![AJB Holsters](/img/default-banner.jpg)
- Видео 58
- Просмотров 139 685
AJB Holsters
Добавлен 29 мар 2020
Archery Release Aid Holsters
Firenock Aerovane III Noise Check
Video made at the request of a subscriber. I'm going to be recording the noise picked up from my cameras of various vanes flying by them to see what they sound like downrange. Some are definitely quieter than others.
This video is fairly rough and unpolished.
This video is fairly rough and unpolished.
Просмотров: 183
Видео
Teaser: Archery Form Consistency Video Series
Просмотров 454Месяц назад
Recorded myself drawing and anchoring for 4 ends of 5 arrows and then my follows-through on the shot. While I wait for my UV Button Clone to arrive, I thought I would tease a series I am working on regarding the importance of form consistency. An archer should hone his craft to the point where the only thing to which he should need to focus his attention is the shot process. Everything else sho...
Plural Designs USA HFE-1 OnneX Arm and Barrel Kit
Просмотров 1,5 тыс.2 месяца назад
An overview and analysis of a new product from a new designer. I go over the features as well as its advantages and limitations over the stock OnneX Trigger Bar and Post system. His Website: plural-designs.com My Stuff: AJBHolsters.etsy.com www.artandarchery.com Timecodes: 00:00: Intro 01:15: Disclaimer 02:30: WTF? 03:22: What is it? (contains features, advantages and fit and finish) 06:50: Dis...
Total Archery Challenge (TAC) - 2024 - Seven Springs Pa - Ultraview Course
Просмотров 4952 месяца назад
Our third and final course at TAC 2024 before we headed home. This course was the quickest and was not as difficult as last year in terms of the hike through it or the targets. I still managed to put in a mediocre performance, but we had a good time.
Total Archery Challenge (TAC) - Seven Springs 2024 - RMEF (Rocky Mountain Elk Foundation)
Просмотров 8212 месяца назад
A somewhat better outing than Hoyt, we shot the Rocky Mountain Elk Foundation Course and were joined by Nick, an archer from Canada. You may hear a high pitched noise in the background in some of the frames. That is the brakes on the bus that was ferrying archers to the Hoyt course. We chose to think of it as being serenaded by the Varied Thrush, a bird that also happens to sound like a set of ...
Archery Tools ad Nauseum: Arrow Pullers
Просмотров 1,6 тыс.2 месяца назад
I go through the various types of arrow pullers and their benefits and drawbacks. They are not all created equal and you absolutely get what you pay for. Timecodes: 00:00: Intro 00:08: Housekeeping and Disclaimer 01:49: Energy and How We Use and Waste It 03:13: Waste #1: Pulling too Much Weight 03:51: Waste #2: Arguing with Strangers on the Internet 05:21: Waste #3: Pulling Arrows by Hand 06:41...
Total Archery Challenge Seven Springs 2024 - Hoyt Course
Просмотров 2,2 тыс.2 месяца назад
Some highlights and lowlights of my attempt to shoot the Hoyt Course at TAC 2024 Seven Springs. We shot the course at 11am, immediately after driving here from the other side of the state. I can't say I am proud of my performance, but I've also never claimed to be a stellar archer, and I don't only post video of myself when I am at my best (which I definitely wasn't here). Hopefully I will get ...
Archery Releases ad Nauseum: TRU Ball Ultimate Flex
Просмотров 2,1 тыс.3 месяца назад
An extensive analysis of the TRU Ball Archery's new for 2024 Ultimate Flex. I also talk about offerings from other manufactureres and tie it together with why it's relevant. Timecodes: 00:00: Intro 00:34: Disclaimer 00:54: Award Winning? 05:00: How Much?????' 05:10: What is it? 06:16: What comes in the pack? 06:53: Getting a little greedy, aren't we? 7:30: Fit and Finish 08:16: Get a Grip 11:10...
Archery Releases ad Nauseum: Evolution Outdoors Ibex Release
Просмотров 3,6 тыс.6 месяцев назад
Deep dive video essay reviewing the 2024 Evolution Outdoors Ibex Hinge Release. Timecodes: 00:00: Intro 00:31: For your listening pleasure..... 00:52: Disclaimer: I am not a shill 01:24: Beta Testing and QC 01:45: Made in the USA 02:20: Punching Up...... 02:41: Who? 03:11: What? 04:55: What comes with it? 06:10: Features and Options 06:24: Thumb Peg Assembly 08:50: Lanyard Attachment? 09:45: Al...
Archery Release Hinge Head Angles and Why They Matter
Просмотров 1,4 тыс.7 месяцев назад
Excerpt from my "ad Nauseum" video on the Stan LynX explaining why the geometry of a hinge release's head and neck determine the speed the hinge can be set. This may explain why some people have issues with certain releases over others.
Archery Releases ad Nauseum: Stanislawski LynX Hinge
Просмотров 2,7 тыс.7 месяцев назад
My usual longform essay review. Please excuse the sound of my furnace at the beginning and some chirping from my birds (I don't have anywhere soundproof in my house to record) Timecodes for Topics: 00:00: Intro 00:26: Disclaimer 01:22: LAS as Social Media Manager 03:05: What is it? 03:55: What's in the Box? 05:52: Sizing and Ergonomics 08:53: Living Dangerously 09:35: How many fingers am I hold...
Archery Sights Ad Nauseum: UV Slider (Side Mount)
Просмотров 4,1 тыс.8 месяцев назад
Longform Video Essay Review of the Ultraview Slider. Timecodes: 00:00: Intro 00:38: Get 'em While They're Hot 01:25: Disclosure: I don't lick boots 02:22: What is it, Why is it, and Why does it cost this much? 05:23: Open your wallets, you peasants 06:42: What's in the Box? 09:10: The Scope as Offered 10:08: The Sight Rail 10:33: Colors and Accessorization 10:45: We care about lefties, we swear...
Archery Releases ad Nauseum: TRU Ball Executive Flex
Просмотров 3 тыс.9 месяцев назад
An intensive analysis of the TRU Ball Executive Flex Hinge. I'm a bit more raspy than usual, and I think I'm fighting off a mild head cold. Timecodes: Intro: 00:00 Coulda, Shoulda, Woulda: 01:33 Available Now, Trust Me Bro: 05:30 Features: 06:14 Sticking its neck out for us: 06:59 Lanyard Attachment: 10:17 Fit and Finish: 11:30 Sizing and Ergonomics: 12:01 Aggressive Head (giggity): 12:30 How M...
Archery Releases ad Nauseum: B3 Archery Huuk & Huuk Mini
Просмотров 7709 месяцев назад
My typical dissection of the B3 Huuk and Huuk Mini. There are good things about it, unusual things, and there are things in the meta that are worthy of constructive criticism. website: www.artandarchery.com Etsy Shop: ajbholsters.etsy.com Timecodes for Topics: 00:00: Intro 01:21: Swarm of B's (random aside; feel free to skip) 02:57: Open-Hooks a Plenty 03:29: 2 Releases, 1 Bow 04:05: Features a...
Archery Sights ad Nauseum: Trophy Ridge REACT One Digital
Просмотров 8209 месяцев назад
Longform analysis of the Trophy Ridge REACT One Digital Bowsight. Timecodes: 00:00: Intro 03:28: What comes with it? 04:13: How much does it weigh? 04:54: Additional Mounting Options 06:54: The Included Scope 07:42: Don't like the scope? No problem 08:13: The Unit 09:34: Fit and Finish 10:53: The Scope (cont'd) 11:25: Sighting In-Adjustment 14:26: Sight-In Mode 15:06: Speed Mode 17:03: Does it ...
Archery Releases ad Nauseum: Carter Whisper 2 & Whisper 2 Small
Просмотров 4,6 тыс.9 месяцев назад
Archery Releases ad Nauseum: Carter Whisper 2 & Whisper 2 Small
Archery Rests ad Nauseum: Bodoodle Influence
Просмотров 45010 месяцев назад
Archery Rests ad Nauseum: Bodoodle Influence
Archery Sights ad Nauseum: Dialed Arxos Bowsight Part II
Просмотров 42610 месяцев назад
Archery Sights ad Nauseum: Dialed Arxos Bowsight Part II
Archery Release Holsters - Bow Bracket Attachment
Просмотров 83011 месяцев назад
Archery Release Holsters - Bow Bracket Attachment
Archery Sights ad Nauseum: Dialed Archery Arxos Bowsight
Просмотров 1,7 тыс.Год назад
Archery Sights ad Nauseum: Dialed Archery Arxos Bowsight
Stan Onnex Clicker Follow-Up (reupload)
Просмотров 7 тыс.Год назад
Stan Onnex Clicker Follow-Up (reupload)
Archery Releases Ad Nauseum: Stan Onnex Clicker
Просмотров 9 тыс.Год назад
Archery Releases Ad Nauseum: Stan Onnex Clicker
Total Archery Challenge 2023 - Seven Springs Pa - Hoyt Course
Просмотров 1,2 тыс.Год назад
Total Archery Challenge 2023 - Seven Springs Pa - Hoyt Course
Total Archery Challenge 2023 - Seven Springs Pa, RMEF Course
Просмотров 1,1 тыс.Год назад
Total Archery Challenge 2023 - Seven Springs Pa, RMEF Course
Total Archery Challenge - Seven Springs Pa 2023 - Ultraview Course
Просмотров 3,2 тыс.Год назад
Total Archery Challenge - Seven Springs Pa 2023 - Ultraview Course
Archery Releases Ad Nauseum: TRU Ball Trident Flex and Pro Flex
Просмотров 2,6 тыс.Год назад
Archery Releases Ad Nauseum: TRU Ball Trident Flex and Pro Flex
Stan Onnex Hinge Slow/Medium/Fast Click Review
Просмотров 2,2 тыс.Год назад
Stan Onnex Hinge Slow/Medium/Fast Click Review
Great video. Love my Onnex.
@@sthompson447 thank you for watching. There is a lot to love about them 👍
What a beautiful place for a 3-d TAC. I went to the San Antonio one two years ago. It was fun I guess but once was enough for me. Those crazy ridiculous long shots aren’t my cup of tea. Day one is used my hunting setup and my 3-d competition sets day two. I shoot at home to 60 max with my hunting rig in case I need a follow up shot on something. At 74 years old I’m not doing any mountain TAC for sure. The only thing I can see getting in my 50 and 60 yard shooting is working on form and maintaining my shot timing sequence. 👍👍
@@timbow50 thank you for watching. It was, indeed, a nice, scenic area to loose some arrows. Hopefully one of these days I'll get out to Utah or Big Sky, as those are supposed to be outright majestic. The events themselves and the target presentations are not exactly practical for anything other than practicing for more TAC, but the idea is to challenge the archer with targets and distances to which they may not have access anywhere else. The terrain can be challenging as well. That said, I think you're right. Most of the people, including myself, would be better off honing out craft at closer yardages before we attempt to lob arrows out past 100 yards. I think TAC might just be part of an elaborate conspiracy by Big Shaft to get archers to buy more arrows. 😜
I had a passing interest in this release only because of the internal settings adjustment design but Iam glad I have seen this video. The thumb and lanyard attachment design does look pretty pathetic. Having not held one I was curious about the head angle. I am very sure you have saved me from wasting a lot of $. 👍👍
@@timbow50 thank you very much for watching. I'm glad you found the info useful. I think they deserve credit for trying to offer something new to the market, but I find the design insufficient to justify the high price tag. Maybe if it was $100 cheaper I could recommend it, but not $300-350. There are a myriad of better options available for less.
I heard Brett Cook the General Manager at Seven Springs Mountain Resort was dating a new man are you him? Yu seem like a great couple.
@@6string853 shhhhhhhh........ It's a secret 😂
If you had to choose one, which would you choose? The Stan Onnex or the ultraview button?
Hello and thank you for watching. Here's a writeup i did for another person who asked a similar question: The release I tend to recommend most often is the Stan OnneX, particularly the Clicker version because you can set it to be used with or without the click by adjusting the trigger travel. I discuss that in my review on my channel. The reasons I choose the OnneX over the UV Button are as follows: -The OnneX comes in 5 sizes and the sizes are distinct from each other in all dimensions (size, thickness and even the finger attachments are adjusted by 10% between sizes). So you have the best chance of getting a "fitted feel" as compared to other releases. The UV Button comes in 2 sizes, medium and large. The medium would equate to an OnneX Large, and the Large equates to an Extra extra large. -The OnneX comes in a kit with two lengths of thumb peg post, two sizes of thumb peg, 3 and 4 finger attachments, trainer lock pin, and the tools necessary to make adjustments. The UV Button comes as a 3-Finger, and any additional configurations must be purchased separately. -The OnneX's finger attachments are sweep-adjustable. So you can further adjust the handle to fit your hand. The Button's finger attachments are not adjustable. -The position of the hook on the OnneX is fairly "standard" and can be paired up with a variety of other thumb releases and hinges without the need to adjust the archer's anchor point or d-loop length. So if you are looking to use a hinge and a thumb with the same bow, you can mix and match brands of releases to get a combination that works on your bow and gives you the same point of impact without having to match your method of shot execution (i.e. squeezing the trigger on the thumb release will hit in the same spot as executing the hinge with back tension). The UV Button's hook height and position are unique and pairing it with any release except the UV Hinge is far less likely (and it may not give you a similar point of impact with it, either). It may also require adjustments of d-loop length or even draw length in order to anchor comfortably with it. Both releases use a spring-gate to capture your d-loop and hang the release on it. The OnneX opens toward your face and the UV Button opens away from your face. One odd quirk of the Button some archers are encountering is the d-loop can slip between the hook and the spring gate if you draw the release at an odd angle. I've never had this issue because I draw thumb releases with the handle perpendicular to the string. The OnneX does not have that issue due to the direction the hook opens. Both the OnneX and the Button are good releases and if you set your bow up for either one exclusively, you should have good success whichever one you choose. That said, if you have to buy it sight-unseen, your odds of being able to set the release up in a configuration that works for you are the highest with the OnneX. As far as sizing goes, I have printable PDFs on my website (www.artandarchery.com) and www.stanoutdoors.com does as well that you can print you and get an idea of what size you may need. I'm not familiar with how gloves are sized in Australia, but I wear a size Small glove and a Medium OnneX fits my hand perfectly.
@ajbholsters2035 Awesome, thank you for that exhaustive and thorough reply. You pretty much confirmed my thoughts. I have decided the onnex has more adjustability, and you get more for the price. Thank you again for you help.
@@Tullminator my pleasure, and if you have any other questions, please feel free to hit me up. Take care, stay safe and happy hunting 👍
You and Derek from More Plates More Dates share a studio?
@@moewells100 i had to look it up, but it would appear we have the same interior decorator. This was before I had a dedicated recording space.
Great review, love the detail. Can ask what thumb release you find the best? I am interested in the onnex and the ultra view UV but there are no archery shops near me to test them, will be a sight unseen internet purchase sadly. I am not a hunter, mainly target shooting outdoors, some 3D
I'm going to copy the message I sent you on Etsy In case anyone else is trying to make a similar decision: Hello Justin and thank you for checking out my content and my store. I'll see what I can do to narrow down your options without leaving you with a case of "option paralysis". There are a lot of options and there are very few releases I outright would not recommend, so I'll stick with the two you mentioned. The release I tend to recommend most often is the Stan OnneX, particularly the Clicker version because you can set it to be used with or without the click by adjusting the trigger travel. I discuss that in my review on my channel. The reasons I choose the OnneX over the UV Button are as follows: -The OnneX comes in 5 sizes and the sizes are distinct from each other in all dimensions (size, thickness and even the finger attachments are adjusted by 10% between sizes). So you have the best chance of getting a "fitted feel" as compared to other releases. The UV Button comes in 2 sizes, medium and large. The medium would equate to an OnneX Large, and the Large equates to an Extra extra large. -The OnneX comes in a kit with two lengths of thumb peg post, two sizes of thumb peg, 3 and 4 finger attachments, trainer lock pin, and the tools necessary to make adjustments. The UV Button comes as a 3-Finger, and any additional configurations must be purchased separately. -The OnneX's finger attachments are sweep-adjustable. So you can further adjust the handle to fit your hand. The Button's finger attachments are not adjustable. -The position of the hook on the OnneX is fairly "standard" and can be paired up with a variety of other thumb releases and hinges without the need to adjust the archer's anchor point or d-loop length. So if you are looking to use a hinge and a thumb with the same bow, you can mix and match brands of releases to get a combination that works on your bow and gives you the same point of impact without having to match your method of shot execution (i.e. squeezing the trigger on the thumb release will hit in the same spot as executing the hinge with back tension). The UV Button's hook height and position are unique and pairing it with any release except the UV Hinge is far less likely (and it may not give you a similar point of impact with it, either). It may also require adjustments of d-loop length or even draw length in order to anchor comfortably with it. Both releases use a spring-gate to capture your d-loop and hang the release on it. The OnneX opens toward your face and the UV Button opens away from your face. One odd quirk of the Button some archers are encountering is the d-loop can slip between the hook and the spring gate if you draw the release at an odd angle. I've never had this issue because I draw thumb releases with the handle perpendicular to the string. The OnneX does not have that issue due to the direction the hook opens. Both the OnneX and the Button are good releases and if you set your bow up for either one exclusively, you should have good success whichever one you choose. That said, if you have to buy it sight-unseen, your odds of being able to set the release up in a configuration that works for you are the highest with the OnneX. As far as sizing goes, I have printable PDFs on my website (www.artandarchery.com) and www.stanoutdoors.com does as well that you can print you and get an idea of what size you may need. I'm not familiar with how gloves are sized in Australia, but I wear a size Small glove and a Medium OnneX fits my hand perfectly. I think that about covers it. I hope I was able to help you along in your decision. If you have any other questions, please feel free to ask. Take care, stay safe and happy hunting. ~Andrew
You are a HATER! They should put out of business!
I just recently bought a hinge gen 1 and cant find the different hooks for sale anywhere because they're discontinued. I know this is an older video but ,if you happen to see this, do you happen to know if any other hooks can be interchanged with the gen 1 hook? The standard hook, .20 or whatever it is, is way too cold for me and I have to rotate so far from my anchor just to get it to shoot. I've tried adjusting it but definitely not enough to make it feel comfortable. Any help would be appreciated
@@alexisgon117ag hello and thank you for watching. I doubt there are other brands of changeable hooks (like the Stan MoreX line) that could swap into the Hinge 1.0. I think your best chance would be to join some online groups such as Archerytalk (which has a massive classified section you can access when you meet the requirements) or Facebook groups like Ultraview Junkies. I would be willing to bet if you post on either of those, you should be able to find a private seller who can sell you what you need.
@ajbholsters2035 That's a shame, but I guess I just have to roll with it. I'll check out those groups you mentioned since I didn't know they existed. Thank you for the help, and keep up the good work on videos, I really enjoy them.
Why are you so jealous of Joel, good lord just stop being butt hurt. Just be you and don't worry about your feelings about ppl you don't know bud. You will be a happier person.
@@calebsmith1454 why is there an assumption that I would be jealous or "butt hurt" of a person when I am criticizing his delivery and his methods? I'm not competing with him for customers. If I'm wrong about him, explain why I'm wrong instead of going the lazy route and calling me "butt hurt". I explained in the video what I disagree with about his methods. If all you got out of that was I'm envious (of what I don't know) then this might not be the channel for you.
I have a question. i have the Resistance Onnex. I set the trainer pin, took a practice shot, and now my release would not reset. the hook would not hold on to the d loop. please help
@@ZaheerFirdaus thank you for watching. I am not certain what is happening there, though it sounds like the internals got stuck. If you push the thumb peg up towards the top of the release (opposite direction of pulling to engage the draw safety) the hook will open and go slack. You might be able to press it closed while pushing up on the thumb peg and reset the mechanism. If that does not work, I would contact Stan and let them know you are having an issue. I hope it works out.
Whats the dimension of this compared to the hinge 2. is the length of the seer portion the same?
@@rmvb619 hello and thank you for watching. The Executive's finger beds are a little larger than the Hinge 2.0, and it might be a little thicker. I have PDFs on my website (link in description) that can be printed out to compare, but a TRU Ball medium is a little bit roomier than the Ultraview Medium. As far as adjustability, the Executive can be set much hotter than the Hinge 2.0 due to the angle the head sits when it is against the top of the neck. So it should be able to be set to whatever speed you might need.
Very good and detailed review man i want to lile this release but am loving my ultraview to much
@@acebuck3487 thank you very much for watching. I'd say both the UV Button and Ultimate Flex each have their charms and their places in the mix. I think the best thing going for the Ultimate Flex is the ability to have a "shorter than average" hook height. Other than that I think the Button Edges it out in most other metrics.
As an archer/bowman that wall in the background puts a smile on my face.
@@C.Adams82 thank you very much. I call that my "Wall of Impending Bankruptcy" 😂.
This channel should have more subs. Great content. I noticed when you gripped this it looked like there could be a possibility of interference with the middle finger on the string. With that head design looks like a tight fit. If that makes sense.
@@C.Adams82 hello and thanks for watching. The clearance between my middle finger and the hook is right when I'm holding it loosely, but when you get to full draw and your fingers are under tension and fully seated into the finger beds, they don't touch. I have small fingers, though, so somebody with thicker fingers might have more of an issue.
This release fits my hand and the way I grip my release much better than the Onnex. My middle finger kept pushing the head forward on it (L-XL). Could have been overcome but I don’t want to change my form or shot process to accommodate my gear. The Lynx does lack some features that are nice to have but I quickly forgot all about them after shooting for a bit. Resetting the hook became part of my shot process and helped slow me down a bit which I needed. Fits my hand great and accommodates how deep I grip it in my middle knuckles. Adjustment is super easy and more fine-tune than one would think, at least for me anyway. The big problem I’m having right now is the click just stopped working (fast click) after only two weeks of having the release. I’m about to find out how good/poor Stan’s customer service is. Another great review! Always appreciate your content.
@@acohen5267 thank you very much for watching and for your impressions of the LynX. It's taken over as my primary hinge because its shortcomings (i.e. lack of micro-adjust sear and no hook return) are outweighed by its strengths (good ergonomics, thumb peg adjustability, head angle conducive with most styles of grip on the draw). Stan responded to my email asking about the hook return fairly quickly, and when I asked for updates on the Onnex Hinge click hooks, they were pretty responsive. So I think they should take care of you fairly quickly. So far my clicks haven't worn down, so I'll consider myself lucky. Thanks again and if you feel like following up and letting me know how your experience goes with Stan's customer service, I would appreciate it so I know they're taking care of their customers. Take care, stay safe and happy hunting 👍
@@ajbholsters2035absolutely will follow up with ya and thank you for your reply! Even without the click, I will continue to shoot this release joyfully. It is the best I’ve shot to date. Who knows, maybe no-click is what I need right now. Thanks again!
Update. Spoke to Stan today and they are sending me a new fast-click sear. The guy I spoke with was super nice and seemed genuinely bummed I have this problem. They are handling it no problem which is awesome. My Ex Okie custom barrel arrived today and installed. Had it made 3-16” longer to help my fat thumb from rolling over. This thing is a serious unit now! Keep up the great content as you are able and stay cool.
@@acohen5267 that's very good news. I'm glad they got you sorted out in a prompt and courteous manner. It's always nice when a company takes care of their customers and backs their products. Thank you for the follow-up and I hope you have a pleasant evening 👍
Never drive while texting...nor while engrossed in fiddling around with a new gadget. re: 16:30
@@jthepickle7 good words to live by 👍
@@ajbholsters2035 A word to the wise is sufficient.
this is a great review. I am a left-handed shooter and after purchasing my UV slider it took them 6 months to ship me the sight and you can imagine my disappointment when i received my sight and it was the upside-down version of the right-handed sight. This made me feel like a second-class hunter and left disappointed in UV as there was nothing on their website showing this is how the left-handed version was made.
@@konnerlee5708 thank you for watching and for the kind words. I couldn't agree more. I still can't figure out what they were thinking. I know the left handed market is small (I'm also left handed but I was taught to shoot right-handed), but if they are going to cater to it, then it should be with a purpose-built product and not a cop-out like this.
Ya gotta love English when it's spoken good. To satisfy a need to 'make-it-my-own' and to improve the store-bought, I remove the grit from 30-grit sandpaper, and with 5 minute epoxy, glue the grit where I feel it to be necessary; thumb button. This gives me very positive feedback and is, absolutely, non-skid. (am awaiting my Stan Click, just sent for)
@@jthepickle7 thank you for watching. I try to put on my best "narrator" voice when I record my videos 👍. I imagine 30 grit sand paper grit glued onto the release would certainly improve your purchase on it without adding to the thickness of the handle. Excellent suggestion 👍.
Excellent setup and great microphone sound pickup. It's incredible how you can really hear these arrows flying in to hit the target. This is the best video I've seen. Very nicely done!
@@rickp5647 thank you, Rick. It's surprising how much noise they actually make. I just shot more footage last night with 5 different kinds of vanes (same arrow shaft for consistency's sake) and every one of them you can hear it coming from 50 yards away, not to mention the sound of my bow. It's no wonder deer jump the string 🤦.
Love all of your videos very interested in consistency videos and will you be doing a video on the uv knockoff
@@anthonypiertosanti9692 thank you for watching. Yes, I am writing the script as I wait for my UV Button Copy to arrive from China. In the mean time I'll be posting some more sound testing of arrow vanes.
I can not wait until you do the video of a bunch of different fletchings. I’m excited for it.
It’s literally silent. I shot one next to my cousins ironwill fletchings. And they were way louder than my AV2. We were just standing obviously at our bows and listening though not down range this just solidifies it for me. Thank you for this video.
@@MrChiumiento my pleasure. I look forward to doing more testing. Not exactly scientific, but it's fun 👍.
That sounds really quiet👍
Thanks for watching. They're definitely quieter than my Bohning Ice Vanes, which buzz a little when they fly by. I'm fletching up more arrows with different vanes to see how they perform and will post more footage as i get it. It's not exactly scientific, but it's fun 😜.
Great review! As always. What screws did you use to replace the stock screws?
Thank you for watching. I used 6-32 x 5/16" socket head cap screws. They allow for a larger Allen key and aren't nearly as fragile as the stock screws.
As always great critique, you are so articulate in giving your presentation of a product, which includes up front honesty. Look forward to more video reviews.
Thank you for watching and for the kind words. I'll get them coming 👍
We hear this a lot. while I agree consistency is of great importance, in situations other than indoor target archery there's more to unpack then simply doing the same thing every time. A perfect example is large variables in yardage if I do the same thing at say 60 yards as I do at 20 I'll end up with less then perfect results. The same goes for uneven ground, up and down hill shots, shooting in the wind, ect. My opinion is we should make what we can repeatable and remain open and flexible to changes based on circumstance.
@@brooksmaxey9745 thank you for watching. I'm not certain where we are at a disagreement. Of course there are variances when encountering uneven ground, uphill and downhill targets, etc. I haven't gotten that far yet. In order to be able to hit a target more than once, regardless of how far, what angle it sits, or what you're standing on, you have to be able to supply the same input to the bow more than once. That's the point I was trying to make, and there are methods and drills that can be employed to make it easier to accomplish.
@ajbholsters2035 I don't think we are in disagreement. I'm just adding some points to the discussion. Look forward to what you have coming up.
I disagree other than having your sight set up for different distances, consistency will remain the same except for the distance factor, which will widen your groups. It's all in form; confidently repeatable form. Now wind, I will agree can be a problematic affect.
@nwbhc you anchor in the same place at 20 as you do at 80? If so you're certainly missing low. My anchor at 80 drops down to my upper neck. Other parts of the shot must remain consistent my point is that you must have repeatable shots not just one. The base and fundamentals stay the same but a bow shot in the circumstances I outlined will be held differently with pressures pointing in different direction so it will inevitably feel different. As a base repeatability is key but I challenge any one to draw and aim at 20, then without letting down direct your aim to even 50 and come back and tell me it didn't change things. This can also be done with a slider. Set your sight to 80 and draw back and aim at a 20 yard target through your peep you'll be looking over the top of your housing.
Have been using mine for a few days hard. Like how it follows the lines of the release and it looks very cool. Heavy was what I wanted and it's got nice weight. the real deal for me is that the barrel goes up further and over the release and that makes it so I can just pull through a shot rather than hit the thumb purposely. Not sure that makes sense I'm bad at explaining but f'kc I like it. Needs to be a darker color.
@@brianlew9559 thank you for giving it a try. I'm glad it is working well for you 👍. Your explanation does make sense. I adjusted mine recently to a position I can't get with the stock components, so it does offer some unique options in terms of adjustability. I'm not sure his plans on colors, but it wouldn't be the first time the subject has come up.
Hi, if you want the release to have some travel before firing, how much can you have? I tried it on my Stan Shootoff and the available travel is tiny compared to a hinge. Are there any releases that do allow you to have travel, other than the Onnex Click - I understand the click is not optional on that?
Hello and thank you for watching. Other than the OnneX Clicker, the standard OnneX thumb allows a little bit of travel, though the adjustment is on a cam system and it's limited. The OnneX Clicker 's click can be disabled and used like a typical Onnex thumb, but that involves reducing the travel to where your starting point is "after" the click. Most thumb releases with travel adjustment can be set with some trigger travel, though I'm not sure of any that have as much as the Clicker. Offhand the ones I've tried out of my collection that have a decent amount of travel are the Hot Shot sear activated thumbs (X Spot, Ember, Hookup, Tempest, and Eclipse), TRU Ball Ultimate Flex, TRU Ball Blade, UV Button, and B3 Versa, versa pro, and Omega (all versions).
@@ajbholsters2035 That's very helpful. Thanks for getting back to me. Really enjoying the videos.
Was this release the one you said you changed your screws in it? If so what size are they? I would like to change mine.
Yes, all my OnneX's I use I changed the button head screws that hold the thumb barrel post to the trigger stem with 6-32 x 5/16" socket head screws and the screw for the finger extension to a 6-32 x 3/8" (iirc) socket head screw so I could use a larger Allen key on it without damaging it.
What screws exactly did you switch for your OnneX clicker? What size and thread were they. I know you said 6-32
I changed the button head screws that hold the thumb barrel post to 6-32 x 5/16" socket head screws and the screw for the finger extension to a 6-32 x 3/8" (iirc) socket head screw so I could use a larger Allen key on it without damaging it.
I have to say I love when I find someone like you on RUclips. Doing unbiased reviews that are for the benefit of us and not for yourself to get views and money. Mindful hunter is the only other person in archery on RUclips I can think of that is like that.
Thank you for the kind words. I am glad you are finding my videos helpful, and I'll give Mindful Hunter's channel a look.
Could you so be Favor and do that arrow sound with your camera with an arrow with Firenock Aerovane 2 fletchings on it? If you would like I can build you an arrow and send it to you. It would be built completely with Firenock components and with the aero concept 1.0 system in it. Please let me know I would love to see these in your video. I move in southern central mass.
Thanks for watching. I actually have a pile of arrows in my basement with AV2's fletched already. I'll bring some to my next range visit and get some "flyby" footage and post it up as soon as I can.
I agree with the over complicating things to make himself seem smarter. I use this on people I can always tell are not very smart. 😅
Thank you for watching. I agree. It's a mark of intelligence to be able to explain complex concepts in relatively simple terms, but the simpler you make it sound, the less people are willing to pay for it 😜.
The Onnex now comes with both thumb barrels and post sizes, unless there's some crazy eeextra long one
You are correct. The OnneX comes with a short and a long-er thumb barrel post, and there is an Extra-Long post available on the website. They're only 8 bucks, so I might order one to see how much of a difference it is.
@@ajbholsters2035 oh thats crazy, i tried the long one from the get go and it was wayyyy too long already, can't imagine what sort of bear-handed behemoth would need an even longer one hah
@@JulzA89 if I had to take an educated guess, the extra long post would allow somebody to settle the thumb barrel into the base of the thumb with a fully flattened hand, or it could put the thumb barrel up above the tension screw similarly to the HFE-1. There was enough of a demand that they chose to make one, so somebody's bound to be finding a use for it.
Thanks for the review, would be interesting to get one, but unfortunately he is not yet shipping outside US.
My pleasure. Thank you for watching. I'll remind him to get that set up.
dont see why this would not work on a stan Perfex where it bolts on it looks the same. I have 3 stan perfex 2 thumb one resistance but dont own the onnex
Thanks for watching. Unfortunately the trigger stem on the PerfeX is a lot smaller. The OnneX is essentially a "beefed up" PerfeX, and the trigger stem and the hardware are much larger.
@@ajbholsters2035 thx for letting me know I was about to order one willy nilly, and I like watching your stuff man thx for sharing
@@jasonard7227 my pleasure and thank you for checking out and supporting my content 👍
Will this still fit into one of your current holster designs?
Hello and thank you for watching. If you set this flush with the back of the release, then it's not going to fit an existing holster without modifications. The way I have it set in the video (and on the one rotating in the corner) does fit with enough clearance to rotate it down even further. I'm probably going to end up doing a "signature series" or some such variation if the HFE 1 becomes popular and there is demand for it.
It is definitely nothing to behold aesthetically, but function > appearance in this game.
Agreed. I often think of myself in similar terms 😜. It looks like the T800 had some input in its design, but as you said/wrote, form fitting function can trump aesthetics.
Hmm. I'll bite. I like the added weight it could bring too. Needs a black version please.
Thanks for watching. I should have weighed it to see how much it adds (less than an ounce, maybe 1/2-3/4 would be my guess). The OnneX is fairly heavy for an aluminum release and the HM is a beast, so if you like heavy then it's a good addon As for a black version, that is something I suggested. Not sure where he sits on that subject at this time. He's a subscriber, so he chime in.
I need to find someone that has a 3 finger hook up to try.
Thank you for watching. The Hookup and the Ember are a nice evolution of their design. Not a sharp edge to be had on them, and the hook orientation makes it easy to set.
It's a neat concept. Would be cool to see it offered on other releases or the thumb barrel separately
Thank you for watching. Both of those things (thumb barrel separately available for purchase and offering designs for other models) are being explored and developed.
What a well thought out video... sir thank you...🏹🦌🏹
Thank you so much, and thanks for watching. I'm glad you enjoyed it 👍
Just recieved my HBC Holster. Fantastic quality! Thanks v much from the UK 👍
Thank you very much. I'm glad you like it and I appreciate the support 👍.
I like how you measure the head release angle with a protractor. That's a great point of reference. Would you have a recommendation for a release similar to the Carter Atension? Their obsolete, but I really like the back sweep on this release. Thanks, great video.
Thanks for watching. I'm going to have to expand on this idea at some point (maybe as it to my sizing guide sheets or start making spreadsheets) when I find the time, but it's definitely something to look for when a new product comes out. As for a release similar to the Carter Atension, are you looking for a Thumb or a Hinge? If you like releases with an aggressively swept-back handle, the Scott Select and the TRU Ball "Flex" models of hinge can be set with a lot of sweep (Executive Flex, HBC Flex and Fulkrum Flex). For thumbs, the Scott Apex, Scott Apex Core, Carter Just B Cuz or Insatiable, and the TRU Ball GOAT, Blade Pro Flex, Trident Flex, and Ultimate Flex have a similar sweep to the hinges. I'm sure there are others, but that could cover the most aggressive handles.
So you definitely suggest the original over the 2.0?
I think the original Arojac is more effective than the 2.0. The rubber or whatever new material they used for the arrow clamp on the 2.0 does not grip as well as the original, and the original has a much longer stroke than the 2.0. it's bigger, heavier, and clankier than the 2.0, but the damn thing pulls arrows better than anything else I've tried. They should have just refined that one instead of trying to make it smaller.
I absolutely always appreciate your reviews man! Keep up the good work! I am looking to upgrade to either the Ultimat Flex or the Stan Onnex T. What are your thoughts?
Thank you very much for watching and for the kind words. I'm really glad people are finding them useful. That's a tough call because I like both for different reasons, but I think you get a lot more with the OnneX than the Ultimate Flex. The OnneX comes in 5 sizes, and the sizes change in all dimensions, including the handle thickness and finger attachments. So it's going to give you most "fitted" feel of any thumb release out there. The Ultimate Flex has a nice feel and is very well-constructed, but the trigger on it feels like that of cheaper thumb releases (no wall, no crisp break, low-medium trigger tension). The OnneX is a descendant of the PerfeX, and has a phenomenal trigger that can be set in a variety of ways from light to heavy and from a crisp break with almost no perceptible travel, to one with more travel and a softer, less-defined break. On top of that, the OnneX comes with 3 and 4 finger attachments, large and small thumb barrel, short and long thumb barrel post, the Allen wrenches to make adjustments, and a trainer lock pin so you can use it for draw and letdown drills. The Ultimate Flex comes as a 3-Finger with a multi-axis thumb barrel. That's it, and it doesn't come with any tools. It does come in medium and large, but the Flex finger is the same on both, and the difference is hard to spot if you don't have them next to each other. So I think I just wrote myself into recommending the OnneX over the Ultimate Flex. I know it's been out for longer, but I saw a lot of people using the OnneX at TAC Seven Springs, but I didn't see anyone using an Ultimate Flex (other than myself). If you have any questions, please let me know, and good luck with your search for a new release. If you do choose the OnneX, I would recommend going with the Clicker over the T because if you decide you don't like the click, you can adjust the travel to disable it. I think that about covers it, but if there's any other info I can provide, please let me know. Take care, stay safe and happy hunting 👍.
@@ajbholsters2035 Wow thanks for such the detailed reply, you talked me into going with the Onnex C. Happy hunting as well. Hoping to arrow my first archery elk come September with it.
@@buckconnolly1820 my pleasure and good luck on your hunt 👍
How's it going? Looking to get my first thumb release. Interested in the onnex or the whisper 2. Coming from the hbc flex. I tried it as a 3 finger, tried the 4 finger, went back to 3 finger. Eventually settled on shooting it as a 2 finger. Just makes everything easier and repetitive for me. Wondering what your recommendation would be?
Hello and thank you for checking out my content. Between those two, the OnneX and Whisper, I think I would go with the OnneX, as I've found the OnneX pairs up to the HBC Flex very well. So your anchor may feel the same between the two releases. The OnneX has a greater range of adjustability in terms of trigger travel, tension and configuration (2, 3 and 4 finger, sweep adjustable, and a multi-axis thumb barrel). The Aluminum OnneX isn't significantly more expensive than the Whisper 2 to boot. The Whisper feels good in the hand, but I don't think it's in the same category as the OnneX.
@ajbholsters2035 appreciate the response. I've had an opportunity to check out the onnex, though never fired it. Feels nice in the hand. The whisper 2 caught my eye because of the short neck. I'm at 28" dl, so giving some up is not an option. Thanks again and keep up the cool content
@@stormchildkennelsjasontrac6749 my pleasure and please feel free to reach out if any time. If you can get your hands in the Whisper, you might find you like it better, but you shouldn't be giving up any draw length with the OnneX given you are set up for the HBC (they're very close to the same hook height if they're not the same). There's literally something for everyone when it comes to handheld release aids.