⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Well actually P2432 comes from an issue with the secondary air injection valve sensor. If water or dirt gets into the connector to the sensor, it will throw P2432 up. P2430 means the sensor is bad. P2440 means the valve is stuck open.
@@jsmith5443 sensor could just be bad. A year later and i still havent replaced it 😂. I’m horrible but will replace it soon and i’ll give u an update. Idk if my harness is bad but i’ll know after i replace my secondary air injection valve. My valve has the sensor built in so i have to replace the whole thing.
Thank you. I replaced my secondary air injection solenoid, but I do not know if it works. I watched a video saying I can test it by blowing on both sides with my mouth. I need to remove the part and test it. Other than that it seems I either have a wiring harness problem a pump problem, or one or two bad oxygen sensors. I replaced my Bank One Sensor 2 oxygen sensor today. On my live data, it said that my Bank One sensor two showed 99.2%. It does not fluctuate, and has not. That is why I replaced it today, to no avail. Advice would be appreciated. Thank you.
@@RedBaronisaI know I’m two years old but any update? My pump was working for a few days and while I was driving home the same code came up. The truck was already warm so I’m thinking it’s a sensor issue as well. I’ve already replaced the valve and pump itself a year ago
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
(Lllllll
Well actually P2432 comes from an issue with the secondary air injection valve sensor. If water or dirt gets into the connector to the sensor, it will throw P2432 up. P2430 means the sensor is bad. P2440 means the valve is stuck open.
Are you sure? So either my new solenoid is bad, or it's my wiring harness?
@@jsmith5443 sensor could just be bad. A year later and i still havent replaced it 😂. I’m horrible but will replace it soon and i’ll give u an update. Idk if my harness is bad but i’ll know after i replace my secondary air injection valve. My valve has the sensor built in so i have to replace the whole thing.
Thank you. I replaced my secondary air injection solenoid, but I do not know if it works. I watched a video saying I can test it by blowing on both sides with my mouth. I need to remove the part and test it. Other than that it seems I either have a wiring harness problem a pump problem, or one or two bad oxygen sensors. I replaced my Bank One Sensor 2 oxygen sensor today. On my live data, it said that my Bank One sensor two showed 99.2%. It does not fluctuate, and has not. That is why I replaced it today, to no avail. Advice would be appreciated. Thank you.
How about a video on the vacuum pump for the brake booster
Thank you so much
What is the wire that the check valve plugs into called?
How about same code for a truck Toyota Tundra 2007 I replace both pumps already
Check the connection to the secondary air injection valve sensor. This video is more talking about P2440 rather than P2432. P2432 is a sensor error
@@RedBaronisaI know I’m two years old but any update? My pump was working for a few days and while I was driving home the same code came up. The truck was already warm so I’m thinking it’s a sensor issue as well. I’ve already replaced the valve and pump itself a year ago
Stop saying "guys" so much. Otherwise good vid.
Okay guys. Connect your scanner guys. While it's loading guys. Engine light is on guys. See that guys.