Видео

I think the Flat screen did something to The magnets inside the IMU having the drone too close to The TV

@frederickhall4106 hey man I hope it works out for you. I bought my X8 2022SE V2 from Amazon also. I didn't realize when I bought it that it used a 3s battery where the X8 Pro uses a 4s battery. Anyone who owns both, be careful. The exterior of both batteries are exactly the same and the wrong battery will lock into place on either drone. The X8 Pro would probably just give you a fault of some kind but a 4s battery from the X8 Pro very well could kill your X8 2022SE

@@MarceloAlejandroSoldavin-jh9gn El TX10A funcionará con el X8 2022SE. En primer lugar, utilice el asistente FIMI para cambiar el TX10A al modo X8 2022SE. A continuación, abra NAVI 2.0, a continuación, vincular el avión no tripulado a la TX10A. El TX10A tiene problemas para decodificar H.265 lo suficientemente rápido. Esto es lo que hace que la imagen se congele momentáneamente cuando se utiliza el X8 Pro. El X8 2022SE codifica vídeo con el formato más grande MP4 (H.264). El TX10A funciona bien con el X8 2022SE.

Gracias! Gracias! asi puedo comprar con confianza y seguridad ! Que Dios Padre lo bendiga!!!

@Uncle_Good_Advice I considered getting another controller. My only real problem with my TX10A is the video feed momentarily freezing. The recorded image on the SD card is fine. My general disappointment with FIMI is why I don't want to give them more of my money. FIMI did eventually get RID approval for the X8 2022SE and X8 Tele. However they will never honor their word on getting the same RID approval for the X8 Pro. FIMI abandoned the X8 Pro and TX10A remote controller and every X8 Pro owner in the process. I'll never buy another FIMI product.

@airy-mountain sadly, no. I am so disappointed. I don't like it when any company dominates the market. As such, I had high hopes for FIMI. I don't like remote controllers that require you to attach your cellphone to them. It's cumbersome to attach everything, and I don't like the idea of my cellphone being connected to Chinese servers or anyone's servers for that matter. When I bought my X8 Pro/TX10A combo, FIMI was the only drone manufacturer other that DJI, Autel, and Yuneec to offer a built in screen RC. When the package arrived I was impressed with the build quality of the drone and RC. On paper, the X8 Pro and TX10A were a direct competitor for DJI Mavic 2 and Air 2 drones at a considerably lower price point. Despite the good build quality, the firmware was and still is problematic. FIMI intentionally sold the X8 Pro and TX10A knowing the system was very buggy. I had hoped that future firmware updates would fix the issues. They did not. As a matter of fact, FIMI no longer manufacturers or sells the TX10A or X8 Pro. FIMI completely abandoned the entire X8 Pro platform and basically doesn't support either unit anymore. The FIMI X8 Tele is based on the X8 2022SE V2 with a different camera. I used to own an X8 2022SE V2 with the standard controller which seemed to be a solid drone but it was supposed to be compatible with my TX10A RC. That turned out to be not true. At least not the one I had. I sold the X8 2022SE V2 because I've lost all faith in FIMI and wanted to recover as much of my money as I could. I still own the X8 Pro, but it's worse than ever. About a month ago, I tried to fly it. In flight I got a GPS and compass failure warning and the drone lost all stability. It took me 5 attempts to land the X8 Pro. Before I could get it on the ground, it flew into tree branches and the shrubs in front of my house. It was a flying weed eater and somehow kept flying. Finally I got the thing to land. One set of props were badly damaged. It's a tough drone, I'll give it that. I did a factory reset of the TX10A but there's no way to delete or regress the drone firmware. I tried to download the latest firmware again but it wouldn't let me. Another problem is although FIMI did get a Declaration of Compliance from the FAA for the X8 2022SE V2 and the X8 Tele, they never bothered to do so for the X8 Pro. Further evidence that FIMI just walked away from the X8 Pro and it's owners. FIMI may or may not make good drones in the future but they'll never get another dime from me!

@Ken-s9o sorry to hear that. My V2 actually works well but it's specs are underwhelming.

@ssb73q the stuttering issue was made better by performing a factory reset on the TX10A and re-downloading the latest firmware. Now, the stuttering problem has been reduced to a very brief freeze or pause in the live feed and it happens less frequently. About once every 5-7 seconds. I strongly suspect that once the inventory is depleted, FIMI will either redesign the TX10A or abandon it all together. It's a shame that FIMI's quality control and shady business practices ruined the TX10A. Had it functioned correctly is would have been a close analog to the DJI Pro RC but at one fifth the price.

@@brutalwarpig Until Fimi fixes the TX10A stutter issue when used with the X8 Pro, I will use the standard controller with an Apple Mini 5 with sun shield. Fimi never provided the ability to use multiple TX10 or TX10A controllers with one drone. The X8 Pro still doesn't have an FAA RID deceleration of compliance. Fimi advertising is deceptive. IMO Fimi will never be more than a 2nd tier drone company.

@stevenwoolfson2433 there was a point that I thought my X8 Pro was recording video with a reoccurring. 5 second freeze. However I just needed to install an H.265 codec. At that point playback on my PC was smooth 4k. The live stream display link between the X8 Pro and the TX10A is in the 1080p 30 or 60 fps format.

@Robertomyspace I wish I could help. To this day I have had the same problem. My live feed from my X8 Pro on the TX10A will freeze for about half a second and that happens once every 2 to 5 seconds. You could try doing a factory reset of your TX10A Remote Controller. It has a factory reset option in the drop down Android menu. It resets just like an android phone does. Of course you will have go through the whole new device process of activating the RC, setting up a wifi or Lan connection, downloading firmware updates, etc. I've actually reset my TX10A twice. Before I reset it the last time. I verified that the firmware updates were current. Yet when I reinstalled the updates, a newer firmware version had been downloaded. It didn't correct the freezing problem but it did reduce the rate it was happening. You will have to do the pairing process between RC and UAV again as well. Generally speaking my TX10A worked better after the factory reset. Always make sure Fimi Assistant is up to date. Don't trust that you'll get automatically notified every time an update is available.

@@brutalwarpig Thanks for the tip, I'll test it by factory resetting it. But in contact with another user with the same problem, he reported that Fimi had told him that there was an error in the electromagnetic interference signal between the control and the drone, so he went to a rural area and there he did not get this error. I'm also going to do this test in a place outside the city. I heard back from Fimi saying that they would release a new update to correct this error.

@Robertomyspace did you have any luck with your TX10A? I can't remember if mine has this option but if you can find a option to change the recording format or "live feed" format from h.265 to h.264, it may help. h.264 is standard MP4 format. h.265 is a more compressed format designed to eat up less memory space on the micro sd card. The problem is decoding H.265 is considerably more processor intensive. The processor in the TX10A is not fast enough to smoothly decode H.265. Those is what causes the stuttering or freezing.

@1EyeInTheSky I'm glad you got your money back. I've only read one other comment in numerous forums and social media platforms that reported a positive experience with FIMI customer service that couldn't be fixed online or by phone. In contrast, there are thousands of negative reviews and comments on Fimi customer service in regards to any warranty claim of any sort.

@donwheeler1683 the X8 2022SE and X8 Tele both have FCC Declaration of Compliance certificates on the FAA Drone Zone website. You should be able to register both of those 2 FIMI drones with the FAA and use their built in RFID

I haven't flown a Potensic Atom but I've always heard good things about it.

I also own the potensic atom 3 Axis Gimbal drone.. THAT DRONE CAN BE 100% TRUSTED. get some range Extenders...... You won't believe the range this drone gets and the PERFORMANCE is unbeatable for the price.. I got the fly more combo.. I love this drone soo much that I even contacted POTENSIC and asked them to make a drone to compete with dji air 3.. I know they can do it. That's how good the POTENSIC ATOM is

Yes I tried several high speed micro sd cards including a Fimi brand SD card. The stuttering live feed image still is a problem.

I'm glad you got a good one. The X8 Pro is an awesome platform if it functions correctly. The problem is, instead of taking the loss and scrapping a batch of defective X8 Pro drones, Fimi knowingly sold them. There's no coming back from that as far as I'm concerned.

@@brutalwarpigYeah, I agree. That is beyond shady. I have the 2022 V2 and was looking at the X8 Tele. Not sure I want to take the risk.

@latymz most likely FIMI learned from mistakes made on the X8 Pro and TX10A. The X8 Tele will use the same batteries as the X8 2022 V2 and the Solink 2 system seems to perform well based on the reviews I've read. I'm pretty sure the X8 Tele is the same drone as the X8 2022 V2. Just a different camera. My experience with the X8 Pro and FIMI's indifference to the problems have made me unwilling to give them another chance. Also, I've moved to building large custom drones like the Arris 900 and Tarot 680 Pro hexacopter. The X8 Tele is probably a decent drone if you get a good one.

@@brutalwarpig I purchased a V2 and a 2022. I already have a DJI mini 4. I think I’ll let FIMI be at this point. I do have 2 older A3 analog drones that I’m fond of for other reasons. It would be great to see some of the builds. Sounds awesome. If I do get another it will be the Tele Pro.

That's basically my advice to anyone who asks me if they should buy a FIMI UAV. I would definitely not buy any newly released FIMI products. FIMI clearly rushed the X8 Pro to market while it was still very much in it's "beta" phase of development. My X8 Pro has been rather problematic. However, my X8 2022SE V2 has worked flawlessly the entire time I've owned it. Remote ID issues aside, They seem to have basically worked out all the issues with their more established platforms. Like you, I too am more than a little pissed at the outright lies regarding remote ID compliance. I actually suspect that FIMI hasn't even applied for a Declaration of Compliance. I say this because in their flight app, there is an on/off switch for turning the RID on or off whenever you want. One of the first RID requirements for an UAV to be approved for FAA RID compliance is that the RID system must be programmed so that the RID system broadcasts anytime the drone leaves the ground and there must not be any means to easily disable or bypass the system. I have the latest firmware updated on my X8 Pro and RC, yet the option to turn RID on/off is still there. So it's pretty clear to me that FIMI isn't even trying to comply. Which is one of the reasons I suspect they will focus on sub 249g drones in the near future. Fimi just started selling the X8 Mini 3. It looks like it's the same as the X8 Mini 2 but with a better camera. Anyone who's looking to get a DJI like UAV system for a substantially lower price point should either be patient until saving enough money to buy DJI, Autel, Anafi, etc. Or accept the fact that if they do decide to buy a Fimi drone there's a good chance they're throwing their money away. Because any Fimi product, particularly new models, will have about a 50/50 chance that the untit will be defective. The hurdles and expense of shipping a drone back to China will make most people not bother and just never give FIMI another dime. It's a shame, really. They really had the potential to be a real contender to DJI. Unfortunately, I believe FIMI may have already damaged their reputation in the U.S. market to badly to recover.

An option to continue to fly your FIMI that is not in RID compliance is to get an RID module. If you are flying recreationally then you can register that module with the FAA and move from drone to drone. If part 107 flying is being done you would need a module for each non compliant drone. They cannot be moved. I hate the above option because it means you have buy something else just to fly your perfectly usable drones. It unfortunate that we have to buy more gear just to fly after we have already paid good money for the drone.

@@brutalwarpigI checked the FAA website for RID DECLARATION. The FIMI X8 SE 2022 has approval.

I actually just got a DJI Air 3 and RC2 fly more combo last week.

@@brutalwarpigHow do you like it? And how does it compare to the V2

EXO drones are nothing more that rebadged Hubsan drones. I would stay away.

Hello, I agree with your criteria, but wind resistance is a determining factor for a very good camera. If you need to fly and the wind is strong, the minis should stay on the ground.

I just bought an Air 3 and I already have a Mini 1 and Mini 3. So I definitely agree that DJI is number 1 for a reason. I still will support smaller companies that make good products. It's better for we consumers because competition drives innovation, lower prices, better/faster customer services and support etc. My X8 Pro will never be able to compete with my Air 3 in many ways but my X8 has some cool features that I would love to see DJI adopt. Like a accessory port for a 4g cellular adapter, megaphone and package release system that are all operated from the RC without the need for a separate transmitter. Also dual flood lights that can be turned on or off from the RC. That's some of the innovation I mentioned. I recently read an article about a drone that has a gull wing V shape and only 2 motors. Or a cylinder that has 2 coaxial propellers that spin opposite directions. Lots of cool new tech. I'm about to begin my custom uav builder journey. My goal is to build a drone that can also be a personal aircraft.

@@brutalwarpigposting that build would be the ultimate for viewers.

I actually recommend both the X8 2022 V2 and the X8 Pro. I can tell you that the X8 Pro has a longer control range. I worked out most of the problems I had with the X8 Pro. I love the TX10A but it has a bit of a latency problem but with the regular controller my X8 Pro works very well. On the other hand the X8 2022 V2 is a wonderful value, great performance, good camera, good range and battery. The X8 Pro uses a 4s 15.4v 3800mah or a 15.4v 5000mah battery. The X8 2022 v2 uses a 3S 11.2v battery. One thing I do not like is that the X8 Pro battery and the X8 2022 V2 battery are in the exact same housing and either battery will lock into place on either UAV. I don't know what would happen if you powered on either drone with the wrong battery installed, but it would probably damage the battery, drone, or both. The X8 2022 V2 uses different, slightly lower power motors than the X8 Pro but they both have the same max speed. My guess is FIMI had to up the battery size/voltage to power the collision avoidance systems in the X8 Pro and went to the 1806 motors to more efficiently make use of the increased battery voltage and handle the additional weight of the battery and collision avoidance system and still have the same speed and flight characteristics as the X8 2022 V2. Both UAV's fly very well, are very stable and have good cameras. Video/photo quality is where you start to see the difference between these UAV's and DJI or Autel drones. The X8 Pro and X8 2022 V2 have the same resolution and capabilities, although the X8 Pro has a slightly larger main camera sensor. The image from either X8 is roughly equivalent to the DJI Mini 2. To answer your questions, yes, I highly recommend the X8 2022 V2. I bought mine from Amazon for $399. That's the base package with only one battery. With the X8 2022 drone you get equal performance in all aspects to a DJI Air 2 with the exception of collision avoidance and a slightly lower performance camera. It's a lot of drone for $399!

@brutalwarpig thank you so much, I was going to purchase it in December with Fimiuav, but I always trust my gut, and I decided to hold a little longer. I started flying drones in November 2023, first ever drone I bought is the Bwine GB2 f7 I got it on black Friday, anyway I felt in love with this hobby but after a month I wanted to go further so I been researching the x8 v2 and the X8 pro. Even though there's a lot of fimi x8 videos on RUclips, they don't have the technical knowledge there more about just testing drones and, of course, subscribe to their channel. But on the other hand, you are extremely technical with what you're describing and knowledgeable with your stuff. Well, thank you very much for taking the time to explain and verifying to me the x8 drone . I'm going to get it with the two batteries since only $499.00 because buying the battery separately is $170.00.

@brutalwarpig By the way, my name is Rudy. I live in Southern California , and I am a professional automotive painter, but I do a lot of customized paint. Cars, motorcycles, and firearms. If you ever have a question about painting anything, let me know. I'm well familiar with all types of paints and brands .

@RUDEalvarez117 thank you! I really appreciate that, and I very well may have some questions for you at some point. My only advice about buying a Fimi drone is that you know going in that the repair or service process requires you to pay to ship the drone back to Fimi in China. Fimi doesn't reimburse this expense even if they determine the problem was their fault. Right now I would recommend the X8 2022SE V2 over the X8 Pro. Once Fimi has gone through the October 2023 production run of X8 Pro drones the second batch will probably be okay. The only noticeable difference between the two is collision avoidance. I personally have never crashed a drone. Probably because the only thing I do I fly high above any obstacles for higher altitude photo and videos. I occasionally will fly near skyscrapers but even then I never get close enough for the collision system to give me an alert.

@@RUDEalvarez117 have you had any experience with high endurance coatings like Ceracote on firearms? I've seen a few DYI coating kits but never tried one.

When another person whoever may be (says) hit and miss then the other person who's owned every fimi drone from beggining to end give or take a model or 2 has had 100% success rate with all of them then it's hard for me to make that judgement because as a dji owner I know full well the other flip side with problems and errors which create a balance with all drone companies...!! Why do most purchase dji refresh or insurance for them..? Because they too either come faulty or have faults and develop them too.. So from another perspective I've had 100% success rate from all fimi drones and still own the first mi drone.. Still going strong..!!

@@MiltonPapa your 🍀 lucky then I happily show the three that don't work and me again I have the A3 2020/2022/2022v2 X2 . x8minix2 x8 mini V2 X2 and a friend had to send his fimi x8 mini back 4 times at his own cost to fimi from Canada so we not all as lucky

Yeah EXO is dressed up Hubsan drones with slightly better radios.

I'm from germany and did it in the year 2020 with the 2020 model. Image was washed out from day one like it was out of focus. Once they accepted to send it back, I packed it up, sent it (cost me 40 Euros) to China. They told me to show the post office receipt. I did and the following day (my package to china was on its way for 2 days at this time), a new drone was on its way to me, arrived 2 weeks later. I got to keep the old battery and of course the new drone had a battery installed. So now i had a new drone (this time the camera was ok) + a free battery. Can't complain about the warranty service!!! By the way the drone now has about 1400km of flying distance on its shoulders and the gimbal motors start to fail more and more. A gust of wind and the image gets tilted 45 degrees and stays like that until restart. That's ok because I'd consider the camera quality outdated anyway, especially if you compare with the X8 pro. I hope i could help.

​@@SN-1006thank you for your comment I am interested in the x8 pro... Will you be upgrading to this drone.. or something else?

@wavez177 I really like my X8 Pro and TX10A. I believe Fimi makes good products overall but I think they rushed the X8 Pro to market before getting all of the issues resolved. I'm in the process of making a comparison video of my X8 Pro and my Air 3. Same day and time, same scene. I know it's not really a fair comparison but it is a real world comparison. The X8 Pro does quite well considering the Air 3 cost more than twice as much as the X8 Pro.

@@brutalwarpig thank you... I am searching for an entry level 4k 60fps drone with level 6 or more wind rating... I incorrectly assumed the fimi x8 pro had this feature...

@@camposvazquez Next drone I will own is a DJI.

I am really sorry for anyone has to deal with FIMI support. FIMI support is fine for things that don't require physically sending the drone back to China. However if you have problems that require Fimi support physically repairing the drone they will ask you to pay for shipping and ship the drone back to China. FIMI will diagnose the issue and they say "if a manufacturing flaw or component failure is found, Fimi will repair or replace the drone. However if they determine that there is a problem, they may blame the shipping company or the consumer for the problem. At this point they'll send an email with the repair and return shipping bill total. I haven't had any direct experience with FIMI and a warranty claim. However the cost to send the drone back to China is surprisingly expensive. In my case the stuttering live feed was irritating but not bad enough to spend $150 to ship the drone to FIMI.

@@brutalwarpig is it really $150? Wow. What are we supposed to do about the remote id? Nothing? I'm required to have remote id in the States. Sent a message (nothing on the drone for a number works) and no response

@itsallminor6133 I had more success talking to FIMI support staff support@fimi.com by first translating the body of my email into simple Chinese. There are plenty of translation apps out there but I use deepL which seems to work well. If you can send the drone without battery back to China, it's a lot cheaper. I was sending the TX10A along with my X8 Pro. The TX10A has built in lypo batteries. So I had to send it as a hasmat type package.

@itsallminor6133 one option is to purchase and use a Remote ID module. Dronetag makes comple kits for around $200. There are lesser known brands for around $100. I would really research the module before purchase. Make sure it already has a Declaration of Compliance with the FAA.

Which model x8 do you have and which controller are you using?

In what way? Does the display say "gimbal not ready" or does the gimbal not move correctly. Do you get a gimbal fault message?

I had very little luck communicating with FIMI support until I translated my email to Chinese before sending. Fimi support is very responsive when you send Chinese language emails instead of English.

FIMI said that if I pay to ship my X8 Pro & TX10A to them and they find a manufacturing defect that then they will repair or replace the drone/RC. unfortunately. Shipping stuff to China from the US is expensive. After all fees $160-$225! I don't trust FIMI. I feel like even if there's a manufacturing defect, FIMI would likely blame it on the carrier. Carrier claims have to be made upon receipt. So I would get nothing from the carrier, at the very least FIMI will make me pay for return shipping or even stick me with a possibly fictitious repair bill! I don't think I'll be buying any more FIMI product from any source other than Amazon or any other seller with an "in house" rock solid return policy. FIMI won't screw around with the largest online retailer in the U.S. Thousands of unit sales daily vs having to resolve a quality issue in an honest and forthright way.

Did you update FIMI Assistant? I've read that is necessary to bind the TX10A to the X8 Pro

Just adding: Fimi recently releases x8 2022 limited edition which uses roklink 4.0 but isn't compatible with tx10 radio. Regards.

@eddielhunter that would explain why, although my TX10A says it can control my X8 2022 V2 I can't seem to get them to link together.

@@brutalwarpig tried everything? I'd suggest watching Brazilian videos about, this model is popular here.

@@eddielhunter didn't know that. Thanks.

@eddielhunter interesting. My TX10A will work with my X8 Pro and my X8SE 2022 V2. I have to use Fimi Assistant to change over from Navi 2.0 to Navi 3.0 and back and pair the UAV to RC each time I switch but it works well. I wasn't correctly pairing the RC at first.

Thank you!

Thanks

I agree completely! Love your country by the way. I was in Bremen and Stuttgart just a few years ago on a work assignment.

@@brutalwarpig stuttgart is only 150 km distance from me, used to live in the states from 1987 to 1988, red wing MN, nice place there, looks alot like the site i live here in germany, just not so many lakes around...cheers

Believe it or not it's a cheap UTG. Here's a link www.opticsplanet.com/leapers-utg-ar15-m16-ergonomic-combat-sniper-pistol-polymer-hand-grip.html

@@brutalwarpig thank you

@@joerodriguez2832 yes sir, you are most welcome.