Видео

Thank you for the video, I’ve got to put a lean to on a building and will use your video in every step. You did a super job explaining everything.

I could not figure out how to get my pump to work. After watching your video I saw the tubes were hooked up wrong. Their directions really SUCK! I connected the tubes the way the picture looked and it was wrong. Thanks for your help. Was thinking the pump was broke.

They sell rafter hangers for the ledger board with a bottom that can be angled to the pitch of the roof, although more expensive than just regular hangers.

That was cool

Why won't you put a top on it, will that help?

Omg absolutely brilliant, you just made my day, I'm now going to attempt this 😂

Great idea! Would not of thought that would work. 👍👍

Music too loud and really off putting.

Did you use all PT?

Great video thank you I have one. I have what covers bottom of the tub looks like a blue speckled inflatable bottom that could be inflated yet ive never seen anybody inflate it on any videos I've watched. Could you help me out with this please? Thank you.

Nice.

What was the point of this video? You showed how yo cut nothing. So the easiest way to do a birds mouth is use your template? What a waste of time.

Build me that wood piece and I’ll buy it from you. I’ll pay the shipping too!

Came here for information, but I have to say it- you look JUST like Charlie Day! Normally don’t comment stuff like that, but had to say it! Thanks for the information! Very helpful!👍🏻🙏🏻

My hubby tried this today and it worked! He was very skeptical at first but went ahead with making the unique post tool, jacking it up on the t-connections. Our pool looks so much better and is level now. Thank you so much for the great idea and demonstration!!

Could do without the music! Otherwise, great idea to fix the pool. Going to try it today.

Great video!

I’m new to bee keeping, how long does it take for your bees to calm down? My bees go crazy trying to sting me when I open the top. I’ll never open them up without a suit. Is that normal in the beginning?

1x2s are wayyyy indequate for any areas with snow. Use 2x4s. Also check with local code for pitch. Flat roofs in snow = no good.

Looks great but dont use an impact driver on those roof screws. Way too tight. Washers will fall apart in a few years.

Will this work to level out a side u need to like put San under it

I am so excited to see this on a Coleman pool! I hard plumbed my daughter’s pool but it took forever to get the right sizes adapters. Had to make a Hayward sand filter work with a Doheny pump. I’ll try to send you a video clip of what I did 😊

Really helpful. I like the way y'all work together. Thanks.

Bro. That's genius

Brother, when you paused to mention your wife and the happiness shown when you did was heart warming!

I would have had at least four straps put down & possibly if I knew it was going to be gale force winds I would take the netting down on the sides.

Very informative This changed my life

MATERIALS PRICE LIST PLEASE!! Coworker wants 4 of these and I gotta know the guesstimated clst

I used 4 48” 2x4 and 3 pavers. one board and paver on each pole next to the one I’m adjusting. 2 boards on the one I’m lifting with alternating with a rubber mallet to slowly raise the height and not strain the pool in only one location

How did you flash against the wall? Building something similar.

Great ideal

Do you have plans/material list for this picnic table project .. TKS

How high can I prop up one side of the pool before failure/ unsafe? I have a slanted yard and it needs about a foot or more of propping on one side

I did this and fixed my pool THANKS!✌🏽

Do you have the measurement maybe on what you used?

Wow ❤😊

Thank you very much for your help that idea level my pool great tool 👍👍👍👍

I think it would be safer for pool liner to drain pool half or more to take stress off the liner before attempting to level. Waters cheaper than a new liner.

This year i decided to counter sink 12x12x1 inch blocks in the ground level with our pool circle. It did however create a bigger slope on one side as it is a bit low but only in two spots. Since its an adult only pool, yes we have zero kids, we feel confident that this year will be okay but i will have to raise these blocks up about an inch or so. It is slightly off from last year due to natural ground erosion through the off months. I wanted to try this approach but given this liner is on its 4th year and patched all over i cant risk the stress on the liner at this point. Great idea though

I've been thinking about getting one since I saw it on a home shopping channel.

Quick question. Great help and thanks for this solution! However, when we were doing this, we had 2 legs move out too far, I'm guessing because of the weight of water and were not able to push them inward. How am i gonna be able to fix that problem? Any ideas?Anybody?

Your dog is so cute he’s like ok let’s go when you got in the truck lol😂

did the metal ring bend?

Thank you very much for your video. When you took the slip clutch apart did it look like it would slip both counterclockwise and clockwise?

No little brackets were cut those are joist hangers.

I did that with my intex pool and it ripped along the bottom liner , the water flowed out like a river

How much sand did you end up using and does the pump work good?

Love it! :)

We have to be related some how cause I was thinking before watching hummmm how can I use my jack.....I hope I don't destroy anything (most times you are going to if you have to say that lol) a bracket like that is something I would try (idk if the would be the same) all the way down to the I don't wanna lose any of my digits hahaha last year I just made braces for the leg on the side that was 4in off cause they whole dang town slants because we are in a vally......worked pretty well but someone rob my wood an legs over there wenter grrrrr and I don't wanna do it again hahahaha

Great idea, I have the same coleman pool but mine is rectangular and not leveled. I'll give it a shot Cheers