![RIDE the SKY](/img/default-banner.jpg)
- Видео 66
- Просмотров 66 911
RIDE the SKY
США
Добавлен 24 апр 2014
Cinematic aerial videography using traditional drones and FPV.
The iFlight Nazgul Evoque V1 CAN Run the DJI o3 Air Unit! Easy Conversion!
I converted the iFlight Nazgul Evoque V1 to work flawlessly with the DJI o3 Air Unit, but ONLY with camera uptilt angles from 0 to about 15 degrees. If you want more uptilt and don't plan on mounting an additional action camera, you can use something like this: www.etsy.com/listing/1376212702/stock-gopro-adjustable-tab-mount-for-dji?gpla=1&gao=1&
If you mount the camera like I did in this video, the standoffs will be in view of the camera when set to "wide" with any uptilt greater than about 15 degrees.
Detailed Instructions below. All it took was a few VERY basic razor blade modifications, and a bit of soldering.
Read all the instructions before giving it a try, and remember... I'm not res...
If you mount the camera like I did in this video, the standoffs will be in view of the camera when set to "wide" with any uptilt greater than about 15 degrees.
Detailed Instructions below. All it took was a few VERY basic razor blade modifications, and a bit of soldering.
Read all the instructions before giving it a try, and remember... I'm not res...
Просмотров: 5 289
Видео
I Nearly BEANED my Wife with my FPV Drone! 😬 First Pack in months...
Просмотров 1302 года назад
My first pack in months nearly end in disaster as a powerloop gets pretty close to my sweet wife who stepped away from the wall to check out the FPV drone in flight. I was pretty frustrated with the "flicky" powerloops after not flying for so long. Gotta get those down again so I kinda did a ton of them on this flight. A big thanks to Lee @adventurefpv for the kind text to get me out on a fligh...
Rotor Riot's MOXY Pro Spec by Bubby FPV: First Flight Impressions
Просмотров 4,2 тыс.2 года назад
A Vlog of my first FPV flight with Rotor Riot's newest prebuilt quadcopter: the MOXY Pro Spec by Bubby FPV! I personally think this drone looks amazing, and I love Bubby's flying style. I'm posting this with no stabilization turned on so you can see any jitters or prop wash from the build. Spoiler: there's hardly any! A big thanks to Caleb, Stacy, Drew, and Tyler for helping me get this drone s...
My BEST #FPV Freestyle Flow Sesh EVER! #fpvfreestyle
Просмотров 3132 года назад
I am a MASSIVE fan of Rotor Riot, Le Drib, and Bubby! Their flowy, smooth, viewer-friendly lines are what really drew me to FPV freesytle. So I was pumped to buy Bubby's new Moxy prebuilt, but there was a problem... all I have are 6s batteries and the Moxy was only available for 4s. Well, Bubby, Stacy, and Drew totally went the extra mile to help get a 6s Moxy built for me (which will arrive so...
FPV "FLOW-erloops" at Top Golf Construction Brando #FPVfreestyle
Просмотров 3332 года назад
Hey guys! Thanks for watching! I got just two packs in before I mashed up my props but managed to get some nice freestyle flow going at the Top Golf brando. I was using the iFlight Nazgul Evoque for this flow, and still can't believe the durability. I treat it like a straight up basher and other than submerging the thing in water (which I did), I can't break it. Knock on wood. Props to the GoPr...
Nazgul Evoque FPV chasing BMX & MTB at Snake Hollow Bike Park 1-3-2022 - St George Utah
Просмотров 5422 года назад
Nazgul Evoque FPV chasing BMX & MTB at Snake Hollow Bike Park 1-3-2022 - St George Utah
2021 Cinematic FPV Dirt Bike Highlight Reel
Просмотров 2042 года назад
2021 Cinematic FPV Dirt Bike Highlight Reel
Ripping with Jeff! Happy late 50th birthday, man!
Просмотров 5442 года назад
Ripping with Jeff! Happy late 50th birthday, man!
9 Months of FPV: iFlight NAZGUL F5 EVOQUE Scrapyard Freestyle 0* Camera Angle
Просмотров 4,4 тыс.2 года назад
9 Months of FPV: iFlight NAZGUL F5 EVOQUE Scrapyard Freestyle 0* Camera Angle
Nazgul Evoque Water Crash: Any advice on fixing a fully submerged drone?
Просмотров 6102 года назад
Nazgul Evoque Water Crash: Any advice on fixing a fully submerged drone?
FPV Cine-Freestyle at Ancient Arizona Petroglyphs
Просмотров 2532 года назад
FPV Cine-Freestyle at Ancient Arizona Petroglyphs
KTM 300 XC Dirt Bike SHREDS With FPV Drone! Warner Valley, Utah
Просмотров 3072 года назад
KTM 300 XC Dirt Bike SHREDS With FPV Drone! Warner Valley, Utah
FPV Flow Sesh through a SKETCHY Barn Bando... Barndo?
Просмотров 6872 года назад
FPV Flow Sesh through a SKETCHY Barn Bando... Barndo?
#fpv BIG dive near Zion National Park #utah
Просмотров 2162 года назад
#fpv BIG dive near Zion National Park #utah
High risk flying in low risk environment
Просмотров 4852 года назад
High risk flying in low risk environment
iFlight Nazgul Evoque Freestyle FPV Flight through the "Bridge to Zion" Utah
Просмотров 7122 года назад
iFlight Nazgul Evoque Freestyle FPV Flight through the "Bridge to Zion" Utah
iFlight Nazgul Evoque FPV Freestyle vs HIDDEN WIRES! Back to the BRANDO!
Просмотров 1552 года назад
iFlight Nazgul Evoque FPV Freestyle vs HIDDEN WIRES! Back to the BRANDO!
FPV Freestyle: MY FIRST MATTY FLIP EVER | TOPGOLF Construction Site!
Просмотров 2,3 тыс.2 года назад
FPV Freestyle: MY FIRST MATTY FLIP EVER | TOPGOLF Construction Site!
8 Months of FPV and Still Seeking that Elusive Flow
Просмотров 1,7 тыс.2 года назад
8 Months of FPV and Still Seeking that Elusive Flow
I LOVE my FPV job! (FPV SASHIMI: Unedited Freestyle and dirtbike chases!)
Просмотров 3862 года назад
I LOVE my FPV job! (FPV SASHIMI: Unedited Freestyle and dirtbike chases!)
Chasing Dirtbikes with an FPV drone: 11-2-21 eveRide Solid Rally
Просмотров 1602 года назад
Chasing Dirtbikes with an FPV drone: 11-2-21 eveRide Solid Rally
FPV Range Test DISASTER: iFlight Albatross vs Xilo AXII - A difference of a full kilometer!
Просмотров 2,5 тыс.2 года назад
FPV Range Test DISASTER: iFlight Albatross vs Xilo AXII - A difference of a full kilometer!
AWESOME Halloween FLOATING HEAD! FPV Drone
Просмотров 1742 года назад
AWESOME Halloween FLOATING HEAD! FPV Drone
An FPV Pilot's DREAM: SLOT CANYONS IN UTAH 4K | iFlight Nazgul Evoque
Просмотров 1,7 тыс.2 года назад
An FPV Pilot's DREAM: SLOT CANYONS IN UTAH 4K | iFlight Nazgul Evoque
Why I'd Start FPV on the DJI FPV, but Switch to the iFlight Nazgul Evoque (or other FPV drone) Later
Просмотров 1,2 тыс.2 года назад
Why I'd Start FPV on the DJI FPV, but Switch to the iFlight Nazgul Evoque (or other FPV drone) Later
iFlight Nazgul Evoque F5 SASHIMI! Totally Raw, Uncut, Unstabilized 4k, Prop Noise, 4 straight packs!
Просмотров 8712 года назад
iFlight Nazgul Evoque F5 SASHIMI! Totally Raw, Uncut, Unstabilized 4k, Prop Noise, 4 straight packs!
What 4K is Best for chase FPV? Testing 4k 16:9 60fps Hypersmooth vs 4k 4:3 30fps ReelSteady Go
Просмотров 8462 года назад
What 4K is Best for chase FPV? Testing 4k 16:9 60fps Hypersmooth vs 4k 4:3 30fps ReelSteady Go
FPV vs. DIRT BIKES | Nazgul Evoque F5 in Southwest Utah
Просмотров 2482 года назад
FPV vs. DIRT BIKES | Nazgul Evoque F5 in Southwest Utah
Hello! Nice work!!! Maybe you have presets for Betaflight 4.4 or 4.5?
When people fly this fast it doesn’t make much of a difference but when you’re flying slow and wanna add music and sound effects stuff like that reelsteady is great
Just got into FPV a couple of months ago and am now thinking of getting this one as my third drone in 3 months 😝
Thanks man. I just built this. Looks like you can change it up to different configurations if you want.
Tyler, i never knew you were a FPV pilot. I already follow you on your other channel! Huge fan! Im wanting to get into Fpv, living in NC, there arent any open areas to fly in.
So when you crash you disarm to not burn motors out
Ahhh YEAH! Loved that, mate! Greetings and love from the UK!
Nice comparison, I have few questions: 1.What motors KV you had on this one 2. Did you record video from Gopro? 3. What rates on it. I'm building evoque now and just gathering info about this frame quad etc.
Looks smoooooth! Curious of what rates you use for Cinematic? I am delving into FPV myself & trying different tunes etc. Keep up the good work! 🤘🏽🤜🏼🤛🏽 Thanks
Wonder had you any issue on the set up of gps module have you got sats straightsway? I cannont get any sats
You do the conversion and disappeared?! Hope you’re well!
i crashed mine and ripped the receiver cable in half xd
I have a Moxy 5" Pro-Spec Built & Tuned Drone - 4S version coming in the mail soon and I'm so excited! I'm coming from the DJI FPV drone so I'm super excited to see how it performs!
I'm about to order one, comming from the fpv too 😂
How far away down that canyon can go without losing signal?
I think the 6s would be better because he can power out of mistakes
Amazing! Thank you for sharing this content.
i dont have a OSD. Do you have a solution?
Hi, thanks for making this video! I have been wondering would it be easier to just buy the v2 frame and port over all the electronics from v1? I assume they are all the same except the O3 unit. Thanks.
Thanks man! Want to get one of these but not break the bank on a ton of batteries, already have a bunch of 4s for now👍
Hi ... Thank for this video you helped me to install it... I need one more thing...the wires connection
What size drone are you flying through these? 5"?
Nice video bro. I had no idea u could use a 4s on a 6s quad . I thought it would damage the electrical components. I have the evoque f5d and made a mistake buying 4s batteries instead of 6s... Good to know i dont have the throw them away
Amazing drone and you Sir have a amazing family! You are living the American dream and you need to keep your channel going cause even your family life mixed with drones would be great. Thanks for sharing always!
Not me randomly looking at drones and running into everrides drone channel. Hell yah subbed man!
How does this process work with the frame kit for the upgrade of v1 to v2?
im personally a fan of "raw footage" color grading is fine and all but the imperfections of raw to me tells a better storie, and more emotions. the raw footage here to me shows your ardrenline, your oh craps and your talent. where real steady just crops and takes the minor distorions out. it to me kills your flow in my honest opion. great flying though!
This is great, have you tried the 3d prints for the o3 camera on the evoque? They stick out at the front
Hi, do you have a link to the 3d prints you are talking about? All I could find are for the normal nazgul without sidepanels.
Hi, can u show how this things are visible in the goggles
can you put a link to the antenna from iflight?
WTF, you have an FPV channel now too? Awesome! Iv watched a tone of your moto stuff over the years but just fount this chan that you have apparently been doing for a year already. Too bad this hobby is also being regulated out of existence. Anyway cool to discover this.
At 3:51 a little rock 🪨 that's big enough to hit you in the air, but lucky somehow it just missed you!! Great footage and great way to save money, just buy 03 system and put in a little of modified to do and your good to go fly, that's awesome!! I do have 03 system on my own bills custom drone, been fly it for 4 or 5 months. But not right now, cuz it got broken FC after my bad crash, I will have to put my 03 system drone on a hold until I can afford to buy just a new FC then I'm good to go again. Currently I fly with my Vista drone that I also build of my own drone, these HD systems are soooo good to fly with, way better than analog, obviously! 😊
Thank you for sharing! Already upgraded my Protek from Vista to O3. Work's well, too. Nazgul V1 is next. Perhaps I have to create a custom mount for the camera, because I'm not flying 0 degrees... Good to know, that the AirUnit fits without screw-mounting 👍
I did the upgrade, thanks to your video, thank you so much 😁
Wonderful! Let me know how things go!
I've got a Nazgul. Was having a really off day once and mixed up my angle and arm switches. Had been taking off in angle and disabling it once I got clear, but on this particular day I disarmed at about 80 feet and smacked right into a pile of freshly cut wood. Now this wouldn't be so bad if I didn't go and do it a SECOND time. It's still in perfectly good condition however. Tough little beast.
I admire your courage.
I'd save some even more weight and work and not even put back the plastic housing and print a mount solution for the camera. Just my opinion. What do you think? Who cares about the LEDs!
With what type of tool did you trim the black cover ?
I used a scalpel tool. Any razor blade should do, just be cautious : )
Lol.... Wifey wearing UGG boots on the hike... My girlfriend does the SAME THING every time we hike! Usually I get the "I didn't know we were going to hike off the gravel path" ... As if we've ever stayed on the gravel path.
Hahaha if I'm flying, it's pretty well a guarantee that there will be a crash and a hike! Next time you're out here we'll have to take a day off riding and go fly some red rocks!
@@ridethesky3259 Yes! For sure!
Gained a new sub Is this how clear the camera looks ?really looking forward to getting one
Love those red rock mountains! Wish we had some of those in my part of the country.. Footage looks great!
Done a great job 👍 n very nice n clear explanation of the mods .
Did you to change the PID tune ?
Thank you so much for this video!
How do you not have any vibrations and not even soft mounted. That O3 cam is so sensitive. That quad is is freaking super tuned. Are you using Gyroflow? Pretty crazy and pretty cool.
Some shots are with gyroflow, some with rocksteady, and a few of the moto clips have no stabilization turned on. I've been shocked that it has done so well. Maybe the plastic mount has just enough give to avoid the resonance? I really have no idea, but it works!
Thank you for this video! I just order goggles 2 with o3 air unit..(I'm switching from analog).. I thought that the o3 air unit plug connects directly to the flight controller via plug n play plug like the vista.
I thought it did as well because the plug lines up perfectly, but the pin layout is different. I was terrified that it needed to be soldered because I've never soldered something so small, but luckily it ended up working out. Good luck!
@@ridethesky3259 Thank you for the info! my o3 arrives tomorrow and I will be extra careful about wiring!
@@ridethesky3259 I installed the o3 air unit today. The plug that came with the air unit had the wiring completely inverted.. I ended up removing all the wires from the plug and re plug them with the correct wiring to the flight controller plug..
Be very careful of the pin layout. Triple check your wiring b4 powering up!!!
This is good to know, as a v1 evoque owner, I wasn't sure if this was possible. Thanks for this video, made up my mind for me haha! Good stuff bud! 👏🏼
Looks really good Tyler. Nice work.
good evening-Ride! Like it,that is well video, 📽