![Florida Deere](/img/default-banner.jpg)
- Видео 181
- Просмотров 1 237 288
Florida Deere
США
Добавлен 9 мар 2012
This channel is for anyone who love their John Deere Garden Tractors, Sub-compact utility tractors and really any small tractor, JD or otherwise, I just happen to own mostly John Deere. Also those into Do It Yourself DIY projects as well.
If you have any questions about the 1 series or the garden tractor, feel free to reach out. I'll do my best to answer your questions or get you pointed to the right person to answer than.
donbowman14@gmail.com or 904-838-3344
If you have any questions about the 1 series or the garden tractor, feel free to reach out. I'll do my best to answer your questions or get you pointed to the right person to answer than.
donbowman14@gmail.com or 904-838-3344
How Long Does it Take to Grind a Large Stump?
People often ask about stump grinding and folks ask about pricing for doing such a service. While I don't go over pricing here, I can help you gauge how long a job may take and therefore, you can use that info in developing a reasonable and fair price for your service. Hope this helps.
Просмотров: 172
Видео
John Deere 425 445 455 54 Deck Rebuild (Part 2 of 3)
Просмотров 225Месяц назад
Okay, so I just picked up the deck shell today from my powdercoat guy, Richard in Orange Park, FL. Thhis video has been largely complete for a few weeks, but here it finally is and I should have the third and final part out soon, which will be reassembling the deck and installing it on the 455AWS. Thanks for your patience. I hope this video has been helpful, I apologize ahead of time for my ram...
Tractor Side Hustle Considerations for Beginners
Просмотров 1,3 тыс.Месяц назад
About four years ago, I did two other videos on this subject and figured I'd update with the knowledge I've gained over the last four years.
John Deere 425 445 455 54" Deck Rebuild (Part 1 of 3)
Просмотров 7423 месяца назад
Before you go any further in this video, please know Part 2 won't be up for awhile. I will update this part of this video once Part 2 is up. So if you're intention is just to disassemble the deck, watch the video, don't yet expect a re-assembly video just yet. This is a teardown of a 54" deck. It is likely similar to a teardown of a 48" deck or even 60" deck from the same tractor series which i...
John Deere 455 is under a RATattack (okay, maybe it's mice)
Просмотров 3503 месяца назад
So thinking the shop was a good place to build a makeshift brooder for the new chickens, well it WAS, but then it invited bad neighbors over and that's what this video is about and how to take care of bad neighbors. Warning, animals were harmed and killed concerning, if not in the making of this video. This video is hopefully helpful to anyone else that has this problem, whether it be rats or m...
Which New John Deere Lawn & Garden Tractor Should You Buy?
Просмотров 4,6 тыс.4 месяца назад
So, this is by no means a very detailed breakdown of the models available and their late model equivalents, but simply a very general overview sprinkled with my opinion. I may do a more detailed video on each segment at a later date, but I often say that and deliver months or years later, so who knows. Free feel to comment and tell me where I went wrong. John Deere's big box tractors to their S...
Super Clean: How Well Does It Work?
Просмотров 2325 месяцев назад
So this is my first ever semi-paid video. Meaning they sent me the stuff and asked me to showcase and review it. It's something I would use, maybe even a lot of and it's not made in China, so I checked it out. See end of video for results.
Install Overview of Johnson 12 Loader on John Deere 140
Просмотров 1,2 тыс.6 месяцев назад
This is actually NOT an install video, but rather an overview since I already had it installed. Pretty straightforward, if not easy. It functions much better as properly equipped here rather than using the on-board hydraulic couplers which was a bust. I do have another video when it was installed in that arrangement, if you care to see how NOT to do it.
Subcompact Tractors for Subcompact Jobs (John Deere 1023E 1025R)
Просмотров 8936 месяцев назад
Lots of people ask how big an attachment they can fit on these tractors. I think that defeats the purpose of having a little tractor. These are the jobs they accel in, no bigger tractors could have pulled this job off and the 1 series is far better than a garden tractor with a loader, as the ergonomics of the 1 series is superior to garden tractors for "real tractor" work.
5 Useful Trailer Upgrades
Просмотров 8677 месяцев назад
So I have done a few trailer videos before, but these are the upgrades on my newest trailer. I have had this one for a little over a year now. These won't work or be useful for every trailer owner, but they should be useful to many.
How to Replace John Deere 425 445 455 AWS Parts
Просмотров 2,4 тыс.8 месяцев назад
While I don't cover every joint in the system, I do cover most of the areas that would need replacement. The expense wasn't huge, save the hydraulic cylinder, that was a pretty penny for sure. Most of the job was relativel easy and straightforward. But that depends on just how stuck some of the parts are. Instead of posting part numbers, I think the best thing would be to just post this link, w...
Change a John Deere 318 322 332 Charge Pump Seal & O-Ring
Просмотров 1,2 тыс.8 месяцев назад
I give a lot of credit to Kyle with Mrrbeef RUclips channel, I often look at his videos before I do anything, but we sometimes approach things & demostrate procedures a little differently. You can do this job without removing the engine or transmission, but you must remove the driveshaft. It helped that I already had it apart because I replaced the belt, so I kind of skip that portion of the vi...
John Deere Hood Material Comparison
Просмотров 1,2 тыс.8 месяцев назад
Okay to be fair, only one hood in the picture is a John Deere Lawn & Garden Tractor hood, as the plastic one is from a 1 series and the metal one is from a Craftsman hood. There were no metal hoods in John Deere L&G history that I am aware of, but people often say metal hoods are better, so we'll see how they work out. This is not a comprehensive overview, it's just a general video with the hoo...
How to Change the Fan Belt in a John Deere 322 (330,332) the Easy Way
Просмотров 2 тыс.9 месяцев назад
So, I figured I would make a video since there was nothing online on replacing it this way. Meaning all the official directions require taking the radiator out, which I think is an incredibly unnecessary step. Being careful, you can easily with some minor effort, remove the belt through the fan and not damage it. I have done it several times without issue.
Fuel Filter Fix John Deere 1023E 1025R
Просмотров 4,2 тыс.9 месяцев назад
This is a long overdue project/upgrade/fix but finally got tired of getting diesel baths, which really aren't a thing unless you own this tractor. Many people have probably already done this or something similar, but if you haven't this is how I did it.
John Deere 455 Project Part 2: We've Come a Long Way
Просмотров 1,6 тыс.10 месяцев назад
John Deere 455 Project Part 2: We've Come a Long Way
Progress Report: John Deere 140 w/Johnson Loader, Good & Bad
Просмотров 1,9 тыс.10 месяцев назад
Progress Report: John Deere 140 w/Johnson Loader, Good & Bad
John Deere X485: Specs, Capability and History
Просмотров 6 тыс.11 месяцев назад
John Deere X485: Specs, Capability and History
John Deere 455 Project Part 2: Axle Swap
Просмотров 541Год назад
John Deere 455 Project Part 2: Axle Swap
John Deere 425 445 455 4WS VS 2WS Comparison
Просмотров 800Год назад
John Deere 425 445 455 4WS VS 2WS Comparison
How To Remove The Transmission From a John Deere 425 445 455 AWS
Просмотров 814Год назад
How To Remove The Transmission From a John Deere 425 445 455 AWS
John Deere 455 Project: Part 1 Transmission is NOT Good!
Просмотров 1,5 тыс.Год назад
John Deere 455 Project: Part 1 Transmission is NOT Good!
Changing the Battery Out of the John Deere 1023E 1025R
Просмотров 5 тыс.Год назад
Changing the Battery Out of the John Deere 1023E 1025R
How to Change Your Hydraulic Fluid in 3 Easy Steps: John Deere X485 (X400/500 Series)
Просмотров 7 тыс.Год назад
How to Change Your Hydraulic Fluid in 3 Easy Steps: John Deere X485 (X400/500 Series)
Does a Mulch Kit Make a Big Difference on my John Deere 322?
Просмотров 2 тыс.Год назад
Does a Mulch Kit Make a Big Difference on my John Deere 322?
John Deere 755, Was a Hydraulic Fluid Service Enough?
Просмотров 5 тыс.Год назад
John Deere 755, Was a Hydraulic Fluid Service Enough?
John Deere 755: Runs Great, But NO GO!!
Просмотров 4,3 тыс.Год назад
John Deere 755: Runs Great, But NO GO!!
Which Older John Deere Garden Tractors Should You Spend Big Money On?
Просмотров 55 тыс.Год назад
Which Older John Deere Garden Tractors Should You Spend Big Money On?
Really late to the comments for this video, but I have the exact 3 bag mcs except mine has the Kawasaki. Is there a strut or something to help keep the top cover of the mcs up whilst you empty the bags? Ive checked online forums, nothing. I’ve checked the parts catalog, didn’t see anything, but it is incredibly inconvenient to hold up the top and try and wrestle out the grass bags. Is it poor design, or am I missing something? Wondering if you had some experience you could share. Thanks!
(I didn’t see you emptying the bags in the video)
I have a 2013 F150 DHTP 5.0L and it's the 8ft with supercab white. I've got over 203k miles on it and it's amazing. I built myself a drawer system to have my tools inside it with an aluminum ARE cap on the top, that basically equates to about 1000lbs of weight in the back and the truck doesn't even notice that stuff is back there. I was building a deck and put a substantial amount of weight in the back consisting of many 2x8s and the truck didn't notice them back there in the bed.
Great video
Thanks for watching.
They intentionally made battery removal unnecessarily difficult. Ridiculous.
Yep, it's hard to argue otherwise, plenty of space for it, but those two essentially pernament bolts make it impossible. I honestly kept thinking I was missing something, it couldn't be that hard, but it was without cutting one of those adjustment bolts off. They didn't need to be that long. Thanks for watching.
Is 1700 hours on a 345 too much?
Depends on condition mostly, but that is less than 100 hours a year, so not terrible. But I would want a cheaper price if I could get one. Thanks for watching.
@@FloridaDeere thanks for the reply! He is asking 1500 Canadian for it. The seat is in bad shape but the rest is decent.
@@Standardbredrescue That's like $1100 or so in USD, I'd say that's a good price for what you're describing. Go for it if it runs and operates well.
I'm about to receive my First Tractor at age 74. A JD 1025R with hoe, loader and Grapple. I'm as green as they come and I've been on a Learning Curve so hard that I'm needing a 5 point Harness. LOL This ''Tractor" thing is Intense! It's a bit like a "Religion"! There's So Much at Risk with money and injury that you BEST do your homework before and After and be a very Sober person. So it seems that I Joined the Church of John Deere . LOL
Haha, yes, it is a bit like a cult, but a good one if such a thing exists. And you ain't lying either, it's a steep learning curve. The dealer sends you out with little to no training. They rarely mention ballast, which is critically important. Rollovers kill more people than any other issue on tractors and are often easily avoided. But having said all that, they are a force multipler for sure, making it possible to get unreal amounts of work done with little effort, so they come with a positive as well. You just have to mitigate the negatives. Thanks for subing and watching, I hope to see you around. They have a good Facebook group too with the 1023/1025 guys as well, lots of good guys on there.
@@FloridaDeere They kicked my off Face Book a few yrs back for ragging on the Covid Vaxx!😜
Just ordered a 511 for my coming 1025R with a JD Grappler! Thanks and so I Subscribed as apperciation!
Thanks for the sub man and watching the video. It just shows you that procrastination rarely pays off and in thi case costed me big time.
It looks like the vent cover on top of the transaxle was missing, causing it to leak. I'm curious why you converted back to a regular steer tractor; I just picked up a 425 AWS and didn't know if it had issues.
I keep it AWS, I switched the axles and resinstalled a "new to me" center diff with those axles. I think I have the switch over in the next couple of videos after that one. Thanks for watching.
I have a 1999 Kubota G1900 Lawn and Garden Tractor. Built like a tank in every aspect including the 3 cylinder diesel engine - 840 hours on it and engine still purring.
I like the Kubotas too, also a good quality high resale tractor with a very good name. Thanks for watching, I won't tell your Orange buddies you are watching a Green channel🤣🤣👍
Nice video! Add a quick hitch to push the blade back 4-5” and that should help a good bit.
That or having a Woodland Mills Stump Grinder would work also. They certainly have their advantages. Thanks for watching.
@@FloridaDeere I have the Woodland Mills and a quick hitch and it’s definitely got a good bit of reach.
@@BigDaddyAddyMS I do like that feature of the WM, but it also is a negative at other times. Sometimes I work in terribly tight spaces and any longer and it won't work. However, the best thing about the WM that is not a negative, only a positive is the higher kick stands, the B's stick down too far and there is NO upside to that.
Why does the picture of the 318 at 9:58 have 3 hydraulic levers? Thats not original.
Good eye, yes that is not standard or even an option, but that was a buddy's tractor and he upgraded it with a 420/430 hydraulic system, so he has three circuits. Thanks for watching.
What is double pulley you said power flow
So the double pulley runs an additional belt that turns the fan/propeller in the leaf collector unit you can add. The power flow is the mechanism that mounts to the end of the deck and then a chute goes/leads to a bagging unit for collection. It's a pretty efficient system. I have had several videos showing various systems if you wanted to browse a few more videos. Hope that makes sense. Thanks for watching.
I have a John Deere G100. 26 years old and it was the best $1000 I’ve ever spent😊
Awesome, thanks for watching.
I know this is an older video but I find you videos very well made and helpful. If I can ask, what is the purpose/use of the taller relief valve? I have never seen that done before.
It being taller may have more guts in it to prevent a surge to the transmission. As I understand it, without this particular relief valve, you will eventually blow the transmission.
@@FloridaDeere would you happen to have a part number for it? I have has a loader on my 455 since I have owned it and it does not have one and I do not want to take any unnecessary risks
Years ago I bought a used John Deere STX38 lawn tractor for $300(best $300 I invested) but had some repairs over the the years until last year when I believe the engine head gasket failed(not a mechanic). I looked into repairing it(basically getting a new engine) and didn't like the price. So I started looking for a new lawn tractor. Talked to my dad and he told me my uncle was selling his John Deere GT 235 for $1500. In the process of buying right now. I don't mind push mowing my lawn but its so much easier to get a lawn tractor. Good to know its a better lawn mower. PS my dad on his farm has not only 2 JD 425's but also a JD 650, JD 4720 and a JD 5410. He has a tractor for each barn, garage or shed, lol.
The 4720 is a super nice rig, but the 425's are great as well. The GT235 is an entry level garden tractor, but a darn good one, if taken care of, they can easily last at least 21 years and counting as my father-in-law is still using my old one that I bought brand new in 2003. Thanks for watching.
Why would you buy a John Deere when these morons went woke?????
I have one Great super garden tractor
They are awesome, big enough to do big work and small enough for the yard in general. Thanks for watching.
I think it's an informative video, for sure. I just don't think anything in the current Deere lineup shown compares to the older 316/318/420/430. The frames aren't even close to as overbuilt today, and you got way more metal for your money, I think. Today's machines are just so filled with plastic everywhere and gimmicky logos and stickers meant to impress people walking by the machine by calling out anything that could be considered a feature, like "hydraulic lift", or "fuel injection". The newer multi-piece fender decks rot at the joints where the older single piece decks couldn't. I think a lot of this "downgrade" is as much about catering to a less mechanically capable consumer as it is trying to hit a bigger customer base with lower price points. Owner's manuals used to tell you how to set valve lash; now they have to install circuits that keep people from backing over their kids with the deck going. I completely agree with just going to a 1-series SCUT vs a high x700. Jm2c from an old small hold farmer. 👍🏻
Yeah, I think they aren't as overbuilt as they were, I think that is designed engineering to a certain extent, meaning they realized at one time, they were over built and didn't need to be. But you are right about the focus of quality and them trying to reach a different consumer. Many of these used to be built as capital products as opposed to throw away consumer products. I still think John Deere builds a good product, but if they are not careful, they are close to building stuff in which people will start looking elsewhere for replacements. Back in the day, they didn't have their "consumer lines" like they now sell at HD and Lowes. Yes the company got more sales, but I think these products tarnish their name a bit. I'm a purist too to a certain extent. I mean Porsche used to sell sports cars, now they sell sedans and SUV's, it's just weird. These products I guess allow them to make more money and stay in business, but to me, it waters down the brand a little. Thanks for watching.
I have one that I restored and trying to figure out the Vin number to it any ideas how to help me figure it out
Sometimes Deere can track down the VIN if you give them the engine serial number. If one dealer doesn't want to help, try another, I've heard of people getting the VIN's this way. I hope they help you out and thanks for watching.
The 318 came out in 83; initially powered by an Onan B43G at 18 HP, then in mid-84 and on with an Onan P218G at 20 HP. 👍🏻
Thanks for watching.
Got a 2015 F150 5.0 this was a great video. I’m at 105,000 miles. Preventative maintenance is important. Most folks don’t want to spend money and cheap on on parts and maintenance and end up paying a lot more in repairs & or vehicle not making in to 200,000 miles or more. Who needs a Haynes repair manual when you have people like you😎👍🏻
I appreciate the comment. I agree, maintenance goes a long way in keeping vehicles for a very long time. And scheduled maintenance is almost always better than unscheduled maintenance, I say. Thanks for watching.
The Chinese parts never fit
I owne a 455 was and discovered Amazon sells all kinds of counterfeit parts for the jd 455 was.
I haven't noticed that on Amazon, but have on eBay. Although, I don't doubt your experience with Amazon either, I can certainly see that being the case. Buying from the dealer can be pricey, but is often the sure way to get what you exactly need. Thanks for watching.
GREASE GREASE GREASE GREASE !
For sure.
I have a 455 diesel all wheel drive, I used to remove my 72”. Owing deck. Mine is late 1990s it’s a tough job removing the deck., the newer models you can just drive over the deck and connect it up.
Yeah the decks are harder to remove on these tractors, harder than the newer ones, but still easier than the older ones like from the 70's and 80's. The problem with the 455 is they are usually a 54 or a 60 and the 60's are 300lbs, so nothing is easy. Love my 455, but the drive over on my 1023E is super easy...as long as all the equipment is aligned correctly, if it's not it's a mess. Thanks for watching.
Thanks for the review. Not that much on the 1023e. I have a 2019 1023e which I love. I am having a rear lift hydraulic issues. The amount of lift is randomly variable from 0 to full. Goes down fine. Front loader works fine. I gave changed the hydraulic fluid and filter and cleaned the magnet screen. A little metal flake (150hrs) not visually different than I see others video at 200hrs. I have search internet and spoke with 4 different dealers, no one has seen this problem before. Any ideas. Thanks. David
Nice job god bless
Thanks for watching
Thanks god bless
Thank you for watching sir.
455 is definitely king!
Yes I love mine and I also loved my 445 as well. Thanks for watching.
John Deere tractor from the past where built tough. I bought a 110 new in 71. I mowed with it until probably 2015ish. That's when l tried my sons ZTURN. Next weekend l had one. Now my grandson is mowing with the old 110. Those old Kohler engines are so simple to work on. Through the years it did a new deck. And a couple rebuilds. It smokes a little but it just keeps running and also keeps the mosquitoes away.
Simple and solid, two great words to describe those tough tractors. Thanks for watching.
1500-2500?! Bro where tf are you; these things are between 6-8 THOUSAND dollars near me
HAHA, yes the market is certainly different in different areas of the country. And of course, the cost depends on condition as well. It always seems in Florida, this stuff is cheaper, but it's also more rare and less buyers willing to pay the large amounts of money. Last year, i picked up a 455AWS for $1900, it did need about $300 or so of work, but it's in pretty good shape and operates well. It seems they are the most expensive in the Northeast and Mid-West is what I gather. Thanks for watching.
Have you ever tried Free All? Its like PB blaster but I have found it works better on rusted parts.
I haven't tried that product yet, I will have to give it a shot, thanks for the tip. And thanks for watching.
what are the filter numbers
Has anyone bought the extension kit? I've found that if I go too deep, the driveshaft separates. I just don't know if that 3" extension makes that much of a difference. Especially at $300...
The location of this filter and the fact that JD DOES NOT provide a shut-off for it is just another example of why JD is laying off employees. They need to hire engineers that are skilled in farm equipment not video gaming.
Man, you are not wrong, it is a terrible location and no shut off makes it a lot worse. Thanks for watching.
The spacer is for when you tighten the shaft bolt it doesn’t crush or deform and tighten the bearings
Yes, thank you.
My fwd anf reverse lever is very tochie not at all smooth got any ideas
They can be a few different things. The first thing I would do is change the fluid if you haven't yet. That fixes a great number of issues with hydraulic machines. The second thing I would do or if you already have done the fluid is check the slop in the linkage for the hydro levers. Remember these tractors are now quite old and may have a fair amount of wear and tear on them. I'm assuming you have a 300 series tractor with the hand controll lever?
what attachments and work can i do with my john deer 2011 26 hp mower
What model do you have?
Can you do a video showing your current deere collection? Seems like you got rid of most of your vintage stuff
I might can do that, and you're right I did, or in another way of putting it, I got rid of most of my tractors that didn't run😂. I still have the 1023E of course, as well as the 322, 455 and a 140 and 316. The last two are being sold as soon as I get a chance to finish them up and let them go. And I keep thinking of trying to trade out my 322 for a 332 to keep all my tractors with the same fuel type, just figure that will make things easier, but the opportunity has presented itself. And I will be looking for deals in the future, but a few years ago, I let things get out of controls and as my kids age and do more things, I find myself with less time as well. But in less than 5 years, I'll go from 3 kids at the house to 1, so that may make a difference as well. Thanks for watching.
Drain the fluid through the "drain" plug at the end of the screen housing b4 draining the side plug thata way you can drain into a 5 gallon pail, much less of a mess.
If I should happen upon another 755 Mark, I will take your advice, always looking to steal other people's methods when they are better than mine👍👍. Thanks for watching.
I have a 190c that was bought at a Dealer! just a fact for you!
Yes dealers sell all kinds of Deere, but they are the only ones that sell the higher quality and priced ones. Thanks for watching.
Hi Great idea. I wonder of you could use both springs and rubber bumpers. Do you have any experience with 1023e rear lift arm issues? Mind raise random heights. Lower fine? Thnx. David
Raise random heights, like something beyond your control? I mean they should raise at a rate and speed you like and lower the same. Of course the lowering is simple gravity as it drops, there is not any hydraulic force to push it down, unlike going up. Also, you can adjust the speed at which it raises and lower by adjusting th eknob under the seat. If any of this is stuff you already know, I apologize. Thanks for watching.
@@FloridaDeere what I mean by random heights is one time using the lever I raise it and it suddenly stops raising at 2”, after lowering, next raises 1”, repeat 6”, repeat May be complete lift. Once the lifting stops the only way to get more lift (maybe) is to lower all the way and try lifting again. I did notice today that over a period of a few hours my loader lowered itself? Thanks for your assistance with this. Cheers
I enjoy the diesel bath..😂😂😂
Bigger tractor would solve your problem.
I solved the problem by selling my pick-up, now the height of the bucket doesn't matter... as much😂. But seriously, this tractor is rightly too large already. Thanks for watching.
This is the first video that popped up when searching 2018 F-150 5.0 sparkplug and coil replacement. Just thought you might enjoy hearing that. This was the perfect video explaining it. 🤘🤘🙏🙏
Thanks man, I appreciate that. It started as a slow video, but eventually got rolling pretty well. Thanks for watching.
Hey!! Nice to hear from someone who lived in Maine. My home is about 10 miles from Maine. I was just talking with my wife about our first date at the Presqu’île Maine fair 46 years ago. This state is part of our culture. And….manny in Canada are Red Sox Nations Citizens.
Yeah, sadly, we didn't live up there longer, those were some of my formative years, age 4-10, then to Florida as a Navy brat, been here ever since and truthfully I belong in the mountains of North Carolina or Virgina, probably only place I could move my Florida-born wife if I can even get her there, maybe we need to live in different states. 🤣 She can stay here and melt and I can enjoy a state with real seasons.😎
Fringing snow and ice and freezing rain and cold is hard on machines. I have a 2025 for snow a woodlot. I don’t do work for others except to help a buddy in a bind. I imagine heat and humidity is a challenge in Florida.
Yep my experience in Maine was an a kid, I'd assume that would be similar to Canada, but I was young enough to enjoy the snow and not have the "work it" so to speak. Our winters are nice, but honestly, I hate doing any work outside from May until November, it's terrible but in a diffferent way. I dislike being soaking wet, and if you stay outside any length of time, you'll go through several outfit changes to stay dry. Problem is, I love working outside.
I’ve had a lx277 23 years. Kawasaki twin. 530 hours and still runs great. Never dreamed a meet would
That's awesome, I imagine you maintain it very well too. Thanks for watching.
Up here in Canada, many with small tractors do snow removal. It was a challenge in the past for them to get paid in spring because customers would argue on various things or not pay at all. It’s different now. They give you a price for the job in the fall and expect $$ before the first snow.
Oh wow, that's opposite of what I have seem , getting paid before the job I mean. I guess I have been lucky in the sense of never having an issue getting paid. I would love to make money doing snow removal...says me from Florida never having had removed snow😂. Thanks for watching.
Make a mini-scraper to scrape out most of the lumps of ???? that you can see. It'll help in the cleanup ?
That's a good plan, I'll have to try that on the next one, as this has been through two more owners since. I guy I bought it for, like went and retreived it for, had to do a few more clean outs and he got it working good and has since sold it I believe. Thanks for watching.