print one
Show the hop up window next time.