Видео

May or may not throw up a Check Engine light. I wouldn't bother trying glue because this last time it deteriorated through the connector. Thanks for tuning in! I'll have another vid coming in the next few weeks I'm hoping. Instagram @bradopotato

Applies to all E65/E66 models mercedesbmwrepair

This video was made on a E60 5-series but can be applied to all models with these engines, with only variations in the beginning. 2004 and previous model years had an M54 Engine installed. N52 Valve Cover Gasket Part #11127581215 Facebook.com/mercedesBMWrepair

Also applies for E91, E92 and E93 as well. N52, N52K and N53 engines

Watch the other video I made for the later model: ruclips.net/video/ahRjoWYcxFY/видео.html

Also a great video for reaching the starter (requires new starter bolts). WHEN REINSTALLING the manifold, guide the crankcase vent hose *underneath* the fuel line, and when everything's back together delete the fault memory. *N52 ENGINES WITH 3.0 liters have a different design for the Crankcase Vent System - you'll need to spend more time unplugging a couple more wires, unclipping the alternato...

This Job only applies to E53s built after 10/03. For X5s made BEFORE I put up another video ruclips.net/video/4gpMBkptOVs/видео.html

mercedesbmwrepair

The difference between removing the Oil Filter Housing on the N54 engine vs. the N52(K) engine is you have to remove the Intake Manifold to get to the last bolt. It's really easy to do and here's a quick video on how it's done. Part #s Oil Filter Housing Gasket 11427537293 Oil Cooler Gasket 11427525335 Vacuum Line N203531

How to remove the intake manifold on a M54/M56 engine and replace the coolant pipes underneath. Here's the P/N for the uppermost crankcase vent hose 11617504536 Check me out at bradensMercedesBMW or find me on Yelp. Thanks to Tim Brown and Jim Corey for teaching me everything I know!

If you're seeing coolant leak out of the wheephole, this is the fix. The earlier version of this engine (N62) would be a very similar procedure but may require some different tools. Only 2 intake manifold gaskets are required. Check me out at BradensMercedesBMW or find me on Yelp!

Hey folks! Here's my first video debut into the BMW community, check me out at bradensMercedesBMW or find me on Yelp!