Видео

@@hendriksaldua8208 Hello. I’ll have a look this evening and update my OCCT and let you know. Cheers

So, I never did this however the mod still worked. Unless I’ve done this in the past

So my question is , did you use the regular frame regen before this mod? Or does this mod unlock it if your card doesn’t? I’m a little confused lol

@@byggsak7358 I was using DLSS 3, tested FSR also. This config actually got it at a low or 55FPS and it runs at 80-100fps.

Hello! The cpu is cooled using Alphacool Eisblock waterblock in a full custom loop. 💦

@@tisikygaming Oh wow very cool! thanks for the reply!

wow calm down bro, game's really good but has bad optimization for launch

@ it’s a catastrophe Sven

@@NeoWordxonly bad optimisation? It’s unplayable for 90% of people…

@@Thiiiiij exactly for me after 10 to 15 mins of gameplay i get very low fps while on fsr3

@@RomanQwest Hello, no I haven’t deleted any comments! Glad to have another subscriber! Game on!

Hi, been having issues getting working for steam do you happen to know where the files go, thank you. EDIT: I got it working for anyone who is having issues getting it working you need to have hardware gpu scheduling on.

@@rodneyevans3848 where did you put the files and where can you find GPU scheduling

@@henryscott6082Make sure windows and GPU driver are update to date. Type graphic settings into search bar on windows, then enable you scheduling will have to restart pc. Put the two files in the main folder of stalker 2, then Stalker 2/Binaries/win64 and put them their as well, this is for steam might be different depending on where you bought it.

@@rodneyevans3848 Thank you much appreciated, im not sure why but I have no option to turn on my GPU scheduling

Not had chance to fully test it yet, I’ll be doing some more videos over the weekend!

I wouldnt mind the FSR 3 but the lag as you said is very annoying, and also every few seconds, all world textures a blinking, having spazms😢

Are you using a VPN? I had this issue on a few of my games and I eventually narrowed it down to me using a vpn. If not that, could be GPU/cpu instability or PSU issue.

@@RomanQwest There's a mod that reduced my input lag by 20% and haven't seen a flickering texture since, dunno which one did it but one of these i assume 1) Ultimate engine tweaks 2) Optimized Tweaks i also suggest getting Equalized aim sensitivity and with these 3 mods the game has been almost perfect for me.

Try setting low latency mode in nvidia control panel. Also try with Lossless upscaling 2x performance mode.

@@GoldBeta At which frequency for 900mv?

@@tisikygaming 1794

@ how are you detecting instability?

@@tisikygaming Under heavy load my GPU drivers crash

@@GoldBeta ok what stability testing have you done before going into gaming?

@@markgusbyanyo thanks bro!

I think it should be. Worth checking the manual and updating to the latest bios to get access to PBO2 and CO.

Kombo Strike is essentially Curve Optimiser but with options -10, -20 or -30. I used KS initially but now full PBO2 and CO is available so I use that instead.

@@pav1u It’s been long known that CP is a poorly optimised game! Plus it’s always worth stress testing with several different scenarios.

I believe Asus Performance Enhancer is PBO presets so it’s similar in a way but you should check the ASU’s website to fully understand what it does as I haven’t used an Asus board.

Yes cooling is necessary for the CPU.

81c? Still too high in my opinion.

This is when you click apply XMP? And not touching any other settings?

Clearly something else is wrong with your computer, if you followed my guide there would be nothing wrong with your pc. It’s impossible to break a computer by undervolting it. It seems most likely your system is unstable with the settings from my guide. In which case you should reset the CMOS.

@@tisikygaming brotha, I followed your guide exactly, and after hitting F10 to save bios settings my pc never booted up again, my pc is only 2 years old, i dust and clean it every day, run constant benchmarks, there is absolutely no other possible cause for it not working especially considering it was immediately after changing bios

@@DeathReserves like I said previously, it’s impossible for this guide to “break your pc”. The cpu is being fed less voltage. So if your computer doesn’t work anymore it must be some other fault.

@@tisikygaming such as? There is absolutely no other explanation, the pc turns on sure but no display, again, there is absolutely no other possible explanation for it no longer working immediately after following your tutorial

@@DeathReserves well most likely scenario is that your computer isn’t capable of running the undervolt listed here. In this case you should reset the CMOS and restore optimised default in bios.

means that its not stable on your build...you have reset bios and choose different values to undervolt/clock.

@@RABBiT.94how do you do that I’m having the same issue and my screen won’t turn on or anything so how do I reset it without having actual access to my computer I’m losing my shit right now

@@DeathReserves search for CMOS reset for your specific motherbaord model (most motherboards it will be the same method of doing it), it looked very complicated for me week ago but after doing it you will get used to it and u can safely experiment bios settings without fear.

What do you mean by see how high the cpu can go? The cpu won’t run at any faster speed, and it won’t bottleneck at 1440p low settings.

@@tisikygamingI mean how many fps can it deliver if the GPU is not the bottleneck. The lower the GPU load, the less it bottlenecks and the more you see the effect of the CPU. Of course playing at 720p Low would be more indicative.

Toasty! Try run an undervolt

repaste, undervolt.

Yes follow the video instructions and do it in the bios.

Your cpu needs higher voltage and power limits then.

Yes you can set PBO limits manually. But you wouldn’t want to. The limits in the video are more than enough to let the 5800x3d run at a decent speed!

Flickering indicates unstable settings. What cpu do you have and what settings are you testing?

@@tisikygaming I have the same CPU you have and I am running the same test parameters

@@nickorozco4301 And what sort of flickering? Does it happen all the time or only during a cpu stress test? Is the ram set to xmp? I would try manually setting the ram speed, timings and voltages. I would also look at your GPU cable and overclock if you have one set.

@@tisikygaming flickering of my desktop. Happens every few seconds and I do have XMP enabled

@@nickorozco4301 Could be GPU related if it’s overclocked (or monitor cable). Or it could be your PSU. Is it an old PSU? To rule out the cpu you can try reset cpu to optimised default.

Nice one ☝️

Hello. Yes I will try to do so after a major update. Cheers!