Видео

Hi! That makes life easier! Great research, I love the internet for that 🙂

Internet is a fantastic source of information ​@@mrtankalotrctankschannel

Hi! If it’s modelling enamel paint try brush magic by deluxe materials, or there paint stripper, both below. if you want the really stinky kill the cat stuff, try mr hobby 400 tool cleaner! deluxematerials.co.uk/products/brush-magic deluxematerials.co.uk/collections/all-products/products/strip-magic And www.snmstuff.co.uk/product/mr-tool-cleaner-r-400/ Hope that helps! 🙂

I’ll see what I can do 🙂 but there all pretty the same internally Have a great day!

@@gravedigger7510 hello there, don’t worry it’s really easy, just be careful when lifting the hull top off the lower hull not to pull the cables is it fulls, rest it on something. If it’s not 360 with a slip ring the normal connectors and wires are quite sturdy. When pulling the plugs out the board, you can use a very small pair of pointy pliers or tweezers, this is a must if it’s got a slip ring, the wires are very thin and they will pull out the plug if you tug on them to pull the plug out ( but the thicker wires you can pull plugs with). It’s mainly cable tied inside, so just get some cheap cable ties to replace the ones you cut off, and take photos of where everything is before you take it apart. The manual is also very good for showing where everything goes. Thanks for the sub! And I hope that helps! This vid sort of really covers it for most of it 🙂 Have a fab week!

@@gravedigger7510 hi! Yes I use red Tamiya loctite for the arms on all my tanks, and the sprocket bolt too, don’t use something too industrial, you need to get them off! 🙂. For the bearing seat, I’m guessing it does (I don’t have a ztz) but all of the modern heng long tanks (chally, Leo etc) do. Here’s the Leo vid if you haven’t seen it, HENG LONG SHERMAN M4A3 TANK BB UNIT REMOVAL & REFITTING #howto #rctanks ruclips.net/video/DTfFLWpqEaI/видео.html Thanks for the sub! And I really appreciate your watching my nonsense 🙂 Have a great week!

@@johnathanfarquhar1981 my daughter has one that prints pictures! 🙂 I’ve been stuck everywhere.

Hi! Just good old deluxe materials medium cyno superglue. Thanks for watching! 🙂

@mrtankalotrctankschannel Thanks for making videos! That was glue? It looked like some kind of plastic? Your handles were moving side to side as if you ran them through a drilled hole

@ could you paste the vid here ? And time stamp, make sure we’re talking about the same thing! 🙂

@mrtankalotrctankschannel ahh. I think I'm confusing your build with Tankme's build. Thanks for being so responsive!

There slightly different contours?

@ the Posidrive ones have four extra tiny grips between the head and the screw.

😂 I’m seeing ‘people’ about it……

Why thank you! 🙂

@ Between you and I, band wear could be made more interesting; for example that shirt would highlight nicely under UV… the pattern, I mean. But tank commanders? No🤔

@@SCSIII thanks! Far too kind, and if anyone does it will be tongde, they are releasing a leclurc Thanks for the support!

@@RmasterD hi! I just wish they had released an m3 or a m4a4, the M4A3 was solely US used. It guess you could get Clark boards for them? Thanks for watching, and supporting the little community! 🙂

@@RmasterD yes, it’s all the weight of the gear box, puts a heck of a lot of pressure on the first units. Hopefully they will bring out metal stuff for it. And it’s crazy fast! 😂

@mrtankalotrctankschannel One can only hope. It would really up the quality of it to have metal running gear, for sure. I keep mine on the low speed setting, which is still pretty fast.

@@stoffe64 thank you so much! Too kind. That should look really cool, and the flag is just a table flag from Amazon cut down, but sealed with watered down pva where you need to cut it. Thanks for watching and joining the little community 🙂 Have a great Sunday!

@@Ultimatedsn2 on the slip ring? 💍 f it’s the speaker connection it’s just the usual 2 hole white plug.

@@RmasterD that’s very cool, 😎 d never gave the guts to actually serve in a tank!. I tried to make it a mishmash to give it a bit of artistic licence, and I had a reference book with tanks from 2016? On exercise in Germany, looked like they were using up all the desert spares! 🙂 Thanks for watching, means a lot!

@@stoffe64 hopefully it’s helpful 😬

You make everything look so easy to do,i Will sure try to implement your work on mine,Thanks!​@@mrtankalotrctankschannel

Hi! Let me see how and I’ll get back to you, have you tried this? ruclips.net/video/YJjKLGmZBBI/видео.htmlsi=71xfe6lLuCoCHLhU

Thanks! Most people complain they can’t hear a word I say! 😂 Have a great rest of your week! And thanks for watching

@mrtankalotrctankschannel you too 👍

Thanks! That’s too kind 🙂

@mrtankalotrctankschannel no worries

@@frankiedaymodels8529 it’s a sturdy little number! And there’s not much to catch on it when running. And heng long did make 1/16th tank accessible to us all, Tamiya was way out of my price range 😂

@@stephensmith799 very true!

@@davepriddy9263 let me see what I can do! 🙂 jacks for watching and all the support! Have a great Sunday!

@@mrtankalotrctankschannel you too!

@@davepriddy9263 thanks! 🙂 and thanks for watching

Airsoft is my favorite feature! You don’t want to be able to actually shoot stuff with your tank? To each their own 😂

@@KYTANKGUY I can and do "shoot stuff" with my tank but its a 1:1 scale.

@@whya2ndaccount never!! 😂 Harry wants smoke and flash, so his wish is my command!! 😉

Taigen/Torro’s V3 MFU you can hook up your own 6 channel receiver to use your own transmitter, but you lose the ability to activate the machine gun and turn the smoke on and off. Your six channels are acceleration, steering, traverse, elevation, on/off, and steering trim. I think there could’ve been a better way to do on/off where it didn’t need its own channel, or fit machine gun into the elevation function like they did with shooting the main gun, but no. With HL you have to use their remote unless you get their TK16 or TK26 MFU, which I have heard mixed reviews about. I think newer Tamiya you can use your own receiver/transmitter.

@@John-mq9fx no, not all boards, I think taigen/torro? But I might be very wrong!. AliExpress is rather useful for stuff, and most of the vendors are good. And I’m a complete idiot when it comes to electronics, it’s something I need to work on. Thanks for watching it means a lot, and have a great Sunday 🙂

@@williambaker5670 that’s some conversations! And by god you have better vision than me! 1:35! Little man loves it, and it’s really quite tough! Thanks for saying hi, and have a great week!

If anyone will it’s tongde! You could suggest it to the company, they do seem to knock out a lot of new stuff. Just released a Le Clerc Thanks for watching! 🙂

@@h.cedric8157 😂 it’s a process! Hope it went well, and have a great Sunday 🙂

The old Soviet Union had tank factory’s in Ukraine (mainly where the t-64 was developed) but when the Soviet Union fell apart Ukraine kept a lot of the old soviet tanks in the factory’s and storage facility’s. So Ukraine use t-72AV tanks too.

Остатки от СССР и всё. А то написал целый Роман 😂​@@mrtankalotrctankschannel

@@davidjenkins1484 hi, this, RC Tank HAYA CHIEFTAIN, Mega-Steam Diesel smoke fluid, Heng Long 6v metal smoker, Elmod fusion test ruclips.net/video/M800QUnOZJs/видео.html

Hi, no this is a one off, but if you bought a heng long t-90 you could convert it to a t-72b3 with spare parts from the t-72 ERA model by Heng Long

Umm they actually have old t-72AV tanks in storage before the war lots of the newer Russian models t-90 t-80bv etc, oplot, Abrams, leopard 1 and 2 challenger 2, donated t-72 from Poland Slovak etc. Google it, it should come up for you. Thanks and have a nice day.

@mrtankalotrctankschannel no bro Ukrainian doesn't have t90 t80

@ ruclips.net/video/Uxrx4L9nWEQ/видео.htmlsi=MkBap_RYLArM9v83

ruclips.net/video/xFzXiAdfPvw/видео.htmlsi=hdqNZk5QEBMP8AI3

​@@Лишицыну Украины своего вообще нечего нет,это факт ,либо советского союза,либо милостыня от хозяев

Hopefully the tank I based it on is still all okay. Thanks for watching

Das stimmt🎉🎉🎉 deswegen laufen alle zu uns😂😢😢