This is actually a not bad one! I was giving up, seeing the ones sold for $70 at Rockler or the cheapo version from Harbour Freights. With those you can drill easily if you want to join the sides of two boards, but if you want to connect it differently, like shown here at 12:36 you are stuck. But this one here, you can take off the 45 degree angle and lay it flat on the board strait at the spot needed. Nice! Might get this one actually.
It works so great Steve that I have already put it through its paces on a few big tops I am working on 😊 I need to build a couple of electric guitars for myself and I want to use it to join the body pieces together and see how it goes 😊 ॐ
Absolute great demonstration again. I would like to have a good doweling toy but the flat pack bits give me horrible flash backs to Argos furniture and IKEA 😭😂 great work as always Chris. 😊
Thank you Karl 😊 I know what you mean about flat pack bits 😂 I needed to demonstrate the furniture connectors, but to be honest the doweling aspect of the jig is brilliant. I usually dowel using traditional measuring methods, but this is so easy I feel spoiled by it 😂 I don't want to rely on jigs too much, as I try to teach young people how to do stuff the old ways, but it will definitely get used a lot on my own projects 😊 ॐ
I missed this the first time around. You did a great job showing the features for it! I’m not entirely sure I have the smarts to set this up, but it looks handy.
Looks like a well made jig. Can be hard (or rather, I find it hard) to line up dowels and so this may be the answer. Thanks for the review and the demonstration. As ever, best wishes my friend. :)
Thank You for this video, because of it I ordered the same jig and it is very solid and robust. There was an extra bushing in the packet, it fits around frostner bit and goes through the cabinet connector hole, perhaps it's for added support?
Thank you Rane 😊 I'm happy that you found the video useful. I have used the jig a lot since the video and it's great. This week I joined 3 meter lengths of old floorboards (around 300 years old) that I salvaged from the old section of the house to make countertops for our kitchen and thanks to this jig it was easier than I expected 😊 I think you are right about the extra bushing, but I hadn't worked it out at the time of making the video. Blessings 😊 ॐ
That little Mallet is a Tiny Workhorse Mark 😊 It's Hard Maple and I've punished it on many occasions. Apart from a few small dents, it's still great 😊 Blessings ॐ
I used to have drawers full of them Frank 😂 I had to buy a few packets to use with the jig, but I was surprised how easy it was to make the joint. I'll need to make something now using them 😊 ॐ
I can definitely recommend it Rob 😊 It is good quality and accurate. I've had other products to review (not from Banggood), they are sitting on a shelf and will never be seen in video or probably be used by me 😂 The products I have reviewed so far have been great 😊 ॐ
![planing wide boards perfectly with electric hand planer / amazing way of planing [woodworking]](/img/1.gif)
Best demo I have seen of this jig yet 👍
Actions speak louder than words. Answered every question I had about how to use these. Thank you.
Thank you 😊 ॐ
Hello my friend. Such tools make our work easier. A nice sharing. Thank you. Greetings....
Thank you my friend 😁 ॐ
Great video. I loved the bit where you set the drill depth by sitting the drill bit on a washer. Fantastic tip thank you 👍
Thank you Paul 😊 ॐ
you couldn't drill the hole for the Furniture Connector Bolt? didn't the jig have the proper bushing for the drill for that bolt?
This is actually a not bad one! I was giving up, seeing the ones sold for $70 at Rockler or the cheapo version from Harbour Freights. With those you can drill easily if you want to join the sides of two boards, but if you want to connect it differently, like shown here at 12:36 you are stuck.
But this one here, you can take off the 45 degree angle and lay it flat on the board strait at the spot needed. Nice! Might get this one actually.
Great video. How do I space the holes evenly on a 400mm board?
This looks like an excellent jig Chris 👍
It's really well made Dirk 😊 I use it all the time 😊 ॐ
I''ve never actually seen a dowel joint made before. I'm not Wood Yogi but that jig looks like something I could use!
It works so great Steve that I have already put it through its paces on a few big tops I am working on 😊 I need to build a couple of electric guitars for myself and I want to use it to join the body pieces together and see how it goes 😊 ॐ
The Wood Yogi good luck with that. Sounds like there’s another dowel jig video in the works!
Mantap 👍👍👍👍👍. Great from Indonesia 🇮🇩❤️
Thank you 😊 ॐ
Great tool that is! It makes work much easier.
It really is easy to use and it arrived at the right time for me 😊 Just as I started to join long worktops for my kitchen 😊 ॐ
Это когда дощечка по ширине как кондуктор.
А если одна шире чем другая? Уже эта технолония не даст такой стыковки.
Или если толщины разные?
Absolute great demonstration again. I would like to have a good doweling toy but the flat pack bits give me horrible flash backs to Argos furniture and IKEA 😭😂 great work as always Chris. 😊
Thank you Karl 😊 I know what you mean about flat pack bits 😂 I needed to demonstrate the furniture connectors, but to be honest the doweling aspect of the jig is brilliant. I usually dowel using traditional measuring methods, but this is so easy I feel spoiled by it 😂 I don't want to rely on jigs too much, as I try to teach young people how to do stuff the old ways, but it will definitely get used a lot on my own projects 😊 ॐ
Great video my friend
Thank you Ercan 😊 ॐ
I missed this the first time around. You did a great job showing the features for it! I’m not entirely sure I have the smarts to set this up, but it looks handy.
Thank you Rob 😊 I've used it a lot since. It's the easiest jig I've ever used and I forgot how great dowel joinery was 😁 ॐ
i think i could have fun using it. to bad i can not a ford it
Looks like a well made jig. Can be hard (or rather, I find it hard) to line up dowels and so this may be the answer. Thanks for the review and the demonstration. As ever, best wishes my friend. :)
Thank you Mark 😊 It works great and actually just when I needed it 😊 Blessings ॐ
Nice review. Thanks, Chris!
Billy
Thank you Billy 😊 ॐ
Да, классная вещь, благодарю за обзор!
Thank you my friend 😊 ॐ
nice tutorial of the tool!
Thank you Ken 😊 ॐ
Thank You for this video, because of it I ordered the same jig and it is very solid and robust. There was an extra bushing in the packet, it fits around frostner bit and goes through the cabinet connector hole, perhaps it's for added support?
Thank you Rane 😊 I'm happy that you found the video useful. I have used the jig a lot since the video and it's great. This week I joined 3 meter lengths of old floorboards (around 300 years old) that I salvaged from the old section of the house to make countertops for our kitchen and thanks to this jig it was easier than I expected 😊 I think you are right about the extra bushing, but I hadn't worked it out at the time of making the video. Blessings 😊 ॐ
That's an impressive gadget alright but the best tool there is that little mallet;-) Thanks Chris!
That little Mallet is a Tiny Workhorse Mark 😊 It's Hard Maple and I've punished it on many occasions. Apart from a few small dents, it's still great 😊 Blessings ॐ
en que lugar se puede comprar?
Hello Sergio 😊 There is a link to the jig in the video description 😊 Blessings ॐ
Великолепная работа! Класс! +
Спасибо мой друг 😊 благословения ॐ
@@TheWoodYogi Благодарю! Делитесь своим творчеством. у вас Великолепные работы!!! Успехов. и. до Новых встреч!
Wicked video, thanks dude!
Thank you Jamie 😊 ॐ
I have so many of those from ikea lol. That tool would come in handy
I used to have drawers full of them Frank 😂 I had to buy a few packets to use with the jig, but I was surprised how easy it was to make the joint. I'll need to make something now using them 😊 ॐ
nice jig
It is my friends 😊 I will be finding many uses for it ॐ
looks pretty good man - I may just get one. cheers!
I can definitely recommend it Rob 😊 It is good quality and accurate. I've had other products to review (not from Banggood), they are sitting on a shelf and will never be seen in video or probably be used by me 😂 The products I have reviewed so far have been great 😊 ॐ
Nice system, that's no IKEA that's for sure.
I'm happy with it Harki 😊 It will get plenty of use here 😊 ॐ
I just found your channel and staying tuned for more videos. If you get time please stop by Seeds and Arrows Frontier. God bless