How to Repaste and Clean Alienware M15 R2 Laptop - Step-by-Step 🧹
HTML-код
- Опубликовано: 21 авг 2024
- In this video i will show you how to open and clean and repaste your Alienware M15 R2 💻 laptop STEP By STEP.
🔵 #1 thermal paste: amzn.to/39BnQjB
🔵 #2 thermal paste: amzn.to/3xDpskD
👉 Tools used:
✔The proper Tear-down kit!: amzn.to/2CATV8e
✔Shop Towels Original: amzn.to/2TFXF0O
✔Tweezers Set: amzn.to/2yvNjVV
✔Guitar Picks: amzn.to/2XJc6lT
✔Electric Screwdriver: amzn.to/2D0iGvq
✔Thermal Paste: amzn.to/3GdTH4s
✔Canned Air: amzn.to/2yzuNf9
✔Alcohol isopropilico: amzn.to/2KoKqil
✔THICK insulated jumper wire: amzn.to/2XL9GTF
✔Kapton tape: amzn.to/3ksJTJD
✔Freeze Spray: amzn.to/31DyAFQ
✔Conformal coating: amzn.to/3iqd12o
✔Air Duster : amzn.to/3oqEw1V
👉 Equipment Used:
✔Portable Soldering Iron: amzn.to/31zPipL
✔Air Duster: amzn.to/3oqEw1V
✔Hakko Hot Air Station: amzn.to/2O1k0PX
✔Nozzle for hot air station: amzn.to/2D21XYM
✔Hakko Soldering Station: amzn.to/2PRrtCF
✔Microscope: amzn.to/2CDqyCb
✔Kester Solder: amzn.to/2D2Bl9R
👉 Diagnostic tools:
USB amp meter: amzn.to/3knyElX
USB-C amp meter: amzn.to/2CbaPMK
On-Screen multimeter: amzn.to/33MV5uP
CHEAP multimeter: amzn.to/2DBnERh
Bench PSU: amzn.to/3kwiyGs
👉 Ultrasonic Cleaning:
ALL Laptops & CELLPHONES: amzn.to/2XLBnvM
Branson EC cleaning fluid: amzn.to/3aaa6Il
🔵 Leave a tip for us via cryptocurrency / PayPal if it helped you out:
› PayPal: is.gd/SL4AoD
› Bitcoin: 1Gc6ekScTjvcnSHoFGvu7nbBo3cyYzfsAL
› Ether (ETH): 0x9dd9F855DAE0586980Ef7786E53e4E275BdC6985
› Litecoin (LTC): LTFQ14vaan4Fc3QqW3cn4NnWV7cvgrXWhk
› Bitcoin cash (BCH): qp4mecuy2q2rqvctdpuv5m0m05y6r8g64c3a48gf78
› TrueUSD (TUSD): 0x9dd9F855DAE0586980Ef7786E53e4E275BdC6985
› XRP (ripple) : rNBVHSfb3iZXYaWm491zVBzYfaxnNnAoCs
› Doge coin: DGspV9CkUqYJUb4ygNVz4aekmgmq5i12Pe
✖ uFixTek is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
#laptopDIY #Laptopservice #laptopteardown #laptopupgrade #laptopreview #DIY #electronics #laptopRepair
![[TF2] The Russian Bear Trap](http://i.ytimg.com/vi/YFNSwz2_rOA/mqdefault.jpg)
Hello, amazing video, much appreciated! although as someone who never done it before it looks like a nightmare. Please please please can you also show how to swap keyboard module on that Alienware laptop? Thanks for your guide.
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, oh boi replacing this keyboards are a true nightmare , here is a video on a different laptop, the steps are the same, remove all internals and remove the rivets.
ruclips.net/video/gmOVtgHf_1Y/видео.html
Should you have any further questions or requests in the future, please don't hesitate to ask me.
cheers🍻
Amazing! Could do it myself with no problemo
It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P
Should you have any questions or requests in the future, please don't hesitate to ask me.
Just got a x16 so I’m trying to learn ahead of time before it arrives 😂 definitely gonna need some tools and a grip pad so I don’t lose the screws
if you need any help or have any request let me know and i will assist you with it.
cheers🍻
How did you remove the rear i/o cover so easily? Mine was so stubborn and wouldn’t came off.
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: sometimes they are a bit more stiff my friend, just use a slight more force on pull and you be fine.
had similar issue ,seem in factory the LCD cable on the right get bunched up ,that's why stuck. shouldn't be
Hello could you please tell me what conector is responsible of the Start button Light? the Alienware logo has some RGB but after finishing maintenance the button works but doesn't have any light so i asume it was not connected properly
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, double check the bridge connector from main board to the left expansion board, imgur.com/a/bhgVTHC
if the pins are not touching well that can cause an issue.
Should you have any further questions or requests in the future, please don't hesitate to ask me.
Can I charge battery externally? Please inform. Regards. Thanks for your informative video.
yes you can with a 12v 2amp charger.
cheers🍻
I got a question about what typeof alienware m15 r2 is that mine looks different inside
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, there are few reversions out there, you may have a reversion of a different motherboard, they pushed out a few different motherboards.
cheers🍻
thank you!
It's my pleasure my friend.
😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
If you have any future questions or requests, please don't hesitate to reach out to me. I'll be happy to assist you.
非常感谢您的视频，这对我帮助很大
很高兴见到你，我的朋友。😊 谢谢你抽出时间给予反馈！如果你想支持这个频道，请点赞、订阅或两者兼具。:P 如果将来有任何进一步的问题或请求，请随时告诉我，不要犹豫。
Hello. Thank you for the great video, cleared up my fan problem.
However I stitched it on, all was fine but then my background dissappears, i can restart it, the background will be there then a minute later it dissappears again. Are you able to help me please.🙏
It's my pleasure my friend.
🫠Regarding your issue: remove the SSD drives and re insert them, this issues normally is because of bad connection. also scan your windows by opening CMD as admin and type:
sfc /scannow
Should you have any further questions or requests in the future, please don't hesitate to ask me.
cheers🍻
Hi Ufixtek, We have any way to check mainboard part number of M15 R2 without disassemble the device?
🫠If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, open CMD and run this code:
wmic baseboard get product,Manufacturer,version,serialnumber
Should you have any further questions or requests in the future, please don't hesitate to ask me.
cheers🍻
thanks!@@uFixTek
It's my pleasure my friend.
Hi, I've lost blades on my left hand fan (looking from the back, from front under the [0]). Is it possible to replace the fan without taking all of the motherboard apart? I noticed you said there was some tape holding it on? How is it attached to the heat sink tubes? I'm not very confident about being able to do it.
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, you don't need to remove the heatsink but you will need to remove the motherboard and flip it. and remove the fan tiny screws on the other side.
take your time doing it, and you won't go wrong.
Should you have any further questions or requests in the future, please don't hesitate to ask me.
@@uFixTek Thank you!
It's my pleasure my friend.🍻
I think I’ll just pay 💰 to get it done 😅 I’d definitely lose screws and break something
if you feel like you may loose or break something, def consider a service shop
great video
It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both!
Should you have any questions or requests in the future, please don't hesitate to ask me.
🍻cheers
MX-4 pumped out for me in about one month ,Gelid CG-Extreme and Kryonaut Extreme are ok. I think Alienwares heatsink might be a bit bent similar to Dell G3s. had 2 exact same m15 ,one ok ,other constant heat issues core 1-2 reaching 100C still.
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your issue, it is very common on having a bad not leveled heat-sink, i highly recommend you to use a more paste type of the thermal paste for e.g the best for the uneven surface use this, amzn.to/4383Lbr
it is more pasty and harder to fill the gaps, and unlike cg or grisly that are runny.
@@uFixTek that's great ,thanks. with dell G3 worked to bend back the heatsink but AW m15 need lot assembling disassembling.
It's my pleasure my friend. 😊 ya they require a bit more of work to get to them.
Should you have any further questions or requests in the future, please don't hesitate to ask me.
serviced laptops (including Dell) dozens of times, but this time after changing thermal paste I get a 3-2-1 beep and no on-screen diagnostics : / mobo replacement?
remove both rams, remove the battery and disconnect he BIOS battery and wait 1h for the board to discharge it self.
plug the rams 1st and the bios battery and the rest and power on and wait 10sec for the boot. if no boot remove one of the rams and use one ram 1st then power on if power successful then power off and place the 2nd ram.
let me know.
@@uFixTek the ram is soldered to the board on M15 R2
ah if you don't have a reballing station, then you won't be able to remove them, because you said "serviced laptops" i assumed you may have the reballing station .
so in this case, i would recommend you to do the same steps without removing the ram, if no positive results given, then you will see yo find a experienced technician to do a reballing and replace the ram chips.
also im not sure if you may have touched with heatsink or a metallic object tot he board and cause a short.
examine the board to see if the heatsink is not touching directly any components.
I fucked up a screen on the last part, any recommendations on getting it out?
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, can you let me know what exactly went wrong and send me to my email few pictures of the error that was made.
Hi, I followed your video steps and my screen is flickering like if there's something wrong with the lcd or probably the GPU, is there anything specifically i can check so i can solve my problem. The screen goes black/deep blue and after i put it to sleep it works again, dunno what to check first
regarding your issue, there is a flex cable somewhere that is not inserted all the way. check the LCD cable 1st.
@@uFixTek thank you sir
got the other ssid configuration. screws hella tight and can't get them out without risking damaging the screw :(
use more pressure on the screw and very slow rotation with a higher pressure.
Soooo i did everything as carefully as possible, just to clean the fans. Put it all back in its place and no power. None from the cord and none from the battery. I can't find anything out of place although I did have one extra screw. Any ideas?
usually those tiny bridge connectors don't make a good contact, remove them and reinsert them. you see me taking them out @9:15
@@uFixTek yup that worked, which is good because it means I'm not out of a job lol thx
@@yofoshizzle66 im glad it worked, enjoy the laptop 💻 for a bit longer 🙃
My usb port from the right side doesn’t work
you will need to reopen and double check all the connections and make sure they are all connected properly.
My toutchpad doesent work
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, did you open and serviced then the touch pad stop working ?, or stoped working randomly ?, was there water dropped on it?, give me more detail of how it came to not work.
@@uFixTek I opened it, did the maintenance, but I removed the battery, after closing it, it turned on normally, but the touchpad stopped working. I looked in the BIOS to see if it was disabled, but I didn't find anything.
remove the flex cable of the track pad from motherboard and reinsert them. double check the cables my friend.
@@luizgm2011There is a button on the keyboard of the laptop to turn the touch pad on and off did you trie that?
@@uFixTektry*