![AlarmMuseum](/img/default-banner.jpg)
- Видео 156
- Просмотров 565 495
AlarmMuseum
Добавлен 17 янв 2015
Hello! This channel mainly features intruder/security alarm and fire alarms that I have in my collection or have seen elsewhere.
I also sometimes film civil defence/outdoor warning sirens.
There are separate playlists for the different topics and types of alarms featured plus other things!
Currently about 600-700 devices in the collection as far as I am aware.
Based in England, United Kingdom.
Thanks for taking the time to look at my channel!
I also sometimes film civil defence/outdoor warning sirens.
There are separate playlists for the different topics and types of alarms featured plus other things!
Currently about 600-700 devices in the collection as far as I am aware.
Based in England, United Kingdom.
Thanks for taking the time to look at my channel!
1990 UK Intruder Alarm System | Scantronic 9800
The keypad is not the original one, however the cover/flap for it is original.
Here’s another Scantronic 9800. This one was installed in 1990/1991 with a NovaGard 3 external sounder I think. The Nova 3 has since been replaced by a 2010 NovaGard 2 Metal GA Series.
The endstation was unfortunately subject to being attacked by someone with a pickaxe from what I can tell. Not sure why. As you can tell, it still works, although, there are some faults with it.
Equipment used:
- Scantronic 9800 control unit/endstation
- Scantronic 9825 remote keypad
- Optex Wonderex CX40 PIR
- IntelliSense DT-725D dualtec detector
- Gardiner Technology (GardTec) 16 ohm extension speaker
- Risco GardTec NovaGard 2 Meta...
Here’s another Scantronic 9800. This one was installed in 1990/1991 with a NovaGard 3 external sounder I think. The Nova 3 has since been replaced by a 2010 NovaGard 2 Metal GA Series.
The endstation was unfortunately subject to being attacked by someone with a pickaxe from what I can tell. Not sure why. As you can tell, it still works, although, there are some faults with it.
Equipment used:
- Scantronic 9800 control unit/endstation
- Scantronic 9825 remote keypad
- Optex Wonderex CX40 PIR
- IntelliSense DT-725D dualtec detector
- Gardiner Technology (GardTec) 16 ohm extension speaker
- Risco GardTec NovaGard 2 Meta...
Просмотров: 868
Видео
Bailey Associates H Type Intruder Alarm Bell Box
Просмотров 601Месяц назад
Here we have a rather interesting H Type, with a CQR cover and a Bailey Associates metal backplate, complete with the board of a CQR SO6012 sounder facing rear wards, a Scantronic SAB module, a Kinetic Security amber xenon strobe flasher, and wall, screw and internal cover tamper. Thanks for watching.
Fracarro WL03SE/SEL50X/50W Alarm Bell Box Sounding
Просмотров 560Месяц назад
Here’s an Italian Fracarro siren. Not sure if it’s a wired one or a wireless one, so I don’t know the exact model. It was going off in a power cut, so the backup battery in the panel must need replacing. Thanks for watching.
1996 Intruder Alarm System Demo - Menvier TS700
Просмотров 1 тыс.2 месяца назад
Here’s another TS700 I now have. These systems would have been installed in residential, small commercial and small industrial buildings in the mid 1990s and possibly the early 2000s. This one was installed by a company called Alarm Service Group, who used to install alarms in the south west of England. Unfortunately they aren’t around anymore (apart from a small company in one area called ASG ...
Damaged Gardner Security Nintek Alarm Box
Просмотров 7303 месяца назад
I don’t know what happened to this box - my best guess is a truck reversed into it. It’s been smashed like this since at least 2008. Strobe doesn’t work and all the boards are corroded. Thanks for watching!
1993 Intruder Alarm System Demo - Racal Guardall Rascal Super
Просмотров 1,4 тыс.3 месяца назад
Here’s a simple intruder alarm system from 1993. These would usually be installed in domestic or small commercial buildings. The system consists of a Racal Guardall Rascal Super alarm panel, a Racal Guardall Apollo Plus PIR, a CQR PASP1 panic/hold up button, a Knight Fire and Security I20 Grade 3 16 Ohm extension speaker and a Volumatic Flashguard 100/120 external bell box. Thanks for watching.
Hochiki ESP Addressable Fire Alarm System Demonstration
Просмотров 4963 месяца назад
Here’s an analogue addressable fire alarm system. I have all the addressable devices on loop 1, and a conventional sounder on the sounder circuit to mimic the addressable version of it. Panel: Kentec Syncro Series 6000 Devices: -Hochiki ALG-EN Photoelectric Smoke Detector -Hochiki YBO-BSB Base Sounder Beacon -Hochiki CHQ-WSB Wall Sounder Beacon -Hochiki CHQ-WS Wall Sounder (modified to be conve...
Menvier TS690IDM Intruder Alarm Panel Demonstration
Просмотров 9123 месяца назад
Here’s a TS690IDM (iD based system with a digi modem) from 2009, wired to a TSNETSTAR Starburst Remote Keypad, Aritech EV115 PIR, Elmdene TS443-16 Extension Speaker and a Pyronix Invincibell Plus. The Invincibell has a tamper fault, so it doesn’t stop sounding. Due to this, I wired the negative bell hold off straight to the bell trigger, so it has no power until the panel is in full alarm. Than...
Cooper/Scantronic 9752 Intruder Alarm Panel Demonstration
Просмотров 2,1 тыс.4 месяца назад
Here’s a intruder alarm system that was installed by Westcountry Security in 2006, not long after the company was taken over by Chubb. Therefore, the bell box has ‘Westcountry Security - A Chubb Group Company’ printed on it. Later, Chubb ditched the Westcountry name and stickered over the bell box, keypad and endstation with normal Chubb stickers. Devices: •Scantronic/Cooper Security 9752 Endst...
Pyronix Belle Alarm Bell Box
Просмотров 6724 месяца назад
Here’s a Pyronix Belle made in the early 2000s. Unfortunately the LEDs have corroded off of the wires, but I can easily put replacements in. It’s not as loud as I thought it would be, but when the piezos are facing up, it still packs a punch. I quite like how the sound vibrates the box. Thanks for watching.
Elmdene Chubb Delta 7 Alarm Bell Box
Просмотров 6414 месяца назад
Here’s a Chubb Delta 7. Despite it only being 3 years old, it had a faulty piezo, so I changed it out for a spare I had. Thanks for watching.
Devonport Nuclear Sirens, Plymouth - Morice Town
Просмотров 5325 месяцев назад
Here’s a video of the Devonport nuclear accident siren system, filmed from Devonport Park. The closest siren to the park is shown here; a CS8 made by Secomak (and later Klaxon Signals). Apologies for the blurry footage. Thanks for watching!
CQR Anti-Foam Alarm Bell Box (Modified)
Просмотров 1,1 тыс.5 месяцев назад
So I took this Anti-Foam off a building and it’s the later version with no backplate and a bracket instead. All it had inside was a Gardiner strobe. No idea why. Who puts a strobe in a box and no sounder? Anyway, I ended up sticking a spare Lynteck TK-403 piezo sounder inside it so now it’s ‘complete’ (although Westcountry Security used CQR Intras in these versions, so I guess it’s not very acc...
Pyronix/Castle Care Tech Euro Mini Intruder Alarm System Demonstration
Просмотров 2 тыс.6 месяцев назад
Here we have a Euro Mini from 2014. the keypad is branded Castle Care Tech, however it’s all Pyronix now as I believe they bought Castle or merged together. Devices: -Pyronix Euro Mini -Castle Care Tech EUR-069 Remote Keypad -Pyronix Deltabell E -Kinetic KSB5516 -CQR SC570/WH/MULTI Magnetic Contacts Not too sure why the panel played the old tamper tone for a bit after the entry delay expired. M...
Gardiner Technology NovaGard (5) ‘M’ Delta Series Alarm Box Sounding
Просмотров 6316 месяцев назад
Here we have a NovaGard Delta Metal alarm bell box sounding. I could hear this thing from at least a mile away. It was very loud! You may just be able to hear the Scantronic alarm panel sounding inside the building too. Probably a 9448. The strobe was flashing too but my phone battery ran out before I went across the road to get closer to it. Thanks for watching.
Scantronic 9800 Intruder Alarm System Demonstration
Просмотров 1,3 тыс.6 месяцев назад
Scantronic 9800 Intruder Alarm System Demonstration
Unusual ADT Intruder Alarm System
Просмотров 1,9 тыс.7 месяцев назад
Unusual ADT Intruder Alarm System
DA Systems Abacus 6P Intruder Alarm Panel
Просмотров 1,3 тыс.10 месяцев назад
DA Systems Abacus 6P Intruder Alarm Panel
1999 Texecom Veritas 8 Compact Intruder Alarm Panel
Просмотров 2,6 тыс.10 месяцев назад
1999 Texecom Veritas 8 Compact Intruder Alarm Panel
Tunstall Security (Menvier) TS700 Intruder Alarm Panel Demo
Просмотров 1,9 тыс.11 месяцев назад
Tunstall Security (Menvier) TS700 Intruder Alarm Panel Demo
Aritech CD72 Intruder Alarm Panel Demonstration
Просмотров 3,4 тыс.Год назад
Aritech CD72 Intruder Alarm Panel Demonstration
Texecom Premier 48 Intruder Alarm Demo
Просмотров 2,6 тыс.Год назад
Texecom Premier 48 Intruder Alarm Demo
Risco GardTec Novagard 4 Alarm Box Sounding
Просмотров 1,9 тыс.Год назад
Risco GardTec Novagard 4 Alarm Box Sounding
Fulleon Clarifire Conventional Voice Fire Alarm Sounders
Просмотров 1,9 тыс.Год назад
Fulleon Clarifire Conventional Voice Fire Alarm Sounders
Clifford & Snell Yodalight YL5 (RS Components 566-780)
Просмотров 4,4 тыс.Год назад
Clifford & Snell Yodalight YL5 (RS Components 566-780)
Ahhh this is the alarm I was on about on your other video lol, fun times at my previous house when there was a power cut and most of the estate had these screaming away for 20 minutes lol
Got a quick question, I'm trying to make my own little fire alarm testing board but i need some help with the Power, If i used the fire alarm wire with, Brown, Blue, And i think its white, How could i wire it up to a UK Plug, and if you can. Please make a Tutorial on how to do it? [heres the wire if you needed to know: 2.5mm Red 2 Core + Earth FP200]
The house I previously lived at had alarms somewhat similar to this however they were installed in late 1997 or 1998. Was either the panel or an indoor alarm that made several beeps then moved onto a more quicker beep before going into a more continuous mode for 10 minutes. This was normally after a power cut had ended lol
Having done some research, the alarm panel was a texecom veritas but I couldn’t possibly tell you what the main alarm was lol.. Google maps would be the answer haha
@@alexgarwood6021 might be a Texecom Odyssey 1 or Gardiner Technology NovaGard 2.
Question: Can a 9 volt battery power a Lynteck TK-1010 siren or will it fry it due to being underpowered
@@User_FoxyFurry underpowering anything will never fry it. But I don’t think it’ll sound right unless you put 12-13 volts into it
@@alarmmuseum I briefly used the bell box battery and the siren clicked once but I don't wanna risk letting it sound for long as my mother is home. Plus I now have to sort one of the screw tamper switch wires out, repair the wires going to the comfort LED, reconnect the siren and strobe and I'll sort the battery link wire out at some point Also is my bell box polycarbonate or polypropylene
@@User_FoxyFurry it’s polypropylene.
@@alarmmuseum I thought so It's in remarkably good condition for polypropylene
I’ve been looking to get one of them, but there rare Would you let’s me have yours? (Probs no)
@@Noo-NooForever sorry but this is the only one I have, and I’m not willing to give it away I’m afraid!
Is the Chubb
What’s the battery make/model/type? Thanks
@@tonycummins1251 it doesn’t matter what make the battery is, but I believe inside the panel, there’s space for two 12v 2.1ah sealed lead acid batteries (connected in series to make 24v). I recommend Yuasa and Yucel ones, but any good one will be fine.
I've just moved into a house with one of these. Just trying to figure out how to use it. This video helps.
We had that in my primary school but now I’m in secondary school.
I Actually Bought My First Alarm Box (An ADT Hex)
@@Noo-NooForever awesome!
I love those PIR sensors
Cool (this is Foxy's second channel)
whats the brand of the sounder inside and how many decibels is it
@@arnepetter4327 I’m not sure who made it. It must be around the 120dB mark.
Cool
Wow
the buttons look yummy😋
Hello, i still need help with completing my alarm system, i did reply to your comment 🤝
@@Alarmsnthat I replied to you but RUclips deleted my comment unfortunately.
@@alarmmuseum could you resend
@@Alarmsnthat even RUclips has deleted my comment here too 😂
@alarmmuseum I followed it, my pfp should be me on a bike
There’s An Old One On My House, How Would I Know It Works?
@@Noo-NooForever the control panel inside the house would still be in situ and would normally have a ‘power’ LED lit up. There’d be motion detectors in the corners of the rooms that would light up when you walk in front of them too, unless the alarm earlier than the mid to late 80s. - Sometimes the LEDs in the detectors are deactivated.
@@alarmmuseum Unfortunately, The Panel Was Way Before I Moved In, What About The Siren?
@@Noo-NooForever without the panel, the siren won’t work. The panel is the ‘brains’ of the system.
@@alarmmuseum In Fact, It Could Just Be A Dummy One.
I like it when it was bells
@@kaleem669 I will agree that bells sound more genuine.
@@alarmmuseum Freidland Master Bell. There was a black one that Modern used.
@@kaleem669 the black one is a Tann Synchronome SynchroBell.
Much appreciated. The keypad is still being sold in 2024.
My hotel in fuerteventura spain had a red belle with white sides and is used as a fire alarm instead which i find odd
What's the alarm on the left in the thumbnail is that a YO5/SF/HF? is so could have you got any videos of it?
@@JPLCUK It is an SF/HF yes. I have a video of it somewhere but only short.
@@JPLCUK ruclips.net/video/VE01qpZ7Kyk/видео.htmlsi=gM7VXghmW-n0C-GQ
@alarmmuseum ah thanks have you got any videos of the mother board I've ordered a YO5/SF/HF from ebay and I'm worried its going to sound totally different to what im expecting because I've ordered a YO8/BT recently and it was a different mother board and it sounded way different to what I was expecting
@@JPLCUK I haven’t got a video of the board but if you have Instagram, I can send you a picture at some point?
Awesome system, shame the panel looks like it’s had a few axe hits
@@RWSecurityServices a few too many….
Just asking but did you delete lots of your old videos
@@frankieepurr yes I did. I also put some on unlisted and private. They’re bad quality videos. If you have any you particularly like, I might be able to film a new one (depending on if I still have the same equipment).
@@alarmmuseumI think you should put them back up, it shows how it begun. I mean heck, I’m putting all my really old videos up, which are utter cringe, just to show how far I’ve come. It’s history mate 🤣
@@RWSecurityServices yes I like that viewpoint, but it isn’t happening. 😂
@@RWSecurityServices it’s even a stretch keeping that KAC Sounder and Fulleon Call point video up from 5 years ago….
@@alarmmuseum That’s a shame, but you do what you gotta do 🤣
Sorry I realised I tried mining that box, nice video 😭
Can you do a video of apollo xp95 system... add optical on sounder beaceon base and open area sounder and banshee MT sounder and kac call point with discovery element and advance pannal
@@Elliotgh2 I can’t use an advanced at the moment on XP95 as one is dead and the other I don’t have the level 4 commissioning code for, so I can’t add devices. I have a Morley IAS by Honeywell Zx2Se running Apollo that I hope to get working at some point, but I can’t be bothered at the moment.
I got a playlist on Spotify... its called elliot gh
I’ve got a channel called RW Security & Technology…
What an earth has happened to the control unit, it looks like it’s been in a war zone
@@drphipshiolidge my best guess is someone went on an angry rampage with a pickaxe 😂
@@alarmmuseum or a gun and it somehow survived
@@drphipshiolidge definitely not a gun! Only one hole on the back.
@@drphipshiolidge Scantronic could outrun my gun ?
Why don't you talk in your videos?
@@Elliotgh2 personal preference.
@@alarmmuseum exactly It makes you more cool Like how I don't always talk in my videos
Bulletholes... Wow!
@@txalarms pickaxe holes! I’d be very concerned if it was bulletholes. 😂
Nice novagard 2
My favourite song is blue water by doves
@@Elliotgh2 nobody asked
My 2nd favourite song is charmless man by blur
@@Elliotgh2 nobody asked
@@Elliotgh2don't care and I didn't ask Go annoy someone else
@@Elliotgh2Nobody gives a hoot
Fitted loads of them back in the day. I like each area having it's own LED so you can see when it's set. The 9600 (the LCD version of this) had the LED holes, but they were never actually fitted (i.e. no indication). One tone that I loved on these, the 'fail to set' slow whooping tone when a zone is still open at the end of the exit time.
Hi do you know how to factory reset an optima MK7 panel just got one. I fitted a link between 9 and 19 removed it but the code wasn't reset
@@mrmattandmrchay In my opinion the slow whooping should have been used as the alarm tone instead of just tamper and set fail. I think it sounds great! I have yet to come across a 9600 for removal. I hope to at some point.
@@alarmmuseumI'd love to see a Scantronic 9600 video
Nice one!
Indeed
Cool video!
When you uploading again
I was going to say that
@@Elliotgh2 shut up
@@Elliotgh2 Since when did anyone ask that you were gonna say that, it’s your fault your too slow
@@Elliotgh2no you weren't
Wow !
So it DOES work. How about that!
somebody might have robbed
@@fernlew8828 possibly. The building has been derelict for many years now though so might just be someone smashing stuff for no reason.
@@alarmmuseum guess it could've been vandal-resistant
Anyone gonna ask why there's bullet holes in the panel?
@@autismguy2060 it was a pickaxe 😂 And I don’t know.
how many decibels does it have
Why do u always ask this?
@@mateuszmorgaa8490 bell box about 115?? Panel about 105 I reckon.
My novagard 6 seems quite than yours
The texecom odyssey 5e is my loudest bellbox
@@Elliotgh2 every NovaGard 6 I’ve heard has exceeded the level of an Odyssey E.
Nice
Yay I love your videos
I want one of these lol love alarms so much
If he lets you have an alarm... I will drive nuts
@@Elliotgh2You’re a jealous little kid, you need to get your own stuff, or at least take no for an answer, if they say no!
@Elliotgh2 why haha
@@Elliotgh2 You have got to be the most jealous alarm kid I’ve ever seen
@@Elliotgh2wow, I'm getting an alarm and you're not Cry about it scab
Very old vented bell box cover awesome 0:07
Very nice!
I’m surprised for one of those ADT alarms to have a bell instead of a siren.
@@user-ym9cu5xt1w this is the case sometimes. ADT bought Modern Security Systems sometime in about 1996/7 I believe. The hex box design was made for Modern originally in the mid 1980s, and when ADT bought them, they decided they wanted to use this design for all their boxes - so when ADT came to servicing or upgrading the system, they put their new cover over the old bell, as it fitted due to it being the same plastic mould.
Hey Alarm museum! I had one of that siren here in italy, only diffrence that is branded lince.
Cool! I saw quite a few Lince sirens around Italy.
I just got stung by a bee yesterday😭... i was going to p*e in the trees but i stepped on a nest that had fallen off a tree... I'm itching it now
Did you know I was the bee. It was very fun and I will gladly do it again
I don't care, nobody else cares
Durrr
@@Elliotgh2 Are you by any chance that one dumb kid every class has who just spouts out random stuff nobody cares about?
@@Elliotgh2 I think you should make a video of yourself annoying a load of wasps and have them sting you. That would be pretty funny to watch ngl
Wow that is a high security type H and would of cost a lot more than the standard plastic backplate one back in the day. The inner metal box protecting the sounder and circuit wpupd have made this box a lot harder to destroy too, whereas with most once the cover is snashed off the siren or bell would be right on display. Very interesting video, I have never removed one of these boxes myself before.
Are you planning on doing another video on optima XM 4 ?
POLICE