N3VAN Amateur Radio
N3VAN Amateur Radio
  • Видео 40
  • Просмотров 138 645
2024 Solar Eclipse POTA Activation with My Daughter
Hey everyone, I am back! Sorry for the long absence.
My daughter Katie was very excited about the 2024 Solar Eclipse, so why not enjoy it doing a POTA activation! She loves talking to people and mostly hunting parks.
And while the eclipse where we were was a bust due to clouds we had a blast out in nature!
But yes I am back and be on the lookout for more videos to come ;)
73, Matt N3VAN
Просмотров: 106

Видео

K9DP QRP BCI Filter Kit Version 2.0 Build
Просмотров 4315 месяцев назад
Today I am building the K9DP's QRP BCI Filter Kit version 2.0. This is a must have piece of kit for your comms bag especially if you are running a Xiegu radio such as the x6100 or G90, which I both own. It is a very simple build for those learning soldering. The only challenge is the BCI filter moves during soldering which can easily be solved by using a pair of pliers like I did. Get your kit ...
Yaesu VX 6R Version 4 Board MARS Mod
Просмотров 2,1 тыс.5 месяцев назад
Happy New Year Everyone! Thought I would make a quick video on how to MARS mod your Yaesu VX-6R with the latest version 4 board that has the solder bars (bridges). This is a very quick video for those that have the Version 4 board and were asking if it was any different, it is not just a solder bar not a blob. 73, Matt N3VAN
Xiegu X6100 DC Jack Replacement
Просмотров 4466 месяцев назад
In today's video I replace a damaged DC jack on a friends Xiegu X6100 QRP radio. In a previous video I disassembled his radio to get to the component that was damaged. Xiegu X6100 Disassembly Video: ruclips.net/video/88gTpKiw_nw/видео.html Replacement DC Jack: www.digikey.com/en/products/detail/adam-tech/ADC-096-2-T-R/9832158 Heat Resistant Silicone Mat: countycomm.com/products/awesome-roll-up-...
Charge Your Yaesu VX-6R & Other Yaesu Handhelds Using USB C Cable
Просмотров 3,6 тыс.6 месяцев назад
Found this great way to charge your Yaesu VX-6R or other Yaesu handheld radios using a single USB C cable. The cable is specifically designed to ONLY output 12V or less to your device unlike some that can go over and damage or destroy your radio. This is a great addition to your comms gear or emergency bag(s) so you can charge your Yaesu HT during an emergency. Warning: Always check the output ...
Xiegu X6100 Disassembly
Просмотров 5 тыс.7 месяцев назад
Hey everyone! Long time no video. I missed you guys but have been traveling to Hamfests and dealing with work. I am finally back making more videos and decided to make one for disassembling the Xiegu x6100 QRP radio to fix a friends broken DC power jack. If you have any questions please put them in the comments. Will be making a follow up video on how to replace the DC jack shortly. 73, Matt N3VAN
NanoVNA H4 Stuck in DFU Mode
Просмотров 9939 месяцев назад
Hey everyone A viewer commented on the NanoVNA H4 firmware upgrade video stating that it was stuck in DFU mode and he was unable to get it out of there. This issue can happen from time-to-time. There is a few options to fix this problem so I asked the viewer to send me their NanoVNA H4 so I may attempt to fix it and provide some guidance for others that may have this issue. In this video I show...
Xiegu X6100 Firmware Upgrade & WFView Setup
Просмотров 13 тыс.9 месяцев назад
Hey everyone, it has been a very busy August! Today I will be showing you how to upgrade the firmware of your Xiegu X6100 as well as setting up wfview. Wfview is an open-source software that allows rig controil and a bunch of other features mainly with Icom radios but now it will work with the Xiegu x6100 using the IC-705 configuration. Latest Xiegu X6100 firmware: www.radioddity.com/blogs/all/...
How To Tune An End Fed Half Wave Antenna
Просмотров 12 тыс.10 месяцев назад
Hey everyone! A lot of people asked me how do I tune an end fed half wave antenna wire. Well today I figured I would tune two of my antenna wires, one 26 AWG Polystealth and another 22 AWG Silicone for a family trip down to Virginia. EFHW's are very simple to tune but make sure you fold or bend the wire before thinking of cutting the wire as once the wire is cut it is a pain to add wire. Chapte...
Upgrade Your Stock Yaesu VX-6R Antenna!
Просмотров 3,4 тыс.11 месяцев назад
Is it worth upgrading your stock Yaesu VX-6R antenna to a Diamond SRH320A or Comet HT-224? Yes it is!
Baofeng UV-9R Plus vs Yaesu VX-6R Waterproof Test
Просмотров 1,3 тыс.11 месяцев назад
Baofeng UV-9R Plus vs Yaesu VX-6R Waterproof Test
Yaesu VX-6R 6M Field Test
Просмотров 2,3 тыс.11 месяцев назад
Yaesu VX-6R 6M Field Test
Canadian Wildfire Smoke POTA Activation at Park K-8879
Просмотров 231Год назад
Canadian Wildfire Smoke POTA Activation at Park K-8879
Memorial Day 2023 Radio Fun - POTA Hunting & Net Check-in with YL Katie!
Просмотров 338Год назад
Memorial Day 2023 Radio Fun - POTA Hunting & Net Check-in with YL Katie!
Replacing Bad Micro Switch on Ham Radio Hand Mic
Просмотров 150Год назад
Replacing Bad Micro Switch on Ham Radio Hand Mic
POTA Adventures Park K-1430 Tyler State Park on Apr 17th 2023
Просмотров 153Год назад
POTA Adventures Park K-1430 Tyler State Park on Apr 17th 2023
Palm Radio Palm Mini Iambic Paddle with Magnet Add-on
Просмотров 332Год назад
Palm Radio Palm Mini Iambic Paddle with Magnet Add-on
POTA Adventures Park K-4358 Jacobsburg State Park on Apr 13th 2023
Просмотров 210Год назад
POTA Adventures Park K-4358 Jacobsburg State Park on Apr 13th 2023
HF Band Conditions During April 23 2023 Solar Storm
Просмотров 1,1 тыс.Год назад
HF Band Conditions During April 23 2023 Solar Storm
POTA Adventures Park K-9006 PA SGL 315 on Mar 26th 2023
Просмотров 204Год назад
POTA Adventures Park K-9006 PA SGL 315 on Mar 26th 2023
Minion SDR Outdoor Fun with SSB Contact to Germany with 5 Watts!
Просмотров 560Год назад
Minion SDR Outdoor Fun with SSB Contact to Germany with 5 Watts!
NanoVNA H4 Setup & Calibration
Просмотров 18 тыс.Год назад
NanoVNA H4 Setup & Calibration
POTA Adventures Park K-8837 PA SGL 139 on Mar 19th 2023
Просмотров 214Год назад
POTA Adventures Park K-8837 PA SGL 139 on Mar 19th 2023
NanoVNA H4 Firmware Upgrade
Просмотров 14 тыс.Год назад
NanoVNA H4 Firmware Upgrade
POTA Adventures Park K-8893 PA SGL 196 on Feb 21st 2023
Просмотров 311Год назад
POTA Adventures Park K-8893 PA SGL 196 on Feb 21st 2023
Yaesu VX-6R Power Output Before & After Mars MOD
Просмотров 8 тыс.Год назад
Yaesu VX-6R Power Output Before & After Mars MOD
POTA Adventures Park K-8866 PA SGL 168 on Feb 19th 2023
Просмотров 410Год назад
POTA Adventures Park K-8866 PA SGL 168 on Feb 19th 2023
POTA Adventures Park K-8902 PA SGL 205 on Feb 6th 2023
Просмотров 217Год назад
POTA Adventures Park K-8902 PA SGL 205 on Feb 6th 2023
How to Build a 1:1 RF Choke
Просмотров 2,7 тыс.Год назад
How to Build a 1:1 RF Choke
Winter Field Day 2023 After Action Report & POTA K-8855 Activation
Просмотров 262Год назад
Winter Field Day 2023 After Action Report & POTA K-8855 Activation

Комментарии

  • @darylcheshire1618
    @darylcheshire1618 9 дней назад

    I bought my second roll of 16 gauge speaker wire.

  • @RobertMacCready
    @RobertMacCready 13 дней назад

    By cutting the wire are you not affecting all the bands. And would it not affect the low SWR on ALL bands? Also, does the Nano VNA have good instructions that come with the unit? I have a OCF end fed antenna and need to see where I'm at with SWR.

  • @mickgatz214
    @mickgatz214 13 дней назад

    Thanx Matt, for the 'tear down'. Interesting to see the inside/s. Looks well constructed. It really amazes me how tiny and fully functional radios have become over the years! Of course, as soon as I got mine, the 6200 was realeased and the price of the 6100 dropped...oh well! 😂 Cheers! 👍

  • @sparky5860
    @sparky5860 15 дней назад

    By far the best EFHW tuning video on RUclips……. Hands down……

  • @jwfox54
    @jwfox54 19 дней назад

    Thank you, this is excellent

  • @mikevanright
    @mikevanright 21 день назад

    Nice description! Search for “M0XXT Anttenna CALCULATOR” - also a nice tool ;) 73 from Austria

  • @AndrewMurphy8383
    @AndrewMurphy8383 22 дня назад

    When you wrap the torrid do you start counting from the start or the first full wrap

  • @crd716
    @crd716 22 дня назад

    For anyone having issues with windows saying that the latest version is already installed, try manually checking your install location and running the driver installer, then go device manager and update driver, then browse, pick from list, and pick STM Device in DFU Mode. Mine also kept updating it after, so I had to delete the Guillemot folder that had the wrong drivers (Just search up Guillemot STM Driver if you need more details)

  • @albertl6963
    @albertl6963 24 дня назад

    I got the Japan version and can't tx past 440. Can do same mod?

  • @justsayingforafriend7010
    @justsayingforafriend7010 29 дней назад

    Don't Remove the solider.... Just use a dental tool or a razer blade. Just snap it off. It's so tiny it comes right off...

  • @N3WERHamRadioElmer
    @N3WERHamRadioElmer Месяц назад

    Sooo want that Nano STL file it's pretty cool N3WER 73

  • @matt19218
    @matt19218 Месяц назад

    After I just asked a scientist about this your video explained it out of 10 videos you were the only one who explained how it effects electronics

  • @daviddyessii1126
    @daviddyessii1126 Месяц назад

    Can the Firmware be updated?

  • @leftcoastexploring1389
    @leftcoastexploring1389 Месяц назад

    great video thank you!

  • @BluesAndMoreItalia
    @BluesAndMoreItalia Месяц назад

    hi. nice video. i'm gonna start with my diy UnUn 1:1 soon and i got a question: why 19 windings? usually i've seen videos with the usual 10 windings on a 43 mix....if you have explained during the building, i messed it

  • @test-uc2sc
    @test-uc2sc Месяц назад

    After attempting to follow the updating procedure in the previous video, my Screen is blank, and I get an error message saying "The last USB device you connected to this computer malfunctioned and Windows does not Recognize it" . The device does not show up in the Device Manager/USB Controllers listing now. Is there a "factory reset" button? Thanks.

    • @n3vanradio
      @n3vanradio Месяц назад

      Sometimes this method works other times you have to do the hardware method. 1. Open NanoVNA-H 2. Short VDD with BOOT0 3. Turn on NanoVNA-H --->>> White display = DFU mode 4. Write Firmware. Hope this helps! 73 Matt N3VAN

  • @brucesinclair9628
    @brucesinclair9628 Месяц назад

    I've been looking at what frequencies this mod inlocks and I'm looking to see if it unlocks 154.000 - 169.000 thanks in advance

    • @n3vanradio
      @n3vanradio Месяц назад

      Hey Bruce, I just took the VX-6R out of my vehicle comms bag and gave it a try and yes it does unlock 154.000 to 169.000. 73 Matt N3VAN

    • @brucesinclair9628
      @brucesinclair9628 Месяц назад

      @@n3vanradio Thanks for getting back to me, mod done and working as expected !!

  • @thomaskallmyr
    @thomaskallmyr Месяц назад

    När man beskriver fotosyntesen brukar man skriva 6 H2O (vatten) + 6 CO2 (koldioxid) + ljusenergi → C6H12O6 (druvsocker) + 6 O2 (syrgas). När man förenklar säger man ofta att koldioxid blir till syrgas, detta är faktiskt fel. Om man kunde spåra O2 molekylen bakåt så kommer man se att syret kommer ifrån en vattenmolekyl som spjälkats sönder, inte i från en koldioxidmolekyl. VAD SAKEN GÄLLER= FELBEHANDLING AV MIN PERSON SEDAN 1976.... 1976 VART JAG PÅ UDDEVALLA SJUKHUS FÖR BLINDTARMSINFLAMMATION. JAG OCH JAN THORSTRÖM BLEV DÄR PÅ UDDEVALLA LASARETT,VITTNE PÅ DANMARKS NATIONALDAG,TILL ETT MORD PÅ EN LITEN 12-ÅRIG FLICKA,VARS PAPPA HETER INGEMAR. EFTER ATT JAG I MILITÄRTJÄNSTEN,FYRA MÅNADER,NÄMNT FÖR REGEMENTS- -LÄKAREN PÅ ARTILLERIREGEMENTE NUMMER 9,FEMTE KOMPANIET-SÅ KOLLADE LÄKAREN UPP MIN UTSAGA,MEN LÄKARNA PÅ UDDEVALLA LASARETT HADE "MÖRKAT" BORT VÅRA VITTNESMÅL,MITT OCH JAN THORSTRÖMS,VI BLEV VITTNE TILL FLICKANS SISTA 20 SEKUNDER I LIVET-LÄKARNA SKREV ENLIGT FADERN,"DÖD GENOM PLÖTSLIG OLYCKSHÄNDELSE"-OCH INGENTING VART NÄMNT OM VAD SOM EGENTLIGEN HÄNDE. SÅ 4 MÅNADER MILITÄRTJÄNST,OCH SÅ SKICKADE MILITÄRLÄKAREN MIG TILL MARIESTADS PSYKIATRISKA KLINIK-FÖR BEDÖMNING OM JAG SKULLE HA FÄNGELSE ELLER FRISEDEL-DÅ SKYLLDE MAN PÅ ATT JAG BEGÅTT ORDERVÄGRAN. DETTA GJORDE MIG GRÅTANDE,INTE HADE JAG BEGÅTT ORDERVÄGRAN INTE. FRISEDELN VART DÅ ETT FAKTUM-DÅ JAG LÄMNADE ÖVER DET BRUNA KUVERTET TILL KOMPANICHEFEN PÅ 5 E KOMPANIET,SOM JAG BEORDRATS AV DOKTOR KATZ-PÅ MARIEBERGS PSYKIATRISKA KLINIK,BLEV K-G,KOMPANICHEFEN OERHÖRT UPPRÖRD, "VI HAR INTE NÅGRA KLAGOMÅL PÅ DIG KALLMYR,DU HAR SKÖTT DIG PERFEKT,BÄDDAR SÄNGEN,SKÖDER DINA TIDER OCH PERSEDLAR OCH VAPENVÅRD-DU KOMMER SNABBT ATT STIGA I GRADERNA-DET FINNS INGEN ANLEDNING TILL ATT KALLMYR SKA HA FRISEDEL...." EFTER ETT TAG FICK JAG TÅGBILJETTEN,OCH LÄMNA IN MINA PERSEDLAR OCH KSP M/60-MED HJÄLM OCH ALLT. JAG TOG MIG NÄR DE ANDRA SKULLE PÅ EN FLYGÖVNING,OCH HADE GÅTT TOG SIG ETT BEFÄL TIDEN ATT HJÄLPA MIG ATT LÄMNA IN OCH STRYKA,EFTERSOM JAG LÄMNAT IN ALLT MATERIAL. JAG TOG MIG TILL TÅGCENTRALEN I KRISTINEHAMN,DEN STAD JAG VART KRIGSPLACERAD I,OCH STEG PÅ TÅGET....I MIN KUPÉ SATT EN KORPULENT ILSKEN ÄLDRE MAN OCH ORERADE ÖVER ATT JAG FÅTT FRISEDEL-HADE DET VARIT I KRIGSTID HADE JAG FÅTT KRIGSRÄTT OCH ARKEBUSERING-M.M. EFTER ETT TAG KOM TÅGKONDUKTÖREN OCH FRÅGADE EFTER MIN BILJETT-OCH SADE TILL MIG-FAST NAMNET INTE STOD PÅ BILJETTEN-"THOMAS,FÖLJ MED MIG SÅ SKA DU FÅ EN EGEN KUPÉ,OCH HOPPAS ATT RESTEN AV RESAN BLIR MER ANGENÄM". NÄR JAG PRATAT MED GENERALEN PÅ A9-INNAN HEMRESAN-SA HAN,GENERALEN-"NÄR DU TRÖTTNAT PÅ GROVARBETE,KAN DU ÅTER SÖKA TILL A9-MEN DÅ FULLGÖRA DIN VÄRNPLIKT MEN DÅ SOM MALAJ..."-JAG SVARADE GENERALEN,EFTERSOM JAG TIDIGARE VARIT UTTAGEN TILL STABSTROPPS OFFICER,DVS UNDERRÄTTELSEOFFICER,ALLTSÅ KAPTENSGRAD. JAG HAR INGA PSYKISKA PROBLEM-DÄREMOT EN GENOMFALSK DIAGNOS-"PARANOID PSYCHOS"-SOM GRUNDAR SIG PÅ MITT UTTALANDE OM FLICKANS ÖDE. DEN PERSON SOM MÖRDADE FLICKAN VART VÄLKÄND AV MIG. POLISCHEF WALTHER EVERT KARLSSON,NUMERA KEGÖ. HAN STOD BAKOM FLICKAN OCH KVÄVDE HENNE MED ENA HANDEN ÖVER MUNNEN OCH HÖLL HENNES NÄSA MELLAN TUMMEN OCH PEKFINGRET....ÖGONEN HIMLADE PÅ HENNE....OCH INFÖR VÅRA ÖGON FÖLL HON IHOP FRAMÅT...BLEV LIGGANDE MED HUVUDET MOT OSS I DÖRRÖPPNINGEN TILL RUMMET...WALTHER KEGÖ GICK EMOT OSS SOM STOD I DÖRRÖPPNINGEN,OCH VÄSTE " FLYTTA PÅ ER,DJÄWLA INVALIDER". EFTER JAG KOMMIT TILLBAKA TILL UDDEVALLA FRÅN KRISTINEHAMN,SÖKTE JAG ARBETE PÅ ETT TILLFÄLLIGT KONTOR SOM UPPRÄTTATS PÅ STORA HELLEVIGSGATAN I UDDEVALLA,"FARTYGSISOLERING"-DÄR NU SEDAN MÅNGA ÅR SJÖMANSHUSMUSÉET LIGGER. JAG KOM ATT ARBETA TILLSAMMANS MED FLICKANS PAPPA,SOM SADE :"JAG TROR INTE MIN DOTTERS DÖD VART NÅGON OLYCKSHÄNDELSE,JAG TROR NÅGON GJORDE NÅGOT MOT HENNE. INGEMAR HETTE HAN."BLOMMAN" LADE SIG I SAMTALET OCH SKRATTANDE,INTE KUTYM,SA HAN "FÖR DET VET VÄL DU KALLMYR,SOM ÄR FRÅN "GÖKBOET".-VILKET FICK INGEMAR ATT BRISTA UT I GRÅT-OCH SÄGA TÅRÖGD-"DET KAN VÄL POJKEN INTE HJÄLPA VEM SOM ÄR HANS FAR !!!" JAG AVSLUTADE MIN ANSTÄLLNING PÅ "FARTYGSISOLERING" OCH FICK JOBB VIA KNUT-PÅ TVÄTTEN UDDEVALLA SJUKHUS-JAG VART ALDRIG SJUKSKRIVEN FÖR "PARANOID PSYKOS"-DEN DIAGNOSEN FICK JAG DÄREMOT 1992,FÖRTIDSPENSION PÅ EFTER ATT TOMMY GUNNARSSON,KASTAT EN JÄRNVÄGSBJÄLKE,SÅ DEN KNÄCKTE MIN BRÖSTRYGG UPPE PÅ FRIDHEMSTIPPEN-DOKTOR SYLVIA VIDE-SA DET VART SVÅRT ATT FÅ FÖRTIDSPENSION ENBART PÅ RYGGSKADOR/FÖRSLITNINGSSKADA I BRÖSTRYGGEN. EFTER ARBETE PÅ TVÄTTEN UDDEVALLA SJUKHUS BÖRJADE JAG OCH LARS-OLOF GRUNDBERG PÅ SVETS/PLÅTSLAGARKURSEN NERE I HAMNEN-VI SKULLE VARA GARANTERADE ARBETE OM VI KLARADE KURSEN.SÅ 4 OKTOBER 1976 ARBETADE JAG PÅ UDDEVALLAVARVET AB-SOM PLÅTSLAGARE VID VÄSTRA FLAKET-KÄRRAVERKEN. 1978 I DECEMBER VART JAG SVÅRT LUNGSKADAD AV RÖKEN FRÅN ASFALTEN OCH CEMENTEN-OCH FICK OMSKOLAS TILL MASKININGENJÖR 6 JUNI 1980-TOG JAG EXAMEN VID NILS ERICSONGYMNASIET.TILLSAMMAN MED VITTNET JAN THORSTRÖM SÅG VI FLICKANS MÖRDARE SOM VART DÄR PÅ SKOLAVSLUTNINGEN. JAN THORSTRÖM GJORDE MIG UPPMÄRKSAM PÅ HANS NÄRVARO GENOM ORDEN: "KOMMER DU IHÅG MANNEN MED DEN LUSTIGA NÄSAN?"-SÄGER PLÖTSLIGT JAN THORSTRÖM. "VART STÅR HAN?" FRÅGADE JAG,JAN THORSTRÖM PEKAR LIKA HÖGLJUTT,OCH JAG SER WALTHER KEGÖ,20 METER FRAMFÖR OSS,HAN HÖRDE THORSTRÖMS ORD-OCH KOM IKLÄDD MELLANGRÅ BYXOR OCH MÖRKBRUN KAVAJ-SLIPS-MOT OSS OCH JAG VÄNDE RYGGEN TILL I REN REFLEX-HAN NÅDDE MIG OCH GAV MIG EN KNUFF I RYGGEN-LIKSOM FÖR ATT SÄGA"HÅLL KÄFTEN-OM LIFVET ÄR DIG KÄRT" JAG TOG EXAMEN DEN DAGEN MED HJÄRTAT I HALSGROPEN. JAG SLUTADE EFTER OMPLACERING PÅ UDDEVALLAVARVET AB-PÅ GAMLA FÖRRÅDET-CENTRALFÖRRÅDET PÅ UDDEVALLAVARVET,DEN 25 NOVEMBER 1983. DÅ HADE JAG REDAN INLETT ETT FÖRHÅLLANDE MED SRIYANIE JAYAMANNE FÖDD 1959-10-17.DET VART PERSONALCHEFEN SOM UPPMANADE MIG ATT FRIVILLIGT SÄGA UPP MIG,EFTERSOM JAG GICK OCH TOG LEDIGT FÖR ATT ARBETA MED LÄRARVIKARIAT-ANNARS SKULLE JAG RISKERA SPARKEN-VILKET SKULLE SE ILLA UT I MITT C.V. 1985 I FEBRUARI-ORDNADE DOKTOR GÖRAN PALMERS ATT JAG VIA EN PRYO ANSTÄLLNING HOS SVEN BYLANDER I TROLLHÄTTAN-ATT JAG NEDDROGAD BLEV UTSATT FÖR ECT-BEHANDLING UTAN LÄKARES UNDERSKRIFT-SKÖTERSKAN AVBRÖT BEHANDLINGEN NÄR DOKTOR GÖRAN PALMERS SKREK " ÖKA" SPÄNNINGEN-HON TILLKALLADE ÖVERLÄKARE,OCH DÅ FRAMKOM ATT DE GJORT KARDINALFEL MOT MIG. JAG VART INNE PÅ AVDELNING 24 I EN VECKA UNDER TUNG MEDICINERING PÅ GRUND AV FLERA SÄPO MÄN SOM HÄRJADE MED MIG PÅ AVDELNINGEN-DE VILLE JAG SKULLE SKRIVA ATT WALTHER KEGÖ-INTE MÖRDAT FLICKAN-SAMT ATT HAN INTE HÖLL PÅ MED NÅGON KONSPIRATION MOT OLOF PALME...BETÄNK ATT DETTA VART EXAKT ETT ÅR INNAN PALME-MORDET. LÄKAREN&PSYKIATRIKERN HÅKAN JOHANSSON SADE TILL MIG ENSKILT ATT = "JAG ÄR PERSONLIGEN EMOT ATT MAN ANVÄNDER SJUKVÅRDENS RESURSER TILL POLISIÄRA INSATSER"-OCH SÅ SKREV HAN ETT SJUKINTYG "TRE MÅNADER SJUKSKRIVNING PÅ GRUND AV ASTHMA"-VÄNDE PAPPERET MOT MIG OCH SADE DET VART SVÅRT ATT FÅ SKADESTÅND FÖR POLISÖVERGREPPET PÅ AVDELNING 24-OCH HAN SADE " BLIR DET BRA SÅ HÄR".? ETT GULT PAPPER MED GRÖNA LINJER-SOM JAG ALDRIG LÄMNADE IN PÅ FÖRSÄKRINGSKASSAN,UTAN PLACERADE BAKOM ETT FOTOGRAFI I HEMMET. JAG OCH FAMILJEN SRIYANIE OCH RICHARD CHAMINDE GUSTAFSSON-FLYTTADE MED EN TRE MÅNADER GAMMAL GEMENSAM DOTTER TILL MALMÖ-FÖRST SKRIVNA PÅ KAPRIFOLIEVÄGEN 14,POSTBOX NÖBBELÖV 1040. SEDAN RAMELSVÄGEN 123 FJÄRDE VÅNINGEN ROSENGÅRD,MALMÖ. NOTERA ATT JAG INTE VART SJUKSKRIVEN FÖR PSYKISK OHÄLSA-UTAN SÖKT ARBETE OCH ARBETAT HELA TIDEN DE TRE ÅR JAG BODDE I MALMÖ. FÖRST NÄR DEN JÄVIGE DOMAREN,SOM HAR ONATURLIGT MÅNGA FÄLLANDE DOMAR BAKOM SIG,YTTRAT SIG PÅ LAGENS STRÄNGASTE STRAFF 2 ÅR-SEDAN KOM JAG 2010 EFTER DEN 25 AUGUSTI ATT HAMNA PÅ KUNGÄLVS RÄTTSPSYKIATRISKA OCH BLI BEDÖMD ATT HAMNA PÅ RESTAD GÅRD OCH SENARE DET FÄRDIGSTÄLLDA BRINKÅSEN DÄR MATS BLOM ARBETADE SOM ANLÄGGNINGSARBETARE. FÖRE UTSLÄPP FRÅN BRINKÅSEN 2012,GAV DOKTOR ÖVERLÄKARE REINER OLLWEIN MIG ORDINATION GULA PILLER 25 MG SERDOLECT,SAMT PARGITAN ( KEMISK) "KASTRERING" OCH PÅSTOD DEN MEDICINERINGEN VART BRA FÖR MIG-ABSOLUT PERSONLIGHETSFÖRÄNDRANDE MED SVÅRA BIVERKNINGAR VART DEN.... PÅ HEDER OCH SAMVETE,ANMÄLER JAG REINER OLLWEIN OCH BOZENA ARENDARSKA-FÖR FELAKTIG DIAGNOSER SCHIZOFRENI OCH PARANOID PSYCHOS. SAMT FELAKTIG MEDICINERING SOM FÅTT BESTÅENDE MEN. SERDOLECT ÄR FÖRBJUDEN I AUSTRALIEN OCH USA. TILLVERKAS AV LUNDBECK I KÖPENHAMN,DANMARK. Visa citerad text

  • @stevemuenich8406
    @stevemuenich8406 Месяц назад

    Thanks for sharing....Worked exactly as described

  • @notsrynot
    @notsrynot Месяц назад

    Perfect Video! Thanks

  • @ScatManAust
    @ScatManAust Месяц назад

    Actually, solder is how you say solder. With an L. Not sarder or sodder. Also, you should have poked the loose end in the center instead of bending the wire on itself. Also, with all that "plenty wire " as you say. I would have unwrapped one of the turns at the start to give you more wire to play with both ends Just sayin

    • @n3vanradio
      @n3vanradio Месяц назад

      You must be british to have the L not silent. Interesting. Thanks for watch! 73

    • @ScatManAust
      @ScatManAust Месяц назад

      @@n3vanradio There's nothing silent about it

  • @muskrat1949
    @muskrat1949 Месяц назад

    How do I reset to default?

  • @RGreyVanIngen
    @RGreyVanIngen Месяц назад

    You at no time said it was windows only. Great help.

    • @n3vanradio
      @n3vanradio Месяц назад

      Sorry about that. I plan to do one in Linux in the near future. 73

  • @tinkeringwithelectronics
    @tinkeringwithelectronics 2 месяца назад

    I couldn't get DFUsedemo to see my H4, so tried STM32CubeProgrammer which would, then the NanoVNA would do anything! Nothing I did would unbrick my H4....then watching your video yet once again, I decided to delete the STMbootloader that appeared under the "extra" Universal Serial Bus controllers in device manager (hey I bricked the Nano, why not brick my desktop computer, LOL). When I went back to the DFUsedemo, it now saw the H4 in DFU mode and in the device manager I again got an additional Universal Serial Bus controller that now had a device in DFU mode! Then I was able to update to dislords 1.2.29 firmware via you instructions and it began working again! Thanks soooo much for the time you took to put this together. W4FLI

    • @n3vanradio
      @n3vanradio Месяц назад

      Glad you were able to get it working. Yes sometimes these programs dont talk well with the devices lol. 73

  • @waterfaucet9926
    @waterfaucet9926 2 месяца назад

    How about a length of 130-133 ft antenna wire? Will that tune well with 75/80m along with some of the other HF bands (40/20/15/10)?

    • @n3vanradio
      @n3vanradio Месяц назад

      You would have to use a tuner for 75 meter on a 130-133ft wire. Will make a video on the longer 80-10m wire.

  • @CanyoneerDuke
    @CanyoneerDuke 2 месяца назад

    glad you are back to making vids. BTW, I have an idea for a vid. Does is pay to calibrate NanoVNA with the coax in place so that the coax losses are not part of the SWR reading when analyzing an antenna or is the difference small enough that it is not worth the effort. Just a thought ;)

    • @n3vanradio
      @n3vanradio 2 месяца назад

      Thanks Duke! I am glad as well. Working on a few vids on the FX-4CR right now. The difference is pretty small unless you are running a loooonnngggg test cable. Heading to NH for NEAR-Fest shortly! When I get back have a few vids to post!

  • @chriswilliamson607
    @chriswilliamson607 2 месяца назад

    Weird, takes 40 minutes to an hour to flash - I did the first two with the normal USB cable then my friend said his took one minute with the USB-C cable so now I am trying with the USB-C and it is still taking at least 40 minutes. Any ideas why? I have a very fast laptop.

  • @TheBiggE.
    @TheBiggE. 2 месяца назад

    Yeah for emergency truly reliable comms I’m going with the Yaesu. Thanks for this

  • @LiveFree-ij3hn
    @LiveFree-ij3hn 2 месяца назад

    Did you do the 4 cycle battery conditioner after your firmware update?

    • @n3vanradio
      @n3vanradio 2 месяца назад

      Yes I did just to be on the safe side.

  • @stanrock01
    @stanrock01 2 месяца назад

    Man, you saved my sanity! Thanks for that trick.

    • @n3vanradio
      @n3vanradio 2 месяца назад

      Glad I could help! Enjoy your NanoVNA, it is a great device!

  • @kenherren7547
    @kenherren7547 2 месяца назад

    I was at US-0549 for the eclipse it was a 90% in the totality with full cloud cover. It was nice to experience it. WQ9V 73

    • @n3vanradio
      @n3vanradio 2 месяца назад

      Always good to get out to do radio and glad you also enjoyed the added bonus of an eclipse. We also had full cloud cover. But still a good time! 73 N3VAN

  • @lt.petemaverickmitchell7113
    @lt.petemaverickmitchell7113 2 месяца назад

    THANK YOU! I have a 6R and am ordering one of these after work today.

  • @katevanderhoff8336
    @katevanderhoff8336 2 месяца назад

    Hi guy its me katie 73😊

  • @MikeN2MAK
    @MikeN2MAK 2 месяца назад

    It was cloudy here to, but that's awesome you got to do a POTA during it and share the experience with your daughter.

  • @N1JUR
    @N1JUR 2 месяца назад

    man wish I had roadies for my pota setups.. You must be making the big bucks :) Nice activation.. I didn't know you were on the FX4CR. Your signal was awesome.

    • @n3vanradio
      @n3vanradio 2 месяца назад

      Always nice to have help! I am really enjoying the FX-4CR. I am having an issue with it on 20M band BUT I plan to make a video on how to fix it. Glad to get you again at this park!

    • @katevanderhoff8336
      @katevanderhoff8336 2 месяца назад

      Hiiiiii it's me katie from video 73

  • @astrawally8448
    @astrawally8448 2 месяца назад

    Well done Matt, a proper and succinct set of instructions without the BS. Keep it up my man.

  • @kb1qzh
    @kb1qzh 2 месяца назад

    1. This is exactly what I was looking for. 2. Were you at the Sussex flea in 2023? I think my boss bought one of your antennas which I finally returned to him 😅

    • @n3vanradio
      @n3vanradio 2 месяца назад

      Thanks KB1QZH and yes I was at Sussex 2023 Hamfest and will be there this year as well. 73 Matt N3VAN

    • @kb1qzh
      @kb1qzh 2 месяца назад

      @@n3vanradio we should be there. The Hamsource booth

    • @kb1qzh
      @kb1qzh 2 месяца назад

      @@n3vanradio my POTA activations were with your endfed and an Opek HVT-600 mobile hf antenna

  • @robertdale5566
    @robertdale5566 2 месяца назад

    FYI, it’s pronounced “she-yay-goo”

  • @mikesey1
    @mikesey1 2 месяца назад

    what is "sodder?" Do you mean solder? Did you notice that the airband is interesting on the 6X? You can transmit on am or fm, but not sure whether the mod makes that happen. **it is highly illegal to transmit on the airband** !!

    • @n3vanradio
      @n3vanradio 2 месяца назад

      I have yet to check the airband, but will now that I know I can hear it! Thanks

  • @mikesey1
    @mikesey1 2 месяца назад

    Most radios allow up to 16 volts without damage. These connectors charge some Icom radios too. My IC-T8E & V85 charge nicely with it.

  • @asherael
    @asherael 2 месяца назад

    I don't have a computer to tune my antenna, at best, a tinySA. can i measure or something else instead?

  • @ai5dd
    @ai5dd 2 месяца назад

    Thanks, I MARS modded mine and was looking or a good 6 meter antenna. Subscribed. 73 de AI5DD

  • @jamespence48
    @jamespence48 2 месяца назад

    A link to Carl M0SZT lengthening video would be nice.

    • @n3vanradio
      @n3vanradio 2 месяца назад

      Will add that, thanks!

  • @prephampaul
    @prephampaul 2 месяца назад

    Got my mini today, will be testing various wire lengths and hanging out a hotel window in Japan this week!

    • @n3vanradio
      @n3vanradio 2 месяца назад

      Awesome, hope you enjoy it! 73 Matt N3VAN

  • @BWALK551
    @BWALK551 2 месяца назад

    good stuff ! Ordered today.

  • @jeremyboxdotcom
    @jeremyboxdotcom 3 месяца назад

    Of course I found this video as I was reassembling mine after resoldering the DC plug. Anyone watching planning to disassemble one, don't worry about the ball bearings, you don't need to take the legs off at all to take it apart, they come off along with the side panels, so it's quicker and easier to leave them alone entirely and not even risk it.

  • @kc6nfv746
    @kc6nfv746 3 месяца назад

    Cool video

  • @kc6nfv746
    @kc6nfv746 3 месяца назад

    How many wraps

  • @raysamuels1
    @raysamuels1 3 месяца назад

    Can you use chirp or rat systems to do the same?

    • @raysamuels1
      @raysamuels1 3 месяца назад

      Oops! RT system not rat

    • @n3vanradio
      @n3vanradio 2 месяца назад

      I dont believe software modding gives the range that the hardware mod does.

  • @johnnorth9355
    @johnnorth9355 3 месяца назад

    Excellent - I was wondering how to set mine up and now I know. Many thanks.