Видео

does the color match perfectly?

Thats a whole lotta rice!

This video saves a lot of frustration and time. I bought a e-torx wrench for the new bolts based on the tips in the video. It made the job so easy.. Thank you!

I just bought this. I can’t smell anything unless I put my nose right next to it.

How are they holding up? You didn't lose them yet? 😊

How does this hack work when under load? if there is a car sitting on them do they still move? Any danger of the rollers being crushed by the weight of the car/truck on top?

Just finished the first one (LR) and it was easy as your video showed. That damned wheel and tire are heavy, especially for a 75 year old. Thanks for a great video.

anybody know if 5/8 or 3/4 inch ball bearings wheels would work ? I am worried about the height of QJ fitting under car . Thanks

Hello there Peter. 1st time that I bumped into your channel. Thank you for the hack on the QuickJack. Quite useful and simple to do. I'm starting to do my homework on them, since I'm looking to get one, (like the 5000 series, being that i also have an older car from the 70s). I like that they don't take a lot of space, since my garage space is limited and though they lift the car up too-too much, it's better than me crawling on the floor with floor jacks, stands etc. I'm not a kid anymore.... (Actually in my middle 60s 😁). One question that i have for you is, i was thinking of using it in my driveway sometimes where I'll have more room width wise...Could i use a decent duty extension cord to make the cord longer, also what amperage-wise, receptacle would i need to safely run this. Thank you for your time and stay well...

Rule #1: Make sure the locks engage on each side! They don't necessarily lock simultaneously. Cause? Possibly not adequately bled before use.

Hello, the side view mirror on passengers side broke on my tesla model3. I did purchase the replacement mirror, but don’t understand how to fix the wired parts that are soldered and how to remove the white part, could you please help 🙏@theautomotivefanatic

STP, baby!

wider tires more contact patch more road friction...less miles per charge

Thanks just got mine!!!!

I gave it 10 seconds n then cut my throat. 🤡

Sorry but you dont have to be a rocket scientist to make sure the lift is up enough to manually check the safety locks before letting it down. This looks like one of those commercials where incompetents rules.

It is safe use this battery air pump for my paddle board (max 12-15psi) cause i have total 4 paddleboard me my wife n w kids..atm i only have 1 paddleboard electric pump and it took at least 10-12mins to get full of air on each paddleboard..that's why i have a plan to buy another 1 like this with battery..thank you :)

Very clever Peter! Mine will be delivered late August. Thank you!

I can tell when I first saw your video one side locked and you started to lower to lock in place, the driver side wasn't completely locked so driver side continue to go down.

Operator error

excellent video, i will try and do mine this weekend thanks so much for taking the time to film.

Does the sound go in thru the aux port and if so, how is it? Is it low / poor quality, or similar to bluetooth? i.e. do you have to turn the volume in the car way up to hear decent audio?

why all the movie videos you showed looks like in slow motion? what is the refresh rate of the monitor? it looks like the processor barely can keep up with the unit itself and it is slow processing power make video and loading apps information very slow. I noticed like populating video previews on RUclips app was so slow that it almost useless

You dont have to use that awkward fill plug , we just pump the new fluid with a hand pump through the drain/level check hole. its a lot easier .

I think Peter meant to say using a Laser Thermometer to check the fluid temperature. Not a heat gun.

"I'm lucky to be alive!" LMAO

How much higher do those rollers make the QJ sit? I have a lowered C5 Corvette, my QJ's get here tomorrow just in time to replace the trans cable. I'd really like to do this if it doesn't interfere with getting under my car.

Man, I wish they made this for my BMW wheels!

what would you say if it all 4 tires are 20 in? do you think that would improve ride quality and make it smoother? im looking at getting a 2022 Model Y Perf, and some people said that i should get 20 in for all 4 tires bc that will improve ride, noise, and bumpiness. Have you heard that tire set up before? Thank you for your help with this..

Thx! did it today. i´ve changed the airbagcap, paddle shiters to lambo urus, and Black borders around the steering wheel buttons. Your Video helped a lot :-)

I've used my bros many times at his place (we help each other often) and consider them quite handy for home gamers with smaller vehicles. Their portability is very nice if you need that, for example if you currently rent your home. I don't own one because I've a Bend Pak-style pantograph lift (much harder to move but not hard to weld on scaffolding caster tube which I'll do before moving it again) but the only reason I have that is it was in new condition for 500 bucks from a shop that never used it and wanted the space for a two-post lift. If you rent either is very nice. If you own, get a two or four post lift possible because they do so much more.

Euro code is crap. Did yours break yet? The front one broke after only 3 years.

HELLO YOU CAN HELPME WHIT CONECTIONS OF THE HANDLE LED AUDI A3 REGARDS FROM MEXICO REALY NICE VIDEOS

So what about with the car on them, can you role the car around or do you have to take them off every time

Omg.. i thought that screws on the front are holding everything.. This montage is so ....shitty...

I painted my calipers when I first got my model Y. Then repainted them a year later. But I’m going to buy the caliper cover and see how I like them. Good video

It also looks like he didn't bleed the system properly, hence one side coming up faster than the other. Should have kept going up until he hears the second click. Also, I have learned this system doesn't like holding the weight for too long while not locked. What I mean is, when you are bringing the car down, you should never pause in between locks for too long.

You should use Race Ramps blocks once the car is up.

Thanks Peter! I use the quick jack daily for mobile service and have been thinking about how I could make them easier to slide. Putting the ball casters on the risers is genius! Thank you

OMG get to the point

Ahhh, procedure error!!!

Is there any fast charger or adapter for tires pumps that can be safely connected to the home outlets ? I’m not comfortable running the car to charge the pump through the cigarette lighter. if so, which ones do you recommend, I’m in the blind here. Thank you.

Hey Peter

Anyway to disable the beep ? On TSL 6 ? Disable somehow ?

Great video 🙏👍

Does anyone know what size torx bit is needed for the bolt on the pan above the frame?

only Tesla can randomly remove features and not tell anyone about it.

I know the back 295 has no foam, does anyone go no foam on front? I need to replace all 4 and can’t decide on the foam for the front

I just installed these and your instructions here were helpful. Yes, I noticed that the fit between the two rears was a little different. I checked the fit and the clearance (using a flashlight) to ensure nothing was coming near the rotor and that the two parts that hug the caliper fit snugly. I also wiggled the caliper covers to ensure everything was nice and tight and tightened all the bolts a little at a time to keep things even. The stickers did NOT come installed. I was very annoyed by this because just peeling the stickers was not easy and the lettering kept sticking to the wrong side so I had to fiddle with it. But I did that part in an air conditioned and comfortable place before doing the installation. It took a good 1/2 hour and I really with they'd just put the stickers on for us (but I'm sure there are worse things that can go wrong 🙂so I'm over it). Also, I'm wondering how those stickers will hold up esp. when doing a wash (probably want to avoid a power washer). I still like the look and I'm happy you made the video so thanks!

I installed the unit but the software malfunctioned and did a factory reset. Now none of the applications are there (no Netflix, no CarPlay, etc.) Do you know if there is a way to re-install the software? I haven't been able to get help from anyone.