Info on these engines: Originally, a honda design. Honda CG125's were developed from the CB125. Instead of having an OHC (Overhead Cam) design, it was designed by honda to use an OHV or Pushrod design for third-world markets. The CB-engine apparently had issues regarding camshaft bearings if I recall, so to increase reliability was to pursue an OHV design. This engine became popular for select markets and eventually copies of these engines, most notably chinese copies, started to roll out
would you know if the clutch cover gasket's are the same? and what year the Chinese copied of the cg125? i have a 2007 Baja (Hensim) cg125, its currently on a yamaha blaster and i would like to clean the oil cleaner inside the engine
Zongshen ZS125 or CG125. Before I ran the 200cc water cooled engine in my Gomoto GTR125, this 125cc engine was the original. The 125 has good top end power for its displacement, however, it lacks bottom end torque. Very good engine for beginner riders, as it is not overpowered. If you want reliability and power, I recommend the 200cc engine as it carries good speed with the right sprocket ratio, it produces both good torque and horsepower, also parts like the clutch, transmission and conrod big end bearing last longer than the 250cc engine. In the 250cc engine, the clutch plates wear out faster, 3rd and 5th gear get damaged from the torque as well as the conrod big end bearing wears out faster due engine power. You must remember, these engines are clones of the original honda CG125 design, the fact that they have made various cylinder capacities from a 125cc design is fantastic.
Super sir. இளையதலைமுறை பார்க்க வேண்டிய வீடியோ.whatsapp, face book னு time அ waste பண்ணாம உங்கள் வளர்ச்சிக்கு அறிவியல் முன்னேற்றத்தை பயன்படுத்துங்கள் உங்களுக்கான அங்கீகாரம் காத்துக்கொண்டு இருக்கிறது
I know every one wishes to own his or her own car at some point in time. After all the hardwork and sometimes sleepless nights, we now tend to own our dream car. The joy and happiness that comes from owning your own ride is overwhelming and that will be a dream come true. The previous years has been stressful and confusing in getting my own ride but thanks to Mr Bernard’s Automobiles, he made it look simple and easy for me in acquiring my dream car, I will forever be indebted to him.
It’s amazing seeing people testify the good doings of a transparent individual, I’ve been helped by Mr Bernard’s Automobiles in acquiring a couple of rides for me and my family. Thanks to him
Speaking of transparency and trustworthiness, he is if not, the most sincere human I’ve ever come across. The transactions, dealings, delivery, products are top notch. I will recommend him to anyone who is looking out to get his or her dream car.
Well I’ve not met or transacted with this individual but this is not the first time I’m hearing about Bernard’s Automobiles, I just don’t know how to reach him.
@@jamesbryan8662 Of course you can always reach him if you’re interested in getting any ride of your choice, he is always a busy fellow. This is the number I use to transact with him
WOW ! I've been a Honda mecano for decades , it would take me hours to reassemble that 125 Honda clone . Respect for these guys , they should be hired for F1 pit stops - under 1.5 sec , promised. Amazing.
It is very satisfying to watch people who are so skilled and seem to actually enjoy their job. I have never ridden one, but I’ll bet the Metro motorcycles are a joy to ride on.
it’s like honda civic in motorcycles fkr can burn oil for years and run 😂😂😂 but it’s ugly af i actually hate these bikes but as long as you want something practical this bch does it
Прям рекламное видео - все рабочие чистые, причесаные, одеты в новое, крика дикого в цеху нет, но снятый в конце типок в шортах и шлепках на босуногу попалил всю контору!🤣🤣🤣
They feed the crankcase with compressed air (the black hose) and use the water to check for leaks. If they see bubbles, they know that there's a leak and won't pass the engine until they rectify it.
Lol well son, let me explain . Its so you can see if its airtight and now water gets in. No bubbles, it there bubbles its not sealed right ,therefore re due it again, most engines are suppose to be rain proff amd some can even be submerge 🙏💯💪im a motorcycle mechanic
Parabéns pelo Belo trabalho!! Tenho duas moto com esse motor muito bom, um esta com 30 anos o outro com 25 os dois nunca foram abertos, somente regulagem de válvulas!!
@@marneljabolin2447 na semana passada comprei uma 2001 em mococa sp, com 23 anos de uso so foi trocado pneu bateria e regulagem de válvulas, motor nunca relou uma chave único dono.
Se eu tivesse uma chance de um dia fazer isso junto com esses caras, sou aprediz de mecânico ,isso pra mim seria o maior sonho da minha vida , .me ajudem aí gente
I heard about metro bikes a few years ago and got myself one. Blody hell are they robust! But they have to, if you take a closer look at where they actually drive around. In that video, you can see that they use valve rods instead of timing chains. Open up the valve head, cange the rods and close it.. finished. A timing chain is more efficient but not this easy and cheap to replace. Aaaand you get a nice retro looking bike, like a 70ish Honda
it's a copy of a Honda CG125 engine...or a clone...yes...pushrod top end is easier and cheaper to manufacture and equally reliable...i've ridden several CG's in my long biking career...i'd like one of these Metro 125's...put Honda stickers on it and pretend it's 20 years ago
I like the way they check the end float on all the shafts. If it's to tight it'll loosen up and if to loose that rattle give it character. At least there not building it in the dirt.
Sou mecânico de moto, e um dia fiz um concurso para a polícia militar, passei, mais minha paixão não era ser polícia amo minha profissão, hj a polícia faz o que o governo manda, e eu na minha oficina faço o que amo. Tradução, não segui a carreira policial e sim a de mecânico de moto, ganho 2x mais e faço o que amo. Só tenho a agradecer, polícia onde vai só arruma inimigos, eu onde vou com minha profissão, sou reconhecido e não tenho inimigos. Só agradecer a Deus 👏👏
Wow, so I need a new engine for my 125 cc motorcycle. Now I am scared how many components, little screws, nuts, manifolds, and even the spark wires? Am I right, soark wires to the spark plug? The whole eorking team, make me so now going to buy a ehole engine, and then try and fit it, using a Haynes manual? Ha ha as if!! I can follow instructions, but this is the most important part of the motorcycle. The whole engine.Please can I have one? My bike is Indian, I am Indisn on both sides of my family.Sasjachuan Cree Blackfoot Indian Head Cheiftain nations ggg grandaughter.We love going on a beautiful powerful good horse. So where should it be housed on the moyorbike frame?
@@ferrykoswara4407 yah, but it's manufacturable and repairable locally and at a cost that the low wage workers / families there can afford and that's important in a third world country. I've worked in 17 other countries and wasn't a "stupid American" who thinks that only the American way is the right way. Transportation has to be cheap, rugged and affordable at prevailing wages. I ride a street/race bike at home and don't worry because the roads are usually good and rental bikes in Asia or S. America and there, because of bad roads you want strong old tech, it simply stands up.
Engines are amazing. So many parts that all work together and are made accurately enough to do so. Great video.
Thank you very much!
@@Talentistyacoubou Oumarou
@@Talentist Assalamualaikum mas
Amélie
😂
AK,m
Info on these engines:
Originally, a honda design. Honda CG125's were developed from the CB125. Instead of having an OHC (Overhead Cam) design, it was designed by honda to use an OHV or Pushrod design for third-world markets. The CB-engine apparently had issues regarding camshaft bearings if I recall, so to increase reliability was to pursue an OHV design. This engine became popular for select markets and eventually copies of these engines, most notably chinese copies, started to roll out
Like colombia with its NKD
@@thekyosmaster6946Or México with their well-known Italikas
would you know if the clutch cover gasket's are the same? and what year the Chinese copied of the cg125? i have a 2007 Baja (Hensim) cg125, its currently on a yamaha blaster and i would like to clean the oil cleaner inside the engine
That was just AWESOME. Thank you for the video. Helps me get an idea of all my engines components
Glad it helped. Stay Connected for more.
@@Talentist commado
This is REALLY cool. Lots of respect to the guys putting these together so fast. What a neat way to see all the parts in an engine. Very cool.
جزاك الله خيرا اخي الحبيب وصلي الله وسلم وبارك على سيدنا محمد وعلى اله وصحبه اجمعين
Yo amo las motos benditos Los que fabrican motos dios los bendiga por siempre!
Love how efficiently these are made very satisfying
Zongshen ZS125 or CG125. Before I ran the 200cc water cooled engine in my Gomoto GTR125, this 125cc engine was the original. The 125 has good top end power for its displacement, however, it lacks bottom end torque. Very good engine for beginner riders, as it is not overpowered. If you want reliability and power, I recommend the 200cc engine as it carries good speed with the right sprocket ratio, it produces both good torque and horsepower, also parts like the clutch, transmission and conrod big end bearing last longer than the 250cc engine. In the 250cc engine, the clutch plates wear out faster, 3rd and 5th gear get damaged from the torque as well as the conrod big end bearing wears out faster due engine power. You must remember, these engines are clones of the original honda CG125 design, the fact that they have made various cylinder capacities from a 125cc design is fantastic.
The engine is 200 or 250 . Where is the 125 engine in this video ?
We have these in 150,,,,175,,,200,,,230 and 250cc in Jamaica their the best they can take rev and easy to fix😂🙏👍👍👍👍👍👍👍🇯🇲,
Very interesting & satisfying video. I like the process & team work that are involved to manufacture moter cycle engine. Well done. Keep sharing 👍😊
Glad you enjoyed it. Keep watching for more interesting videos.
@@Talentistaapki shop kaha hain bro
Manden a ecuador esas motos gracias
Super sir. இளையதலைமுறை பார்க்க வேண்டிய வீடியோ.whatsapp, face book னு time அ waste பண்ணாம உங்கள் வளர்ச்சிக்கு அறிவியல் முன்னேற்றத்தை பயன்படுத்துங்கள் உங்களுக்கான அங்கீகாரம் காத்துக்கொண்டு இருக்கிறது
Real respect to these guys!
Good job, guys!
I know every one wishes to own his or her own car at some point in time. After all the hardwork and sometimes sleepless nights, we now tend to own our dream car. The joy and happiness that comes from owning your own ride is overwhelming and that will be a dream come true. The previous years has been stressful and confusing in getting my own ride but thanks to Mr Bernard’s Automobiles, he made it look simple and easy for me in acquiring my dream car, I will forever be indebted to him.
It’s amazing seeing people testify the good doings of a transparent individual, I’ve been helped by Mr Bernard’s Automobiles in acquiring a couple of rides for me and my family. Thanks to him
Speaking of transparency and trustworthiness, he is if not, the most sincere human I’ve ever come across. The transactions, dealings, delivery, products are top notch. I will recommend him to anyone who is looking out to get his or her dream car.
Well I’ve not met or transacted with this individual but this is not the first time I’m hearing about Bernard’s Automobiles, I just don’t know how to reach him.
@@jamesbryan8662 Of course you can always reach him if you’re interested in getting any ride of your choice, he is always a busy fellow. This is the number I use to transact with him
Bots & scammers 🤮🤮
Man I’d love to have one of these motors great job man👍👍
WOW ! I've been a Honda mecano for decades , it would take me hours to reassemble that 125 Honda clone .
Respect for these guys , they should be hired for F1 pit stops - under 1.5 sec , promised. Amazing.
Passei 11 anos com um motor desse de vareta. Muito bom. Econômico, forte e não quebra fácil. Agora estou no 250cc da Yamaha que é outra lenda.
0943
H03rgko7890
WOW!!
Interested...
1
@@mauriciojosedonascimentonascimp😢jbj😢
Installing without explanation we don't know what their doing they are speechless guys good luck toall
It is very satisfying to watch people who are so skilled and seem to actually enjoy their job. I have never ridden one, but I’ll bet the Metro motorcycles are a joy to ride on.
it’s like honda civic in motorcycles fkr can burn oil for years and run 😂😂😂 but it’s ugly af i actually hate these bikes but as long as you want something practical this bch does it
It was very informative 🫳🫲 Thank you, I am also a technician
Muito top essa montagem gostei
I am Nigeria I love your work, I am into motorcycle engineering I need a job
Do Nigerian government not providing you job
@@AkashVerma-hh9this*
Прям рекламное видео - все рабочие чистые, причесаные, одеты в новое, крика дикого в цеху нет, но снятый в конце типок в шортах и шлепках на босуногу попалил всю контору!🤣🤣🤣
Они все в шлепках
海外製品でも、こんだけしっかり作ってくれてたら全く問題ないな🎶
がんばって生産してる👍
Made in India
点検、確認もしっかりやってくれている👍
素晴らしい作業員たちや✨
Хорошее пособие по сборке 125-ки)
5:47 Why are they sumerged in water?
They feed the crankcase with compressed air (the black hose) and use the water to check for leaks. If they see bubbles, they know that there's a leak and won't pass the engine until they rectify it.
I don't know
to see if any leak, they put hose and compressed air inside to see if air is escaping
الله يعطيكم الصحة ❤👍👍👍
Esses são os melhores motores que a Honda já fez isso na minha opinião ok
125 vareta/ cdi / era uma maquina pra rodar 200 mil km
Dist9aww8x8
Hi@@birapm
Hi
Excelente , muy bacano ver todo el proceso de ensamblaje , gracias a quien subió el vídeo 👍
Me alegro de que te guste. Mantente conectado.
fajnie wreszcie pracują przy stole wie piachu sie nie nasypie . dobra robota👍😉
The engine is baptized 05:53 I wish the best for this motor
Simplesmente 💯 sacional valeuuuuuuuu sempre em frente
Excelente trabajo, escribí desde Colombia 👍
why do they dunk the engine in water ? would it not mess up the electronics ? / get into the intake valve ?
Boa pergunta
I d' like to know too.
To check if the engine had no leak points after all assembled, he used pressure so he could see the bubbles from water
Lol well son, let me explain . Its so you can see if its airtight and now water gets in. No bubbles, it there bubbles its not sealed right ,therefore re due it again, most engines are suppose to be rain proff amd some can even be submerge 🙏💯💪im a motorcycle mechanic
It's not water. It's a non conductive solution that doesn't start corrosion.
Be it just a small 125cc engine, I hope it gets utilized well for the entirety of its life.
O melhor motor do mundo .
Izh planet 5 - nice motor!
Parabéns gostei muito do vídeo top demais 👏👏👏👏🤙
Parabéns pelo Belo trabalho!!
Tenho duas moto com esse motor muito bom, um esta com 30 anos o outro com 25 os dois nunca foram abertos, somente regulagem de válvulas!!
😅😅😊
@@marneljabolin2447 na semana passada comprei uma 2001 em mococa sp, com 23 anos de uso so foi trocado pneu bateria e regulagem de válvulas, motor nunca relou uma chave único dono.
wow..mantap..sangat luar biasa💓👋👋👋👍👍👍🙏🙏🙏
😮
Belo trabalho.
Muito bom !!!!🇧🇷🇧🇷🇧🇷🇧🇷
0
Nice video 👍👍👍
Se eu tivesse uma chance de um dia fazer isso junto com esses caras, sou aprediz de mecânico ,isso pra mim seria o maior sonho da minha vida , .me ajudem aí gente
Vai ter que ir lá pra Índia, melhor você ir mandando currículo pras montadoras e tentando até ser contratado
Perfecto
Ну купи себе мотоцикл и разберай и мобирай его
Você consegue do seu mais consegue
@@wills5482 é Paquistão, eu encontrei o site deles
excelente trabalho Deua abençoe 🙏🙏🙏
Excelente video excelente
Video của bạn rất hay ❤️❤️🔔
I heard about metro bikes a few years ago and got myself one. Blody hell are they robust!
But they have to, if you take a closer look at where they actually drive around.
In that video, you can see that they use valve rods instead of timing chains. Open up the valve head, cange the rods and close it.. finished. A timing chain is more efficient but not this easy and cheap to replace.
Aaaand you get a nice retro looking bike, like a 70ish Honda
it's a copy of a Honda CG125 engine...or a clone...yes...pushrod top end is easier and cheaper to manufacture and equally reliable...i've ridden several CG's in my long biking career...i'd like one of these Metro 125's...put Honda stickers on it and pretend it's 20 years ago
This is our proud Metro bike company from Pakistan
Bhsa
Muchas gracias por compartir saludos desde república dominicana
I like the way they check the end float on all the shafts. If it's to tight it'll loosen up and if to loose that rattle give it character. At least there not building it in the dirt.
That’s right ! And they have same t shirt. If only for the video
اول واحد سريع ما شاء الله عليه
Incrível a inteligência humana.
Nice video! Thanks😀
Glad you liked it!
Hard work
Without art the earth 🌍 is only "eh"
Good work❤❤❤
Sad no engine start and test
A customer could have pre ordered the engine and they didn't wanna start and rev it before they sold it to the customer
@@NewEnglandPatriotsfanlol😂😂
@@NewEnglandPatriotsfan0k
nice job 👍👏👍
Esses motores varetados ainda são fabricados até hj na Europa isso é de mais
Pois é ainda são fabricados pq são bons os novos de plástico vem pro Brasil que tem idiota pra comprar
It's Pakistan 🇵🇰❤️
မိုက္တယ္
EXELENTE TRABAJO
BUENOS EMPLEADOS
INDIA Y PAQUISTAN
SON BUENOS EN
TODO TIPO DE TRABAJOS Y BUENOS OPETADORES DE MACHINE SHOP.
1970's manufacturing method
26/01/22 7:56
Igualzinha a cg 1999 aqui do Brasil kkk
@@JeanTussi vdd
Cg 89 biela 440
Dan ternyata mesin 70an yg paling tangguh meski bukan yg berpower
خیلی خوب است من استاد موتور سیکلت 😮😮😮😮😅😅😅
Ótima montagem
Nice information 👌👌
Não importa qual é o seu trabalho, faça-o como se dele dependesse o mundo. 👍🏼🇧🇷🌿
N a o tio
Profesional sekali temanku
Meu Deus que profissão linda!
Sou mecânico de moto, e um dia fiz um concurso para a polícia militar, passei, mais minha paixão não era ser polícia amo minha profissão, hj a polícia faz o que o governo manda, e eu na minha oficina faço o que amo.
Tradução, não segui a carreira policial e sim a de mecânico de moto, ganho 2x mais e faço o que amo.
Só tenho a agradecer, polícia onde vai só arruma inimigos, eu onde vou com minha profissão, sou reconhecido e não tenho inimigos. Só agradecer a Deus 👏👏
Made by Pakistan 🇵🇰❤️
İzlemek çok keyif verici
Ótimo trabalho
Show parabéns 🏍🏍🏍
Bem parecido com o da CG 95 a 99, mas a Honda não fabrica mais esse motor .
Tudo que bom esta acabando
В Китае и Индии все производят, но теперь так.
Ce moteur de Honda CG, indémodable !
Ahhh yes the ole shove the head on without compressing the rings. Love score marks right off the rip.
also who needs a torque wrench for the internals of the engine
Good evening How are you
Hal tersulit yang saya pelajari dari kursus bengkel motor
Nesse mesmo tempo, a Honda aqui de Manaus já teria montado 50 motores. Kkkkk
E metade teria trincado o cabeçote
Wow so good 👍
Thank you 😋
Assembly lube is for amateurs lol.
But seriously, these guys need gloves.
Parabéns pelo trabalho isso é muito complexo de fazer msm sendo simples
nice and clean factory....
Thanks a lot.
Terimakasih semoga for that but कमी belum bergabung
Alloh hummasa
Wow, so I need a new engine for my 125 cc motorcycle. Now I am scared how many components, little screws, nuts, manifolds, and even the spark wires? Am I right, soark wires to the spark plug? The whole eorking team, make me so now going to buy a ehole engine, and then try and fit it, using a Haynes manual? Ha ha as if!! I can follow instructions, but this is the most important part of the motorcycle. The whole engine.Please can I have one? My bike is Indian, I am Indisn on both sides of my family.Sasjachuan Cree Blackfoot Indian Head Cheiftain nations ggg grandaughter.We love going on a beautiful powerful good horse. So where should it be housed on the moyorbike frame?
🇵🇰
Xin chào bạn xem video nếu thấy hay like 👍hello friends
Muito legal tenho uma biz 125 muito boa
great filming and editing
Glad you enjoyed it.
*Why is there no electric starter motor?*
ارخص تكلفة بل النسبة للانتاج والزبون
It's a kickstarted engine
still using old technology - which in other countries already obsolete
@@ferrykoswara4407 yah, but it's manufacturable and repairable locally and at a cost that the low wage workers / families there can afford and that's important in a third world country.
I've worked in 17 other countries and wasn't a "stupid American" who thinks that only the American way is the right way. Transportation has to be cheap, rugged and affordable at prevailing wages.
I ride a street/race bike at home and don't worry because the roads are usually good and rental bikes in Asia or S. America and there, because of bad roads you want strong old tech, it simply stands up.
دیکھ کے بہت خوشی ہوئی یارا پاکستان میں بھی موٹر سائیکل کے انجن بن رہے ہیں۔
I love it good 👍
125 cc robot engine speeding nice time get the best too 😍😍😍😍
बहुत सुंदर परंतु मेरे सभी दोस्तों आप सबों से अनुरोध है मोटरसाइकिल का कोई भी पार्ट्स eAuto से मत मंगवाना चाहें कहीं से ले लेना पर वहां पर मत फसना।
I RELLY LIKE THIS
Stay tuned.
YES VERY MUCH......AM INTERESTED
Boa. Rapaziada. Obrigado. 👋👋👋
Good stuff guys
I am from Egypt I wish to work in this place.
Mantap sekali mas semoga bermanfaat buat ku
Easy work,i can do this in 30 min without machine
Untuk daerah-daerah yang memiliki fasilitas jalanan kurang memadai sepeda motor dengan mesin 125 cc lebih dari cukup untuk pemakaian sehari-hari.
Hanya orang -orang yang ahli di bidangnya yang bisa begitu
Show 👏👏🇧🇷
Good morning. Am in interested in this work bro I Can do it bro 😍😍😍🙏🙏
جاااان❤🔥
I like the moment at the engine was entered to water wqwqwq
Wow😊❤😊❤