Видео

👍👍

Lots of food stuff which probably last longer than half of them power tools

That is an interesting store could spend a good few hours looking round.

Perfect for handles and knobs.!!!!!!… and as you say- prepping the wood to take away the heavy impacts will help it to stay in one piece.!!!👍

I may have to pop to Aldi for that angled ruler. Whether to make a special trip or just when passing. I notice same difference with batteries on circular saw, so always use the bigger ones for that. For tape measure, I think it was thefunnycarpenter channel that went through assessing a tape measure. the three tests that some to mind was how far the tape measure that be pulled out before buckling, Butted vs hooked measurement accuracy, and how far can you throw the tape out (to avoid walking around the other side of the wood being measured). Thanks for sharing the video, entertaining as always.

Bear with me this relates, I bought myself a WH45 pistol and I have a police type belt that has pouches where I put handy stuff, it had a holster on I am not sure if it was for a pistol or a Tazer but its really handy belt but the HW45 is too big for pouch/holster, especially with a laser/scope then I looked up fleebay and online dealers and to get a holster to fit that could be put on the belt and the prices were a bit shocking. However, yesterday my wife wanted me to pick something up for her and in Aldi, I spotted this tuff nylon toolbelt for about 4 or 5 quid with a pouch that makes a perfect holster that will take the scope, just pick the stitching out for the brand name, add a couple of pouches from police belt for extra storage and it has a clip for a hammer that takes a hand axe, it's perfect as a bushcraft/survival belt for a fiver and to buy something of the equivalent type from a sports shop would frighten any tight-fisted man like myself the holster alone to go onto a belt in this type of material would be probably 25-30 quid one in leather you will need to sell a kidney. I am actually thinking of going back for another one to rob other pouches off/spare clips and stuff it makes a great survival belt and all matching if anybody is into that sort of thing, so for a tenner you would get 2 belts and a load of pouches with spares and a gun holster that will take a pistol with a laser on or scope

Has anyone had problems with the parkside dremel type of multi tool not charging? Ive used mine 4 times and after the last time i just cannot get it to charge. It just flashes all 3 lights - red/ yellow/green but no matter how long u have it charging it work. Any advice on how to kick start the internal battery pls?

I do like ferrex tools but their 5Ah batteries fail within a couple of uses, especially if you use their angle grinders. The amps they draw screws with the balance between the cells and the 5Ah batteries refuse to charge after 1-2 uses. 😢

I know you like to hear of odd things from Lidl - I built a new smaller shed and was going to get portholes for windows - turns out portholes are very expensive! Soooo upon wandering the middle isle I spotted Lidl version round Pyrex style oven dishes, bish bash bosh a few days and £12 later I had 4 portholes with oven proof rating 😂

The angle bracket set @ £2.99 is great value (Aldi)

Hi pal, just so you know Ah (Amp hour) is not how much power, it's how long it last. If your 2Ah sounds different, probably not fully charged or problem with the voltage of the 2Ah.. The voltage is power.

No buying for a while and no tinkering. I'm off to have some surgery in the next few weeks, so I don't know when I'll be back in my workshop. Will still be watching though Rob.

Rubber and magnets........ reminds me of my honeymoon 😂

Have you thought about buying their Welders

Can never have enough tape measures. Always a bitch to find

What annoys me about both Lidi and Aldi items not being priced up have to keep on asking staff that's if you can find one, to ask.

Disappointed we didn't see you sporting the Parkside bumbag thats new in my local store this week 😂😂😂

Cant level the table, so no good, nice thought though, 💯

Very good 👍

Are all aldi's the same in terms of the middle isle, local aldi always seems rubbish for tools.

great video buddy ,i love the angle gage🤓🤓

The Pafkside 310 watt multitool (oscillating saw) is good value @ £15,99! The hard part.................................FINDING STOCK ! People are buying up the whole lot !!! Probably turning up on Ebay at a vastly inflated price !!!!

I must get one of the long scrapers. Like you, I've got a pick up truck and even if I lean over as far as I can (and get filthy in the process - it's a waste of time cleaning it in the winter as it gets dirty again in a day or two) I have a 6 inch bit in the middle of the windscreen and back window that I can't reach.

👍👍👍. Thanks Rob

Adventures with Anders his been going for 7/8yrs

those ferrex tools are worse than any Chinese tools 🤣 Ferrex Made in Sub-China

Fab video as usual Rob...I got the mini bit set and the longer spirit level. Great quality bit setr for £8.99!

Nice video....the only problem is you are going to bankrupt me as i like tools.🤣

I went to our local Aldi Thursday in the hope of getting one of those cordless angle grinders, they didn't have any, in fact they didn't have quite a few of the "new" tools, most disappointed. I'll go back this week and see what they have. Also went to Lidl and bought a few bits & bobs. Personal preference for tools is Ferrex (Aldi) I just prefer the colours grey/blue but having said that a lot of my tools are Parkside. For what I do they are just fine. Cheers!

What do you do when the ruber gets older and it's sticky and horrible to touch?

Do they have the ferrex batteries there ?

I'm barred from the middle isle's

Hi Rob, have you moved to the dark side........................ Going from Parkside to the Ferrex and Workzone alliance .................. You got some good stuff there mate, Impressed with the 4 amp/h battery the difference in power in your wood planner compared to the 2 amp/h. Like the compass that is hand thing to have, I must say you have spent well and it looks good for the money. As always good to see you and a great video catch you soon, have a good one and take care

Do the steel compass pins fit together, to about same length as the Pencil ?

Great video! I just saw the Parkside router at Lidl here but I passed since I have quite a few routers already. Always great deals out there though.

Recent purchase of ceramic heaters from local store reduced to £19.99. So I bought 2!

Nice one Rob good video.Been over and subed Marcs channel👍👍

spotting leaking pipes under flooring before you pull it all up !! ... the leak area will be colder than its surroundings .. 😎👍☘️🍻

Hey Rob.....well I still havent bought owt from lidl but my mate is giving me his lidl woodlathe.....so I will be able to do small stuff....he enjoyed making pens so bought himself an upgrade....... As usual thanks for the great presentation.....plus.....I dont mind your waffle ......it makes it seem like a mate is talking to you rather than some presenters talking "at" you........That compass is great.....will check out the other YT'ers.

I have reservations about using 12V tools for high current applications like Planers and Routers. It's probably better to consider Brushless tools running 18V or better (or mains tools).

Fun video as ever! Yes, the two for a tenner 4ah batteries is a real deal. I'll have to get myself down there to pick up a couple more. Now for a look at the RUclipsrs you mentioned.

That angle finder would be mint for boarding out inside of shed ends, when you have to find out the angle of pitched or pent roofs, those that know will get what I mean, I’d pay triple that price at times for that thing!! Anyone want to buy one and post it to me, I will pay double plus postage! 🙏👍

How parkside haven’t given you a sponsorship I don’t know maybe you should write or email them?

Aldi has nothing worth having their middle isle is abysmal better off going better off going to Lidl they have far more and a lot more variety and in most case it's also cheaper

Great video Rob. Well impressed with your choice of new tools. I've nowhere to put anymore stuff so I can only watch your videos and dream. 😂😂😂😂😂😂

I have only just discovered your brilliant channel, Rob. I’m so glad I did, too. I, too, am very much a shed head, but without a shed currently. Your channel allows me to do some shedding vicariously through you so I’m grateful to have found you. Thank you. (<- told you I was grateful! 😂) I look forward to going through your back catalogue and watching your new stuff as you post it. Thanks Rob, take care. 🙂👍🏻

2 weeks ago I bought the Ferrex palm sander and impact driver for £2.99 each , last one of each in store and boxes had been opened BUT they were brand new . Our Aldi didnt have the batteries but I have the ferrex range of tools and I already had the 20v/40 big batteries . Impact driver was spot on but battery didnt fit the palm sander , needs a thinner 20v only battery . Aint crying at that price , will just fork out for a small battery when I need to use it .

My wife says iam not allowed to have any more tools where is she going to get rid of them when I pass away it’s all junk to her

8:27 i call that tape the Mr.T 😂

At last, the middle aisle drought is over and the inflatable reindeers and fairy lights are once again consigned to a dusty warehouse 👍. Aldi have had some decent stuff lately, nice haul 👍.