Видео

Yes. Every zone of every pad that is connected to the M12 can have up to 4 layers / samples / repeating notes.

🙂

@@timandrew1091 you’re correct. The reason being this video is just about getting the trigger settings correct. Nothing else.

No problem. Thanks for watching. Its even better now with the V2 firmware update!

Totally, but that's not to do with the M12 - that's to do with whatever DMX Controller you are using.

You also risk frying the output stage of the mixer as the EAD uses non standard phantom power through input B to power the sensor.

@edruminfo yes but It dosent backfeed, I checked with a meter, works like a charm.

The Rec'n'share app will allow you to use the track splitting function 10 times before the app needs connecting to a Yamaha device to be 'topped up' with another 10 times. This can be the EAD, or and current DTX model or a few other Yamaha amps and mixers. If you dont use the track splitting, you can carry on using the Rec'n'share app without any restrictions.

@edruminfo thanks! Have a nice day.

Good. Pleased I could help

No problem. Thanks for watching.

You can add music from anywhere AS LONG as you have a physical file of it. It wont work on streaming sites (it is against the licensing agreement) but if you have a file (wav, mp3 etc) of the track, it will work.

@@jameeldababneh4757 Exactly. The heads will work. The rims won’t.

@edruminfo but the snare input can read both piezo/piezo and piezo/switch right?

@@jameeldababneh4757 Correct

@@edruminfo thank you for your help🙏🏽 will this be the same case for the older dtx502 module or will the xp80 pad work as dual zone toms on it?

@ Hi. No problem. The same I’m afraid. If you want 3 zone toms you need to look at the DTX700 and DTX900 modules.

No problem. Pleased it helped

I don't quite get what you mean. Yes, you can use this to mic the whole kit. Yes, you can send it to the FOH mixer. Yes, you can listen to yourself as a monitor at the same time. I personally wouldn't go mono - you'll get a much better audio experience if you monitor in stereo, and the same for FOH but it depends if your PA is in stereo or mono I guess.

@ you got what I was trying to ask. Thank you for responding.

Hi. Yes it is, but what are you trying to achieve? You can use both simply by plugging the outputs of both devices into a mixer and doing it like that. Then you'll have the combined outputs going to the Front Of House. You can do more using MIDI, but there's no point unless you have a particular task you want to achieve which cant be achieved by the two products separately. If you can give me more of an idea about what you need to do, then I might be able to help.

You certainly can. Works great!

@@edruminfo can you make a short video? DTX is still being sold at Thomann! 😁

@@samsschool3639 You dont need a video. Just connect the USB 'To Host' on the M12 to the DTXpro or DTXproX USB 'To Device' with a USB cable. Turn on USB Trigger Link how I show in the video above. Thats it!

@@edruminfo Wow! thanks for the advice!

​@@edruminfoWorks perfectly!

Use a smaller drive, but also have you unzipped the file?

Yes eventually I realized that I hadn’t unzipped the file and it worked, thanks Simon

No. You load the update to a usb drive and put that in the module. No midi cable. No connecting your computer to the module. Just a usb drive.

Oh perfect then. Thanks Simon!

On DTXproX, yes, but DTXpro, no, I'm afraid. However, it's pretty easy to come up with a decent snares off sound using the internal sounds of the DTXpro.

@edruminfo do you start with a tom?

@@williamblake one of the Jazz toms (10 or 12" depending on what you need), yes, and layer it with a Timbale.

This is great updates, thank you Simon!

You need to find a friend with a computer and get it from them on a USB drive. Doesn't really work without a computer I'm afraid. If you can use your phone as a USB drive, that might work, but depends on the phone and the operating system.

You misunderstood. They DO have 2 zone tom pads and 3 zone snares on the DTXpro and DTXproX modules. However, the previous model (DTX900 and DTX700) had 3 zone toms (head and 2 rims) which use a completely different wiring system which it did not make economic sense to move over without the prices of the new kits rising dramatically. The DTX8 and 10 have exactly the same amount of zones as the equivalent Roland or Alesis (in some cases more). Just because you tried one iteration of the 6 range of kits, which does have single zone pads on the toms, and also has 3 zone snares as well, doesn't mean it carries on over the whole range.

@@edruminfo ah. Understood. Thanks for clarifying. 👍🏻 I genuinely thought the new tom pads were single zone only.

No one is forcing you to use the new ones. Use the older ones if you prefer them. They are still there.

Then use the old ones. No one is forcing you to use the new ones.

If you go to the start of the official Yamaha V2 Firmware update video, we put a list on the left of the screen, but I think thats DTXproX only and the kits are different on the DTXpro.

The DTX10 has stereo audio over USB, not multitrack, but to be honest I would do what everyone does, and use a VSTi library on the computer like EZdrummer, Superior Drummer 3, Addictive Drums or BFD. These give you much greater control and power than ANY electronic kit (even those who tell you they are as good as a VSTi!) and you control it via MIDI. Much easier, much better audio quality.

Hmmm... OK. Have you tried downloading the latest version of Rec'n'share (new version 7 days ago)?

@@edruminfo Yes. I have the latest version.

and I have found a few songs that do not say that, but when I click on them, it comes up saying Error: Failed to open the audio file. select another file.

@@SteveLyen I checked on mine and there's no issue opening from Apple Music, so I'm wondering if there's a subscription issue or something similar. I'm guessing you can listen to the tracks in the Apple Music app no problem?

One stereo cable, no controller

It's about as simple as it comes - go to the kit you want to copy, press Store, choose which User kit you want to copy it to. Use the + and - keys to choose the location. Press Enter. Press Enter again to confirm. Done

That would suggest the connection is not working, nothing to do with the app. Are you using an Apple adapter or a cheap copy?

@@edruminfo when attaching the G2 to the APP being recognizid the connection status windows pops up telling Genos 2; Delaytime 30ms; Total tracks 1 Track. did use 2 different: usb cables, Handys & 2 different lightning USB adapter (non apple). i wonder that all double parts causing same issue? is there something in G2 on settings available? like USB audio or whatever? i will purchase apple adapter too now

@@edruminfo i have a simple original apple USB (A) to lightning Adapter which is showing same issue (1 track only)

@@edruminfo interesting is that both channel LED indicator are showing correct signal of both channels

@@VogtThomas when it starts to use the internal microphone, that means the USB connection has broken. It could even be fluff (lint) in the lightning socket preventing the lightning connector from inserting fully. That can also cause it.

Hmmm... that doesn't sound right. Is the lower black part the correct way up? Which module?

@@edruminfo thank you very much for answering sir I am using yamaha dtx 6k3x I set the black thing just like you did I bought a used one though, so the sensor might be degraded a bit or maybe the stand's pedal But i don't know which one is the problem I don't want to buy both

I don't know. It depends if the phone is up to the demands of the app which are pretty high. Many Android phones are designed to do what the app requires of it. If you already have the phone, download the app and try it. Its free

Hi. Great! Thank you. Were we talking about recording without using a computer and I showed you the USB recording? Pleased you enjoyed it. Good luck with it, and give me a shout if you have any questions. Google the name in the bottom corner of the screen and you'll be able to find an email to get hold of me on. Cheers, Simon

Nothing at all! It works very well.