Видео

Can I connect my Bambu ams and dehumidifier somehow? Thanks! Great video

Number 6 is clog itself

Don’t you dare use a screwdriver. Ok, use a screwdriver. 🫠

When I auto level it the bed comes all the way forward and makes a clicking sound any tips?

I love it for ski and snowboard photography. I need fast focusing for my a9 and it always nails focus

Bro hsd knee surgery

Would you rate this over Apples own USB C Keyboard?

This is a great video. I’ve also found a butter knife can help flip open that front lever. Two other big things to do that people forget is changing the nozzle size on the machine in the settings and change the nozzle to a slicer, and you will have to re-slice things if they were done slices. This is critical for success and no damage. While you’re doing this nozzle swap, it’s also a great time to tighten the three black screws behind the nozzle. They come loose overtime and for sure affect your first layer.

This is a great video. I’ve also found a butter knife can help flip open that front lever. Two other big things to do that people forget is changing the nozzle size on the machine in the settings and change the nozzle to a slicer, and you will have to re-slice things if they were done slices. This is critical for success and no damage.

so where is the review?

I've had one of these since January. I've been loving it. Over that last 3 month it's not been getting any solar charge. I know I'm in the UK and the sun is a myth to us. But when i took the camera to charge i noticed that water has gotten under the top of the solar panel.

anyone else like myself that wants a neptune 4 max and cant afford it?

I asked the lawyer to give you my debt. :D

what the hell are you all talking about!! NOZZLE IS THE SMALL TIP. You are replacing A WHOLE HOT-END!! And if I'm wrong then I reject the truth itself because this is so stupid and outraging, the TIP should be like a small SCREW, swapabble in 15 seconds, but this shit with replacing whoel hot end especially in P1/X1 and removing fan, cover, heater, thermistor, then reatachinng them again, is UNACCEPTABLE and I'd rather buy second printer than do this shit many times a week. What a stupid idiot came up with this garbage.

The Loading and unloading part doesn't make sense. You already know from the start that there's extra filament left and it's where the filament was cut. Loading and unloading will leave you with the exact same state except its a "newer" filament --which doesn't change anything. So doing that was just to a lot of time and filament to achieve basically nothing. The only step needed was the part you told us not to do from the start, --that you did in the end anyway. SMH.

I don't get your modification when you print the print head only goes up it never go down

Have you had any issues using Elegoo filament in the Bambu AMS? I just got into 3d printing and saw a video saying that some of the cardboard ones can cause issues in the AMS. Thank you.

Had this issue, considered new hot end but an hour with a hot air gun and screwdrivers hot it all off. The Olly casualty was the wire insulation melted on the thermistor, some kapton tape sorted that. Runs fine again

Thanks for the blob tips! Support has been emailed, and now we wait. Appreciate this informative video.

Thanks!

haha its funny when you said tactical switches I was left with all kinds of interesting ideas XD funny how stuff works in the brain.

Thank you vry much. There is only 1 other youtuber who talks about the spool upgrade and turns out he is selling it as a product, not even as an stl file, but a ready printed product. Anyhow I designed my own spool and sensor holder, I was just missing the cables. Thank you!

Is it comfortable for back sleeping? I mean isn't the strap too bulky?

For uninterrupted recording on Eufy e340 floodlight & s330 solar cams, what matters more... Internet speed or Wi-Fi 6e or 7 router? And what upload & download do u recommend?

Meh I just pulled mine straight out 5 minutes after a print.

I just got my neptune 4 plus and the head is slamming into the print bed any time I try to level it. then it comes back with the firmware message you showed on your video. it has left a notable indent on the print bed. thankfully I didn't have the plate on it.

I'm both a D&D gamer and an AFOL (Adult Fan Of LEGO). I agree this is a great set. It's fun to build and looks great on display. Not only does it include one of the most impressive dragons LEGO has ever done and some very cool other monsters (the beholder, owlbear and awakened tree in particular), it also spans more settings than practically any other LEGO set: a tavern, outdoors, dock, dungeon, cavern and ruined castle. The dragon does have a flaw beyond the loose lower jaw however: its head and tail droop. One of the ball joints in the neck and the tail where it meets the body lack the friction needed to keep those body parts up. That's an unfortunate design error that LEGO really should have fixed. It illustrates the danger of relying too heavily (no pun intended) on computer modelling vs real world testing.

Have a Neptune 4 Max. My second printer (first was a Bambi Lab X1C). Just had a weird print fail… grinding noise woke me up, the long part fan is impacting the edge of the part. Because the part is a large flat piece that covers most of the bed, no way to rehome. Can’t restart after pausing because the print head seems to be lost.

Bambu Lab sent 4 rolls of defective filament to me. And only offered to compensate 1 roll. Disappointing aftersales service.

Yes, Dave you are awesome. Funny as well.

I recently got a Neptune 4 Max and tried many brands of PLA but Elegoo PLA just works best with it. No issues whatsoever.

The Achilli's heal on these cameras is not resolution, but connectivity. I am seeing a fair amount of complaints on Amazon, but in fairness, no more than any other wireless solar cameras. I have had literally 40 of these type of cameras over the years and connectivity tends to be an issue on all of them and this is irrespective of your home network quality. Mine for example ... I have 1gb network, wifi repeaters all over and monitor its health which is always A+, but still the cameras tend to be mostly good, but not as good as wired cameras.

I'm definitely watching just because you're so awesome. And handsome. You're both.

You can just unscrew the little plastic "T" bit directly above the heatsink. It comes out just enough to make the filament stub not get caught on anything.

Can I have a link to the Prusa profile? I can't find it.

Sometimes is is simply disconnected from Mac and if you don't have a second keyboard at start up to plug in, there is no way to access your Mac. It does it just like that. Also it would not hurt for Logitech to make a full video on how to explore all features.

You can speed up cooling the nozzle by turning on the fans - it moves so much air around the nozzle it helps it cool quicker since the tip of the nozzle is getting blasted by cold air. EDIT: I forgot to ask - how do you remove the cover to all of this without damaging it? I see spots I want to pry at but not going to take chances this is my baby.

HomeKit capable?

please slow taking down

or just use Orca slicer and not be behind the times

Mine just hung itself on the extruder cable and ruined the Y and X axis wheels on only its second print.

I’m very annoyed because I just bought mine 2 weeks ago I needed to change the nossle 12 times and then my heating element almost burnt my house down because the wires on the hotend short Circuited and not I need a new extruder

I just got my Neptune 4 Pro, and I'm quite happy. My first printer, bought it at about half msrp. I feel like its a really good starting point in 3D printing, and if i continue I can always get another printe.

My problem is that my nozzle hits the print and starts making spiderwebs what do I do to fix it

This looks great! Love the no subscription. That "feature" is a killer when it comes to other options I have seen. I do have a question though. We are having work done at our house and currently, there is no internet set up but I would like to have something like this to keep and eye on things. Can this be setup off say my hotspot, set the parameters I want and then leave it to record? I know I wouldn't have any of the connected features while I was away from it, but I head there daily so I could check the footage each day for motion events. Thanks Dave.

Amore common blob of dead is that the wheel falls off and jams the bed - but the printer keeps going while the bed stays still.

One thing you can't do with AMS,change a colour during print.

Slow down please. Not a word about actual nozzle swap..

Forgive this question, but I have looked as so many keyboards I am nearly blind. I am looking for a QUIET mechanical keyboard. I’m 71 yrs old and have Parkinson’s Disease, so the usual apple magic keyboard doesn’t work for me. Is this a mechanical keyboard and will I get a more tactile feel than with the apple wireless keyboard ? Thank you so much for your opinion